Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-12-2025 |
| 2 | 10-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-12-2025 |
| Sl. No. | Item Description |
| 1 | Surface excavationnot exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for laying of drain pipes,manholes,etcandgetting out inhard/densesoil complete all as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 4 | Removing excavated materials in soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point all as specified and directed. |
| 5 | Excavation in post holes (or similar holes) each n. exc 0.5 cu.m, getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in hard / dense soil complete all as specified |
| 6 | M & L PCC (1:4:8)type D2(using 40mm graded stone aggregate)as in foundations filling and mass concrete complete all as specified and directed. |
| 7 | M&L Providing precast PCC (1:2:4)type B1 (using 20mm graded stone aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings.bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling).etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM (1:6) with joints to match complete all as specified and directed. |
| 8 | M&L Providing PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating,including necessary form work complete all as specified and as directed. |
| 9 | M&L Providing PCC (1:3:6) type C1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary for workcomplete all as specified and directed. |
| 10 | M&L Providing precast RCC (1:2:4)type B1 (using 20mmgraded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in CM (1:4) complete all as specified and as directed. |
| 11 | M&L Providing RCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in beams, cantilevers bressummers lintels over 1.5 m span,etc complete all as specified and directed. |
| 12 | M&L Providing RCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in slabs or bandssupported on walls, beams and columns in floors,roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed. |
| 13 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished rough surfaces complete all as specified and directed. |
| 14 | Use and waste of Form work to sides and soffits of floor or roof beams, beam haunching, lintel etc rough finished surfaces of concrete flat surfaces complete all as specified and directed. |
| 15 | Use and waste of Formwork to soffits ofroof slabs, floor slabs, landings and similar work not exceeding 200mm thick finished rough surfaces complete all as specified and directed. |
| 16 | Demolition of brickwork /block masonary, built in cement mortar including all plain concrete cement, coping, quoins, arches, pillars, etc includingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 17 | M&L Brick work with using flyashbricks old sizestraight or curved on plan exceeding 6 m mean radius built in CM (1:6) complete all as specified and directed. |
| 18 | M & L Half brick work with using old sizeflyash bricks , straight or curved on plan exc 6.0 m mean raduis and built in CM (1:4) as in partition wallscomplete all as specified and directed. |
| 19 | Dismantling of boarding of any description,fixed in any position with screws,etccomplete all as specified and directed. |
| 20 | M&LBoarding 15mm thick clean sawn, planed one side and edges tongued and grooved or rebated supplied & fixed with nails in any situation (except flooring and skirting) complete all as specified and directed. |
| 21 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed. |
| 22 | Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed. |
| 23 | S&F Pressed steel frames for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed |
| 24 | S & F Pressed steel frames for doors of size 105 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc with one coat of primer complete all as specified and as directed. |
| 25 | Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in CM (1:3) depth of embeded portion exc half brick & not exc one brick etc completed all as specified and directed by Engr-in-Charge. |
| 26 | M&L PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkatscomplete all as specified and as directed |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 28 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 29 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2020 as applicable complete all as specified and as directed |
| 30 | S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS squre tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc all as per specified and directed (Make SINTEX or epuivalentin RAJSHRI/NANDImake as approved by accepting officer) complete all as specified and as directed |
| 31 | S&F Steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated (Base steel as per IS 513 \"D\", galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm (outside for glazing and inside gauged shutter) Sections forframe should be of 72mmx55mm, section for mullian should be72mm x 50mm section for shutterframe should be 47mmx 20mm andsection for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm.Stainless steel wire mesh of 0.45mm dia and average width of aperture 1.4mm shall be used for fly proofing 4mm thick plain sheet glass to be used for glazing of glazed shutters.Make: Elexir |
| 32 | S & F 30 mm 2nd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc completed all as specified and directed. |
| 33 | S & F 40 mm thick factory made second class hardwood,Flush shutters (any number ofpanel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces. complete all as directed and specified. |
| 34 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc all as specified and directed. |
| 35 | S&F 100 mm size stainless steel butt hinges complete all as specified and directed. |
| 36 | S&F 100 mm sizebutt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed |
| 37 | S & F 150 mm long aluminium handles, cast type anodised extruded section and fixed complete all as specified and directed. |
| 38 | S & F 150 mm longaluminium anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 39 | S & F 300 mm long mild steel sliding boltplate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed |
| 40 | S&F 150 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixingclips of sheet, cast or extrudedsections and fixing bolts andsliding bolts of extrudedsections or cast-aluminiumalloy and fixed and fix complete all as specified. |
| 41 | M&L in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both sidedecorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick allaround edging, complete all as specified and directed. |
| 42 | S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws as in repairs |
| 43 | S&F False ceiling at allheights with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles of size 595 x 595 mm of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to .75 as per IS 8225:1987, Noncobustible as per BS 476part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000m, cross-T of size 15 x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanized @ 80 grams per sqm) i.e, 50mm long , 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x 24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, and as per directions of the Engineer-in-Charge. |
| 44 | M&L HDF (High dencity Fiber ) board, 18/19 mm thick exterior grade, pre-laminated both sidedecorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick allaround edging, complete all as specified and directed. |
| 45 | M&LHDF (High dencity Fiber ) board, 12 mm thick exterior grade, pre-laminated both sidedecorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick allaround edging, complete all as specified and directed. |
| 46 | S&FEuropean Stainless Steeel 304 Grade Cabinet Hinges Soft Close / Outer Crank Hinges fixing with suitable SS screws complete all as specified and directed. |
| 47 | S & F Concelled cub board handles fixed with screws complete all as specified and directed. |
| 48 | S & F Sliding Door Hook Lock for Wardrobe Cabinet Lock - 25 mm with Dimple Key with 2 Star Keysfixed with screws complete all as specified and directed. |
| 49 | S & FMagnetic Catcher/Drawer Magnet for Cabinet/ Cupboard/ Wardrobe fixed with screws complete all as specified and directed. |
| 50 | S & FSide Mount full Extension Drawer Slide of size 27 x 94 x 522 Millimeters for drawers fixed with screws complete all as specified and directed. |
| 51 | S & FSS curtain rod 25mm dia complete all as specified and directed. |
| 52 | S & F of SS curtain rodbrackets suitable for 25 mm dia fixed with screws complete all as directed |
| 53 | S & F in repairs anodized aluminium alloy powder coated curtain rod 20 mm dia of standard thickness with fixing including necessary brackets, stops, rollers etc complete all as directed. |
| 54 | S&F SlideLine slidingtrack 2 door system with Silent Systemcomprising ofProduct Details complete all asdirected.by Eng-in-charge :-a) Aluminum/SS Runner Profile upto 2400 mm Silver - 1 Nob)2 Door Kit for 1 Cabinet (16-24 mm thick door) - 1 set c)Silent System - 1 set2- track, bottom running sliding door system, Inset door position, At the side screw-on mounting ofCapacity :- Max. 60 kg* Door thicknesses: 18-24 mm Make Hettichi or equalent. |
| 55 | S&F SS double Shelf bat Support L-shaped Shelf Fixing Bracket with vaccum bush double screw including fixing with SS screws complete all as specified and directed. |
| 56 | S&F Exterior WPC 3d Wall Panel, 8.5 Inch X 9 ft 5 Inch25 mm thick fixed all specified by manufacturers including clauding structure complete all as specified and directed by Eng-in-charge. |
| 57 | S&F Aluminium composite pannel exterior powder coated 3 mm thick fixed on aluminium grid of 38mm x25mm rectangular section 1.50mm thick fixed all asper manufacturers instructions complete all asdirected by Eng-in-charge. |
| 58 | M&L TMTbars 10 mm dia and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips,complete all as specified and directed. |
| 59 | All as per Item No.58 above,but6mm to 8 mm dia |
| 60 | All as per Item No.58 above,but5mm dia and over upto and including 10mm dia as in stirrups , spacers and binders etc., |
| 61 | S&F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) Fe-410-W(Gde-E-250) quality B forming holes without any attachment complete all as specified and directed |
| 62 | S&F StructuralSteel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.complete all as specified and directed. |
| 63 | S&F MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting platesconforming to I. S.1161-1979 grade St.-240.complete all as specified and directed. |
| 64 | S&FWind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed. |
| 65 | S&FPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 66 | S&F Pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 67 | Demolition of RCC of any description and in any position not otherwise specifically provided reinforced (reinforcement of cut as required to facilasite demolition etc) and removal of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 68 | Demolition of Cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) includingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 69 | Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concreteetc includingremoval of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 70 | Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as specified and as directed |
| 71 | M&LPCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface withusing water proofing compound liquid @ 2% by weight of cement or as per manufacturer\"s instructionsincluding rounded or chamferred on edges and formwork etc all as specified and directed.Note: Supply only water proofing liquid shall be measured and paid separately |
| 72 | Supply only polymer based lilquid water proofing compound. |
| 73 | M&L Rendering 10mm thick CM (1:4) on roof surfaces duly mixing with water proofing compound at the rate of 2% by weight of cement and finished even and smooth complete all as specified and as directed Note: Water proofing compound will be measured and paid separately under relevant item in this schedule |
| 74 | Supply only water proofing compound |
| 75 | M & L Providing water proofing treatement with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyesternon oven fabric ( weight not less than 150gm/Sqm) applyied on one coat of oil based bitumen emulision primer @ 0.3 lit per sqm ( OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections.Laying of membrane by forced ( torch) application with 10cm overlaps .A coat of blown bitumen 85/25 grade @ 1.2 Kg/sqm to be applied on top of memberane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified. |
| 76 | M&L Providing 2mm thickAPP based polymeric membrane minimum weighing 3kg/sqm andreinforced with polyster non wove fabric (wt. not less than 100 gms/sqm) land on primed surfaceby forced application complete all as specified and directed. |
| 77 | S&FRoof tiles, Mangalore pattern, interlocking at side joints, laid dry.complete all as specified and directed. |
| 78 | Dismantling floor, hearth or wall tiling including cementmortar beddingremoving serviceable tiles and rubbish off the premises etc including removal of rubbish/ demolished materials out of MD landcomplete all as specified and directed. |
| 79 | M&L Non skid coloured ceramic tiles of size exceeding .0.06 sqm but not exceeding 0.11 sqm of 7 to 8 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15 mm thick CM (1:6)screed bedcomplete all as specified and as directed. |
| 80 | M&LNon-skidceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqmin floorsetc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc over and including 15 mm thick CM (1:6)screed bedcomplete all as specified and as directed. |
| 81 | M&L Glazed ceramic coloured wall tiles of approved colour of size 350x 250x 7/ 450x300x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick CM (1:4) backing coat complete all as specified and as directed |
| 82 | M&LNon-skidceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqmin skirting / dado etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc.over and including 10 mm thick CM (1:4) backing coat complete all as specified and as directed |
| 83 | M & L Leather finish Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, Light Shade area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 15 mm thick CM (1:6)screed bedcomplete all as specified and as directed. |
| 84 | M&L Vitrified ceramic tiles (glossy finish) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick CM (1:6)screed bedcomplete all as specified and as directed. |
| 85 | M&L for for Virified Ceramic tiles (glossy finish) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick CM (1:4) backing coat complete all as specified and as directed. |
| 86 | M&L 25 mm thick granite tiles (of any size) machine cut, jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone duly grinding and polishing laid over and including 15mm thick screed bed CM (1:4) as in steps, jambs, pillars, window cills, cooking platforms and like complete all as specified and as directed. |
| 87 | Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified. |
| 88 | M&L Rough dressed sand stone slab tiles in wall clauding ,bedded and jointed over and including 10 mm thick CM (1:3) backing coatand pointed in neat cement slurry to match complete all as specified and as directed. |
| 89 | M&L 20 to 40mm thicknatural stone wall cladding tiles are made from high-quality sandstone stones of approved colour and shape and size to match with existing walls using pigment to match with stone tiles over and including 10 mm thick CM (1:4) backing coat complete all as specified and as directed. |
| 90 | M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) asin plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and directed. |
| 91 | M & L 75 mm thick PCC (1:4:8)type D2 (using 40 mm graded stone aggregate) as in sub base to floor complete all as specified and directed. |
| 92 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;over and including 10 mm thick CM (1:4) backing coat complete all as specified and as directed. |
| 93 | M&L Providing 60 mm thickness, M-35 Grade, machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 ofwith grey cement and pigment complete all as specified and directed. |
| 94 | M&L 50 mm thick Sand bed filling under interlock tiling including watering and consolidation complete all as specified and directed |
| 95 | Taking down cement plaster from brick/stone wallof any description etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 96 | M&L Rendering 10 mm thick CM (1:6) on other than fair faces of brick surfaces, finished even and smooth without using extra cement.complete all as specified and as directed |
| 97 | M&L Rendering 15 mm thick in two coats, 10 mm thick in CM (1:6)and 5 mm thick in CM (1:4)mixed with integral water proofing compound as per manufacturers instructions, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately. |
| 98 | M & L Rendering 5 mm thick in CM (1:3) on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 sqm each patch complete all as specified and as directed |
| 99 | M & L Preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed. |
| 100 | M & L Preparing the old plastered or unplastereddecorated surfaces of walls and applying two coats of white wash complete all as specified and as directed. |
| 101 | M & L Complete removal of existing treatment on wall surfaces and applying two coats of Acrylic distemperover and includinga coat of alkali resistant primer over and including 3 mm thick wall care putty in two layerscomplete all as specified and as directed. |
| 102 | M & L Preparing newly plasterd wall surfaces of walls and applying two coats of Acrylic distemperover and includinga coat of primer using chalk whiting over and including 3 mm thick wall care putty in two layerscomplete all as specified and as directed. |
| 103 | M & L Preparing old plasterd wall surfaces of walls and applying two coats of cement base paint of any colourcomplete all as specified and as directed. |
| 104 | M&LComplete removal of existing treatment of external surfaces of wallincluding removing fungus /algae dirt, oil, grease and loose particles by wire brush, cleaning, washing and removing dust. Cracks less than 2 mm, should be cleaned free of dust with a vacuum cleaner, etc and applying 3.00 mm thick white cement based wall care putty for a smooth finish complete all as specified and as directed. Note:-Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works etc. Make:-Birla White / Asian Paint / Diamond wall putty /JK Putty |
| 105 | M&L Applying 2 coats ofweather proofpaint over a coat of exterior wall primer including preparation of surfaces and allow it to dry before taking up the two coats,etc complete all as specified and directed.Make: Apex Ultima from Asian Paints orequivalent in All Guard from Berger,Weather Shield Max Exterior Acrylic from ICI Dulux. (I) Unit time quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works.(II) The rate of application of primer and two coats shall be as per manufacturers instructions. (III) A time gap of eight hours shall be maintained between the application of primer and each coat .(IV) Application of primer and paint shall be done by an authorised applicator of the paint. (V) Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out painting shall be made by the contractor.(VI) The contractor shall deposit full quantity of weather proof paint to the user unit calculated based on coverage as per manufacturer\"s instructions before starting of paint work.The paint shall be issued to the contractor by user unit as per weekly requirement. |
| 106 | M&L Preparation of new wooden surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 107 | M&LPreparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 108 | M&LPreparation of new surfaces of steel, of any description, not otherwise described, not exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 109 | M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on one or more coats on old work.complete all as specified and directed. |
| 110 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed. |
| 111 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed. |
| 112 | S&F CPVC pipes, SDR 11, 16 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets , male and femaleThreaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceilingwith all clampsin Shafts/ducts with all necessary scaffolding to fix the pipes andtesting the joints under prescribed pressure etccompleteall as specified and as directed. |
| 113 | S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets , male and femaleThreaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceilingwith all clampsin Shafts/ducts with all necessary scaffolding to fix the pipes andtesting the joints under prescribed pressure etccompleteall as specified and as directed. |
| 114 | S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow,Tee, bends, unions ,sockets , male and femaleThreaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceilingwith all clampsin Shafts/ducts with all necessary scaffolding to fix the pipes andtesting the joints under prescribed pressure etccompleteall as specified and as directed. |
| 115 | Cutting and grooving of wall for fixing of CPVC pipe linesand after fixing of CPVCpipe line and making good of all cutting surfaces etc complete all as specified and directed. |
| 116 | S&F in CP brassbib tap Two way 15mm bore fancy type with crutch or butterfly handle, screwedfor iron pipe or for unions and fixed complete all as specified and directed. Code No.ARI-CHR-39041 of Jaguar |
| 117 | S&F CP brass 3 way diverter Single Lever 3-inlet Diverter Exposed parts kit Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve and Button Cap (Compatible with ALD-193N) Code:ARI-CHR-39193NK, Range : Aria ofJaguar or equalient, screwedfor iron pipe or for unions and fixed complete all as specified and directed. |
| 118 | S&F Concealed Body for 3-Inlet Single Lever Diverter with Button Assembly, But without Exposed Parts Code:, Range :ALD-193N Aria ofJaguar or equalient, screwedfor iron pipe or for unions and fixed complete all as specified and directed. |
| 119 | S&FJaquar - Spout No -Florentine -SPJ-5443- rome - SPJ-CHR-5443 on Decure.inspout for CP diverter , screwedfor iron pipe or for unions and fixed complete all as specified and directed. |
| 120 | S&F15 mm dia angle cockCP brass fancy type cast copper alloy chromium plated with capstan head serewed down foriron pipe fixed complete all as specified and directed. |
| 121 | S&FHealth faucetJaquar Brass Health Faucet, Silver, Chrome Finish (ALD-CHR-573) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Health faucet fixing in pipe etc. complete all as specified and directed. |
| 122 | S&F Shower roses 300mm x 300mm sizechromium platedwith or without swivel joint including chromium plated shower arm fixing to steel pipe or union etc.complete all as specified and directed. |
| 123 | S&F in repairs 125 mm size shower rose, chromium platedwith or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed. |
| 124 | S&F PVC connections, 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 125 | S&F PVC connections, 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 126 | S&F5.5mm thick bevelled edge mirror ofselected quality glass, mounted on 6mmthick AC building board or commercialplywood and fixed to wooden plugs withchromium plated brass screws and cup washers, complete all as specified and directed. |
| 127 | S & F repairs 600mmx 450mm bevelled edge miirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 128 | S&F Vitreous China EWC single piece white with integral flushing sistren, seat cover., including trap set in and including lime concrete complete all as specified and directed. |
| 129 | S&F Vitreous china wash basin, white, Table Top WASH Basin 495x395x150mm JAQUAR JDR Series or equalient fixed on Granite including, Click Clack type CP brass waste coupling 32 mm dia making necessary holes for waste pipe and for pillar cock and complete all as specified and as directed. |
| 130 | S&F 32 mm dia Brass chromium plated bottle trapsfor wash basins with inlet and outletscrewed for pipe or connectionsincludingnecessary packing, unionand cap and fixedand complete as directed. |
| 131 | S&FPillar Cock with Extended Body (11 Inch Long) CP brass of Jaquar Brass Aspire or equalient fixed to granite table top WHB and complete all as specified and directed. |
| 132 | S&F Vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittingswith long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed. |
| 133 | S&F Stainles steel sink with drainage board ,1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipeetc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. |
| 134 | S&F Stainless steel plate rack, wall mounted of size 750mm X 900mm X 200 mm of approved quality made of 1.00mm thick stainless steelfor kitchen with necessary fixing materialcomplete all as specified and directed. |
| 135 | S & F in repairs Towel rail 600mm long of brass chromium plated fixed with and including CP brass screws and wooden/plastic cleats. (Minimum weight 190 gms) complete all as specified and directed. |
| 136 | S&FTowel Rail rack 600mm long of Stainless steel fixed withand including Chromium plated brassscrews and wooden/plastic cleatscomplete all as specified and directed.Make JaquarCode No. AQN-GRF-7781 |
| 137 | S&F in repairs CPbib tap 15mm bore fancy type with crutch or butterfly handle, screwedfor iron pipe or for unions and fixed complete all as specified and directed. |
| 138 | S&F15 mm diastop valve / angle cockfancy type cast copper alloy chromium plated with capstan head serewed down foriron pipe as fixed in repairscomplete all as specified and directed. |
| 139 | All as per Item No.138 above, but fancy type, chromium plated with long shank and cup (concealed type) |
| 140 | S&F Toilet paper holder with flat recessed typestainless steel complete all as specified and directed. |
| 141 | S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excludingflushing cistern ) etc complete all as specified and directed. |
| 142 | S & F in repairs PVC 10 ltrs capacity symphonic action type low level flushing cistern including flush pipe, cantilever brackets incluiding taking down existing cistern etc complete fixed in repairs complete all as specified and directed. |
| 143 | S&Fin repairs PVC flexible waste pipes 32/38 mm bore 80 centimetre long complete all as specified and as directed |
| 144 | S&F in repair CP corner glass 12mm thick with brass bracket screws etc complete all as specified and directed. |
| 145 | Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bendsetc complete all as specified and directed |
| 146 | S & F 110 mm bore PVC (SWR)single socketed in any length with rubber ring joints as soil, waste and vent pipes laid in floors or trenches complete all as specified and directed |
| 147 | S & F 75 mm bore PVC (SWR)single socketed in any lengthwith rubber ring joints , complete fittings etc fixed to walls with using MS clamps8 mm dia with two nuts wall nails etccomplete all as specifed and directed. |
| 148 | S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing ofstainless steel grating in ground shape etc complete all as specified and as directed. |
| 149 | S&F 110 mm dia PVC (SWR) junction single (single T or Y) equal or unequalwith access doors complete all as specified and as directed. |
| 150 | S & F 110 mm bore PVC (SWR) plain bends, any radius complete all as specified and as directed. |
| 151 | S&F 75 mm dia vent cowl PVC (SWR) complete all as specified and as directed. |
| 152 | S&F 110 mm dia vent cowl PVC (SWR) complete all as specified and as directed. |
| 153 | Disconnecting existing tanks disconnecting existing tank, setting aside (or lowering if required) for repairs, cheaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repainring, etc. measured separately) ,exc 250 & not exc 500Ltrs tankscomplete all as specified. |
| 154 | S&F 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-Icomplete all as specified and as directed |
| 155 | S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and as directed |
| 156 | S & F in repairs20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 157 | M&L Reinforced concrete pipes class NP-2 ,150 mm dia laid and jointed coplete with collars and including demolition and breaking up existing SGSW/RCCpipes concrete bed including packing under and haunchingjointed in cement mortar and taking out of trenches if requiredetc,complete all as specifed and directed. |
| 158 | M&L Reinforced concrete pipes class NP-2 ,200 mm dia laid and jointed coplete with collars including demolition and breaking up Existing SGSW/RCCpipes concrete bed including packing under and haunchingjointed in cement mortar and taking out of trenches if requiredetc,complete all as specifed and directed. |
| 159 | Cutting into existing manholes or connecting new drain making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required, 150mm dia of pipe complete all as specified anddirected by Engineer-in-Chage. |
| 160 | All as per Item No 159. above but 200mm dia of pipe |
| 161 | Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified. |
| 162 | Taking down old unservicieble existing submain wiring of any size and type complete all as specified and as directed. |
| 163 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed. |
| 164 | M&L Providing concealed point wiring complete with multistranded copper conductor cable in concealed non- metallic PVC coduit 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLSH conforming to IS - 694 multistranded drawn including conduit with new sunk type pressed steel terminal boxes suitable for MODULARswitches including fixing/grounting sunken/ surface as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earthwire with one run of1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLSconforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly for one light/Bell point controlled by one, one way switch 5 amps, SP and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :-Note: 1. Metal flush sheet metal enclousers & modular cover plates shall be deemed inclusive in the qoted.2. Item for concelaed wiring i.e., chases, pining to making good to facing including cement work measured seperately. |
| 165 | All as per Item No.164 above, butone ceiling fan/exhaust fan point controlled by one,one way switch and regulator |
| 166 | All as per Item No.164 above, butone light point controlled by two,two way switches |
| 167 | All as per Item No.164 above, but one 3 Pin 5 Amps switch socket outlet point controlled by one switch on Independt board. |
| 168 | All as per Item No.164 above, butone 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 169 | All as per Item No.164 above, but using 2.5 Sq mm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for3 pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 170 | S & F Modular switch 1 way, 6 A, 1 Module capacity 230 volts complete all as specified and directed. |
| 171 | S & F Modular switch 1 way, 16 A, 1 Module capacity 230 volts complete all as specified and directed. |
| 172 | S & F Modular switch 2 way, 6 A, 1 Module capacity 230 volts complete all as specified and directed. |
| 173 | S&F Modularsocket outletmultipurpose 2/3 Pin, 6 amps, 230 volts combined 2 Module complete all as specified and directed. |
| 174 | S&F Modularsocket outletmultipurpose 5 Pin, 6 amps, 230 volts combined 2 Module complete all as specified and directed. |
| 175 | S&F Modularsocket outletmultipurpose 6 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and directed. |
| 176 | S & F Modular ceilingfan regulator for compactbility with BLDC ceiling fans,5 stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and as directed. |
| 177 | S&F Modular Bell Push ,6Amps, SP,230V,AC complete all as specified and as directed. |
| 178 | M & LSubmain wiring with two runs of single core 4 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one run of4 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing complete all as specified and as directed. Note. Two runs of 4 sqmm cable, one run of 4 sqmm cable as earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. |
| 179 | S & F 1x10 w/ 12 watt wall mounted LED batten with extruded aluminium heat sink provided for efficient heat dissipation & interated electronic driver, 230 volts bipin holders, DIFFUSED TYPE connetor block internally prewired etc with 2 Nos PVC round blocks for mounting arrangements including all accessories with new 3 coremulti stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 10W complete all as specified and directed. |
| 180 | S & F 1x20w/22watt wall mounted LED batten with extruded aluminium heat sink provided for efficient heat dissipation & interated electronic driver , 230 volts bipin holders, DIFFUSED TYPE connetor block internally prewired etc with 2 Nos PVC round blocks for mounting arrangements including all accessories with new 3 coremulti stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W complete all as specified and directed. |
| 181 | S & F LED light fitting 1x10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. |
| 182 | S&F LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 183 | S & F Ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed. |
| 184 | S&F Bell ding dong working on 230 volts AC Supply,complete all as specified and as direced. |
| 185 | S &F Sheet metal enclosure MCBDB SPN 8 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed. |
| 186 | S&F MCB, SP 6-32 Amps, 240 volts of rupturing capacity 10 KA, \"C\" series complete all as specified and as directed. |
| 187 | S&F MCB, SPN 32 to 40 Amps, 240 volts of rupturing capacity 10 KA, \"C\" series complete all as specified and as directed. |
| 188 | S & F VTPN DB 4 Way suitable for flush mounting with 250A copper bus bar for each face, with 2 neutral bar, 2 earthbar and cable ties for cable management, fully insulated busbar & shrouded neutral bars, Improved pan assembly for ease of installation, prefitted masking sheet,reversible door for IP 43 & IP 54 DB\"s with provision for DPX3 100/160 MCCB as incomer and SP MCB all as specified SP/TP MCB\"s as outgoinggfitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) G-FRAME MCCB INCOMER DB (Busbar Rating- 160 A) complete all as specified and directed. |
| 189 | S & F in repairs MCCB,100 Amps,16 KA complete all as specified and as directed. |
| 190 | M&L Earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanisediron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plateof SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed.NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate inpit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways,CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete. |
| 191 | Taking down ceiling fans 1200/1400mm sweep and exhaust fan 230/300 mm sweep, remaining/cleaning of dust properly cleaning, greasing& overhualing of bearings including refixing and connecting up all as directed by Engr-in-Charge. Note : Replacement of defective/worn out parts will be measured & paid for separately |
| 192 | S&F in repairs capacitor 2/2.5 mfd as directed (Make - Asian/Usha/Epcos of siemens) complete all as specified and directed. |
| 193 | S&F in repairsball bearing of exsiting ceiling fans complete all as specified and directed. |
| 194 | S & F in repairstwisted three core copper flexible cable of size 1.5 sqmm from connector to the ceiling rose complete all as specified and directed. |
| 195 | S & F in repairs‘U’ clamps complete with nut, bolts & split pins Heavy duty, suitable for existing ceiling fan complete all as specified and directed. |
| 196 | S & F in repairsM.S. rod for ceiling fans 3 ft long with ‘U’ clamp at one end other end with out nut bolts washers or screwed thread with check nuts & pin complete. |
| 197 | S & F in repairsNut of bolts washers for fan blades fixing of ceiling fan of any make/size/type as per site requirement (6 Nos for each set) complete, a suitable for existing ceiling fan on site complete all as specified and directed. |
| 198 | M & LRewinding of stator complete with super enameled copper wire of gauge/ weight of copper coil, quick varnishing oiling, greasing insulating materials including replacement of worn out parts like u/s cotter pin, nut, screw, check nuts and bolts as required including cleaning of body and testing of the size 1200/1400mm sweep ceiling fans and 230/300mm exhaust fans of any make/model complete all as specifed and directed.Note :- Sapre parts except mentioned above and rewinding to be replaced will be measured and paid seprately under respective items of schedule. |
| 199 | M & L Spray painting of two coats of synthetic enamel paint on ceiling/exhaust fans of any sizecomplete all as specified and directed by Eng-in-charge. |
| 200 | M&L Cutting chases, pinning in, making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, painting, cutting exceeding 10cm girth all as specified and directed. |
| 201 | Supply and laying or fixing or passing through pipe/wall/on pole, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 6 sq. mm nominal cross section for service connectionscomplete all as specified and directed by Engr -in- charge. |
| 202 | S & F Exhaust fan made of sturdy engineering plastic of 250 mm sweep 1200 RPM, voltage 230v, 50Hz, copper winding,complete with louvers shutter, including provision for fixing completeall as specified and directed. |
| 203 | S & F Exhaust fan made of sturdy engineering plastic of 300 mm sweep 1200 RPM, voltage 230v, 50Hz, copper winding,complete with louvers shutter, including provision for fixing completeall as specified and directed. |
| 204 | S & F Wall fan cyclotron metal frame with plasric body,400 mm sweep,1200 RPMvoltage 230v, 50Hz,copper winding including provision for fixing completeall as specified and directed. |
| 205 | S&F Electric Water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV,connection piece including 2 Nos 15 mm dia flexible barbed connecting pipe 45 cm long suitable for hot water supply with brass check nuts complete all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
