}

Tender For Repair & Renovation Of Staff Hut At Rajouri., rajouri-Jammu And Kashmir

Tender Notice

52537764
Tender For Repair & Renovation Of Staff Hut At Rajouri.
Tender
Indian
Jammu And Kashmir
Rajouri
01-12-2025

Tender Details

Tender For Repair & Renovation Of Staff Hut At Rajouri.; 1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :A. Of area of 3 sqm. and below 2 Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm. and under including cutting the patch in proper shape raking out joints and preparing the plastering the surface of the wall’s complete including disposal of rubbish to the dumping ground within 50 mtr. Lead. With cement mortar (1:4) 1 cement : 4 fine sand 3 Renewing glass panes, with putty and nails wherever necessary including raking out old putty :A. Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) 4 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 5 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. 6 Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) 7 Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work 8 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 9 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 10 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 11 Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 liter capacity -White 12 Providing and fixing C.P fitting of approved brandShort Nose bib cock 13 Long Nose bib cock 14 Angle Valve 15 Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 16 Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 17 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood 35mm 18 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 19 Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 20 Providing and fixing brass curtain rods of wall thickness 1.25 mmwith twobrass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 21 Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . 22 Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, inceiling with necessary nails etc. complete (frame work to be paid separately) : 23 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 24 PROVIDING AND FIXING OF LIGHTING POINTS /FAN POINTS IN 1.5 MM PVC INSULATED COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING OF APPROVED MAKE INCLUDING PROVIDING AND FIXING OF 6-AMP SWITCH RECESSED /SURFACE POINT TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989) 25 PROVIDING AND FIXING OF HEATING POINTS IN 4 MM PVC INSULATED COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING WITH 2.5 MM PVC INSULATED COPPER WIRE OF SAME MAKE INCLUDING PROVIDING AND FIXING OF 6/16 -AMP SWITCH RECESSED /SURFACE POINT TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989) 26 PROVIDING AND FIXING OF WIRING FOR 3-5 PIN 6-AMP SOCKET POINTS IN 2.5 MM PVC COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING OF SAME MAKE INCLUDING PROVIDING AND FIXING OF 5-PIN 6-AMP SWITCH/SOCKET TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989) 27 PROVIDING AND FIXING OF 8-12 WATT LED SURFACE LIGHT FITTINGS (ROUND/SQUARE SHAPE) COMPLETE IN ALL RESPECTS 28 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 29 Carriage of material by M.T incl loading/unloading & stacking complete 30 C. Sand av. Lead 120 km 31 D. Stone agg. Below 40 mm nominal size av. Lead 20 km

Key Value

Document Fees
INR 600 /-
Tender Value
INR 8 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail