|
| 1 | Demolishing brick work / Kharanga manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 2 | In mud mortar |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 4 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Providing and fixing of fly proof Stainless steel(SS) wire gauge to existing wooden/steel door/ windows /iron Jalli using S.S. wire gauge with average aperture 1.50 mm in both direction with wire of dia 0.50 mm including wooden fillets, nails, screws or nuts and bolts etc. dismantaling of existing wire mesh and shutter if required etc., all complete as per direction of engineer in charge. |
| 8 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with sand, with common burnt clay non modular bricks. |
| 9 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 10 | (i)Single socketed pipes. |
| 11 | 110 mm diameter |
| 12 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 13 | Bend 87.5° |
| 14 | 110 mm bend |
| 15 | 12 mm cement plaster of mix : |
| 16 | 1:6 (1 cement: 6 coarse sand) |
| 17 | White washing with lime to give an even shade: |
| 18 | New work (three or more coats) |
| 19 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 20 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 22 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 24 | Old work (one or more coats) |
| 25 | White washing with lime to give an even shade : |
| 26 | Old work (one or more coats) . |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 28 | One or more coats on old work. |
| 29 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 30 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 31 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 32 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 33 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 34 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 35 | Cleaning and de-silting of gully trap chamber, internal trap near wash basin,bath room etc.including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 36 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 37 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 38 | 10 litre capacity - White |
| 39 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 40 | Flat back wash basin of size 550x400 mm. |
| 41 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 42 | Flexible pipe |
| 43 | 32 mm dia |
| 44 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 45 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 46 | Credit of old un- serviceable/ serviceable materials recovered from dismantling / demolishing from work and available at site . |
| 47 | Old bricks recovered from dismantling of brick work . |
| 48 | Low level PVC flushing cistern/ tanks (10 litres capacity) |
| 49 | Cleaning and de-silting of chocked WC Seat, trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all complete as per the direction of Engineer-in-charge. |
| 50 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 51 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 52 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 53 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 54 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 55 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 56 | 15 mm nominal bore with 45 cm length. |
| 57 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 58 | With common burnt clay F.P.S. (non modular) bricks. |
| 59 | Cleaning of chocked G.I./CPVC water supply line by manual or mechanical means including removal of rubbish,sand,earth etc and disposal of same all complete as per direction of Engineer in charge. (A) Dia of pipe 15 mm to 32 mm . |
