|
| 1 | 1.1.1/P62) Removing the excavated materials,debris of any description and any other waste materials,spoil including loading into trucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at the earmarked places, spreading / levelling complete and disposalinside plant within 2 KM lead. |
| 2 | 2.8.1) Earth work in all kinds of soil in foundation, trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50 M. Disposed soil to be levelled and neatly dressed. Lift up to 1.5 m in all kind of soil. |
| 3 | 02.06.01/2.26.1) Earth work in all kinds of soil in foundation, trenches or drainsincluding dressing of sides and ramming of bottoms , lift from1.5m to 3.00m including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50 M. Disposed soil to be levelled and neatly dressed. Lift from 1.5m to 3.00 m in all type of soil. |
| 4 | 02.09.01) Earthwork excavation in soft rock / ordinary rock in foundations not exceeding 1.5m in width or 10 Sqm. on plan including dressing of sides and ramming of bottoms lift as mentioned above including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50m. Disposed soil to be levelled and neatly dressed.Lift upto 1.50m in ordinary / soft rock. |
| 5 | 02.09.01/2.26.2) Earthwork excavation in soft rock / ordinary rock in foundations , drainsincluding dressing of sides and ramming of bottoms lift as mentioned above including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50m. Disposed soil to be levelled and neatly dressed.Lift from 1.5m to 3.00m in ordinary / soft rock. |
| 6 | 02.01.01) Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed : All kinds of soil |
| 7 | 02.25.00) Backfillingwithselectedexcavated earth or any other materialsaround the foundations, under floors,pavements or any other places in layers not exceeding 20 cm, watering and ramming,consolidating etc. complete. |
| 8 | 02.27.00) Filling of sand under floors in trenches sidesof foundationsetc.including supply ofsand andwatering,ramming, consolidatingand dressingetc.all completeasdirectedbyEngineer-in- Charge. |
| 9 | 4.1.3) Providing and laying plain cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded 20 mm and down stone aggreagates) ,at all depths below and upto ground level inFoundations, fillings,non-suspended floors including tamping, curing etc. including the cost of centering and shuttering etc. as specified or directed in any shape,position, thickness and finishing the top surface rough or smooth etc.all complete(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.) |
| 10 | 04.01.05) Providing and laying plain cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded 20 mm and down stone aggreagates) ,at all depths below and upto ground level in foundations, fillings,non-suspended floors including tamping, curing etc. including the cost of centering and shuttering etc. as specified or directed in any shape,position, thickness and finishing the top surface rough or smooth etc.all complete (CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE.) |
| 11 | 05.02.02) Providing and laying reinforced cement concrete with RCC grage 1:1 1/2:3 (1 cement: 1 1/2 sand: 3 stone aggregate) work in foundation, roofs, slabs, lintels, beams,chajjas, columns,walls in vertical or horizontal fins, bressummers,shelves, suspendedfloors,landing, balconies, pillars, piers, abutments, posts and struts etc. in super structure up to floor five level (a hight of 20 metres from ground level), including necessary curing,as directed by Engineer-in-Charge but excluding cost of reinforcement, centering and shuttering etc. complete (CEMENT WILL BEISSUED FREE OF COST AT NALCO\"S STORE). |
| 12 | 05.09.01) Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, rafts of columns,plinth beam up to plinth levelas directed by Engineer-in Charge.Work in foundation and footing upto ground level in all shape and sizes.Work below ground level and up to plinth level , in allshapes and sizes. |
| 13 | 05.09.03) Centering and shuttering including strutting, propping etc. and removal of form work for columns, lintels, roof beams, roof slabs, cantilever beam/roof, chajjas, and similar types of work above ground levelas directed by Engineer-in Charge, up to all heights and in all shapes and sizes. |
| 14 | 05.22.03) Bending / Binding and placing in position high yield deformed bars reinforcement conforming to IS:1139 or cold twisted deformed bars reinforcement conforming IS:1786 for R.C.C.work at all height and depths,carting the same from store/issue points to site of work, straightening, cleaning,bending to requiredshape and lengths as per details including supplying and binding with contractor\"s ownsoft annealed binding wire and placing with proper cover blocks, supports, chairs, spacers and return of unused/ scrap/ unserviceablesteel to owner\"s storage point etc all complete. (REINFORCEMENT STEEL/TOR STEEL SHALL BE ISSUEDFREE OFCOST ATNALCO\"s STORE) |
| 15 | 06.02.02) Providing & layingBrick masonry infoundation up to plinthlevelin any shape including scaffolding, staging, curing, all complete in Cement mortar (1 Cement:6 sand) . (OnlyCEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE) |
| 16 | 06.34.02) Providing and laying Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level including necessary scaffolding, all labours,etc : withCement mortar 1:6 (1 cement : 6 Coarse sand).CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE) |
| 17 | 06.34.02) Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level including nrcessary scaffolding, all labour, etc : with Cement mortar 1:6 (1 cement : 6 Coarse sand) .(Cement and fly ash bricks will be issued free of cost at NALCO\"S STORE/ any issue point of NALCO) |
| 18 | 7.1.1) Random rubble masonry with hard stone in foundation and plinth up to 1.00 metre above ground levelincluding levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) .CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE) |
| 19 | 13.05.02) Providingandlaying 15mm thick cement plaster in cement mortar 1:6 (1cement: 6 course sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for a hight up to 10 metres from ground level.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE) |
| 20 | 15.2.01) Dismantling and demolishing cement concrete work including disposal of debris/ dismantled material lead of50 mtrs. as perthe direction of Engineer-in- Charge. |
| 21 | 15.03.00) Dismantling of R.C.C. work including stacking of bars and disposal of unserviceable materials within50 mtrs. lead as directed including cutting reinforcement bars fromRCC worketc.complete. |
| 22 | 15.7.4) Dismantling all type of Masonry, stacking serviceable materials at site and removing rubbish including filling in low lying areas ofPlant/Township/mines as the case may be etc. all complete as per direction of Engineer-in-charge (up to a lead of 50 mtrs) |
| 23 | 15.18.00)Dismantling steel work in built up sections in angles, tees, flats , chequered plates and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. at all hights, including dismembering and stacking within 200 metres lead. |
| 24 | 15.28.1)Dismantling of CGI/PGI sheeting work from existing buildings, stacking the same and disposing off the damaged sheets to the dumping area inside plant or shifting of the sheets to scrap yard up to 3 KM inside plant. all complete as per the direction of Engineer-in-Charge at all heights. |
| 25 | 13.18.00) ApplyingNeat cement punning on concrete/plaster surfaces with curing up to 7 days, including all labours, tools & tackles.(CEMENT WILL BE ISSUED FREE OF COST AT NALCO\"S STORE) |
| 26 | 13.46.01) Supplying , applying andFinishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm , including necessary scafolding up 10 m. hight ,all material and all labours, etc all complete. |
| 27 | 22.08.01)Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or peasized gravel spread at 6 cubic diameter per square metre including preparation of surface but excluding grading complete with :Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 . |
| 28 | 11.03.01) Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.of 40 mm thick with 20 mm nominal size stone aggregate |
| 29 | 13.60.01) Providing, painting with plastic emulsion paintofapproved make / shade as percolourschemeon walls on old / new surface etc complete.The works shall shall include the preparation of surface by sand papering, necessary scaffoldings, wire brushing, removal of scales and peeled off surfaces , filling the depressions,nail holes by putty andpainting uniformly without any patches andbrush markings.The area must be cleaned aftercompletionof painting work.For two or more coatwith new colour at all hight. |
| 30 | 13.43.01) Applying a coat of approvedwater thinnable cement primeronnew/oldcement plaster surface afterremovingthecolourwash/white wash &foreignparticlesrubbing with sandpaper , necessary scaffoldings,asdirected etc. complete at all hight. |
| 31 | 13.26.00) Applyingputty ( J K White putty or equivalent ) on the old/newwalls to give an even surface & smoothaftercleaning the colour wash/ whitewash/distemper with wire brush or sandpaper with allmaterials,necessary scaffoldings,tools & taklesetc. all complete at all hight. |
| 32 | 11.6.1) Cement plaster skirting up to 60 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick. |
| 33 | 11.26.01) Supplying and laying Kota stone slab of 25 mm thickness flooring over 20 mm (average) thick base laid over, for skirtingsjointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : , including all materials and labours etc.( Cement shall be issued free of cost at Nalco\"s store.) |
| 34 | 12.01.02) Transporting, fixing in position CGI Sheets/translucent fibre reinforced plastic sheet of standard sizes/PPGL sheets/ Aluminium alloy sheetsat all height,including taking delivery from NALCO\"s Stores for all works in roofs, walls gables, claddings and louvers etc. including all accessories like self drilling screw, stitch bolts limpet washers, bitumen washers etc. including cutting, mitering, drilling, temporary, scaffolding, staging with safety rules, all labours, tools tackles etc. all complete at all height.(CGI SHEET/TRANSLUCENT REINFORCED FIBRE GLASS SHEET/PPGL sheets/Aluminium alloy sheetsSHALL BE ISSUED FREE OF COST AT NALCO\"S STORE) |
| 35 | 12.04.1)Taking delivery from NALCO\"s Store, transportation to site and fixing plain GI sheet/ PPGL sheetof 600 mm widthat all height, for ridge, cornor pieces, flashings, north light curves bargeboards etc, bent to shape fixed with supply and fixing of approved self drilling screw, bolts, nuts. GI limpet and bitumen washers approved make, necessary laps, finishing, providing hooks, nuts, sitch bolts etc all complete as per specification and direction of Engineer in charge at all heights.(ONLY PLAIN GI SHEETS/ PPGL sheetsSHALL BE ISSUED FREE OF COST AT NALCO\"S STORE). |
| 36 | 10.02.00/ 1007) Transporting, fabricating,erecting and fixing Steel work welded in built up sections/ framed work at all height above ground level, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required, in columns, beams, trusses, purlins, gratings, girders, frames, guard bar, ladder, railings, brackets, gates, grills, doors, shutters , windows, ventilators,gutters , structural support for chimney,and similar works,including all materials and labours and scaffolding arrangementall complete as directed by Engineer in charge.( Required Structural steel will be issued free of cost at Nalco\"s store). |
| 37 | 12.11.00) Providing and fixing wind ties of 40x 6 mm flat iron section.( 40x6 mm flats will be issuedfree of cost at NALCO\"s store) |
| 38 | 10.6.1) Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover . |
| 39 | 10.7.0)Providing and fixing ball bearing for rolling shutters. |
| 40 | 10.8.02)Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 16.80 sqm in area . |
| 41 | 10.20.00)Providing and fixing bolts including nuts and washers complete. |
| 42 | 13.62.01) Supply and application of two coat of synthetic enamel paint of approved brand and shade on all kinds of structural works including cleaning of old surface etc all complete with all labour tools, tackles, consumables etc all heights as per direction of Engineer-in-charge at all heights. |
