|
| 1 | DTR 11/0.4 KV BIS Level-III Conventional 63 KVA |
| 2 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 3 | 11 KV D.O. Fuse Unit Polymer type |
| 4 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 5 | Danger Boards Enamelled 11 KV |
| 6 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 7 | Bi-metallic clamps Distribution Transformers Bushing |
| 8 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 9 | XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts |
| 10 | XLPE Cable 1 core unarmoured 50 sqmm Aluminium conductor 1100 Volts |
| 11 | M.S.Channel 100x50x6mm |
| 12 | 11 KV Strain hardware (T&C type) fittings |
| 13 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 14 | Back Clamp for H-Beam of MS Flat 65x8 mm (Each Weight 1.92Kg) |
| 15 | Transformer mounting Channel (100X50x6 mm.) |
| 16 | Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels |
| 17 | D.O.Mounting Channel 75x40x6mm |
| 18 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 19 | L.T. Distribution box with Isolator on Incoming with HRC fuse for 63 KVA DTR (200 Amp. Isolator & 6 SP of 60 Amp.) |
| 20 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 21 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 22 | G.I.Pipe 40 mm Dia C grade type |
| 23 | EARTHING SET (40MM , 3 METER GI PIPE , GI WIRE, EARTHING CLMAP AND NUT BOLT) |
| 24 | Galvanized nut & bolt with washer |
| 25 | M.S.Nuts with Bolts |
| 26 | Stay set complete without Stay wire 16 mm. (Painted) |
| 27 | Stay Insulators 90X65mm |
| 28 | Red oxide paint |
| 29 | Aluminium paint |
| 30 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 31 | Complete jumpering of DTR |
| 32 | Concreting of structures & foundation (1:3:6) |
| 33 | DTR S/s fencing (31 feet) of 5\" barbet fencing on PCC support of 7No, 6\" Height |
| 34 | Double Gate (2No-2.5\"x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 35 | G.I. STRIP 25X3 MM1 |
| 36 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 37 | Bentonite compound powder |
| 38 | Erection Cost |
| 39 | GST @ 18% on Total Material Amount and Erection Cost Please Enable Macros to View BoQ information |
