|
| 1 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping including diamantling of old wall and ceiling board complete all as specified and as directed. |
| 2 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications including dismantling of old wall panelling complete all as specified and as directed. |
| 3 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed. |
| 4 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws including dismantling of old Plain corrugated Asbestos cement sheets complete all as specified and as directed. |
| 5 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old Plain corrugated Asbestos cement sheets complete all as specified and as directed. |
| 6 | S&F pre-paintedgalvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 7 | S&F pre-paintedgalvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 9 | S&F steel work in tubular trusses including special shaped washer,Piller etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and as directed. |
| 10 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A complete all as specified and as directed. |
| 11 | S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed. |
| 12 | M&L for second class hardwood as in scantlings clean sawn timberfixed including dismantling old timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and as directed. |
| 13 | M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13and n.exc 25 sqcm complete all as specified and as directed. |
| 14 | M&L for 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers without using extra cement using water proofing compound @ 3% by weight of cement for finished even and smooth including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including M&L for GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed. |
| 15 | M&L for rendering 12 mm thick in CM (1:6) on other side of lathing finished even and smooth without using extra cement complete all as specified and as directed. |
| 16 | Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 17 | Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 18 | Material & labour for 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 19 | S&F factory made 30mm thick flush shutter, solid core construction, with particle board core and plywood face panels complete all as specified and as directed. |
| 20 | S&F Powder Coated aluminium( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specified and as directed. |
| 21 | S&F Anodised powder coated aluminium door shutter, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws complete all as specified and as directed. |
| 22 | S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, handle , tower bolt anodised aluminium snap beading, screws complete all as specified and as directed. |
| 23 | S&F Aluminium decogrills made out of fixed indepently on outside of sliding window system in Aluminium C channelon top & Bottom, wt of aluminium alloy grill not less than 1.5 Kg/m2 complete all as specified and as directed. |
| 24 | S&F sheet glass4mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 25 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and as directed. |
| 26 | S & F 100 size stainless steel butt hinges complete all as specified and as directed. |
| 27 | S & F 75 size stainless steel butt hinges complete all as specified and as directed. |
| 28 | Supply & Fixing150 mm Aluminium handles, cast type, anodised complete all as specified and as directed. |
| 29 | Supply & Fixing100 mm Aluminium handles, cast type, anodisedcomplete all as specified and as directed. |
| 30 | S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 31 | S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 32 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 33 | S&F Door closer hydraulically regulated, designation No. 1 universal type, aluminium (extruded section body) suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed. |
| 34 | M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished fair and even without using extra cement including taking down old plaster from its position complete all as specified and as directed. |
| 35 | M&L for rendering 15mm thick in CM (1:4) other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking down old plaster from its position complete all as specified and as directed. |
| 36 | M&L for preparation of new plastered or un plasteredsurface of walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 37 | M&L for applying 2 mmthick Birla white putty/JK white wall care putty on walls complete all as specified and as directed. |
| 38 | M&L for applying two coats of oil bound distemper over a coat of primer on new plastered surfaces of walls including preparation of surface complete all as specified and directed. |
| 39 | M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coats of synthetic enamel paint over a coat of redoxide primer on new surfaces in any tint complete all as specified and directed. |
| 40 | M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified and as directed. |
| 41 | M&L for preparation of oldsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying one coat of synthetic enamel paint in any tint complete all as specified and as directed. |
| 42 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint complete all as specified and as directed. |
| 43 | M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oilbound distemper on walls complete all as specified and as directed. |
| 44 | M&L for Preparation of old surfaces of wallsapplying one coat of cement base paint complete all as specified and as directed. |
| 45 | Demolition of cement concreteof any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 46 | M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide that area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed |
| 47 | M&L for cement concrete type C-2 (1:2:4) (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed. |
| 48 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms mouldscomplete all as specified and as directed. |
| 49 | S&F 20mm diaHarrison rails, mild steel, chromium plated with fixing brackets, stops, rollers complete all as specified and as directed. |
| 50 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches complete all as specified and as directed. |
| 51 | M&L for brick work with sub class \"B\" bricks (using old size burnt bricks) straight or curved on plan exc 6m mean radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed . |
| 52 | M&L for brick work with sub class \"B\" bricks (using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed. |
| 53 | M & L for PCC 25mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate)as in levelling course of floor complete all as specified and as directed. |
| 54 | M&L for Vitrified Ceramic tiles (Light shade), (8-9) mm thick (square/ rectangular) polished,area of each tiles not exceeding 0.36 sqm, laid in floorsover and including 15mm thick screed bedin CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles includingdemolition of old Stone slabs/tiles of any description removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 55 | All as per Item No. 54.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM (1:4). |
| 56 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification complete all as specified and as directed. |
| 57 | S&F factory made solid panel PVC door shutter 30mm thick (style).consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with eat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing in the frame at site as per specification complete all as specified and as directed. |
| 58 | S&F vitreous china water closet Padestal pattern (white) including fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as specified and as directed. |
| 59 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,in floors laid over and including 15mm thick screed bedin CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles includingdemolition of old Stone slabs/tiles of any description removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 60 | M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile laid over and including baking coat of 10 mm thick in CM (1:4)includingdismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisesincludingdemolition of old Stone slabs/tiles of any description removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 61 | Taking upor down steel tubing and connections includingwith all fittings for 15 mm bore GI tubing complete all as specified and as directed. |
| 62 | Taking upor down steel tubing and connections includingwith all fittings for 20 mm bore GI tubing complete all as specified and as directed. |
| 63 | Supply and laying 16 mm outer diameter CPVC pipe SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as direcetd. |
| 64 | Supply and laying 20 mm outer diameter CPVC pipe SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as direcetd. |
| 65 | S&F 15mm bore dia bib taps long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 66 | S&F 15mm dia bore fancy type swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed dwon high pressure, with or wothout lettered `Hot\" or `Cold\" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 67 | S&F CP angle cock 15mm cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 68 | S&F vitreous china wash hand basin includingbrackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. |
| 69 | S&F vitreous china half stall urinalwhite, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe(Minimum weight 60gms)& 32 mm waste coupling of PTMT (half or full threaded)complete all as specified and as directed. |
| 70 | S&F Grating doom 100mm dia of PTMT (min wt -25gms) complete all as specified and as directed. |
| 71 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 72 | S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (min wt - 170 gms) complete all as specified and as directed. |
| 73 | S & F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and as directed. |
| 74 | S&F soap dish chromium plated steel/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and as directed. |
| 75 | S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and as directed. |
| 76 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 77 | S&F looking mirror ofsize 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 78 | S&F (SWR) bends of 110 mm dia complete all as specified and as directed. |
| 79 | S&F PVC (SWR) bends of 75 mm dia complete all as specified and as directed. |
| 80 | S & F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, in floors, fixed to walls including making good the disturbed surfaces complete all as specified and as directed. |
| 81 | S & F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, in floors, fixed to walls including making good the disturbed surfaces complete all as specified and as directed. |
| 82 | S&F rotational moulded polyethylene 1000Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position,including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed. |
| 83 | S&F 4.00 mm dia GI wirefor mosquito and hook fixed in wall complete all as specified and as directed. |
| 84 | M&L for ATT treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed. |
| 85 | M&L for ATT treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floorscomplete all as specified and as directed. |
| 86 | M&L for 100mm thick Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 87 | M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed. |
| 88 | M & L for block boards, 18/19 mm thick, , grade 2 quality, e x t e r i o r grade, , commercial type fixed with screws to timber frame work , for cup board including lipping / beading as required complete all as specified and as directed. |
| 89 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/ loose soil complete all as specified and as directed. |
| 90 | M&L for Plain Cement concrete, type B-2, (1:2:4) (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 91 | S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W complete all as specified and as directed. |
| 92 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia complete all as specified and as directed. |
| 93 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nutexc 30cm long and dia 25mm complete all as specified and as directed. |
| 94 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan andn.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 95 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed. |
| 96 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed. |
| 97 | M&L for Rendering 10mm thick cement plaster in CM (1:4) on brick work/concrete surfaces other than fair faces finished even and smoth without using extra cement complete all as specified and as directed. |
| 98 | M&L for preparation for newly plastered surfaces and applying two coats of white wash complete all as specified and as directed. |
| 99 | Surface excavation n exc 30 cm deep and average 15cm deep in soft/loose soil complete all as specified and as directed. |
| 100 | M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 101 | M&L for machine pressed precast concrete interlocking paver block any shape & size conforming to IS15658-2006 of 80mm thickness,M-40 grade, using grey cement & no pigmentlaid over and including 25 mm thick sand cushioning including watering and consolidation for laying interlocking blocks etc complete all as specified and as directed. |
| 102 | M&L for 75 mm thick Plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 103 | M&L for mirror polished machine cut kota stone slab flooring 20-25 mmlaid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, laid over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed |
| 104 | M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc of suitable size as required at site complete all as specified and as directed. |
| 105 | Onelight pointcontrolled by one, one way switch . |
| 106 | One Exh/Ceiling fan point controlled by one, one wayswitch. |
| 107 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 108 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 109 | OneCall bell controlled by one, one way switch . |
| 110 | All as per item No-104.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 111 | M&L for Point wiring for Onelight pointcontrolled by one, one way switch complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc of suitable size as required at site complete all as specified and as directed. |
| 112 | S&F Switch piano flush type single pole, one way 5Acomplete all as specified and as directed. |
| 113 | S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and as directed. |
| 114 | S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and as directed. |
| 115 | S&F Switch Socket combination, 2 in 1, 5 pin 16A flush type complete all as specified and as directed. |
| 116 | S&F stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed. |
| 117 | S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. |
| 118 | S&F Bell AC 230 volts musical type complete all as specified and as directed. |
| 119 | S&F for bell push switch 5 amps piano type flush typecomplete all as specified and as directed. |
| 120 | S&F Modular Switch 1 way 6A,1 module complete all as specified and as directed. |
| 121 | S&F modular switch 1 way 16A, 1 module complete all as specified and as directed. |
| 122 | S&F Modular Socket ,6A/2/3 pin combined 2 module complete all as specified and as directed. |
| 123 | S&F Modular Socket ,6A/16A-2/3 pin combined 2 module complete all as specified and as directed. |
| 124 | S&F Modular Fan step regulator, 120W - 2 module complete all as specified and as directed. |
| 125 | M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including taking down old unsv one complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length |
| 126 | M&L for sub main wiring with two runs of2.5 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including taking down old unsv one complete all as specified and as directed. NOTE:- two runs of 2.5 Sq mm + one run of 2.5 sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length |
| 127 | S& F in repairs Lamp holder, PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified and as directed. |
| 128 | S& F LED Lamp 0.5 Watt (Red/Green) complete all as specified and as directed. |
| 129 | S&F 20W LED, 4\", Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose to the light fitting complete all as specified and as directed. |
| 130 | All as per item No 125.00 above but10 wattLED, 2\" batten, Wall mountedwith polycarbonate housing/ batten. |
| 131 | Supply , fixing in repairs and testing of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape complete all as specified and as directed. |
| 132 | S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt,white/warm 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size complete all as specified and as directed. |
| 133 | S&F in repairs ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. Note : Old ceiling fan shall be deposited to MES Store. |
| 134 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm compete all as specified and as directed. |
| 135 | Supply and Fixing for Single pole andneutral enclosure witha two pin and earthplug and socketcomplete with one single pole MCB 20 Amps Complete all as specified and as directed. |
| 136 | S&F MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs and cutting chases to wall for fixing DB and making good the disturbed surfaces to match with existing specification complete all as specified and as directed.Note : MCBs will be measured and paid separately. |
| 137 | S&F MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv DB and making good the disturbed surfaces to match with existing specification , complete all as specified and as directed..Note : MCBs will be measured and paid separately. |
| 138 | S&F MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity and making good the disturbed surfaces to match with existing specification , complete all as specified and as directed.Note : MCBs will be measured and paid separately. |
| 139 | S&F in repairs MCB TPN 40 to 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB \"C\" seriescomplete all as specified and as directed. |
| 140 | S&F MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB \"C\" series MCB complete all as specified and as directed. |
| 141 | S&F in repairs MCB SPN 40-63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB \"C\" seriescomplete all as specified and as directed. |
| 142 | S&F in repairs MCB SP 5-40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB \"C\" seriescomplete all as specified and as directed. |
| 143 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete Including taking down old unsv cable complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. |
| 144 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. |
| 145 | M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: Punned down thickness shall be measured and paid. |
| 146 | M&L for laying brick sub class \"B\" old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed |
| 147 | Supply & laying tubes \" Light grade\" galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 25 mm dia bore complete all as specified and as directed. |
| 148 | Supply & laying tubes \" light grade\" galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. |
| 149 | Material & labour for cutting/ digging of existing Hard surface of cement concreet/Bituminous road of size not less than 45 cm in width and 20 cm deep for laying of LT cable& making good to the disturbed surfaces by providing PCC or same material after laying of pipe line and returning filling of soil complete all as specified and as directed. |
| 150 | Taking down and M&L for overhauling/ servicing of ceiling fan of any size / sweep (i.e 1200/1400mm sweep) and make comprising dismantaling, cleaning internally and externally and cleaning / lubricating of bearing / bushes using fresh lubricant (Oil grease) re-assembling, checking of split pin, hook assembly & hanging andincluding provision of cable fromceiling rose or connector to fan and testing for proper functioning complete all as specified and directed. |
| 151 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i)The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI frame with CI coverfunnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 441 of MES SSRPart-II. (ii)Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. |
