|
| 1 | Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out offfrom site etc complete all as specified and directed. |
| 2 | M & L for brick work using old size sub class \"B\" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 etc complete all as specified & directed. |
| 3 | Dismantling of AC sheet (corrugated,semicorrugated, etc.) including AC ridges as in roof coverings complete all as specified & directed. |
| 4 | S & F fo Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 5 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 6 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc.complete with & including brushing neat cement slurry (@ 3 Kg of cement per Sqm) for bonding of old concrete surface to new concrete, complete all as specified and as directed. |
| 7 | M&L for plain cement concrete 1:2:4 type B-1 (using20 mm graded crushed stone aggregate) as in floor/hardstanding etc surface finished fair and even without using extra cement complete all as specified & directed. |
| 8 | M&L for 10 mm thickvirtrified ceramic (Light shade) tiles polished area of each tile exceeding0.42 sqm but not exceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mmthick screed bed in CM 1:6 complete all as specified and directed. |
| 9 | M&L for 10mm thickvitrified ceramic ( Light shade) tilespolished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm, laidin vertical surface as in dado/skirtingetc over & including10 mm thick rendering in CM 1:4,set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing broken tiles and removing the allrubbish off from the premises complete all as specified and directed. |
| 11 | M & L for coloured Non digital paver vetrified exterior tiles 300mm X 300 mm X 10mm thick, in floors etc., over & including 15mm thick screed bed in CM 1:6, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as approved by Engr-in-Charge. |
| 12 | Dismantlingwall and ceiling boarding, any description, with frame work fixed in any position with nails/screwscomplete all as specified and directed. |
| 13 | S & F for providing aluminium snap gridframe work for false ceiling system withsize 605 mm x 605 mm, consisting of mainrunner of size 36.5 mm x25 mm x 1.4 mm (weight not less than @ 0.24 Kg/Rm) andcross Tee of size23.5 mm x 36.4 mmx 1.4 mm (weight not less than @ 0.191 Kg/Rm). The snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40 mm X 25 mm X 2 mm (weight not less than @ 0.36 Kg/Rm).The snap grid shall be fixed to ceilingsupporting hangers consisting of 2 mm diamild steel wire /GIwire, J-bolts ,nuts and washers as per manufacturer\"s instructions and complete all as specified and directed by Engr-in-Charge. |
| 14 | M & L for 4.0 mmthick Non asbestos fibre cement building boardsfixed in ceiling flat or slopingfixed or laid/ inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed by Engr-in-Charge. |
| 15 | Taking down cement plaster of brick or stone masonry etc including raking out joints , hacking for key & scrubbing down with water etc including removing of debris from outside of Mod land complete all as specified & directed. |
| 16 | M&L for 15mm thick rendering (external) on brick or concrete surface in cement mortar 1:4, finishing surface even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for rendering 10 mm thick onfair face of brick masonry/concrete surface etc in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surfaceof wall and applying 3.0 mm thick of wall care putty to make free from undulations of entite surface and applying two coats of distemper oil emulsion (OBD) paint complete all as specifiedand directed. |
| 19 | M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer including necessary scaffolding complete all as specified & as directed. |
| 20 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames)exceeding 1.50 Sqm but not exceeding 4.00 sqmeach and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed. |
| 21 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 sqmeach and removing from site and making good the disturbed surface of walls in cement mortar (1:3) complete all as specified & directed. |
| 22 | M&L for 18 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs, pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over & including 15 mm thick rendering in cement mortar(1:4)etc including dismantling of exsting slab complete all as specifed and as directed. |
| 23 | S & F powder coated anodised aluminium frame for doors, windows, sliding window, ventilators with one or more rebates, doors shutters of hollow rectangular/square sections includings aluminum hinges 100mm long with powder coated jointing cleats for fixing complete all as specified and directed. |
| 24 | S&F powder coated (with coating layer of minimum 50 micron thick)aluminium doors shutters ,aluminium section ( min weighing 1.10 kg/m) including necessary joining cleats glazing clips rubber packing anodised aluminium,snap beading screws, powder coated aluminium fittings such as peg stays 150mm long (1No.),100mm long hinges type B-21 (2Nos), suitable handle(02 Nos.) in each door top rail guide rail etc. complete all as specified and directed. |
| 25 | S & F forpowder coated (with coating layer of minimum 50 micron thick) aluminium window , ventilator shutters, track channel or fixed type without sash bar, aluminum section weighing min 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 26 | M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165& for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.complete all as specified and as directed. |
| 27 | S&F150 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed. |
| 28 | S&F 150 mmlong extruded aluminium alloy handles of cast type, anodisedcomplete all as specified& directed. |
| 29 | S & F in repairfor aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete etc all as specified & directed. |
| 30 | S&F of brass mortice lock,vertical type, size 100 mm long four levers (ISI marked) complete all as specified and directed. |
| 31 | M & L for 4.8mm thick plain sheet glass ordinary selected quality and glazing with oil puttyexceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engr-in-Charge . |
| 32 | S & F for 3.0 mm thick sheet tinted glassand glazing with oil putty not exceeding 0.50 sqm each pane complete all as specified and directed. |
| 33 | M&L for prepartion ofnew or previously untreated steel surface of any description ,not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified & directed. |
| 34 | M & L for cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for underpinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc., to store and rubbish not exc 50m complete all as specified and directed. |
| 35 | M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in hold fast complete all as directed . |
| 36 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15 cm thickness (above or below GL)complete all as directed. |
| 37 | M & L for 75mm thick, PCC 1:2:4, type C-2 using 40mm graded stone aggregate, as in sub base of floorcomplete all as directed. |
| 38 | M & L for forming contraction joints of 30mm x 10mm wide primed & filed with sealing compound Grade \"A\" complete all as specified and directed. |
| 39 | M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-2 (using 40mm graded crushedstone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 gradeand sand in the ratio 1:3 including necessary form work , complete all as specified and directed. |
| 40 | M&L for demolition of cement concrete (un reinforced ) in any description and in any position by mechanical tools and removing excavated material outside of MoD land, complete all as directed by Engr-in-Charge. |
| 41 | M & L for RCCM-25 Design Mix(20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps: seismic and other similar bands, plinth courses etc complete all as specified anddirected. |
| 42 | M&L for mild steel TMT bars 10mm dia and over grade Fe-500, cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed. |
| 43 | M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintles, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams etc. |
| 44 | M & L for sand filling under floors or in Foundations including watering and consolidation complete all as specified and directed. |
| 45 | M&L for hard core of broken stone or bouldergauge not exceeding 63mm deposited, spread & leveled in layers not exceeding15cm thick, watered and rammed to a true surface etccomplete all as specified& directed. |
| 46 | M & L for ATT treating the top surface of filled earth at the rate of 5 ltr of emulsion per Sqmm of surface of flooring complete all as specified and directed. |
| 47 | M & L for ATT treating the soil along with external perimeter of building at the rate of 2.25 ltr of emulsion per meter of the perimeter wall complete all as specified and directed. |
| 48 | M&L for mirror polish machine cut kota stone slab flooring 20mm to 22 mm thick( size not less than 575 mm X 575 mm), laid & jointed with grey cement slurry @ 2.0 Kg per sqm mixed with pigment to match the shade of the slab including grinding, rubbingwith beeswax polishing into mirror finish over & including 20 mm thick screed bed in CM (1:6) complete all as specifed & directed. |
| 49 | M& L for mirror polish machine cut Kota stone slab 16 to 18mm thick as in vertical surfaces such as skirting/dados in narrow width, laid and jointed with grey cement slurry pointed with coloured cement to match the shade of the slab including grinding rubbing with beeswax polishing into mirror finishover 10 mm thick backing coat in CM (1:4) etc complete all as specifed & directed. |
| 50 | M&L reinforced cement concrete M-25 (design mix)(using20 mm gradedcrushedstoneaggregate)as in foundation including rafts, footings,plinth beams, and mass concreteetc.complete all as specified and directed.Note : Reinforcement & form work will be measured & paid seperately under respective item of BOQ. |
| 51 | M&L reinforced cement concrete M-25 (design mix)(using20 mm gradedcrushedstoneaggregate)as incolumns,pillars,piers,popst and struts etc.complete all as specified and directed.Note : Reinforcement & form work will be measured & paid seperately under respective item of BOQ. |
| 52 | M&L reinforced cement concrete M-25 (design mix)(using20 mm gradedcrushedstoneaggregate)as in lslabs supported on walls, beams and column in floors, roofs, landings, balconines, deck slabs and in shelves etc complete all as specified and directed.Note : Reinforcement & form work will be measured & paid seperately under respective item of BOQ. |
| 53 | M&L reinforced cement concrete M-25 (design mix)(using20 mm gradedcrushedstoneaggregate)as in lintels beam, floor/roof Beams, cantilevers, bressummers, etc over 1.5m span, seismic bands complete all as specified and directed.Note : Reinforcement & form work will be measured & paid seperately under respective item of BOQ. |
| 54 | M & L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horiqontal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed. |
| 55 | Use & wasteof form work to sides of concrete foundation, base of coloumn ,rafts,footings, plinth beams, andplinth beamand similar work for rough finished flat surfaces of concrete complete all as specified and directed. |
| 56 | Use and waste of form work to sidesof columns,pillars,piers,post and struts for rough finished(square, rectangular or polygonal) surface of concrete complete all as specified and directed. |
| 57 | Use and waste of form work to sidesandsoffit oflintel Beam,floor/roof Beams, etcfor rough finished surface of concrete complete all as specified and directed. |
| 58 | Form work to edges of concrete flats, treads, breaks in floors window cills, concrete railing, openings in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified. |
| 59 | M&L for mild steel TMT bars 8mm dia and over grade Fe-500, as in stirrups cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed. |
| 60 | M&L for rendering 15 mm thick on brick masonry/concrete surface etc in CM (1:6) surface finished even & smooth using extra cement complete all as specified and directed. |
| 61 | M & L for rendering 5mm thick in CM 1:4 on concrete surface/chajja/ceiling etc finished even and smooth without using extra cement. |
| 62 | Supply onlywater proofing compound complete all as specified and directed. |
| 63 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where everrequired) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shallbe also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately). |
| 64 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Slidingmesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connectedaccessories. Net Opening will be measured for payment purpose. |
| 65 | S & F into Door/window/partitio of uPVC, figured glass of thickness 6mm pin head type in squares exc 0.5 sqm in each pane complete all as specified and directed. |
| 66 | S & F Aluminium coposite panel for external wall cladding the panel consisting of 5mm thick thermoplastic core with 2 coats of metallic finish of approved colour. Rate shall include to fix the panel into the door/partition of uPVC using CI coated Anchor, Fasteners, Galvanized bolt nuts and washer screws and aluminium riverts and other hardware\"s materials and to ensure water and air tightness complete all as specified and directed. |
| 67 | S & F mild steel conduit curtian rod with PVC coating fancy type drapery rod 20 mm dia of any colour as approved and fixed with bracket complete all as specified and directed. |
| 68 | M & L for preparation of newly plastered surface and applying two coats of oil bound distemper over a coat of primer including 3mm thick wall care Putty complete all as specified and directed. |
| 69 | M & L for preparation of newly plastered surface and applying three coat of white wash complete all as specified and directed. |
| 70 | M & L for application of water proofing treatment using APP modified roof membrane over non accessible/non approachable RCC roof slab /chajjah/canopy /parapet wall( horizontal /vertical surface) to be executed through approved applicator of the membrane manufacturer/authorized applicatorof the manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing naked roof surface properly with wire brush.(b)Applying forrendering 10 mm thick in cement mortar 1:4 on concrete / brick surfaces mixed with polymer based liquid water proofing compound@ 200 ml/50 Kg per Bag of cement ,finished, even and smooth without using extra cement over roof / sunken slab /wall complete(c) Applying approved bituminousbased primer(conforming to IS: 3384-1995) @ 0.50 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface.(d) Laying not less than 3mm thick APP (Atactic polypropylene Polymer modified prefabricated membrane) modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.00 Kg/Sqm. (ii)Non woven polyester weight not less than 160 gms/Sqm.(iii)Softening point of membrane not less than 150degree Celsius. (iv)Joint tensile strength-longitudinal not less than 150 Kg / Sqcm and transverse not less than 450 Kg /Sq.cm at230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N& transverse not less than 250N.(vi)Elongation of reinforcement not less than 30%.(vii) Impermeability under water pressure not less than 3 Kg/Sqcm.(e) APP modified polymeric membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (f) Applying two coat of bituminiousbased Aluminium Paint @ 0.3 Kg /Sqm over APP Membrane. |
| 71 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete incl fixtures and fittings suze as swithes, ceiling rose, pendant, regulator, ssockets, light fittingetc. removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as directed. |
| 72 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/Main Switch including old unserviceable MCCBs/MCBs, isolators, etc and making good to disturbed surface all as specified and directed at site. |
| 73 | M & L for point wiring for one light / fan /exhaust fan points/bell pointscontrolled by one way 5 Amp switch with 1100 volt grade PVC insulated-unsheathed 1.5 Sq mm multi stranded FRLSH copper conductor cable with continuous earth wire of PVC insulated-unsheathed 1.5 Sq mm multi stranded FRLSH copper conductor cable, drawn in & includingPVC conduit (suitable size) non metallic medium PVC conduit mediumgrade with fittings (ISI marked) not less than 20 mm size& sunken anodized pressed steel sheet boxes made out of not less than 1.6 mm thick sheet, covered with 2.8 mm thick laminated insulated cover make sheet fixed with brass screw for housing/fixing switches etc complete all as specified and directed. Note : Proper coding to be adopted. |
| 74 | All as per item no 73 above but one 5 Amps socket outlet on same board with accessories complete all as specified and directed. |
| 75 | All as per item no 73 above but one 5 Amps socket outlet on independent board complete all as specified and directed. |
| 76 | M & L forpoint wiring for 15 Amp power point controlled by one 15 Amps switch one way/metal clad industrial socketwith 1100 volt grade PVC insulated-unsheathed 2.5 Sq mm multi stranded FRLSH copper conductor cable with continuous earth wire of 2.5 Sq mm multi stranded FRLSH copper conductor cable PVC insulated-unsheathed, drawn in & includingPVC casing -N- caping non metallic/ non metallic PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia( as per site requirement)including clamps, screws gutties/plug etc& sunken anodized pressed steel sheet boxes made out of not less than 1.6 mm thick sheet, covered with 2.8 mm thick laminated insulated covercomplete all as specified and directed.Note : Proper coding to be adopted. |
| 77 | S & F switch piano flush button single pole one way 5 Amp, complete all as specified and as directed. |
| 78 | S & F switch piano flush button single pole one way15 Amp, complete all as specified and as directed. |
| 79 | S & F switch socket combination 2 in 1, 3 pin, 5Amp and 15 Amp flush type, universal, complete all as specified. |
| 80 | S & F switch socket combination 2 in 1, 3 pin, 5Amp flush type, universal, complete all as specified. |
| 81 | S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type universal complete all as specified and as directed. |
| 82 | S&F Stepped type electronic fan regulatoron the existing phenolic laminated sheet complete all as specified and as directed. |
| 83 | S&F ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body complete all as specified and as directed. |
| 84 | S & F LED retro type light fitting 1 x 20watt , 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engr-in-Charge. Make: Havells/Bajaj/CG/Philips |
| 85 | S & F LED security lights aesthetically designed roadway with new generation energy saving & environment friendly long life versattle pressure dia cast aluminium IP-65 road luminarie with high power LED as light source & exclisively designed polycarbonate cover alongwith electronic driver type street light fitting 60 watt capacity LED including all accessories duly pre-wired,fixing on including provision of two core flexible copper cable of size 2.5 sqmm not less than 1.5 mtr long for connectioncompletecomplete all as specified & directed. |
| 86 | S&F in repair of bracket made of GI light grade pipe 1.2 Mtr long of size 40 mm bore bend to shape as per site requirement fixed to Bldg/wall with 40 x 5 MM -02Nos, size clamps bolts, Nuts, washers including painting two coats of aluminium paint over a coat of primer complete all as directed. |
| 87 | S&F in repair LED light fitting1X9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 88 | S & F in repair LED luminairs 600mm x 600 mm,42 watt,220 voltACrecessed type with high efficiency PMMA diffuser soft free light complete with drivers, holsers, LED lamps suitable roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 89 | S & Fplasticbody Exhaust fan of 380 mm sweep blade with louvers shutter , frame single phase ,240 V,50 Hz,900 RPMAC ,copper winding, including provision of hole, mounting frame, nut, bolts, washer, fasteners etc and connecting exhaust fan to ceiling rose including provision of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection including cutting of wall and finishing of plaster complete including old/unsv taking down and deposit to AGE E/M store yard complete all as specified & directed. |
| 90 | S & F sheet metal enclosurespowder coated for DBs when MCBs to used singlepole and neutral (SPN) double door 240 volts, 8 way with IP-43 IK-09 protection including 200 Amp bus bar and neutral link (ISI marked) EARTH BAR & DIN RAIL confirm to IS:13032-1991 DB complete all as specified and as directed. |
| 91 | S & F sheet metal enclosurespowder coated for DBs when MCBs to used singlepole and neutral (SPN) double door 240 volts, 4 way with IP-43 IK-09 protection including 200 Amp bus bar and neutral link (ISI marked) EARTH BAR & DIN RAIL confirm to IS:13032-1991 DB complete all as specified and as directed. |
| 92 | S&F Amp rating 240V, 10KA\"B\" curve miniature circuit breaker (MCB) of single poles and neutral (SPN) and current carrying capacity 32 Ampwith breaking capacity 10 KA, in the MCB DB with connection testing and commissioning complete all as specified and as directed. |
| 93 | S&F240V, 10KA\"B\" curve miniature circuit breaker (MCB) of single poles(SP) and current carrying capacity 5 to 32 Amp with breaking capacity 10 KA ,in the MCB DB with connection testing and commissioning complete all as specified and as directed. |
| 94 | M & Lfor Sub main wiring two single core 6.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of 6.0 SqmmPVC insulated unsheathedFRLSH multi stranded copper conductor cablefor earth wire drawnin & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia, complete and and testing on completion including taking down of existing sub main wiring complete all as specified& directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of conduit shall be measured as one RM. |
| 95 | Supply, laying ,jointing ,testing and commissining LT cable, XLPE Insulated ,armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sq.mm. 3.5 core including taking down of existing cable complete all as specified & directed. Note:- 1. Excavation & earthwork shall be measured & paid under respective item.(2) All Necessary T & P required shall be arranged by the Contractor. |
| 96 | Excavation in trenches in any type of soil not exceeding 0.45 metre deep and not exceeding 0.50 mtr width and getting out soil including forming bottom surface to required slope/gradient forlaying cables/pipes, foundations, laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed. |
| 97 | M&Lfor Returning, filling in including spreading, leveling, watering and well ramming in layers ofnot exceeding 25 cm thickafter the cables & pipes etc. are laid, jointed & testedand foundations complete all as specified and directed by Engineer-in-Charge. |
| 98 | Removal of surplus excavated spoilnot exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified. |
| 99 | Supplying & Laying factory made un-reinforced pre-cast flat concrete cable protection cover of class LV , type- I, size 250 mm x 150mm x 40mm,complete all as specified and directed by the Engineer-in-Charge. |
| 100 | M&L sand filling in cable trenches for cable protection for clean dry sand unwashed including gently punning in a layer of 15 cm and 8 cm (total 23 cm) inthickness all across the laid portion of LT cable in trenches& sand filling under floor complete all as specified and directed. (Note:-Punned thickness shall only be considered for payment) |
| 101 | M&L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 (using 20 mm graded stone aggregate ) including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testingincluding taking down existing earthing complete all as specified and directed. Note : Earth test result should not less than one Ohm. |
| 102 | S & F Socket outlet 2 in 1, 3 pin, 5Amp and 15 Amp flush type, universal, complete all as specified. |
| 103 | S & F lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified. |
| 104 | S & F LED bulb of capacity 15 watt , lumen out put (500)lm ,length 102 mm dia56 mm , base cap B22 (ISI mark) complete all as specified and as directed by Engr-in-Charge. |
| 105 | Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed. |
| 106 | S & F 40mm dia bore galvanize iron pipe light grade, bent to shape of length 1.50mtr with flat iron clamp of size 50mm x 6mm nut and bolts of 12mm dia100mm long including washer duly painted with two coat of synthetic enamel paint over a coat of red oxide primer on mild steel surface including preparation of surface including fixing on wall complete all as specified and directed. |
| 107 | S & F in repair sheet metal enclosurespowder coated for DBs when MCBs to used singlepole and neutral (SPN) double door 240 volts, 8 way with IP-43 IK-09 protection including 200 Amp bus bar and neutral link (ISI marked) EARTH BAR & DIN RAIL confirm to IS:13032-1991 DB complete all as specified and as directed. |
| 108 | S & Famp rating 240V, 10 kA \"C\" Curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed.Make: Indo Asian or itsequivalent make i Havells/Standard/L & T complete all as specified. |
| 109 | Supply, laying ,jointing ,testing and commissining LT cable, XLPE Insulated ,armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq.mm. 4 core including taking down of existing cable complete all as specified & directed. Note:- 1. Excavation & earthwork shall be measured & paid under respective item.(2) All Necessary T & P required shall be arranged by the Contractor. |
| 110 | Supply, installation and testing hi wall Split indoor/outdoor complete Air Conditioner, electric driven, single phase, 230 Volts, 50 Hz of capacity 1.5 TR with high efficiency with in built air ionizer and plasma filter for better indoor air quality unit complete with PCB board and with cordless remote control unitoperation system with refrigerant gas, minimumBEE 5 star rating,AC supply complete including copper pipe insulation etc and above complete all as specified and directed with comprising of following .:-(a)Indoor unit with three speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water.(b)Out door unit comprising of Compressor with motor, air cooled copper condenser with fan and motor unitshall be installed out side the building/ on roof.(c)Refrigerant copper pipe for suction and discharge line with insulation , condensing water drain pipe& protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable.(d)Making good the disturbed surface to match the existing surface after plugging the hole etc.(e) for Installation powder coated MS bracket fixed on wall as per Manufacture\"s instruction with necessary grouting MS hold fast, bolts, washers duly 1.5 TR AC complete all as specified and directed. (f)Electrical cable required to connect out door unit and indoor unit to voltage stablizer shall in quoted rate under this item.Make: O-General/Mitsubshi/Daikan |
| 111 | Supply and fixVoltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 V to285 V with output voltage stablized at 230 V with accuracy of + 2.5 % and capacity 5 KVA complete all as specified and as directed. |
| 112 | S & Fsingle pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp breaking capacity 10 KA ,\"C\" series complete all as specified and as directed. |
| 113 | S & F Miniature circuit breakers ISI marked 240 volt, 50 Hz, double pole 40 Amps, B Curve breaking capacity 10 KA complete all as specified and directed. |
| 114 | M & L in repair for point wiringPVC concealed rigid non metallic PVC Conduit medium grade with fitting (ISI marked) not less than 20 mm dia with multi stranded FRLSH copper conductor cable of size 4.0 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and sunken anodized pressed steel sheet boxes made out of not less than 1.6 mm thick sheet with bakelite sheet 2.8 mm thick and PVC insulated FRLSH cable of size 4.0 Sqmm as earth continuity conductor for AC point controlled by metal clad industrial socket Completed all as specified and directed by Engineer -in-Charge |
| 115 | M & L for laying GI tubing light grade 40 mm dia with all fittings for cable protection including GI Clamps nut bolts and washer etc complete all as specifed and directed. |
