|
| 1 | M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed. |
| 2 | M&L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed. |
| 3 | M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots touch up with putty as required placesand thereafter applying one coat of cement base paint complete all as specified and directed. |
| 4 | M&L for preparation of old surfaces of wallsincludingwashing, rubbing down and stopping of distempered and painted surfacesof wall and applying one coat oil bound distemper with roller complete all as specified and directed. |
| 5 | M & L for complete removal of existing treatmentby scrapping/ washing down with water and applying two coats of oil bound distemper over a coat of primer, applying with rollercomplete all as specified and directed. |
| 6 | M & L white cement based Wall care puttynot less than 1mm thickon wall/ceiling new or old surfaces of any description finished even and smooth complete all as specified and directed. |
| 7 | M&L for preparation of old decorated surfaces of walls any descriptionnot other wise described over 10 cm width or girth and applying one coat of Plastic emulsionpaint on wall and ceiling etc.complete all as specified and directed. |
| 8 | M&L for preparation of old decorated surfaces of ceiling any descriptionnot other wise described over 10 cm width or girth and applying two coat of Plastic emulsion paint on wall and ceiling etc.complete all as specified and directed. |
| 9 | M&L forpreparation of old decorated wooden surfaces of any descriptionnot other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed. |
| 10 | M&L for preparation of old decorated steel surfaces ofany description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | M&L for preparation of old surfaces of walls/slab projections by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spotsincluding washing down,with waterand applying one coat of 100% antifungal acrylic emulsion paint in approved shade etc all as per manufacturers instructions including necessary scaffoldings etc,complete all as specified and as directed. |
| 12 | M & L for cutting out cracks (not exc 5mm) to V-section in existing wall/chajjas and cleaning out and filling up with Dr fixit crack seal including necessary scaffoldingscomplete all as specified and as directed. |
| 13 | M & L for complete removal of existing treatment on surfaces of walls, chajjas etc by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spotswashing down with water and freeing the surfaces from all loose dirt, chalk, grease, fungus. Flakes etc applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer including necessary scaffoldingscomplete all as specified and as directed. |
| 14 | Taking down cement mortar or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD andincluding necessary scaffoldings complete all as specified and directed |
| 15 | Rendering 15mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls and finishing even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for rendering 5 mm thick in CM 1:3 as in ceiling finishing even and smooth (with out using extra cement) etc complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed |
| 18 | M&L forpreparation ofnew plasteredsurfacesand applying three coats of white washon ceiling etc complete all as specified and directed |
| 19 | M&L for preparation of new plastered surfaces of walls and applying two coats ofdistemperoil emulsion over a coat of alkali resistant primerusing roller etc complete all as specified and directed. |
| 20 | M&Lforfrench polishing on surfaces of any description width or girth and including cleaning and preparing the surfaces including a coat of wooden filler on old wooden surfaces one or more coat etc complete all as specified and directed. |
| 21 | Writing letter or figures (block, Roman, Italic, orIndian) n.ex 30 cm hight complete all asspecified and directed. |
| 22 | M&L stops, commas, short lines, dashes, hyphens, brackets,etc. |
| 23 | M&L for Removal of plantgrowth by injection with chemical glyphospate solution (4 % conceneration ) @ 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate (4% concent) diluted with 1 ltr of water. All roots / plants shall be removed completely and making good the distrubed surface and painted with cement base or acrylic paint all as directed by EIC. |
| 24 | Material and Labour for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick work or concrete surfaces and finished with 5 mm thickplaster, both coats to be mixed with water proofing compound @ 2% by weight of cement or as per manufacturers instructions complete all as specified & directed.Note :- Supply only water proofing compound shall be measured and paid separately. |
| 25 | M & L for rendering 15 mm thick on fair faces of brick/concrete surfaces in CM 1:4 finished even and fair complete all as specified and directed. |
| 26 | M&L 5 mm thickCM 1:4 ready mixplaster overconcrete surfaces of ceiling surfaces; surfaces finished even and smooth including necessary scaffolding complete all as specified and directed. |
| 27 | M & L for preparation of new plastered surfaces on ceiling and applying two coats ofoil bound distempecomplete all as specified and directed. |
| 28 | M&L for preparation of NEW plastered walls surfaces for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 29 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over a coat of alkali resistant primer.etc complete all as specified and directed . |
| 30 | Day to day repairs to WHB & WC with fittings like as leaking bib taps, pillar taps, mixers, stop cocks aby tightening and providing washer, repair to float valves, repairs to internal assemble low level cistern by adjustments, etc as required at site top the satisfaction of user as assignedcomplete all as specified and directed. |
| 31 | S&F in repairs readymade pulley operated clothes drying system incl of four aluminium pipes of 9 feet long each (4pipes)channel assembly locking system ropes and all fixing material complete all as specified and directed. Make Easy Dry or equivalent make as approved by CE Southern command Pune. |
| 32 | Taking down chowkhats or frame with shutters (without taking off shutter from the frames)exceeding 1.5 sqm but n exc 4 sqmcompleted as specified and directed. |
| 33 | Taking down Chowkats or frameswith shutters (without taking off shutter from the frames) not exceeding 1.5 Sq. M each |
| 34 | Taking down shutter of any descriptionexc 1.00but n exc 2.00 sqm eachcomplete all as specified and directed. |
| 35 | Resecuring or easing & adjusting without taking down door shutter of any descriptionexc 1.00but n exc 2.00Sqm each complete all as specified and directed. |
| 36 | Taking down door / window shutter of any description exc 1.00 but n exc 2.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed. |
| 37 | Taking down door / window shutter of any description n exc 1.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws as requiredetc complete all as specified and directed. |
| 38 | Supply & Fixing in repairs sheet glass 4.8 mm thick in glazing n exc 0.5 sqm each with rubber and aluminium beading/packing with rubber gasket complete as specified and directed. |
| 39 | Supply & fixing in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed |
| 40 | S&F 2nd class Hard Wood plain, solid straight chawkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, completed as specified and directed. |
| 41 | S&F MS flot iron as in hold fast and similar work as specified Gde Fe 410-0 or Fe 310-0. |
| 42 | M&L Flush shutters 30mm, solid core construction, with partical board core and ply wood face panels, commercial type on both sides complete all as specified and directed. |
| 43 | S&F 35mm 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters as specified in SSR, Part I, section -8, clause 8.20(a) supplied and fixed to chowkhats. |
| 44 | Supply & Fixing aluminium anodised XPM Jali, 0.45mm nominal dia with 1.4mm average width of aperaturecomplete all as specified and directed. |
| 45 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 46 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed |
| 47 | S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters up to 700 mm in width and of weightnot more than 35 kg and fixed complete all as specirfied and directed. |
| 48 | S&F stainless steel butt hinges 100mm size complete all as specirfied and directed. |
| 49 | S&F150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. complete all as specirfied and directed. |
| 50 | S&Fin repairs 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. complete all as specirfied and directed. |
| 51 | S&F 150mm length extruded aluminium alloy handles, fabricated type, anodised. |
| 52 | S&F in repairs 150mm length extruded aluminium alloy handles, fabricated type, anodised. |
| 53 | S&F 200mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed. |
| 54 | S&F in repairs 200mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed. |
| 55 | S&F 150mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed. |
| 56 | M&L 300mm, ordinary rat tail rod pattern springs including roller and roller plate mild steel complete and fixed in repairs complete all as specified and directed. |
| 57 | S&Faluminium alloy, anodised, sliding door of length 300mm, with hasp and staple (bolt type) and fixing clip of sheets, cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy and fixed. complete all as specirfied and directed. |
| 58 | M&L PCC Block for hold fast and similar work etc 1 : 2 : 4 type B-1(using 20mm graded stone aggregate) complete all as specified and directed. |
| 59 | M&L preparing surfaces of wood or wood based materials,any descriptionends of posts, backs of chowkats, etc and treating with tar or coal tar black paint area tarred exc 0.1 sqm but n exc 0.5 sqm each complete all as specified and directed.. |
| 60 | Preparing surfaces ofsmall articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats etc area n exsc 0.1 sqm each and treating with tar or coal tar black paint complete all as specified and directed. |
| 61 | M&L for preparation ofnew wood and wood based surfaes any description, not otherwise described oer 10cm width or girth one coat of pink primer and application of two coats of synthetic enamel paint on new wooden surfaces. |
| 62 | Dismantling floor, hearth or wall tiling any description and thickness including cement mortar bedding (but not backing) and removing rubbish off the premises. |
| 63 | M&L PCC 20mm thick type B0, 1 : 2 : 4 (12.5mm graded aggregate) in sub flooring complete all as specified and directed.. |
| 64 | M&L non-skidcoloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurryover and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed. |
| 65 | M&L glazed ceramic jointless coloured tiles in vertical surface 350x250x7mm / 450 x 350 x 7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3 complete all as specified and directed. |
| 66 | M&L non-skidcoloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurryover and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed. |
| 67 | S&F PVC cabinet mirror in repairs of size 600X450 mm complete all as specfied and directed. |
| 68 | Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified. |
| 69 | M&L for cement concrete type C-1, 1:3:6 (20 mm graded aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. |
| 70 | M&L Mirror 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plughs with chromium plated brass screws and cup washers in repairs complete all as specified and directed. |
| 71 | Dismantling stone slabs or pcc tiles of any description or thickness in steps, landing, flooring and similar work laid, bedded and pointed in cement mortar complete. |
| 72 | M&L, 18 to 20 mm thick machine cut and machinepolished Kota stone slab in single piece in jambs and in double piece in cills on vertical surfaces and over 15mm thickcement mortar1:3 backing coat jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing andmirror polishing and necessary edge mouldingbefor fixing of kota stone complete. |
| 73 | M&L for 20-25mm machine cut kota stone slab as inriser of steps, skirting, dado and pillar, cills and jambslaid overcement mortar backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing with beewax polish and including over 10mm thick screed bed or bedding layer inCM1:3 complete all as specified and as directed by EIC |
| 74 | M&L Marble work other than white or black/Baroda green 18 to 20 mm thick (table rubbed and polished) in cooking platforms, jambs.flooringand like over and including provision of 15 mm thick cement mortar (1:4) including pointing in colour cement(1 :2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. . |
| 75 | M&L for 15-18mm thick granite stone slab (of any type) machine cut (in one piece) supported with 16mm thick marble stone base, bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigment to match the shade of stone in cooking platformsWHB counter top, vertical supports including grinding and polishing complete all as specified and directed. |
| 76 | S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thickof approved design or equivalent as approved by Accepting Officer and fixing with and including \"F/U\" channel not less than1.5mm thick complete all as specified and directed. |
| 77 | Supply only sheet glass 5.00 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed. |
| 78 | All as per item No 77 but one side frosted. |
| 79 | Supply only aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperaturecomplete all as specified and directed. |
| 80 | S&F Tubular towel rail / curtain rod 20mm dia Aluminium anodised & fixed in repairs complete all as specified and directed. |
| 81 | S&F in repairs Aluminium brackets for tubular towel rail 20mm dia complete all as specified and directed. |
| 82 | M&L tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated in repairs complete all as specified and directed. |
| 83 | Taking up or down steel tubing 15mm bore of pipe and connectionsincluding cleaning for refixing etc as required complete all as specified and directed.. |
| 84 | All as per item No 83 but 20mm bore of pipe complete all as specified and directed.. |
| 85 | M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia. |
| 86 | All as per item No 85 but 20mm bore dia complete all as specified and directed. |
| 87 | M&L Brass chromium plated shower rose 125mm size including fixing to steel pipe or union in repairs complete all as specified and directed. |
| 88 | M&L Hat and coat hooks, solid body of aluminium, 175mm to 250mm long and fixed in repairs complete all as specified and directed. |
| 89 | M&L Wash basin, Vitreous China white (Flat back) 630 x 450mm including brackets,, pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar type etc (Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed. |
| 90 | Supply only pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed. Make-Jaguar cat No-SQT-CHR-507KN or equivalent. |
| 91 | S&F in repairs pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed. Make-Jaguar cat No-SQT-CHR-507KN or equivalent. |
| 92 | M&L stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.Make-Jaguar cat No-SQT-CHR-514EKN or equivalent. |
| 93 | All as per item No 92 but angle cock Chromium plated 15mm bore dia complete all as specified and directed.Make- Jaguar cat No-SQT-CHR-526NKN or equivalent. |
| 94 | S&F in repairs health faucet (Hand wash for EWC) first quality including CP bracket to hold the faucet with CP pipe of suitable length in wall all as per manufacture instructions and as directed. Make-Jaguar cat No-ALE-CHR-583 or equivalent. |
| 95 | M&L Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long in repairs complete all as specified and directed. |
| 96 | M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes completein repairs complete all as specified and directed.Make-Jaguar cat No-SQT-CHR-511KN or equivalent. |
| 97 | S&F sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wasters , including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 mm x 160 mm and fixed in repairs complete all as specified and directed. |
| 98 | S&F in repairs Stainless steel floor trap,plain with grating removeable & refixable type including jointing with solvent cement 75mm dia of outlet complete all as specified and directed. |
| 99 | S&F in repairs Stainless steel floor trap,plain with grating removeable & refixable type including jointing with solvent cement100 mm dia of outlet complete all as specified and directed. |
| 100 | S&F in repairs of Low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 32mm dia complete all as specified and directed. |
| 101 | S&F in repairs of Low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm40 mm dia complete all as specified and directed. |
| 102 | M&L chipping, removing carefully concrete surface by low impact hamer/bracker without damaging the structure incl preparation of old surfaces of reinforcement bars as per manufacturer\"s instruction and disposal of debris out side MOD land and applying anticorrosive protective coating for steel reinforcement surfaces andallpying epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchemas approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete& new mortar, by brush application and building up the profile of structural members by using polymer modified mortar(Molith-PMM) ORPolymer mortar HB of Dr Fixit, upto 20mm thickness including levelling, profiling etc complete all as specified and directed. Make : Dr. Fixit OR equivalent of M/s. Krishna Conchemas approved by GE |
| 103 | Supply, fabricate and fixing with SINTEX Plasto board, one side decorative lamination and other side balancing white,100% termite proof,water proof,fire retardant, 18mm thick heavy density,interior gradecutting , fabricating and suitable fixing for kitchen cabinetsand shelves ofany size pulling drawersopenable leafcomplete including fixing only accessories such as Italian stainless steel hinges, handles, Stainless steel baskets, stainless steel rollers, magnets as required etc complete all as specified and directed as under :-(a)Stainlesssteel Handle fancy type 100mm size.(b) Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation.(c)Stainless steel perforated cutlery basket of suitable for cabinet,drawers and shelves opening / closing operation.(d)Stainless steel steel Cup and Saucer basket suitable size of cabinet,drawers and shelves opening / closing operation.(e)Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation.(f) Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation(g) Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation(h)stainless steel roller of size25mm x 12mm,505mm lenth suitable for baskets(j) Magnet of suitable size fixed for cabin leafs, drawers(k) stainless steel vent perforated 1mm thick of size 150mm x 100mmNote- The rate includes syntex plasto board and all connecting items mentioned above and The design and pattern should be approved by GE |
| 104 | Cleaning of PVC water tanks at any height (on accessible / inaccessible roofs) by removing all scale, dirt, mud any foreign material and removing and removing accummulated silt, other dirty substance, algae, fungus and other bacterial material from sides / bottom of tank cleaning shall be done by draining / pumping out water / sludges from bottom from wall / floor / roof by high pressure clleaning method with jet set and again cleaning the tank with fresh water.Disinfecting by using UV radiator and approved chemical (Chloriten) after cleaning writing following letter figures on black back ground with white enamel paint of capacity exc300 ltrs but not exceeding 500 ltrs:- (i) Date of cleaning(ii) Next date of cleaning.(iii) Remove of the existing lettering / figures completely. |
| 105 | All as per item No 104 buttank of capacity exc 501 ltrs but not exceeding 1000.00 ltrs |
| 106 | All as per item No 104 buttank of capacity exc1001 ltrs but not exceeding 1500.00 ltrs |
| 107 | All as per item No 104 buttank of capacity exc1501 ltrs but not exceeding 2000.00 ltrs |
| 108 | All as per item No 104 buttank of capacity exc3001 ltrs but not exceeding 5000.00 ltrs |
| 109 | S&F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 20 mm in repairs complete all as specified and directed. |
| 110 | S&F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 25 mm in repairs complete all as specified and directed. |
| 111 | M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete.20mm dia complete all as specified and directed. |
| 112 | M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete 25mm dia complete all as specified and directed. |
| 113 | S&F stainless steel plate rack fixed on wall etc complete,made out of 1.00 mm thick of over all size 0.75x0.75M with shelves and racks complete as approved by GE. |
| 114 | Dismantling/Demolition of existing roof terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified. Note: Demolition should be done by chiselling. |
| 115 | M&L brushing neat cement slurry @ 3 Kgs of cement per Sqm. Complete all as specified and directed. |
| 116 | M&L for rendering 15 mm thick in CM 1:3 on fair faces of brick work or concrete surfaceson roof finished even and smoothusing liquid water proofing compound as per manufacturers instructionsComplete all as specified and directed. Note :- Supply only liquid water proofing compound shall be measured & paid separately. |
| 117 | M&L for PCC 1 : 2 :4 type B0 (using 12.5mm graded stone aggregate) as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc mixed with approved water proofing compound all as per manufacturer\"ss instructions on the roof surface to achieve requisite slope all as specified and directed.Note : Supply only water proiofing compound shall be measured & paid separately. |
| 118 | Supply only polymer based liquid water proofing compound complete all as specified and directed. |
| 119 | M&L for providing 4 mm thick APP modified memberane over (Accessible) RCC roof with the following specifications :-(a)Cleaning existing surface properly.(b)Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density of 0.87 -0.89 Kg/Lit at 25 Degree Centigrade on the prepared dry roof surface. (c)providing and Laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :- (i) Membrane weight >3.6 Kg/Sqm.(ii)Net wooven polyster weight >160 gm/Sqm(iii) Softening point of membrane > 150ºC(iv)Joint Tensile strength Longitudiual > 650 Sq Cm at 230o C & Transverse > 450/ Sq cm (v)Tear strength - Longitudual > 300 N & Transverse > 250 N Direction(vi)Elongation > 30 %(vii)Impermeability under water pressure > 3 Kg/Sq cm Note:-APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane. |
| 120 | Supply and fixing silicon water proofsnake guard/ door gap filler 3.8 cm minimum gap fillingconnected with door shutter from the bottom using small spikes and adhesive as per necessary site requirement as directed by Engr In charge. |
| 121 | Deduct Credit for Demolished/ Dismantled material Rs. (-) 60,595.00 (Minus) as listed in Schedule of Credit.Note 1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the \"Contract Sum\".Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple bldgs having 03 and above storey height. Necessary scaffolding and saftey measures required during execution of work are including in this items. |
