|
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m |
| 2 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed. L.S. (Details in bill) Payment will made as per measurement |
| 3 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof: a) With 0.60 mm thick sheet L.S. (Details in bill) Payment will made as per measurement |
| 4 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping)(A) 300 mm lapping each way (a) With 0.60 mm sheet |
| 5 | Taking out door shutter and rehanging the same by fixing aluminium sheet [0.457 mm] with proper nail etc. L.S. (Details in bill) Payment will made as per measurement |
| 6 | Z-batten shutters of door and window as per design tongued and groove-half lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor. (B) Shutter with 19mm thick planks, 19mm thick battens. (iv) Other Local Wood |
| 7 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.L.S. (Details in bill) Payment will made as per measurement |
| 8 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar(b) 15 mm thick plaster (Outside wall)L.S. (Details in bill) Payment will made as per measurement |
| 9 | 10 mm thick plaster (Insisde Wall) L.S. |
| 10 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.L.S. (Details in bill) Payment will made as per measurement |
| 11 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in groundfloor. (ii) Grill weighing above 16 Kg./sq.mtr and above window grill, Grill gate for kitchen etc. if neededL.S. (Details in bill) Payment will made as per measurement |
| 12 | a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sandpapering etc. L.S. (Details in bill) Payment will made as per measurement |
| 13 | (A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary : (iv) Two coats (with any shade except white) |
| 14 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected toone another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates re considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or partthereof. L.S. (Details in bill) Payment will made as per measurement |
| 15 | Colour washing with \"ELLA\" with a coat of white wash priming including cleaning and smoothening surface thoroughly :(ii) External surface (ground floor) (b) Two coats L.S. (Details in bill) Payment will made as per measurement |
| 16 | Construction of Sub Base using Local Materials, spreading in uniform layers with Motor grader on prepared surface, including screening the metal as necessary, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, lighting, guarding and barricading including cost and carriage of all materials and making necessary earthen bundh of one metre wide on each side to protect the edges complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (Details in bill) Payment will made as per measurement |
| 17 | Kitchen slab L.S. (Details in bill) Payment will made as per Voucher |
| 18 | Add:- GST @ 18% |
| 19 | Add:- Labour Welfare Cess @ 1% Please Enable Macros to View BoQ information |
