Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | B/R PORTION :Dissmantling wallandceilingboards(fibre,pulp, insulation, etc.) orinsulationboards/slabs/ blankets, any thickness, includingcover fillets complete all as specified and as directed. |
| 2 | S&F GI powder coated snap grid frame work of size 600X600mm having Main Tee of 24X32mm, Cross Tee 24X26mm and L angle of 24X24mm for false ceiling along with Hangers 2 mm dia GI (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed. |
| 3 | M&L False ceiling of 8mm thick gypsum ceiling tiles with front PVC laminated & back Aluminium foil, Ceiling board of dimension 595X595mm with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre grid (Frame work of ceiling shall be measured and paid separately) complete all as specified and as directed.Make: Diamond, Everest or Equivalent. |
| 4 | Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 5 | M&L 25 mm thick PCC(1:2:4)type B0 using 12.50 mm graded stone aggregate as in floors complete all as specified and as directed. |
| 6 | M&L Virified Ceramic tiles double charged/ultracharge shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles complete all as specified and as directed. |
| 7 | M & L Virified Ceramic tiles double charged/ultracharge shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm (size 800mmx 800mm) , for skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering coat/backing layer in CM (1:4) complete all as specified and as directed. |
| 8 | M&L for non skid colour ceramic tiles of 300mm x 300mm of8 to 10 mm thick (square/ rectangular) area of each tile exceeding0.11 sqm but not exceeding0.16 sqm of approved 1st qualityin floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles complete all as specified and as directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 10 | M&L Glazed Ceramic tiles coloured, of size600mmX350mm/300mmX(7-9)mm thick approved 1st quality asinvertical surfaces such as skirting/ dados and risers to steps etc, including 10 mm thick rendering coat/backing layer in CM (1:4)set and jointed in neat cement slurry and pointedwithwhite/ coloured cement to match the colour of tiles complete all as specified and as directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above. |
| 11 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid / bedded and pointed in any mortar complete all as specified and as directed. |
| 12 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 13 | Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and as directed. |
| 14 | M&L 18-20 mm thick Sadarahalli Stones slab (of any type), in floors, steps,Skirting and risers etc any colour, Polished bedded over cement screed bed 20mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 15 | Demolition of cement concrete (Reinforced) of any description and in any position complete all as specified and as directed. |
| 16 | S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame and SS beading to be used in corners or where ever reqd complete all as specified and as directed.Note : Rate of SS beading is incl in the rate quoted. |
| 17 | S & F 5mm thick PVC sheet fillet of width35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 18 | Taking down Chowkhats or frames withshutters n exc 1.5 sq. meach complete all as specified and as directed. |
| 19 | Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed. |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat (for Single rebate) of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat (for double rebate) of size65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flushshutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: Stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain Glazed/skeletonshutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: Stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 24 | S&F 100 mm long SS Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for WPC door frame along with strong adhesives to Brass screws for fixing complete all as specified and as directed |
| 25 | S&F Factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories is included and packing the gaps with silicon sealent complete all as specified and as directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)(A) Area not exceeding 2.00 sqm each. |
| 26 | S & F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both havingwmulti-chambered frame andmullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mildsteel section made from roll forming process ofrequired length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, G.I. fasteners 100 x 8 mmsize for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion weldedat all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixinghardware\"s and drainage of water etc. After fixingframe the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealantover backer rod of required size and of approvedquality, all complete as per approved drawing complete all as specified and as directed. (Glass shall be paidseparately). |
| 27 | M & L MS Framed work such as grills,gratings, etc with ends of barsshouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors;ladders; framedbalusters; walkways; railings; framework ofwater tanksand similar workconforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 28 | S&F 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed. |
| 29 | S&F 150 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed. |
| 30 | S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 31 | S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed. |
| 32 | S&F 140 mm longfloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed. |
| 33 | Supply only Wire netting of stainlesssteel wire 1.4mm dia fixed with tinned tacks of stainless steel wirestaples for skeleton shutters etc complete all as specified and as directed. |
| 34 | S&F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty exc 0.5sqm in each pane complete all as specified and as directed. |
| 35 | S&F in repairs 25 mm dia Stainless steel curtain rodswith fixing brackets, End caps, stops, rollers etc.and taking down old pipe complete all as specified and as directed. |
| 36 | S&F 18/19mm Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed. |
| 37 | M&L 1mm thick Laminate sheet (sunmyca sheet) glossy finish any colour paste with favicol on plywood/ Block board for cabinet and cupbord, commercial type on one sides complete, as specified and as directed. |
| 38 | S&F Stainless steel Handle 100mm dia complete all as specified and as directed. |
| 39 | S&F Clip on soft hinges full overlay complete all as specified and as directed. Make : Godrej |
| 40 | Extra over rates of 18/19mm thickparticle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed. |
| 41 | Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed. |
| 42 | M&L Stainless steel Basket any type / any size fixing complete all as specified and as directed. |
| 43 | Dismantling of existing PVC 250-500 ltrs water tank complete all as specified and as directed. |
| 44 | S&F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position complete all as specified and as directed. |
| 45 | S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed (minimum weight 15 mm-142gms/20mm-210gms) all as specified and as directed. |
| 46 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and as directed. |
| 47 | Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and as directed. |
| 48 | All same as per item No.47 here in before but 20 mm bore complete all as specified and as directed. |
| 49 | S&F16mm CPVC pipe outer dia with SDR 13.5pipes & plain CPVC SDR 11 fittings fittings intrenches, floors, walls etccomplete all as specified and as directed. |
| 50 | All as per item No.49 above but 20mm bore complete all as specified and as directed. |
| 51 | M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and as directed. |
| 52 | S&F in repairs Counter top wash hand basin oval shaped550x430x195mm complete all as specified and as directed. Make: Parryware or equivalent |
| 53 | S&F in repair 15 mmbore CP fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 54 | S&F in repairs 32mm Dia PVC waste pipe for sinks or wash basins complete all as directed and as specified. |
| 55 | S&F in repair 15 mm bore WHB mixertaps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as directed. Make : PRAYAG / CERA or equivalent. |
| 56 | S&F in repairs 32mm CP Bottle traps for washbasin/urinal outlet complete all as specified and asdirected. Make: Prayag or equivalent in other make |
| 57 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..and Seat cover for pedestal pan in repairs withcomplete all as specified and asdirected |
| 58 | S&Fwater closet \"S\" trap Ivory colour 680 x 370x 750mm with soft close seat cover with twin flusing cisternfitted on floor (One piece Commode with flushing cistern)with wall distance 225mm +/- 10mm from the wall in repairs complete all as specified and as directed. Make : CERA / Parryware or equivalent. |
| 59 | Supply and fix 15 mm bore PVC connection pipe 45cm long withbrass nuts and washers on both ends all asin repairs complete all as specified and asdirected |
| 60 | S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long withbrass nuts and washers complete all as specified and as directed. |
| 61 | S&F in repairs brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed.Make : Prayag/Parryware or equivalent |
| 62 | S&F in repairs brass chromium plated health faucet 15mm dia reinforced pipe fitted topipe complete all as specified and as directed.Make : Prayag/Parryware or equivalent |
| 63 | S&F in repairs brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.Make: Prayagor quivalent in other make. |
| 64 | S&F in repairs brass CP shower rose with arms 75 mm size fixed complete all as specified and as directed. |
| 65 | S&F 15mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and as directed.Make: Prayag/Parryware or equivalent. |
| 66 | S & F Acrylic Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and as directed. |
| 67 | S&F CP Towel ringcomplete all as specified and as directed. |
| 68 | S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws andwooden/plastic cleats. and fixed in complete all as specified and as directed. |
| 69 | S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and as directed. |
| 70 | S&F in repair Stainless Steel Peg set of 4 No Pegs fixed withand including CP brass screws and wooden/Plastic cleats and fixed complete all as specified and as directed. |
| 71 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 72 | S&F SS Grating round 140 mm dia(Minimum weight 50gms) and fixed in repairs complete all as specified and as directed. |
| 73 | S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs complete all as specified and as directed. |
| 74 | Demolition/Dismantling of drain pipes any type at any position complete all as specified and as directed. |
| 75 | S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed. |
| 76 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 77 | S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed. |
| 78 | S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 79 | S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed. |
| 80 | S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed. |
| 81 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 82 | M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling complete all as specified and as directed. |
| 83 | M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc complete all as specified and as directed. |
| 84 | Material and labour for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:4 complete all as specified and as directed. |
| 85 | M&L sand filing under floors including watering and consolidation complete all as specified and as directed. |
| 86 | M&L Rubberised machine pressed precast concrete coloured interlocking paver block any shape and size fixed with gray cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Gradecomplete all as specified and as directed. |
| 87 | M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B-0 using 12.5mm graded stone aggregate complete all as specified and as directed. |
| 88 | M&L for providing reinforced precast cement concrete type C1 1:3:6 set in cement mortar 1:6 as in cover slabs as in drain covers complete all as specified and as directed. |
| 89 | M&L for TMT bars 10 mm dia and over ,cut to length bent to shape required including cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete all as specified and as directed. |
| 90 | Removing excavated/demolished material exc 250 m n.exc 500m or out of MOD land and depositing where directed at a level n.exc 1.5 km above the starting point complete all as specified and as directed. |
| 91 | M&L Roughening surfaces of old concrete floor/roof surfaces by picking, sweeping clean and washing down with water to remove dust,etc and Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces complete all as specified and as directed. |
| 92 | M & L Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces complete all as specified and as directed. |
| 93 | Material and labour 40mm averagethick PCC nominal mix 1:2:4 type B0 (12.50mm graded stone aggregate) for roof treatment etc complete all as specified and as directed. |
| 94 | M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 2% by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 95 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 96 | M & L for preparation of concrete surfaces free from loose materials, fungus & applying two coat ofliquid polyurethane membraneof smart care damp block 2Ka two component acrylic polymer modified cementious high performance coating to be appliedby roller/brush and timing for applying the coat is to be between4 to 6 hrs (1st & 2nd coat) complete all as specified and as directed. |
| 97 | Dismantling rolling shutter along with anchor bolt, shafts and all necessary fittings including making good complete all as specified and as directed. |
| 98 | S & F Steel rolling shutters, with outball bearing, as specifiedincluding top cover, anchoring rod, hasp and stapleand one shop coat of primer;erected in position as indicated, complete:push pull ormanual type complete all as specified and as directed. |
| 99 | S & F Safety lever locks mild steel with 4 levers forrollingshutters complete all as specified and as directed. |
| 100 | S & F Ball bearing for rolling shutters complete all as specified and as directed. |
| 101 | Dismantling timber scantlings 40 Sqcm and over unframed work in fillets, rails, posts, rafters, purlins, etc. in section and in any position complete all as specified and as directed. |
| 102 | S&F of Mild steel Hollow Square/Rectanguler sections as in main and cross beams, hip and jack rafters, hollow/solid section columns: purlins where connected to common rafters and running rails and guids for sliding doors: fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 103 | DismantlingPlain or corrugated steel sheeting, any thickness, thickness, including Nainital or similar pattern roofcoverings complete all as specified and as directed. |
| 104 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsas specified complete all as specified and as directed. |
| 105 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 106 | M & L for providing and fixing stainless steel (Grade 304) railing made of hollow/square tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includin fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 107 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed. |
| 108 | M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed. |
| 109 | M&L Reinforced concrete pipes, class NP3 150mm bore, laid and jointed complete with collars etc complete all as specified and as directed. |
| 110 | Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed. |
| 111 | M&L Rendering 10 mm thick in CM 1:3 oncelling surface, finished even and smooth with out using extra cement complete all as specified and as directed. |
| 112 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even complete all as specified and as directed. |
| 113 | M&L Rendering 15 mm thick in CM 1:6 onbrick massonry surfaces of walls, finished even and smooth with out using extra cement complete all as specified and as directed. |
| 114 | M&L preparation of newly plastered surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer and chalk whitingwith using of all fixtureswhich are necessary for execution of work and leaving premise,clean and tidy complete all as specified and as directed. |
| 115 | M&L preparation of newly plastered surfaces as in ceiling and applying two coats of oil bound distemper over a coat ofchalk whitingwith using of all fixtureswhich are necessary for execution of work and leaving premise,clean and tidy complete all as specified and as directed. |
| 116 | M&L Complete removal of existing treatment on walls complete all as specified and as directed. |
| 117 | M&L forDistempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, ofrequired shade and colour complete, as permanufacturer\"s specification. Two or more coatson new/old work over 3mm thick wall putty withwhite or tinted on walls complete all as specified and as directed. |
| 118 | M & Lfor Preparing of old/new plastered surfaces of stone/brick and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 119 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paintwith using of all fixtureswhich are necessary for execution of work and leaving premise,clean and tidy complete all as specified and as directed. |
| 120 | M&L for Preparing Old wood and wood based surfaces of any descriptionover 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 121 | M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying two coats of synthetic enamel paintover one coat of red oxide primercomplete all as specified and as directed. |
| 122 | Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 123 | S&F steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 124 | E/M PORTION : Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface as per site requirement complete all as specified and as directed. |
| 125 | Taking down existing unserviceable MCCB/main switch (any type and capacity) and making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed. |
| 126 | Taking down existing unserviceable distribution board with MCBs, switch fuse unit, enclosure and making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed. |
| 127 | Taking down Existing old unserviceable submain wiring of any description /type size and removal of UNSV material from site and making good the disturbed surface of walls / ceiling so asto match with the existing finishes complete all as specified and as directed. |
| 128 | M&L in replacement for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding subjected to IS 732, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, surface type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and as directed for following:- NOTE for Sl Item No 128 to 130 :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the PVC conduit & boxesto required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. In case the box needs to be put on surface, prior approval must be taken from the Engineer-in-charge and high impact ABS plastic boxes with minimum 1mm thickness shall be used instead of metal boxes.(ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A\".(iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.Note: Inspection elbows, inspection Tees, self locking saddle clips shall be used as accessories for laying conduits complete all as specified and as directed. |
| 129 | One light point controlled by one, 1 way switch complete all as specified and as directed. |
| 130 | One 3 pin 6 Amps socket point controlled by one switch on same board complete all as specified and as directed. |
| 131 | One 3 pin 6 Amps socket point controlled by one switch on independent board complete all as specified and as directed. |
| 132 | One ceiling fan/exhaust fan point controlled by one 1way switch complete all as specified and as directed. |
| 133 | One bell point controlled by one switch complete all as specified and as directed. |
| 134 | One light point controlled by two two way switches complete all as specified and as directed. |
| 135 | All as per item No. 128 here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and as directed. |
| 136 | All as per item No. 128 here-in-before but with 4 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and as directed. |
| 137 | M&L in replacement for point wiring with 1.5 sq.mm FRLSH insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through existing PVC conduit/casing cappingof suitable size but not less than 20 mm dia in existing conduitetc allas per site requirement including FRLSH,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour codingand pressed steel terminal boxes made out of 1.6 mm thick MS sheet with sink into the wall for mounting including laminated sheet cover 3mm thick laminated hylam sheet fixed with cadmium plated screws/PVC gang box fully enclosed type for mounting switches,sockets,fan regulator, etcincluding all accessories and making good the disturbed surfacesof walls and paint touch up to match with the existing surfaces as per site requirement complete all as specified and as directed.Note: Inspection elbows, inspection Tees, self locking saddle clips shall be used as accessories for laying conduits as directed by the Engineer-in-charge. |
| 138 | One light point controlled by one, 1 way switch complete all as specified and as directed. |
| 139 | One 3 pin 6 Amps socket point controlled by one switch on same board complete all as specified and as directed. |
| 140 | One 3 pin 6 Amps socket point controlled by one switch on independent board complete all as specified and as directed. |
| 141 | One ceiling fan/exhaust fan point controlled by one 1way switch complete all as specified and as directed. |
| 142 | One bell point controlled by one switch complete all as specified and as directed. |
| 143 | All as per item No. 131.00 here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and as directed. |
| 144 | All as per item No. 131.00 here-in-before but with 4 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and as directed. |
| 145 | S&F modular metal flush box 3 module complete including any civil work required to make good the disturbed surface complete all as specified and as directed. |
| 146 | S&F modular metal flush box 4 module complete including any civil work required to make good the disturbed surface complete all as specified and as directed. |
| 147 | S&F modular metal flush box 8 module complete including any civil work required to make good the disturbed surface complete all as specified and as directed. |
| 148 | Supply and fixing of modular cover plate white with frame complete for3 module complete all as specified and as directed. |
| 149 | Supply and fixing of modular cover plate white with frame complete for4 module complete all as specified and as directed. |
| 150 | Supply and fixing of modular cover plate white with frame complete for8 module complete all as specified and as directed. |
| 151 | S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and as directed. |
| 152 | Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed. |
| 153 | Supply and fix modular switch 6 Amp, two way, 1 module, 230 volts AC circuit complete all as specified and as directed. |
| 154 | Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed. |
| 155 | Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed. |
| 156 | Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and as directed. |
| 157 | Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and as directed. |
| 158 | Supply and fix modular fan regulator 100 W 2 module complete all as specified and as directed. |
| 159 | S & F call bell, ding dong AC 230 Volt single pole complete all as specified and as directed. |
| 160 | S & F earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 voltswith and including one MCB, SP, 20A, 240 Volts as per complete all as specified and as directed. |
| 161 | S & F in replacement 20W LED batten tubelightsurface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface complete all as specified and as directed.Model: Crompton Linea Pro or similar. |
| 162 | S&F angular lamp holder PVC / Polycarbonate type with cord grip cap suitable for T type LED lamp fitting including LED bulb complete all as specified and as directed. |
| 163 | Supply and fix electric water heater, vertical storage typewith ferroglass coated anti-rust inner container and heating element upto 2 KW capacity 25 litre, heavy duty anode rod, preset thermal cutout, BEE 5 Star rated as per latest BEE norms (i.e. standing losses ≤ 0.465 kWh/24 hour/45°C which is only valid till 31st Dec 2025, material shall be supplied as per latest revision at the time of supply, complete with all accessories such as safety valve, thermostat, NRV, connection piece(hot and cold water connection pipe)etc complete all as specified and as directed.Model: Havells Monza DX or similar |
| 164 | Supply and fix stop valve of dia 20 mm with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and as directed. |
| 165 | Supply and fix bib tap of dia 20 mm cast iron alloy with crutch or butterfly handle screwd for iron pipe to outlet pipe of geyser complete all as specified and as directed. |
| 166 | Supply and fix of any length CPVC pipe of dia 20 mm dia manufactured as per IS : 15778including connection sockets, elbow and brass tee for connecting pipes etc and connecting pipe to inlet and outlet of the geyser complete all as specified and as directed. |
| 167 | Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection, water pipes and reassembling in all respects after replacing unserviceable parts/components and testing for proper working after repairs and refixing in the original place/position duly connecting up water supply and electric supply etc complete all as specified and as directed. Note :- Spare parts replaced shall be measured and paid separately under relevent items below.However labour cost of replacement is deemed to be included in the rate quoted. |
| 168 | Disconnecting and removingceiling fan of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly, lubricating with approved lubricants, reassembling, refixing in original position includingminor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc & testing complete all as specified and as directed. |
| 169 | S & Fsheet metal enclosure powder painted for VTPN DB 04 way double door with IP-42 protectionwith Din rail and busbar complete all as specified and as directed. |
| 170 | S & Fsheet metal enclosure powder painted for MCB DB TPN04 way double door with IP-42 protectionwith Din rail and busbar complete all as specified and as directed. |
| 171 | S & Fsheet metal enclosure powder painted forMCB DB SPN08 way double door with IP-42 protectionwith Din rail and busbar complete all as specified and as directed. |
| 172 | Supply and fixing MCCB , 415V, 125 Amps in `C’ series having current rating 10 KA complete all as specified and as directed. |
| 173 | Supply and fixing MCB TPN, 40-100 Amps in `C’ series having current rating 10 KA complete all as specified and as directed. |
| 174 | S&F MCB single pole to neutral, 32 Ampsin `C’ series having current rating 10 KA complete all as specified and as directed. |
| 175 | S&F MCB single pole, 6 to 32 Ampsin `C’ series having current rating 10 KA complete all as specified and as directed. |
| 176 | M/L for Sub main wiring with 4 runs of PVC insulated unsheathedmulti stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulatedearth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiringand connecting up complete all as specified and as directed. Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length. |
| 177 | M/L for Sub main wiring with 4 runs of PVC insulated unsheathedmulti stranded single core copper conducter 04 Sqmm drawn through PVC conduit/casing capping including accessaries with 04 sqmm PVC insulatedearth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiringand connecting up complete all as specified and as directed. Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length. |
| 178 | M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified and as directed. Note: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’. |
| 179 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed. |
| 180 | M&L for cutting round holes suitable for fixing of exhaust fan/chimney pipe of size 150-300 mminto through stone walls built in cement mortar or cement lime mortar and making good in cementmortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and as directed. |
| 181 | S&F Reading lights with 3W, 240V AC, 4000K flexible reading lights complete all as specified and as directed. Make : Philips Model No. 30975 or equivalent. |
| 182 | S&F wall light, 23W, body colour white complete all as specified and as directed. Make : Model Philips comet or equivalent. |
| 183 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable pipe for fitting to surface ,no of nuts, bolts and clamps complete all as specified and as directed. |
| 184 | Supply and fixingin replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 240 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 185 | S&F Ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, BLDC,with out regulator power consumption not to exceed 40W, BEE 3 star rated as per latest BEE norms including taking down the existing unserviceablefan and depositing it to MES E/M Store complete all as specified and as directed.Make : Model: Havells ES40/ Bajaj Sabse Tezz/similar |
| 186 | Supply and fixing in replacement Deep recessed downlights, 18Watt, aluminium construction EMC/EMI compliant, Ripple<5% flicker free driver,including connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light to roof surface all as specified and directed. Make : Model No. Havells VIBEFLRDDLR18WLED840S or similar. |
| 187 | Supply only the following parts in replacement of water heater (Electric Geyser) storage type of given make and size complete all as specified and as directed :- |
| 188 | Thermostat ISI marked suitable for 25/50 litre capacity. Make - sphare hot /bajaj/ditz/picco/usha /racold . |
| 189 | Heating element ISI marked 2000 watt push/thread type circular /triangular base suitable for any make and size. Make - bajaj / Racold |
| 190 | Indicator bulb 240 V suitable for givenmake, typeand model |
| 191 | Base plate suitable for existing geyser |
| 192 | Tank suitable for existing geyser |
| 193 | Supply & fixing in replacement ofhigh efficacy recess luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extruded diffuser giving glare free lightand good aesthetic appeal 35/36 W LED (2ft X 2ft) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. |
| 194 | S&F WALLY Suitable for wall surface mounting light PC Base/Arm Cup with PP Diffuser, Lamp Shade white, Finish-PU Paint, B22 Lamp holder complete all as specified and as directed. Make : Wipro Cat Part No WL-WALLY-B22 or equivalent in Bajaj / Havells / Surya. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
