Tender For Construction Of Naibat Office At Kuntwara; 1 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : 2 Hand Packed Stone at an Horizontal Level including Cost of Stones 3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 4 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 5 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 7 Brick work with common burnt clay (Non Modular) bricks of class designation 75 in super structure up to all floors. Including curing of Bricks In cement mortar 1cement: 6 coarse sand mortar. 8 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners hall be paid for separately): Second class kail wood 9 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 10 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement all work up to all levels.1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) Crushed in suspanded floors, in lintel bands, roof bands etc (Above plinth level) in beams suspended floors etc upto floor 5 level 11 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level .Thermo-Mechanically Treated bars of grade Fe-500D or more. 12 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. 13 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded 14 Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 15 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 16 Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size ) 17 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) 18 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick 19 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. 20 Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm 21 Providing and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface Second class Teak Wood 12 mm thick 22 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class Kail wood 23 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked 24 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 25 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work 26 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 100 mm 27 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm 28 Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm 29 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. 30 Providing and laying of PVC conduit pipes 25 mm dia of approved quality in slab and walls including all bends / complete job 31 Providing and laying of fan junction of approved quality in slab and walls including all bends complete job 32 Providing and laying of lamp junction of approved quality in slab and walls including all bends complete job 33 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding 34 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 35 Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone 36 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 25mm OD(SDR-7.4) 37 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe PN-16 pipe , 40mm OD(SDR-7.4) 38 PN-10 pipe , 50mm OD(SDR-11) 39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc. 25mm nominal outer dia pipes. 40 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc 40mm nominal outer dia pipes. 41 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc ) PPR Adapter 40mm Complete Job 42 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc ) PPR Adapter 25mm Complete Job 43 Providing and fixing PPR Unions PPR Union 25mm 44 Providing and fixing PPR Union 40mm 45 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. 46 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. 25mm nominal bore, 152mm long, weighing not less than 440gms. 47 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 48 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32 mm dia 49 P/F in position PVC floor traps 75 mm Complete Job 50 P/F PVC S&S pipe (75mm dia ) Complete Job 51 P/F PVC stay and clamps for PVC pipes Complete Job 52 P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes 75mm Complete Job 53 P/F plain bends 75 mm Complete Job Complete Job 54 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia 55 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 56 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. 57 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 58 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 59 Providing and fixing 100 mm sand cast iron grating for gully trap 60 Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 30 cm length. 61 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm 62 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mmCP Brass single hole basin mixer 63 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 64 Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete 65 Providing and fixing on wall 35 LTRS Electric Geyser with ABS Body. Complete Job 66 Cost of 1.5 sq mm single core copper wire (Red & black) polycape, havels or equivalent make (Including all leads, lifts and carriages etc. Complete Job 67 Adhesive tape (Including all leads, lifts and carriages etc.)Complete Job 68 1 way switch 16 Amp (Including all leads, lifts and carriages etc.)Complete Job 69 3 pin power socket 16 Amp,shuttered (Including all leads, lifts and carriages etc.)Complete Job 70 Cost steel wire grip (Including all leads, lifts and carriages etc.)Complete Job 71 Cost of 1.0sqmm wire for invertor points. (Including all leads, lifts and carriages etc.)Complete Job 72 Cost of 1200mm ceilling fan reputed make (Including all leads, lifts and carriages etc.)Complete Job 73 Cost of fan regulator (Including all leads, lifts and carriages etc.)Complete Job 74 Cost of 6amp 1 way switch reputed make (Including all leads, lifts and carriages etc.)Complete Job 75 Cost of 6amp 3way socket. (Including all leads, lifts and carriages etc.)Complete Job 76 Cost of 2.5sqmm wire. (Including all leads, lifts and carriages etc.)Complete Job 77 Cost of tube light 36watt led. (Including all leads, lifts and carriages Complete Jobetc.)Complete Job 78 Cost of 6amp mcb single pole. (Including all leads, lifts and carriages etc.)Complete Job 79 Cost of 16sqmm cable alluminium 2 core service line. (Including all leads, lifts and carriages etc.).)Complete Job 80 Cost of pvc cassing N capping batten (Including all leads, lifts and carriages etc.)Complete Job 81 Cost of junction box modular different size (Including all leads, lifts and carriages etc.)Complete Job 82 Cost of distribution panel box. (Including all leads, lifts and carriages etc.) Complete Job 83 Supply of 63amp MCCB (Including all leads, lifts and carriages etc.)Complete Job 84 Cost of earth wire1.5sqmm.. (Including all leads, lifts and carriages etc.) Complete Job 85 Cost of Exuast Fan 12 inch dia with lovers. (Including all leads, lifts and carriages etc.)Complete Job 86 Sand at an average lead of 35 km by MT 87 Bajree at an average lead of 30 km by MT 88 Bricks at an average lead of 210 km by MT 89 Stone at an average lead of 5 km by MT Please Enable Macros to View BoQ information
