Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-12-2025 |
| 2 | 10-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-12-2025 |
| Sl. No. | Item Description |
| 1 | Taking down of old roof treatment of any description including mud phushka, concrete padding, tiles,cement plaster from roof surfaces etc including cleaning ,brushing and watering to joints and grooves and throwing the debris away from MoD land from the roof of height 3 to 9 mtr etc complete all as specified and directed. |
| 2 | Material and labour for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed. |
| 3 | Material and labour for applying 10 mm thick screed bedin CM 1:4 including water proofing compound@ 3% by weight of cement finished even and smooth on fair face of wall complete all as specified and directed. |
| 4 | M&L for preparation of new surface of roof incl cleaning the surfaceand applying smartcare damp proof ultra, a fibre reinforced elastomeric liquid water proofing membrane with resilient polymer having sun reflectivity index (SRI) of 105, hence reducing the slab temperature by 5-10 centigrate. FOrms a thick seamless, durable membrane thus offering ultimate waterproofing in three coats @ 9.5 Sqft/ lts. One coat of self priming of elastomeric waterproofing liquid (dilution with water in the ratio 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/ system not less than 500 microns). Insert smart care roof tape on all the joints of parapet walls and horizontal slab. Operational should be complete in all respect as per direction.Note : (a) The work under itemNo 4 shall be carried out by the authorized applicator of manufacturer by using modern techniques. THe contractor shall also furnish warranty of quality , finish work and effectiveness of water proofing treatment under this item for a period of not less than 10 years from the date of completion along with manufacturer warrenty of material for the same period. (b) From the taking down, preparation of the surface, Engr-in-Charge shall approve each and every stage before applying finishing coat. |
| 5 | Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting and including water proofing compound@ 3% by weight of cement complete all as specified and directed. |
| 6 | M&L for applying the non shrink high mechanical strength properties epoxy based mortar @ 5kg / RM on all corner joints of wall to prevent the capillary formation from wall to roof area; by three component system comprising of base, hardener and quartz filler havingER Base and Hardener with Quartz filler etc complete all as specified & directed.Note-: This item shall be carried by authorised company by manufacturer. |
| 7 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 8 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed |
| 9 | Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 10 | M&L for 15mm thick smart case ready mix plaster in specially designed ready to use cement base plaster with high quality ploymer additives and well graded sand and fillers which can be used for internal plastering over bricks, block , stone walls as well as concerte surface finished even and smooth without using extra cement and providing necessary scaffolding safety precautions and other requisit arrangement whereever requires complete all as specified and directed. |
| 11 | M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of acrylic distemper with roller application over a coat of primer over a coat of average 3mm thick wall care putty on new plastered surfaces complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatmentof oldplastered surfaces of wall and applying two coat of acrylic distemper with roller on old decorated wall surfaces over 3 mm thick white putty complete all as specified and directed. |
| 13 | M&L for 15mm thick smart case ready mix plaster in specially designed ready to use cement base plaster with high quality ploymer additives and well graded sand and fillers which can be used for externalplastering over fair face ofbricks, block , stone walls as well as concerte surface finished even and smooth without using extra cement and providing necessary scaffolding safety precautions and other requisit arrangement whereever requires complete all as specified and directed. |
| 14 | Supply only integral water proofing compound complete all as specified and directed. |
| 15 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surface incl preparing surface plastered or unplastered on wall complete all as specified and directed. |
| 16 | M & L for Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. on walland sanding of the putty surface with sand paper or other means by skilled labour and to make the surfaces smoothandfree from dust etc. as perall as specified and directed. |
| 17 | Material and labour for 10mm thick smart case ready mix plaster in specially designed ready to use cement base plaster with high quality ploymer additives and well graded sand and fillers which can be used for ceiling plastering over over concerte surface finished even and smooth without using extra cement and providing necessary scaffolding safety precautions and other requisit arrangement whereever requires complete all as specified and directed. |
| 18 | Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed. |
| 19 | M&L preparing old surfaces of ceiling and applying two coat of white wash on ceiling surface complete all as specified. |
| 20 | Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed. |
| 21 | M&L for glazed ceramic coloured tiles of size450x300x7mm thick (incl highlighter tiles) fixedover and including10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected. |
| 22 | M & L for Vitrified tiles 10 mm thick (square/rectangular) size 1200mm x 600mm double charge , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchin floor over and including 20 mm thick cement screed bed of CM (1:6) complete all as specified & directed. |
| 23 | All as per item No. 22 but with 10 mm thick rendering in CM 1:4 as in Skirting complete all as specified & directed. |
| 24 | Material & labourNon skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed. |
| 25 | M&L Granite 20 mm thick in steps, pillars, window cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rounding edges of stone slab one edge and including 20 mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and as directed. |
| 26 | Taking up or down 15mm bore steel/UPVC tubing and connection complete all as specified and directed. |
| 27 | Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed. |
| 28 | S&F for 15 mm bore medium grade galvanized steel water tubingwith all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified. |
| 29 | Taking up or down 20mm bore steel/UPVCtubing and connection complete all as specified and directed. |
| 30 | S&F for 20 mm bore medium grade galvanized steel water tubingwith all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified and directed. |
| 31 | S&F inrepairs 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 32 | S&F in repair single piece EWC with UF seat cover himges,fixingaccessories set ,cistern fittings, rim less tornado flushiong size 385x720x715 mm complete all as specified and directed. |
| 33 | S&F in repairs oval type wash basin superior quality 537x439 mm size incl fitted with granite top/baroda green stone over precast RCC slab including waste coupling and incl suitable size CPbottle trap connected upto floor trapcomplete all as specified and directed. |
| 34 | S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 35 | S&Fin repair 15 mm bore CP Angle valve fancy type with wall flane, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified & directed. |
| 36 | S&Fin repair 15 mm bore CP Angle valve cum bib tap fancy type with wall flane, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified & directed. |
| 37 | S&F in repair15 mm bore, single lever brass chromium plated wash basin mixer wothout popup waste with 450mm braided hoses opal prime fixed to wash hand basin complete all as specified and directed. |
| 38 | S&F in repair 15 mm bore, brass chromium plated single lever sinkmixer swinging spout type for making hot & cold water screwed down for pipe and fixed to wall incl connecting legs and wall flangesdimension12D x 10W x 5H cm and weight 450gm complete all as specified and directed. |
| 39 | S&F in repair 15 mm bore wall mixer brass chromium plated 3 in 1 with provn of both hand shower and over head shower with 115mm long bend pipe side connecting legs and wall flangeweight 600gm and size 20x20x20 cm fixedcomplete all as specified and directed. |
| 40 | S&F in repair brass chromium plated bottle traps 32mm borefor wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 41 | S&F in repairs 5mm thick glass beveled edge mirror fixing to wall with suitable assembly or bolts complete all as specified and directed. |
| 42 | S&F in repair PVC connection 15 mm size with PTMT nuts, 600 mm long complete all as specified and directed |
| 43 | S&F in repair CP tubular towel rail 20 mm dia D type 600 mm long between flanges complete all as specified and directed. |
| 44 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 45 | S & F in repairs toilet paper holder with flat recessed type stainless steel, chromium plated or stainless steel with necessary brass nuts & rubber washers, covered with chromium plated spring complete all as specified and directed. |
| 46 | S & F in repairs CP shower rose 125mm dia alongwith long bendshower armof length 450mm complete all as specified and directed. |
| 47 | S&F in repair CP soap dish brass chromium plated, size 100 x 60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. |
| 48 | S&Fin repair 150 mm square/circular CP grating with openable flap (Min weight 100 gms) complete all as specified and directed. |
| 49 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 50 | Supply and fixed in repair set of 10 mm thick glass corner shelf set of 3 nos (size 200mm,250mm & 300 mm) complete all as specified and directed. |
| 51 | S&F in repair 1000 ltrs capacity rotational moulded polyethylene white colour water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed. |
| 52 | S&F in repair 500 ltrs capacity rotational moulded polyethylene white colour water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tankcomplete all as specified & directed. |
| 53 | S&F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight- 210 gm) complete all as specified and directed. |
| 54 | S&F brass nipple 15 mm borefor RO water purifier complete all as specified and directed. |
| 55 | S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washersincl bedding in CM 1:4 to dwarf wall or including cast iron cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410mm x 330mm x 160 mm etccomplete all as specified and directed. |
| 56 | S&F in repair plate rack with racks and guard bars made outof stainless steel minimum 1mm thick, over all size 786mm X 914mm X 254mm and assembled with using brass nuts, bolts and washers complete all as specified and directed. |
| 57 | S & F in repairFactory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws and all required frame as per site requirement.Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet /Kitchen/Balcony Doors and Cabinets complete all as specified and directed. |
| 58 | S & F in repair Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed. |
| 59 | S&Fauto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed. |
| 60 | S&Fball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed. |
| 61 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished150mm long matt finished complete fixed in position complete all as specified and directed. |
| 62 | S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer\"s instructions complete all as specified and directed. |
| 63 | S&F Stainless Steel 304 grade wire Basket (avg. weight 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position complete all as specified and directed. |
| 64 | S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position complete all as specified and directed. |
| 65 | S&F in repairs Stainless steel drapery rods, 20mm internal diameter including decorative type Stainless steelbrackets including CP knobs fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed. |
| 66 | Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for issue under schedule of credit measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed . |
| 67 | S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to wallsincluding making good disturbe portion to match the existing complete all as specified and directed. |
| 68 | S&F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturbed portion to match the existing complete all as specified and directed. |
| 69 | S&F 75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to wallsincluding making good disturbe portion to match the existing complete all as specified and directed. |
| 70 | S&F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and jointed with cement joint including making good disturbe portion to match the existing complete all as specified and directed. |
| 71 | S & FCI floor trap, plain with grating including jointing with solvent cement (Diameter of outlet 75 mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, inlcuding taking out of old unserviceable connections etc, connecting up new and making good disturbed portion complete all as specified and directed. |
| 72 | S & FCI floor trap, plain with grating including jointing with solvent cement (Diameter of outlet 100 mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, inlcuding taking out of old unserviceable connections etc, connecting up new and making good disturbed portion complete all as specified and directed. |
| 73 | S & F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 74 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 75 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed. |
| 76 | M&L for Factory made WPC (Wood Polymer Composite)Double Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed. |
| 77 | M&L for Factory made WPC (Wood Polymer Composite)single Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed. |
| 78 | Supply & fix Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as specified and directed.Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as directed. |
| 79 | S&F Glazed or skeleton factory made door shutter, 35mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge ( without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified & directed. |
| 80 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified. |
| 81 | S&F aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 82 | M&L for providing, PCC 1:3:6 type C-1 (using 20mm graded aggregate) for embedding hold fasts including necessary form work etc.complete all as specified and directed. |
| 83 | S&F for 200mm long brass tower bolt complete all as specified and directed. |
| 84 | S&F for 300mm long brass handle, oval type, stove enamelled complete all as specified and directed. |
| 85 | S&F for 200mm long brass handle, oval type, stove enamelled complete all as specified and directed. |
| 86 | S&F for 100mm long bright finished brass mortice latch and lock 6 levers with and pair of lever handles of approved quality with necessary screws, complete all as specified and directed |
| 87 | S&F for 300mm long brass sliding door bolt complete all as specified and directed. |
| 88 | S&F for 150mm long brass floor door stoper complete all as specified and directed. |
| 89 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous finecellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant andshould have excellent screws holding strength to fix hinges and hold doors properly for a long life)complete all as specified & directed. |
| 90 | S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 91 | S&F for 100 mm long stainless steel Butt hinges medium weight complete all as specified and directed. |
| 92 | S&F for 100mm long aluminium handle, cast type complete all as specified and directed. |
| 93 | S&F for 150mm long aluminium tower bolt complete all as specified and directed. |
| 94 | S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; ; clamps; hold fasts; windties; hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters;and similar small articles conforming to Fe 290gde E 165 complete all as specified and directed. . |
| 95 | Supply and fixing factory made uPVG white colour Sliding window Three track size not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware, Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured or payment purpose.) |
| 96 | Providing and fixing factory made uPVC white colour casement (Openable) window Area exceeding 1.00 sqm but not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of\"zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 97 | Providing and fixing factory made uPVC white colour casement (Openable) window Area exceeding 1.00 sqm but not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of\"zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 98 | Providing and fixing factory made uPVC white colour fixed window Area not exceeding 1.00 sqm eachmade of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) |
| 99 | S&F 5.5 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed. |
| 100 | S&F 5 mm thick figured glass,pin head typefixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed. |
| 101 | S & F Stainless steel wire cloth, 0.36 mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 102 | S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 |
| 103 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 104 | M&L for Boring holes through granite cooking platform lining for pipes ,etc n\"exc 50mm dia and making goodcomplete all as specified and directed. |
| 105 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 106 | Dismantling of interlocking tiles of any thickness in floor/ paving in any depth etc complete all as specified and directed |
| 107 | M&L for PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection(75 mm thick) laying in alternate ways cutting grooves and filling bitumen mastic mixed with sand andfinished even and smooth without using extra cement all as specified. |
| 108 | M& L cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors complete all as specified and directed . |
| 109 | M&L for Chequered cement concrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cement slury in floors with grey pigment cement and pigments over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 110 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;in repair complete all as specified and directed. |
| 111 | M&L for Plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate)as in surface channel and drain complete all as specified and directed. |
| 112 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds mitred/stopped ends etc complete all as specified and directed. |
| 113 | Dismantlingwrought iron or mild steel work of any description not otherwise provided for steel gates etc complete all as specified and directed. |
| 114 | S&F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240complete all as specified and directed. |
| 115 | M& L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the internal/external wall and wooden Cup board,shelves,etc.wooden area should drill by 6 mm bit,Gap between two holes is 30 cm to 45 cm internal/external wall skirting level should drill by 8/10/12 mm bit,gap between two holes is 45 cm to 60 cm.filling the holes by 100 ml to 150 ml dilution of chemical emulsion in two stages 3 stage close the holes by white cement and finsihes with existing surfaces. The ATT chemical should be odorless and mixed formulation should be injected at the rate of 5 ltr per sqm.The ATT chemical should contains.(i) Byfinthrin 20 % EC(Smell Chemical)(ii)CHLORPYRIPHOS 20 % EC (Smell Chemical)(iii) Imidacloprid 30.5 % SC (Odor less Chemical)The work pertaining to ATT shall be executed from authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE.(a) 02 years guarantee of painting work will be admissible after date of completion and 10% amount will be reserve against ATT work after date of completion for the 02 years. |
| 116 | Dismantling of posts or struts (wood, steel or RCC) any section embedded in concrete/bricks work /masonry etc, including taking out embedded portion and making good disturbed ground and disposal of unserviceable material, debris and rubbish to a distance n exc 100m complete all as specified and directed. |
| 117 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed. |
| 118 | M&L for PCC1:4:8 type D2 cement concrete in foundations, filling and mass concretecomplete all as specified and directed |
| 119 | M&L Brick work with fly ash bricks (od size bricks) , straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 120 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4complete all as specified and as directed. |
| 121 | M&L for Preparation of newly plastered wall surfaces and applying three coats of white washing on wall all as specified and directed. |
| 122 | M&L for frame work of angle iron as in fencing posts including cutting tops to shape as directed drilling holes,notching for wire etc flat iron fillets(for securing wire mesh etc ) including all necessary welding,drilling holes etc complete all as specified and directed. |
| 123 | M&L PCC 1:3:6 type C-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 124 | M&L for providingPCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping,bands, plinth course and junction of brick edging and brick lining for drains as in benching other similar works including use and wast of necessary form work complete all as specified and directed. |
| 125 | Supply onlyChain link MS galvanisd fencing, any size or type complete all as specified and direced. Note :- BOO convey by accepting office to check the mesh size thick mess of wire and weight constant. |
| 126 | Dismantling fencing wire mesh, any type and in any position complete all as specified and directed. |
| 127 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 128 | Supply & fixing of 10mm dia mild steel round or square bars, in available lengths comfirming to Fe-410-W (Gde-E-250) complete all as specifed and directed. |
| 129 | S&FMild steel screw bolts (machine made) with haxagonal or squarehead and one end and screwed other end or screwed both ends, each screws shall be fixed with necessary washers exc 5cm but n exc 10cm long and 5 to 10 mm dia of neck complete all as specified and directed. |
| 130 | Taking down carefully existing unserviceable copper / aluminum point wiring of any description & in any position with and ncluding taking out existing unserviceable conduits or battens of any descriptionwith sunken boxes/junction boxesand all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc but excluding tube light fittings and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. |
| 131 | M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts.grade FRLSH PVC insulated unsheathed cable with proper colour codingdrawn in including PVC concealed conduit not less than 20 mm dia medium grade with all accessoriesandFRLSH PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth,including cutting and chasing of wall surface for laying PVC conduit and suitable size of modular sunken boxand making good to the disturbed surfaceof wall/floor and matching with existing specifications. Connections of cable with MCB\"s or bus bar shall be done through proper size copper/brass thimbles.Note : Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduitis not feasible at no extra cost for the following :-(a) One light /fan point/Exhaust fan point controlled by one switch. |
| 132 | (b) One 5 pin socket outlet 5 Amps on independent board |
| 133 | (c)One 5 pin socket outlet5 Amps on same board |
| 134 | (d) One bell/buzzer point controlled by one push button on the same board with other switchesor independent |
| 135 | (e)One telephone point wiring with cables 0.4 sq mm 2 core |
| 136 | (f)One TV socket point wiring with cables RG-6 Coaxial cable |
| 137 | All as per item No 131 here in before but with cable size 4 Sq mm FRLSH for one 5 pin 15/16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4 sqmm all as specified and directed. |
| 138 | S&F modular telephone jack RJ-11 white colour fixed in 1 M box comprising of flush metal box, inner plate and outer cover, all conforming to IS 3854:1997 with finger proof terminals with captive screws having front fixing & removing features without removing plates complete all as specified and directed. |
| 139 | Supply and fixing modular TV coaxial socket outlet fixed in 1 M box comprising of flush metal box, inner plate and outer cover complete all as specified and directed. |
| 140 | Supply and fixing modular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed. |
| 141 | Supply and fixing modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed. |
| 142 | Supply and fixing modular socket outlet2/3 pin 6 Amps combined 2 module, complete all as specified and directed. |
| 143 | Supply and fixing modular socketmultipurpose 3 pin 6/16 Amps combined 2 module, complete all as specified and directed. |
| 144 | Supply and fixing modular step typetwo module electronic fan regulator heavy duty 120watts 240 volts complete all as specified and directed. |
| 145 | Supply and fixing Modular Bell push 6A 1 module pole, one way, complete all as specified and directed. |
| 146 | Supply and fixing call bell, Ding dong type, 230 volts AC single pole complete all as directed. |
| 147 | Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified & directed. |
| 148 | Supply and fixing modular cover plate with metal frame (inner and outer) 1 module for mounting switch and sockets all as specified and as directed. |
| 149 | Supply and fixing modular cover plate with metal frame (inner and outer) 2 module for mounting switch and sockets all as specified and as directed. |
| 150 | Supply and fixing modular cover plate with metal frame (inner and outer) 3 module for mounting switch and sockets all as specified and as directed. |
| 151 | Supply and fixing modular cover plate with metal frame (inner and outer) 6 module for mounting switch and sockets all as specified and as directed. |
| 152 | Supply and fixing modular cover plate with metal frame (inner and outer) 8 module for mounting switch and sockets all as specified and as directed. |
| 153 | Supply and fixing blank spacer plate for single module complete all as specified and directed. |
| 154 | Supply and fixing 20W inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours incluuding connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 155 | Supplying and fixing 10 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 10W, luminaire lumens > 1000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surgeprotection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certificationand connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified. |
| 156 | S&Fdecorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base including connecting up with three core flexible copper conductor cableof suitablesize complete all as specified and directed. |
| 157 | S&F in repair post top lantern LED type 25 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver, lamp including grouting of GI pipe medium grade not less than 50mm and provide & fix suitable size of anti monkey cage in square shape made of 4mm GI wire of suitable size for protection of post top lantern from monkey complete all as specified and directed. |
| 158 | Supply and fixing LED building security light fitting 35 Watt 230 V AC out-door type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection,fixed to pole or wall of building with and including suitableBracket made out of25 mm dia GIlightgrade pipe, 1.00 m long bent to shape by cutting & weldingas required & directed and fixed withtwo Nos of FI clamps 35x6 mm to be tightened with suitable size of bolts, nut and washers and including painted withtwo coat of aluminium paint over a coat of red oxide primer, and including connecting the fittingto electric sourcewith & including twin twisted copper flexible wire of size 0.75 sqmm three core with suitable size flexible PVC conduitincluding all accessories and fixing arrangements for fixing the light fitting and writing the date of fixing on security light with permt marker complete all as specified and directed.Note:-The period of defects liability shall be 02 Years from the date of installation of security light. |
| 159 | S&F LED 10 watts bollard Mushroom shape warm white with robust IP 65 rating design, Height-0.80m and efficient light distribution including light fitting fixing and making PCC block foundation of size 250x250x250mm with concrete cement and connecting the fittings on PCC foundation block with suitable size of fastner complete all as specified and directed. Note:-The period of defects liability shall be 02 Years from the date of installation of Bollard light. |
| 160 | Disconnecting& taking up or down existing unserviceable sub main wiring of copper/aluminium conductor of any description, any size & in any position including taking out existing unserviceable conduits or battens of any description and making good the disturbed surfaces to the existing surfaces all as specified and directed. |
| 161 | M&L for Circuit/Sub main wiring with two single core FRLSH 1.5 sqmm copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in PVC conduit medium grade 20mm dia concealed in wall, floor (Min 250mm depth) or ceiling for sub main connection including FRLSH 1.5 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connection to earth dolly and making good disturbed surfaces of walls, floors, etc complete all as specified.Note:- Two single core FRLSH 1.5 sqmm copper conductor, one run PVC conduit and one run of FRLSH 1.5 sqmm earth wire shall be considered & measured as one unit. |
| 162 | M&L for sub main wiring using two 2x 6 sqmm single corePVC insulated, unsheathed stranded copper conductor cable of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) as required diawith standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductorof size 1x 6 sqmmas earth continuity conductor connected to earth dolly complete all as specified and directed.NOTE : Two run of single core PVC cable with one run ofearth conductor and conduit /batten shall be measured as one unit. |
| 163 | Disconnecting and taking down old unserviceabledistribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces to the existing surfaces complete all as specified and directed. |
| 164 | Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way double door complete with appropriate size bus bar and neutral link incl taking down all as specified and directed. |
| 165 | Supply and fixing sheet metal enclosure with socket plug top and MCB single pole and neutralwith two pin and earth plug top with one SP MCB 20 Amp 240 volt complete all as directed all as specified and as directed. |
| 166 | Supply and fixing MCB SP 1 to 32 Amp (\"C\" curve)having short circuit rating 10KA, 240 voltscomplete with connection testing and commissioning. Complete all as specified and directed. |
| 167 | Supply and fixing MCB SPN 40 to 63 Amp (\"C\" curve)having short circuit rating 10KA, 240 voltscomplete with connection testing and commissioning. Complete all as specified and directed. |
| 168 | M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and rivetedto earth plate by means of nuts, bolts, check nuts & washers, of galvanizediron or steelwith connected to test point and testing on completion including 15mm GI light grade pipe for earth leadprotection from earth point to earth plate, including provnadequate quantity of charcoal dust mixed with35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth platewith 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire meshwith and includingall necessary excavation& earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:-On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor. |
| 169 | Supply, fixing and connecting in repair for Electric circuits for size of 1.0 sqmm copper FRLS wire for inverter in existing conduit/casing caping complete all as specified & directed. |
| 170 | Dismantling, taking down exisitng ceiling fan/Exhaust fan and deposited to E/M store for re-fixing and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and directed. |
| 171 | Supply, fixing, connecting & testing Exhaust fan heavy duty, CI body single phase 230V, of size 300 mm sweep,1400 rpm with louvered shutters including necessary fixing arrangements on wall with & including bracket nut and boltsand including connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose and also writing MES No with black paintcomplete all as specified and directed. |
| 172 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 173 | Supply & Fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) operate with remote control and including connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose & Fan hook with hanging clamp suitable size of nut & bolts and also writing MES No with black paintcomplete all as specified and directed. |
| 174 | Supply and fix in replacement electric water heater, storage type steel body with S/S inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, 02 Nos connection pipes etc also writing MES No with black paintcomplete all as specified and directed. |
| 175 | S & F Wall mounting fan, electric driven single phase 230 volts, oscillating type, 400 mm sweep, high quality ABS base with high speed motor and balanced blades with three leafed and 3 core copper cable of suitable size complete all as per specified. |
| 176 | Supply, installation, testing and commissioning of commercial type wall mounted electric chimney made out of IS Certified Width : 60cm, Suction Power : 1400 m3/hr, Function Type : Heat auto clean, Filter type: Baffle filter (SS), Finish : BlackControl: touch with Gesture, Led : 1.5W LED, Warranty: 5 Years on product, 12 Years on motor, Product Dimension (WxDxH) (In mm) 600x430x425mm, equipped with odor sensor which will sense odor and adjust speed of chimney automatically remote control, autoclean alarm softlight complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
