|
| 1 | M&L anti-skid non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 and dismantling complete all as specified and directed. |
| 2 | M&L glazed ceramic coloured tiles 300 x 200 / 450 x300, 6 to 7 mm thick on vertical surfaces such as dados, wall etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces and including 10 mm thick backing coat in CM 1:4 and dismantling complete all as specified and directed. |
| 3 | M&L colouredvirified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 and dismantling complete all as specified and directed. |
| 4 | M&L vitrified ceramic coloured tiles 9 to 10 mm thick area of each tile not exc 0.36 sqm in skirting / dado and including 10 mm thick backing coat in CM 1:4 and dismantling complete all as specified and directed. |
| 5 | M&L 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) roughfinished as in sub basewithout using extra cement complete all as specified and directed. |
| 6 | M&L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments and including 15 mm thick screed bed in CM 1:6 and dismantling complete all as specified and directed. |
| 7 | M&L preparation thoroughly without any traces of dirt or laitance as in sunken floors and including applying two coats of NITOBOND SBR polymer modified coating to a thickness of 1 mm, 1st Coat (Nitobond SBR Chemical 1 ltr, Water 2 Ltrs, Cement 3 Kg) Second Coat (Nitobond SBR Chemical 1 ltr, Cement 3 Kg) complete all as specified and directed. |
| 8 | M&L 20 mm thick granite table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 and including pointing in white cement 1:2 using marble dust with admixure of pigment to match with marble shade of Makrana white and including dismantling complete all as specified and directed |
| 9 | S&F 0.63 mm thick plain black, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) and including dismantling complete all as specified and directed |
| 10 | M&L brickwork with fly ash modular bricks straight or curved on plan exc. 6 m mean radius built in CM 1:6 and including demolition complete all as specified and directed |
| 11 | M&L 10 mm thick rendering in CM 1:4 on fair faces of brick work, finished even and smooth without using extra cement and including taking down complete all as specified and directed |
| 12 | M&L 15 mm thick rendering in two coats 10 mm thick in cementplaster 1:6 and5 mm thick in CM 1:4 mixed withWPC aspermanufacturerinstruction finished evenandsmoothwithout using extra cementand including taking down complete all as specified and directed.NOTE: WPC will be measured and paid separately. |
| 13 | M&L 5 mm thick rendering on ceiling in CM 1:3 finished even and smooth without using extra cement and including taking down complete all as specified and directed |
| 14 | M&L preparition of new plastered wall surfaces and including applying two coats of OBD over a coat of alkali resistant primer laid over and including 3 mm thick wall care putty complete all as specified and directed. |
| 15 | M&L preparation of new plastered ceiling surfaces and including applying three coats of white wash complete all as specified and directed. |
| 16 | M&L preparation of new plastered wall surfaces and including finishing with two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 17 | M&L complete removal of existing treatment on wallsurfaces and including applying two coats of OBD over a coat of alkali resistant primer laid over and including 3 mm thick wall care putty complete all as specified and directed. |
| 18 | M&L complete removal of existingtreatment on ceilingsurfaces and including applying three coats of white wash complete all as specified and directed. |
| 19 | M&L complete removal of existing treatment of walls and cornices and including finishing with acrylic smooth exterior paint of required shade(Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 20 | M&L 75 mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in plinth protection / pathsfinishing cement concrete surface even and smooth without using extra cement and including demolition complete all as specified and directed. |
| 21 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed. |
| 22 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and directed. |
| 23 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S Square tube, in opening as per manufacturers instructions complete all as specified and directed. |
| 24 | S&F factory made solid panel laminated PVC door shutter 30 mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail: panelling of plain colour PVC sheet to be fitted in the M.S frame welded / scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specifications & drawing complete all as specified and directed. |
| 25 | S&F 100 mm long butt hinges extruded aluminium alloy withgalvanisedmild steel hinge pin anodised andfixed complete all as specified and directed. |
| 26 | S/F 150 mm size aluminium anodised handles, fabricated type complete all as specified and directed. |
| 27 | S/F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 28 | S&F 150 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 29 | S&F pressed steel frame of size 125 x 60 mm for doors with one or more rebates and including necessary fixing lugs hinges lock strike plate etc, complete all as specified and directed. |
| 30 | M&L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in filling in frame complete all as specifed and directed. |
| 31 | M&L 35 mm thick flush shutter, solid core construction with block board core and plywood face panels, commercials type on both sides complete all as specified and directed. |
| 32 | S&F 35 mm thick 2nd class hard wood glazed and skeleton shuttersopen rebated and prepared to receive gauze etc (without sash bars) edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc , sizes of memebres of shutters as specified in SSR Part-I section 8 clause 8.20 (a) (wire mesh doors) supply and fitted to chowkats complete all as specified and directed. |
| 33 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 34 | M&L preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 35 | M&L preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 36 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples wooden beads / aluminium beads completeall as specified and directed. |
| 37 | M&L2nd class hard wood plain fillets sectional area exc 13 sqcm but n. exc 25 sqcm square (as in chowkats of CBs), rectangular in section, wrought and smooth finish,secured with nails or brads and including polishing complete all as specified and directed. |
| 38 | M&L2nd class hard wood filletssectional area n. exc 3 sqcmsquare, rectangular or triangular in section, wrought and smooth finish but bullnosed, splayed chamfered or rounded on one edge or face complete all as specified and directed. |
| 39 | M&L 18-19 mm thick prelaminated medium density fibre board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work for cupboards, shutters and book shelves and kitchen cabinets, drawers, beading etc, and including dismantling complete all as specified and directed. |
| 40 | S&F 30 mm width of flaps continuous (piano) hinges, mild steel bright finish or elecrogalvanised complete all as specified and directed. |
| 41 | S&F 150 mm long stainless steel (fancy type) door handles for CBs of selected quality complete all as specified and directed. |
| 42 | S&F 100 mm aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 43 | S&F 100 mm size hasp and staple, aluminium anodised, wire type and including bolt to hinge plate and fixed with screws complete all as specified anddirected. |
| 44 | S&F 300 mmlong MS helical door spring with roller and roller plate complete all as specified and directed. |
| 45 | S&F 4 levers brass mortice locks, drawer, grade I, size 50 mm complete all as specified and directed. |
| 46 | S&Fcupboardmagnet in cupboard shelf etc,complete all as specified and directed. |
| 47 | S&F 20 mm dia CPcurtain rail / drapery rod of approved pattern along with decorative SS brackets with knob and pattern fixed with screws all as specified and as directed. |
| 48 | S&F factory made UPCV white colour casement openable window made of extruded prfiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow secction with multi chamber, frame (60x58mm), sash (60mm x 73mm ), T profile ( one vertical lenth in between two shutters) (60 mm x 74mm), glazing bead (35mm x 20mm) will be mitered cut and fuson welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket, 1.2 +/- 0.2 mm thick, galvanized steel frame (28 mm x 21 mm), sash (31 mm x 27.5 mm), T profile (27 mm x 17 mm) to be inserted in required profile, frame willbe fixed to the wall with 8 mm x 100 mm long fasteners. Hardware : casement handle made of zinc alloyed (white powder coated), But hinges of zinc allowyed (white powder coated), transmission gear made of mild steel with multi point locking system ) and 5 mm thick glazing with selected quality glass for the following sizes complete all as specified and directed:- |
| 49 | Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose :- |
| 50 | Area n.exc. 1.00 sqm each. |
| 51 | Area exc. 1 sqm but n.exc 2.00 sqm each |
| 52 | M&L treatment for sunken portion of WCs / bath and toilet with the following specifications complete all as specified and directed :- |
| 53 | Demolition of WC and including lime concrete and cement concrete coba etc, and cleaning with wire brush to remove all loose dirt, oil grease etc including removing debris outside the MD land. |
| 54 | Brushing with neat cement slurry @ 3 Kg / Sqm on cleaned RCC slab surfaces and including 10 mm thick rendering in CM 1:3 mixed with water proofing compound of Dr Fixit and finishing surfaces even and smooth without using extra cement. |
| 55 | Applying two coats of water proofing elastomeric liquid membrane of Dr Fixit or by brush application of STP (The surface after painting one coat shall be allowed to dry for 8 hours before application of next coat) all as per manufacturer\"s instructions. |
| 56 | 10 mm thick rendering in CM 1:3 mixed with water proofing compound of Dr Fixit all as per Manufacturer\"s instructions. |
| 57 | All CI joints shall filled with mixture of cement fine sand and shalicrete R of STP Ltd or integral water proofing chemical of Dr Fixit all as per Manufacturer\"s instructions. |
| 58 | Making holes in wall and fixing 600 mm long 40 mm dia medium grade GI spout for draining the surplus water if any. |
| 59 | Carry out ponding test for 48 hours to ensure water tightness of rapaired sunken portion. |
| 60 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) and including \"P\" or \"S\" trap with necessary fixing arrengement, plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device complete all as specified and directed.Make: Cat No 20011 of Hindware / Cat No 4017 of Prayag |
| 61 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook and including making connections and fixed in position complete all as specified and directed. Make: Cat No F100110 of Hindware / Cat No BEA-40 of Prayag |
| 62 | S&Fin repairs, vitreous china wash basin white flat back size 550 x 400 mm with brackets andincluding cutting for and pinning in ends of brackets or erecting stand, waste coupling CP brass 32 mm dia with long screwed shanks & fly nuts & fancy type CP pillar tap 15 mm bore complete all as specified and directed.Make: Cat No 10076 of Hindware / Cat No 4724 of Prayag |
| 63 | S&F in repairs, PVC low level flushing cistern 10 litres capacity complete all as specified and directed.Make: Cat No Sleek essence single flush of Hindware/ Cat No 501 of Prayag |
| 64 | S&F in repair brass chromium plated shower rose 125 mm size withshower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT of approved colour (minimum weight 40 gms) complete all as specified and directed. |
| 65 | S&F in repairs 600 x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick commercial ply wood backing and including aluminiumframe and fixed in wall with wooden plug with chromium plated brass screws and cup washers with glass self assembly complete all as specified and directed. |
| 66 | S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 67 | S&Fin repairssoap dish, vitreous china white, approximate size 160 x 160 x 90 mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. Make: Cat No F880011GRT of Hindware / Cat No BA-15S of Prayag |
| 68 | S&F in repairs CP brass tubular towel rail 600 mm long 20 mm dia \"D\" type complete all as specified and directed. Make: Cat No F580012 of Hindware / Cat No BA-10S of Prayag |
| 69 | S&F in repairs 32 mm bore low density polythelyne pipes (LDPE) of pressure rating 6 kgf / cm2 fixed complete to wall or in floors etc, as in outlet pipe for WHB etc, complete all as specified and directed. |
| 70 | S&F in repairs 15 mm bore bib taps fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed. Make: Cat No F440003 of Hindware / Cat No 7706 of Prayag |
| 71 | Taking up or down steel tubing & connections,15 / 20 mm bore complete all as apecified and directed. |
| 72 | S&F GI tubing (ISI) marked) medium grade with all fitting and fixed in concealed complete to wall, ceiling or laid in floors and including cutting chases in walls, floors, etc.and their making good for the following sizes complete all as specified and directed :- |
| 73 | 15 mm bore |
| 74 | 20 mm bore |
| 75 | All as per Sl. item No. 62 above but refixing only:-NOTE: Serviceable quantity shall be reused under this item. |
| 76 | 15 mm bore |
| 77 | 20 mm bore |
| 78 | S&F in repairsCP 15 mm bore stop valves / angle cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified and directed. Make: Cat No F360006 of Hindware / Cat No 8510 of Prayag |
| 79 | All as per Sl. Item No. 64 above but fancy type chromium plated with long shank and cup (concealed type). Make: Cat No F330043 of Hindware / Cat No PIS-10H of Prayag |
| 80 | S&F 15 mm dia 600 mmlong PVC water connection with PTMT nuts and washers complete all as specified and directed. |
| 81 | S&F 1000 ltrs capacity rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and including 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (min weight 210 gms) and including dismantling complete all as specified and directed. |
| 82 | S&F in repairs gun metal globe or gate valves of 20 mm bore with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 83 | S&F in repairs 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and laid in trenches and under floor etc, complete all as specified and directed. |
| 84 | All as per Sl. Item No. 69 above but 75 mm bore. |
| 85 | S&F 110 mm PVC (SWR) bends of any radius complete all as specified and directed. |
| 86 | All as per Sl. Item No. 73 above but 75 mm bore. |
| 87 | S&F PVC (SWR) floor trap, plain with grating including jointing with solventto waste pipe fixed in cement concrete type B-1 (1:2:4), 75 mm dia outlet complete all as specified and directed. |
| 88 | S&F PVC (SWR) gully trap 125 / 110 mm setting and jointing with solvent cement complete all as specified and directed. |
| 89 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 90 | S&F in repairs 40 mm bore low density polythelyne pipes (LDPE) of pressure rating 6 kgf / cm2 fixed complete to wall or in floors etc, as in outlet pipe for WHB etc, complete all as specified and directed. |
| 91 | S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats (Minimum weight 300 gms) complete all as specified and directed. |
| 92 | M&L 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate as in padding concrete (levelling course) on roof and including demolition complete all as specified and directed |
| 93 | M&L APP based polymeric membrane minimum weight 3 Kg per Sqm, minimum 3 mm thick reinforced with polyster non wove febric (Wt not less than 150 gm per Sqm and including primed surfaces and over application of tack coat of industrial bitumen 85/25 @ 1.2 Kg / Sqm,preparation of surfaces, applying two coats of aluminium paint laid over and including 10 mm thick rendering in CM (1:3) using water proofing compoundas per manufacturer instructions as in roof padding complete all as specified and directed.Note : Water proofing compound will be measuredand paid separately. |
| 94 | Supply only integral waterproofing compound, ISI marked complete all as specified and directed. |
| 95 | M&L 75 mm thick PCC 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base and includingand demolition complete all as specified and directed.. |
| 96 | M&L spreading and levelling sand cushioning 50 mm thick complete all as specified and directed. |
| 97 | M&L 60 mm thick M 35 grade machine pressed precast concrete interlocking paver block rubber mould using grey cement andpigment of any shape and size conforming to IS 15658 - 2006 complete all as specified and directed. |
| 98 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for foundation etc, or for shaft, wells, laying cables etc, not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 99 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 100 | Removing excavated soil to a distance not exceeding 50 m and depositingwhere directed at a level not exceeding 1.5 mabove the starting point complete all as specified and directed. |
| 101 | M&L PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150 mm bore pipe complete all as specified and directed. |
| 102 | M&L 150 mm bore salt glazed stoneware drain pipes (ISI marked) laid in trenches and jointed in CM (1:1) and including demolition complete all as specified and directed.. |
| 103 | M&L point wiring for one light / fan point controlled by one switch complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSHunsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceilling, continous earth wire 1.5 Sqmm PVCinsulated FR-LSH unsheathed 1100 Volts multistanderd copper conductor connected to common earth and dolly, necessary modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting for modular switches / sockets / fan regulators etc, for one light point controlled by one switch one way and including taking down existing complete all as specified and directed. |
| 104 | Note: Cost of cutting chases in walls and making good for concealed wiringand cost of modular boxes with cover plates is deemed to be included in quoted rate. |
| 105 | All as per Sl. Item No. 89 above but one ceiling fan / exhaust fan point controlled by one, one way switch |
| 106 | All as per Sl. Item No. 89 above but one bell point controlled by one bell push. |
| 107 | All as per Sl. Item No. 89 above but one light point controlled by two nos, 2-way, 6 Amps switch. |
| 108 | All as per Sl. Item No. 89 above but one 3 point 6 Amps switch socket outlet point controlled by one switch on the same board. |
| 109 | All as per Sl. Item No. 89 above but one 3 pin 6 Amps switch socket outlet point controlled by one switch on independent board. |
| 110 | All as per Sl. item No. 89 above but with cable 4 sqmm multi stranded copper FR-LSH wire, 1100 Volts grade, unsheathed for one 3 pin socket out let 16 amps on independent board including, continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade. |
| 111 | S &F modular switch 1 way 6A, 1 module all as specified and directed. |
| 112 | S &F modular switch 1 way 16A, 1 module all as specified and directed. |
| 113 | S&F modular switch 2 way 6A, 1 module complete all as specified and directed. |
| 114 | S&F modular bell push 6A, 1 module complete all as specified and directed. |
| 115 | S&F modular socket, 6A - 2/3 pin combined 2 module, flush tpe complete all as specified and directed. |
| 116 | S&F modular socket, 6A/16A - 2/3 pin combined 2 module, flush tpe complete all as specified and directed. |
| 117 | S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed. |
| 118 | S&F modular metal flush box 6 module and including white cover plate with frame complete all as specified and directed. |
| 119 | All as per item No.103 above but 4 moudle |
| 120 | All as per item No.103 above but 3 moudle |
| 121 | All as per item No.103 above but 2 moudle |
| 122 | S&F lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed. |
| 123 | S&F LED lamp 9W complete all as specified and directed. |
| 124 | Supply & replacement of 20 W ( minimum 120 lumem / watt) surface / wall mounted LED batten having PC diffuser, luminous efficacy of minimum 100 lumen/w, CRI>80, PF>0.9, CCT 6500K, independent isolated SMPS pased constant current electronic LED driver with THD<20%, surge voltage protection and other safety tests as per IS15885 (Part-2/Sec-13): 2012, with rated life 50,000 burning hours, system efficiency/ lumens 120 lumen per watt and housing made up of aluminium, white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input freqency 50-60 Hz, including electrical connection with3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 125 | Note: Contractor shall submitTDS ( Technical Data Sheet) alongwith sample approvalMake: Havells-ENDURALINE APRROBSO20W LED 865SPCSSIND/ Philips BN 170CLED 20S- 6500PSUL120/ WIPRO LL24-311-XXX-65-HE |
| 126 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with potted electronic driver and including aluminium housing connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make: Havells-LUMILINEPLUSNE OBS 10W LED 865 SPCSSINDS / Philips - BN021LED1256500PSUGR / Wipro -LL20-111-XX-65ALI |
| 127 | S&F LED light fitting 1x10W surface mounted bulkhead luminaires including LED light, potted driver, with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make : Havells Cat part No HEXAFT10WLED857SSYMBOPC / Bajaj Cat No. 830321 / Philips - BY300PLED31757PSUPCINS2. |
| 128 | S&F electric bell AC 230 v single pole complete all as specified and directed. |
| 129 | S&F modular fan regulator electronic step type, 100W2 module ISI marked complete as specified. |
| 130 | S&F BLDC ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep minimum air delivery 210 CFM with service value 6.00 BEE and 5 star rated complete all as specified and as directed. Note : - Old Fan shall be deposit in MES store yard.Make: Havells Cat No. FHCSS1SWHT48 / STANDARD Cat No. FSCZL5SWHT48 / Bajaj Cat No. 251100. |
| 131 | S&F SPN enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed. Make : ABB Cat No.1SYP111520C0001/ Legrand Cat No.5078 11/ Havells Cat No. DHDPBDP016 |
| 132 | M&L submain wiring using 2 runs 10 Sqmm of FR-LSH grade PVC insulated, unsheathed, stranded, copper conductor cable conforming to IS 694 : 2010 and one run of 10 Sqmm FR-LSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including suitable PVC Conduit (medium grade) in concealed wiring of suitable size, making good of disturbed surface of wall / ceiling / floor and taking down complete all as specified and directed. Note :2 runs of 10 Sqmm copper wire, 1 run of 10 Sqmm copper wire & one run PVC Conduit shall be measured as one unit |
| 133 | All as per Sl. item No. 116 of above but 6 sqmm cable.Note :2 runs of 6 Sqmm copper wire, 1 run of 6 Sqmm copper wire & one run PVC Conduit shall be measured as one unit |
| 134 | S&F sheet metal enclosure double door type for DB’s 240 Volts SPN 8 way with 200 Amps rated bus bar and including taking down complete all as specified and directed.Make: ABB Cat No. 1SYN869003R0001/ Legrand Cat No. 5076 11/ Havells Cat No. DHDNSHODAW08. |
| 135 | S&F sheet metal enclosure double door type for vertical TPN DB for 125 Amp MCCB as incomer, 8 way with 200 Amps rated bus bar and including taking down complete all as specified and directed.Make: ABB Cat No.1SYN8690VMXT108/ Legrand Cat No. 5077 52/ Havells Cat No. DHDLVDRWAOFO08. |
| 136 | S&F MCCB 415 Volt 16 / 18 KA 4 pole 125 Amp thermal magnetic trip release & setting ICU= 100% ICS as incoming with fixing arrangement complete all as specified and directed. Make: ABB Cat No. ISDA066708R1 / Legrand Cat No. 6697 19./C&S Cat No. CS3A4* |
| 137 | S&F MCB SPN 40 Amps, 240 volt, 10 KA,complete all as specified and directed. Make: Havells Cat No. DHMZCSPF006-040 / ABB Cat No. 1SYS272012R0404/ Legrand Cat No. 4086 18. |
| 138 | S&F MCB SPN 32 Amps, 240 volt, 10 KA,complete all as specified and directed. Make: Havells Cat No. DHMZCSPF006-032 / ABB Cat No. 1SYS271112R0324 /Legrand Cat No. 4086 17. |
| 139 | S&F MCB SP 6 to 32 Amps, 240 volts, 10 KA complete all as specified and directed.Make: Havells Cat No. DHMZCSPF006-032 / ABB Cat No. 1SYS271012R0324 / Legrand Cat No. 4085 95. |
| 140 | S&F air ventilation fan plastic (PVC) body type 250 mm,s ingle phase, 250 V AC and including making necessary hole by breaking existing wall to fix air ventilation fan, with frame fixing holdfastner, bolt, washer etc, connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector complete all as specified and directed.NOTE: Old fan shall be deposited to MES store yard. MAKE: Havells Cat No. FHVVEDXWH10 / STANDARD Cat No. FSVRFDXOWH10 / Bajaj Cat No. 70049. |
| 141 | Supply & replacement of 35 w security light having efficiency long life LED moudule with SMD LED package mounted on MCPCB with high LEDefficiency of rated life of 50,000 burning hours of >110 lumen/watt. Integral SMPS pased constant current electronic LED DRIVER WITH thd <20%, surge voltage protection and other safety tests as per IS 15885 (PART-2/SEC-13): 2012, ip 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink of effective thermal management, sturdiness, excellent corrosin resistance, separate optical and controll gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD Conductor cable of appropriate size and including 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including necessary GI clamps, nuts, bolts & washer with two coats of synthetic enemel paint over a coat of red oxide primer complete all as specified and directed. |
| 142 | Note: Contractor shall submit TDS ( Technical Data Sheet) alongwith sample approvalMake: Havells ENUDRASUNDOWNSL35WLED 765 PASYBOPC / Philips BRPO42PLED30CWMRSIPSAUGRSPDP4371/ Wipro LR06-501-XXX-57-XX |
| 143 | Supply, laying, jointing and testing, fixing to wall using clamps / pole / floor or in air or passing through pipes/ ducts / road/ path/ drain, laid in trenches 1100 volts grade heavy duty electric cable XLPE insulated, screened, PVC bedded, galvanishedsteel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 3.5 core 50 sqmm conforming to IS-7098 part -I and its latest amendments and including taking down complete all as specified and directed. |
| 144 | M&L sand cushioning to under ground cable with dry sand complete all as specified and directed.Note. Punned thickness of sand to be considered for measurement purpose. |
| 145 | Supply and lay PCC cable covers for LT cable protection, class LV, type 1 of size 250 x 150 x 40 mm complete all as specified and directed. |
| 146 | S&F 50 mm bore GI pipe light grade as in cable protection complete all as specified and directed. |
| 147 | M&L earthingcomplete with galvanized steel each plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less then 2.25 m deep below normal ground level) with top edge of plate not less then 1.5 m below noramal ground level, earth plate connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanizediron or steel all as shown in electrical plate no 3 of MES SSR-2009 (part I specifications) connected to eath test point all as specified or indicated including tesing on completion, including necessary exavation and earth work in any type of soil and adequate quantity of commen salt & charcoalfor alternate layer arround the earth plate, including PCC (1:2:4) pit and 10 mm thick C.Icover with arrangement of hinge to 40 x 40 x 6 mm C.I angle iron frame, including 20 mm dia C.Ipipe for watering purpose with the arrangement of funel and wirw mess, including G.I pipe of 15 mm dia for earth lead protection and including taking down complete all as specified and as directed. |
| 148 | Note : the rate is deemed to be inclusive of the cost of earth work exavation on any type soil and removal of surplus soil to a distance of 50 m, PCC 1:2:4 type B1 for earth pit cover 6 nos. 8 mm dia TMT bars on both direction, earth lead protection GI pipe medium grade with suitable size from earth plate electrode to main switch, GI wire length up to 7.50 m will measured as one unit |
