Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-12-2025 |
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed. |
| 2 | Excavating over areas, n exc 1.5 m deep and getting out in any type of soil soil complete all as specified and as directed. |
| 3 | Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil/strata for foundation, etc, or for shafts, wells, drain pipes and getting out soil complete all as specified and as directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick soil complete all as specified and as directed. |
| 5 | Removing surplus spoil to a distance exceeding 50m but n.exc 100m and deposited where directed at a level not exceeding 1.50 m above the starting point soil complete all as specified and as directed. |
| 6 | Treating of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors soil complete all as specified and as directed. |
| 7 | Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area soil complete all as specified and as directed. |
| 8 | Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimete wall soil complete all as specified and as directed. |
| 9 | Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed. |
| 10 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames)n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) soil complete all as specified and as directed. |
| 11 | All as per ser item No 10 but exc. 1.5 Sqm but n.exc 4 Sqm each, -soil complete all as specified and as directed. |
| 12 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings soil complete all as specified and as directed. |
| 13 | Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for all as directed. |
| 14 | Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets soil complete all as specified and as directed. |
| 15 | Demolition of brick/stone masonry built in CM.incl all quoins ,arches,pillars , but excluding ashlar facings, dressed stone work and precasr concrete articles soil complete all as specified and as directed. |
| 16 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) soil complete all as specified and as directed. |
| 17 | Plain Cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete soil complete all as specified and as directed. |
| 18 | M&L for PCC 1:2:4 type B1 (using 20 mm graded aggregate)in surface channel and drains soil complete all as specified and as directed. |
| 19 | M & L for RCC design mix M-25 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span soil complete all as specified and as directed. |
| 20 | M & L for RCC design mix M-25 (20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams;bases for columns, etc.; basement slabs, under-reamed piles and mass concrete soil complete all as specified and as directed. |
| 21 | M & L for RCC design mix M-25 as in Columns, pillars, piers, posts and struts soil complete all as specified and as directed. |
| 22 | M & L for RCC design mix M-25( 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like soil complete all as specified and as directed. |
| 23 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair soil complete all as specified and as directed. |
| 24 | M & L for Flooring sub base 75mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) soil complete all as specified and as directed. |
| 25 | Hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface soil complete all as specified and as directed. |
| 26 | M&L brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 soil complete all as specified and as directed. |
| 27 | M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:6 soil complete all as specified and as directed. |
| 28 | Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations soil complete all as specified and as directed. |
| 29 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat,rough finished surfaces of concrete soil complete all as specified and as directed. |
| 30 | Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions, flat, rough finished surfaces of concrete, square, rectanglar or polygonal soil complete all as specified and as directed. |
| 31 | Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc soil complete all as specified and as directed. |
| 32 | Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat, rough finished surfaces of concrete soil complete all as specified and as directed. |
| 33 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips soil complete all as specified and as directed. |
| 34 | All as per item No 33 above but 6mm to 8mm dia TMT bars soil complete all as specified and as directed. |
| 35 | All as per ser item No 33 above but 5mm dia and over upto and including 10mm diain stirrups, spacers and binders soil complete all as specified and as directed. |
| 36 | M & L for Sand filling under floors or in foundations including watering and consolidation soil complete all as specified and as directed. |
| 37 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing @ 200 ml / 50 Kg bag of cement as per manufacturer\"s instructions and finished the surfaces even and fair without using extra cement soil complete all as specified and as directed.Note:Liquid Water proofing will be measured and paid separately. |
| 38 | Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 39 | M&L 15mm thick rendering in cement mortar 1:4 on stone masonary surfaces finished even and smooth without using extra soil complete all as specified and as directed. |
| 40 | Supply only water proofing compound (liquid),ISI marked. |
| 41 | M & L for 5mm thick ceiling plaster in CM 1:3 on concrete surfaces including finishing even and smooth without using extra cement soil complete all as specified and as directed. |
| 42 | Preparation of new plastered wall/facia surfaces and applying two coats of apex ultima weather proof paint over a priming coat of exterior primer over a coat of 3mm thick wall care putty (colour of apex ultima approved by GE) complete all as specified and directed. |
| 43 | Preparation of new ceiling surfaces of concrete and applying three coats of white wash soil complete all as specified and as directed. |
| 44 | M & L for joint free coloured non skid ceramic tiles 400 x 400 x 10mm thick (square/rectangular) in floors etc over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in white or coloured cement to match soil complete all as specified and as directed. |
| 45 | M&L glazed ceramic coloured tiles 600 X 300 X 10 mm thick, digital pattern with dark, light and highlighter combination as in skirting / dados set and jointed in neat cement slurry and pinted in white or colouredcement to match over 10 mm back coat in CM 1:3 soil complete all as specified and as directed. |
| 46 | M & L for light shade vitrified ceramic tiles 1200 x 600 x 10 mm thick (square/rectangular) polished,areain floors etc over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in white or coloured cement to match soil complete all as specified and as directed. |
| 47 | All as per item No 12 above but as in skirtings etc over 10 mm thick back coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match soil complete all as specified and as directed. |
| 48 | M&L for Vitrified coloured heavy duty (Dura stone) tiles of size 300 x 300 x 10mm thick as in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 49 | M&L Granite slab 20 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges soil complete all as specified and as directed. |
| 50 | S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing soil complete all as specified and as directed. |
| 51 | S&F factory made solid panel PVC moulded door shutter, 28 to 30 mm thick(styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. |
| 52 | S&F 100mm long butt hinges, cast brass with mild steel hinge pin, bright polished, type B-11 soil complete all as specified and as directed. |
| 53 | Supply and fix in 100 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts soil complete all as specified and as directed. |
| 54 | S & F 100 mm extruded fancy brass handles, fabricated type polised soil complete all as specified and as directed. |
| 55 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mildsteel section made from roll forming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 56 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension, comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitredcut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but noextra payment on this account shall be made. |
| 57 | S&F 4 mm thick figured glass (frosted) ,pin head type and glazing with oil puttynot exc 0.50 Sqm in each panefixing to window/ventilator complete all as specified and as directed. |
| 58 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples soil complete all as specified and as directed. |
| 59 | S&FRotational molded (three layered as per IS 12701) white polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litres including fixing ball valves of size 20mm bore dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe soil complete all as specified and as directed. |
| 60 | Supply and fix Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterflyhandle conforming to IS screwed down, screwedfor iron pipes or for brass ferrule complete all as specified and as directed.Make : Jaquar cat No ARI-39037/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware |
| 61 | Supply and fixing angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge.Make : Jaquar cat No LYR-38053/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware |
| 62 | S&F fancy type single lever basin mixer Pillar tap, cast copper alloy, with capstan heads, chromiuk plated, screwed down high pressure with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm complete all as specified and directed Make : Jaquar Cat No ARI-39001B/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware |
| 63 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 64 | S&F CP Soap dish as specified and directed |
| 65 | S & F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 66 | S & F CP health faucet with 8mm dia 1.00m long flexible tube and wall hook with all accessories all as aproved Make : Jaquar cat No ALD-CHR-579/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware |
| 67 | S&F Waste coupling of PTMT for 32mm dia discharge pipe (half or full threaded) (Minimum weight 32mm 45gms/ 40mm-60 gms) soil complete all as specified and as directed. |
| 68 | S&F CP tubular towel rail , 600mm long between flanges aluminium anodised, fixed with rawl plugs complete all as specified and directed.Make : Jaquar cat No CAN-1111NM/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware |
| 69 | S & F CP towel rack 600 mm long with lower hangers all as specified and directedMake : Jaquar cat No ACN-1181N/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware |
| 70 | S &F corner glass shelf with brass chromium plate bracket guard and railing all as specified and directedMake : Prayag Cat No BEA-52/Jaquar/Cera/KOHLER / MARC /HR Johnson /Parryware |
| 71 | Supply and fix in repairs PVC cabinet mirror of selected quality mirror 4 mm thick, with premoulded plastic frame of trade pattern 25 mm wide with PVC sheet backing for moisture proof all as per Cat No.556 of Prayag or equivalent of other specified makes and fixed to wall with raw plugs and chromium plated brass screws and cup washers etc complete all as specified and directed. |
| 72 | M & L 15mm dia galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc soil complete all as specified and as directed. |
| 73 | M & L 20 mm dia galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified. |
| 74 | S&Fin repair PVC connection 15mm bore with ptmt nuts of length 450mm soil complete all as specified and as directed. |
| 75 | S&F 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thickcommercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers soil complete all as specified and as directed. |
| 76 | Supply and fix in repairs table top vitreous china wash hand basin white of size 650 x 420 x 110mmexcluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge.Cat Part No S2020121 of Cera or equivalent |
| 77 | S&F in repairs one unit EWC of Make : Jaquar Cat Part No ZPS-WHT-1028 complete all as specified and directed . |
| 78 | S&F 100mm Cast iron soil sand cast pipes,waste and ventin any length withor without ears, with cement joints,laid in trenches or in floors complete all as specified and as directed.(ISI Marks). |
| 79 | S&F 75mm Cast iron soil sand cast pipes,waste and ventin any length withor without ears, with cemeent joints,laid in trenches or in floors complete all as specified and as directed.(ISI Marks) |
| 80 | S&F100mm Cast iron soil sand cast pipes,waste and ventin any length withor without ears, with cement joints, fixed to walll complete all as specified and as directed. |
| 81 | S&F 75mm Cast iron soil sand cast pipes,waste and ventin any length withor without ears, with cement joints,fixed towall complete all as specified and as directed. |
| 82 | S&F 50mm Cast iron soil sand cast pipes,waste and ventin any length withor without ears, with cement joints,fixed towall complete all as specified and as directed. |
| 83 | S&F Salt glazed stone ware gully traps square or round mouthed, type P of size 150x150mm set and jointed to drain pipe with cement mortar (1:1) including demolition of old unserviceable gully traps soil complete all as specified and as directed. (ISI Marks). |
| 84 | S&F Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 75mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and as directed. |
| 85 | S&F Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 100mm bore fitted with oval access doorfixed with rubber rings joints as in repairs complete all as specified and as directed. |
| 86 | S&F 75mmCast iron floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and as directed.(ISI Mark) |
| 87 | S&F Cast iron branch pieces, single/double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 bore, fitted with oval access door as in repairs complete all as specified and as directed. |
| 88 | S&F Cast iron branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore, fitted with oval access door as in repairs complete all as specified and as directed. |
| 89 | S&F 50mm Cast iron cowls soil complete all as specified and as directed. |
| 90 | S&F Cast ironReducer 100mm for connecting and fixing gas pipe on wallsas in repairs complete all as specified and as directed. |
| 91 | S&F Cast ironReducer 75 mm for connecting and fixing gas pipe on wallsas in repairs complete all as specified and as directed. |
| 92 | Supply and fix in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge. Make Prayag/Parryware/Johnson/ Kohler/Marc |
| 93 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternatebays (n exc 2 Sqm each )and finished even and smooth without using extra cementsoil complete all as specified and as directed. |
| 94 | S & F MS framed work such as grills, gratings etc with ends of bars, shouldered riveted or gorged into spikes, framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165Frame work mild steel soil complete all as specified and as directed. |
| 95 | S&F welded steel wire fabric mesh weight n.exc 4 Kgs per sqm fixed to steel members complete all as specified and directed. |
| 96 | Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge. |
| 97 | Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paintingsoil complete all as specified and as directed. |
| 98 | Material and labour for3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces bygas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed by the Engineer-in-Charge.Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour. |
| 99 | Material and labour for Applying a coat of bituminous aluminium paint @0.10kg/Sqm as weather proof coat all as specified and as directed by the Engineer-in-Charge. |
| 100 | M&L for pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.60 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws soil complete all as specified and as directed. |
| 101 | Refixing of pre painted galvalume aluminium zinc coating GI based corrugated sheets any thickness of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws soil complete all as specified and as directed. |
| 102 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws soil complete all as specified and as directed. |
| 103 | S & F mild steel wind ties Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts soil complete all as specified and as directed. |
| 104 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesconforming to Fe 410 -W (Gde- E- 250) quality- A- soil complete all as specified and as directed. |
| 105 | Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick high Pressure Non Asbestos Fiber Cement decorative Board (E-Board Classic) in a grid of GI systtem duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid all as specified and directed. Make : Everest Industries Ltd or equivalent as per IS 14862 all as specified and directed. |
| 106 | Preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed by Engr-in-charge. |
| 107 | M&L for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessaryfixing lugs, hinges, lock strike plate ,12mm bar thresh hold etc.complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer soil complete all as specified and as directed. |
| 108 | All as per item No 108 above but frame size 125 x 60 mm soil complete all as specified and as directed. |
| 109 | Material and labourforplain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame all as specified and as directed. |
| 110 | M&L for factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, with both the faces covered with decorative face venner with lipping/ frame to match soilall as specified and as directed. |
| 111 | S&F factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc soil complete all as specified and as directed. |
| 112 | Supply and fix in300mm long fancy brass, sliding door bolt with sand cast or diecast brass hasp, staple (bolt type) and fixing bolts with rolled or drawn brass bolts soil complete all as specified and as directed. |
| 113 | S & F of 150 mm size (Overall length of cover plate) brass body and tongue with hard drawn steel spring soil complete all as specified and as directed. |
| 114 | S & F powder coated aluminium door strip with brush, width of flap 30mm soil complete all as specified and as directed. |
| 115 | Supply and fix 5.5 mm thick sheet glass,frosted or grounded on one side with rubber beading around the glass, in squares exc 0.50 sqm soil complete all as specified and as directed. |
| 116 | S&F decorative solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including removal of existing soil complete all as specified and as directed. |
| 117 | S&F in repairs stainless steel drapery rod of 25mm dia 304 grade along with stainless steel brackets and end caps of quality as approved by GE. |
| 118 | S & F in repairs 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work as in kitchen cabinets and cupboard shutters soil complete all as specified and as directed. |
| 119 | S & F 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions soil complete all as specified and as directed. |
| 120 | S&F 100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws soil complete all as specified and as directed. |
| 121 | S&F magnetic catches brass body and striking plate including letting in and fixed suitable for cupboard shutters soil complete all as specified and as directed. |
| 122 | Preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer soil complete all as specified and as directed. |
| 123 | Walling of random rubble,uncoursed,well bonded,bedded and solidly hearted built in cement mortar 1:6 soil complete all as specified and as directed. |
| 124 | M&L for extra for forming fair finished drain or channel n Exc 30cm inner girth in cement concrete ,using extra cement , incl forms moulds, mitered/stopped ends etc soil complete all as specified and as directed. |
| 125 | Add or deduct from item No 5 above for each 25 mm girth or part thereof over or under 30cm ditto (Drain Girth = 45 cm) soil complete all as specified and as directed. |
| 126 | M&L for concrete bed to drain pipes of bore 300mm including packing under,and completely surrounding pipes with concrete after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports soil complete all as specified and as directed. |
| 127 | M&L for RCCpipes 300mm dia, class NP2, laid and jointed with clamps soil complete all as specified and as directed. |
| 128 | M&L for providing 150 mm bore pipe concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested.in mix 1:3:6 Type C-2 using 40 mm graded stone aggregatescomplete all as specified and as directed. |
| 129 | M&L for providing precast cement concrete type B1 1:2:4 using 20mm graded crused stone aggregatein landings, cover slab, shelves and similar articles with plain faces and set in cement mortar 1:4 soil complete all as specified and as directed. |
| 130 | Cutting into existing manholes for connecting new drains, internal dia of pipe 150mm , making good to pipe and rendering, cuttin g out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required soil complete all as specified and as directed. |
| 131 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 132 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete includingfitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materialsfor taking credit and making good disturbed surfaces of walls floors and ceiling soil complete all as specified and as directed. |
| 133 | Point wiring for one light/ fan/bell/Exhaust point controlled by oneswitch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.4mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making samethe wall patchs after layingthe wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish. |
| 134 | Point wiring for for 3 Pin 16 Amps socket outlet independent board4.0 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.4mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 4.0 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making samethe wall patchs after layingthe wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.(2x4.0 sq. mm +1x4.0 sq. mm earth wire( for AC and Geyser) |
| 135 | Sheet metal enclosureSingle pole & neutral with 2 pin and earth plug and socket 20A240 complete with one single pole MCB of any cap from 10 to 20 A complete all as specified and directed. |
| 136 | All as per srl item No 133 but for 3 pin 6 Amps socket outlet independent boardincluding PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly. |
| 137 | All as per srl item No 133 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly. |
| 138 | All as per Srl item No 133 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly. |
| 139 | S&F for plug top 3 Pin 6 Amps230 V, 50 Hz, AC ,complete all as specified and directed by Engr In charge. |
| 140 | S&F for modular switch6 Amps single pole one way230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. |
| 141 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. |
| 142 | S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner covercomplete all as specified and directed by Engr In charge. |
| 143 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush typewith outer/inner covercomplete all as specified and directed by Engr In charge. |
| 144 | S & F calling Bell ding dong 230 volts single pole 50Hzcomplete all as specifiedand directed by Engr In charge. |
| 145 | S & F modularBell push flush type 6 amp 230 V, 50 Hz, AC , with outer/inner covercomplete all as specified and directed by Engr In charge. |
| 146 | M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. |
| 147 | S & F sheet metal enclosures for DBs when MCBs to be used double door DB VTPN MCCB 125A 4way IP43 Protection complete all as specified and directed. |
| 148 | S&F Sheet metal enclosure double door type for DBs 8 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 149 | S & F MCBsingle poleand neutral 240 volt any rating from 63 Amps \"C\"series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable soil complete all as specified and as directed. |
| 150 | S & F MCBsingle pole 240 volt any rating from 06 to 32 amps \"C\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable soil complete all as specified and as directed. |
| 151 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 1.5 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 1 Sq mm as earth lead (2x1.5 sq. mm + 1x1.0 sq. mm earth wire ) complete all as specified and as directed (for Inverter) |
| 152 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead (2x10.0 sq. mm + 1x10.00 sq. mm earth wire ) complete all as specified and as directed (for VTPN DB to SPN DB) |
| 153 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2.5 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable1.5 Sq mm as earth lead (2x2.5 sq. mm +1x1.5 sq. mm earth wire) complete all as specified and as directed (for Street Light) |
| 154 | Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC framewith 40mm thick RCC cover reinforced with 8mm dia deformed barshandle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5connected to main control board all as specified and testingon completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc. |
| 155 | S&F Modular electronic step type fan regulator 120 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. |
| 156 | Supply & fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep.Min air delivery 210 CFM with service value6.00 BEE. Five star rated with burshless direct current motor (BLDC) all as specified & directed by Engr-in-charge. |
| 157 | Supply & fix exhaust fan, steel body, AC single phase 230/240 volts heavy duty of size 300mm sweep with blades, frame, louvers and all fixing arrangements as all as specified & directed by Engr-in-charge. |
| 158 | Taking down ceiling fan/Exhaust fan of any size after disconnecting the wire from existing ceiling rose and depositeed to MES Store (AGE E/M sub Divn)complete all as specified and as directed. |
| 159 | S&F electric water heater, storage type with copper inner tank and heating element upto 2 KW capacity25 Ltr, BEE 3 star rated complete with all accessories such as safety valve, thermostate ,NRV, connection piece etccomplete all as specified and directed by Engr-in-Charge. |
| 160 | S&F forbatten angle lamp holder including lamp (9W) insulatedbodywith back plate suitable for batten fittings including complete all as specified and as directed. |
| 161 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize all as specified and as directed. |
| 162 | Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose soil complete all as specified and as directed. |
| 163 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size soil complete all as specified and as directed. |
| 164 | S&F Venza decorative wall mounting light fitting, SS finish fixture with opal glass diffuser including 12Wretrofit LED bulb and making all connection using flexible cable of suitable size from ceiling rose to fitting complete all as specified and as directed. |
| 165 | Supply and fixing LEDbuilding securitylight fitting with bracket 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitablebracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection soil complete all as specified and as directed. |
| 166 | Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH |
| 167 | Supply , Laying, Testing and commissioning cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size25 Sqmmx 4 coresize soil all as specified and as directed. |
| 168 | S&F Double Walled corrugatedDWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in undergroundall as specified and as directed. |
| 169 | Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and includingprovisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles soilall as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
