Tender For Civil Works For Nifps System For 40/50 Mva Transformer At 220 Kv Gss Nokha, Bikaner-Rajasthan

tender for Civil Works For Nifps System For 40/50 Mva Transformer At 220 Kv Gss Nokha-1 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. (A) All kinds of soils.( B -1.8 ) 2 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).B- 3.1.6 3 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix (B-4.1) 4 Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand)B -5.1.2 5 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish 12 mm thick (B/12.3.3) @ 6 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. ( B-4.9) 7 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)(B-4.13.3) 8 Carriage of Earth, Sand ,line morrum, manure or sludge 1K.Mtr lead @ 80-23 less for intial lead (G/4.1)

Refer document

INR 1.40 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB