Tender For Addition Alteration And Special Repair To Certain Offers Jcos Or Md Accommodation At Bareilly., Bareilly-Uttar Pradesh

TDR : 52414315

Tender Notice
Corrigendum Details
BOQ

14 Days Left

Bareilly , Uttar Pradesh

Tender Brief : Corrigendum : Tender For Addition Alteration And Special Repair To Certain Offers Jcos Or Md Accommodation At Bareilly.

Document Fees
₹ 3000 /-

EMD
₹ 786400.0 /-

Tender Value
₹ 9.22 Crore /-

Submission Date
03-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	18-12-2025	Amendment to date 18.12.25	Date	03-01-2026
2	12-12-2025	Amendment to date 12.12.25	Date	27-12-2025
3	08-12-2025	Amendment to date 08.12.25	Date	20-12-2025

Name of Work: ADDN/ ALTN AND SPL REPAIR TO CERTAIN OFFRS/ JCOs/ Ors MD ACCN AT BAREILLY UNDER GE (WEST) BAREILLY

Sl. No.	Item Description
1	BLDG Work
2	Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove complete all as specified and directed by Engr-in-Charge.
3	M & L fornon-skid ceremic colouredtiles7 to 8 mm thick(Square/rectangular) areaof each tile exceeding0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointedin neat cementslurry and pointed in whiteor colouredcement to match of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes incl dismantling of existing tiles complete all as specified and as directed by Engr-in Charge.
4	All as per serial item No 3 as above but as in vertical surfaces of tiles and rendering 10 mm thick in cement mortar 1:4, including dismantling as in backing layer complete all as specified and as directed by Engr-in Charge
5	M & L for non- skid ceremic colouredtiles7 to 8 mm thick(Square / rectangular) areaof each tile exceeding0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointedin neat cementslurry and pointed in whiteor colouredcement to match incl dismantling of tilesand screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishesall as specified and as directed by Engr-in Charge
6	M&L for Vitrified double charged coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm andnot exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and with 15mm thick screed bed 1:6 cement motar including dismantling of floor tiles and hearting complete all as specified and and as directed by Engr-in Charge
7	All as per serial item 06 as above but as in vertical surfaces including dismantling of tiles and rendering 10 mm thickin cement mortar 1:4, as in backing layer complete all as specified and as directed by Engr-in Charge
8	M&L for Glazed (plain /coloured) ceramic tiles wall 600 mm x 300 x 7 mm thick on vertical faces of walls including 10 mm thick rendeingin CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified and as directed by Engr-in Charge
9	M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and as directed by Engr-in Charge.
10	M & L for Post Construction Anti TermiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and and as directed by Engr-in Charge
11	Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all asspecifiedand as directed by Engr-in Charge.
12	Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 Sqm each and not exc. 4.00 Sqm including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all asspecifiedand and as directed by Engr-in Charge.
13	Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete as specified by the manufacturer and as per directions of Engineer-in-charge.
14	Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.
15	S&F for 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filingand inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1, necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface all as specifiedand and as directed by Engr-in Charge
16	S&F for 105x60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filing andinner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surfacecomplete all as specified and as directed by Engr-in Charge
17	S&F for 35 mm thick Factory made flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified and as directed by Engr-in Charge.
18	M & L for 35mm thick Factory made plain framed glazed and skeleton shutter open rebated& prepared to receive glass, gauge etc, with sash bar edges of framingplain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - ISection 8 clause 8.24 (a) fitted to chowkats all as specified and directed.Note:- Campsule Mess will be measured and paid separately.
19	S&F for 20 mm thick solid PVC board, both side prelaminated, one side with decorative choice lamination, and other side plain rigid white lamination as in cup board shutters, with wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified and directed.Note:1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) thickness of laminated not less than 0.25mm for inside rigid white type & 0.12 (14 micron)mm for outer decorative type. The laminate shall be fixed to base with approved adhesive as per manufacturer\"s instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets. 3) Frame to be fixed to walls, soffits & base of cupboard with fasterners.
20	S&F for 18 mm thick solid PVC board, both side prelaminated, one side with decorative choice lamination, and other side plain rigid white lamination as in cupboard shelves & partitionsincluding powder coated aluminium cleat (colour of powder coated to match colour / shade of laminate) and as in fixing to sides of cupboard, soffits & base of cupboard with SS fastner also including PVC lipping on all exposed edges of same texture & shade to match the laminate complete all as specified as directed. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE.2) Thickness of laminated not less than 1mm for inside plain white type. The laminate shall be fixed to base with approved adhesiveas per manufacturer\"sinstructions and machine pressed to ensure proper bonding with base ply and avoid air pockets .
21	S&F for 16 mm thick solid PVC board, one side prelaminated and other plain white lamination, fixed on back side of wall of cup board with SS fastners complete all as specified and as directed by Engr-in Charge
22	S&F for selected quality modular type stainless steel hydraulic concealed hinges.
23	S&F for fancy type 200 mm long stainless steel handles etc, complete all as specified and directed
24	S&F for 100mm long stainless steel butt hinges complete all as specified and directed.
25	S&F for 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed.
26	S&F for 150mm long aluminum handles, cast type complete all as specifiedand as directed by Engr-in Charge
27	S&F for 200mm long aluminum anodised, barrel tower bolts of extruded section and fixed.
28	S&F for 150mm long Extruded aluminium alloy handles, fabricated type, anodised.
29	S&F 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring fixed in floor complete all as specified andas directed by Engr-in Charge
30	S&F for 300mm longaluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as spd and as directed by Engr-in Charge
31	S&F for 1.2mm thick aluminum anodised campsule mesh aperture not more than 1 cm fixing with screw in the door for protection of mosquito wire mesh and all as spd and as directed by Engr-in Charge
32	S&F galvanised Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and as directed by Engr-in Charge.
33	S&F 300 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate complete including fixed to wooden and steel chowkats.
34	M&L Preparation of oldwooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint.
35	M&L painting to wood and wood based surfaces of any description exc 10cm with or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of newly or previously untreated surface all as spd and as directed by Engr-in Charge
36	M & L preparation of old steel surfaces of any description over 10 cm inwidth or girth and applying one coat of synthetic enamel paint all as spd and as directed by Engr-in Charge.
37	M&L forpainting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spdand as directed by Engr-in Charge.
38	M & L for Plain Cement Concrete 1:3:6type C-1(using 20 mm graded aggregate) as in bed blocks for hold fast/concrete filling in chowkhats and similar work etc complete all as specified and directed by Engr-in Charge.
39	M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) using WPC@ 3% per 50 kg of cement including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding all as spd and directed,Note :- WPC shall not be paid separately for this item.
40	M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4)using WPC@ 3% per 50 kg of cement newly surface even and smooth without using extra cement and necessary scaffolding all as spd and directed by Engr-in ChargeNote :- WPC shall not be paid separately for this item.
41	M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding all as spd and directedby Engr-in Charge.
42	M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6)newly surface even and smooth without using extra cement and necessary scaffolding all as spd and directed by Engr-in Charge.
43	M & L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished including taking down plaster the surface even and smooth withoutusing extra cement and necessary scaffolding complete all as spd and directed by Engr-in Charge.
44	M & L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) newly surface even and smooth without using extra cement and necessary scaffolding all as spd and directed by Engr-in Charge
45	M&L white washing three coats on ceiling surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding all as spd and directed by Engr-in Charge.
46	M&L Preparation of old decorated surfaces and applying three coat of white wash on ceilings surfaces and rubbing down with sand paper to have even and smooth surfacesall as specified & directed by Engr-in-Charge.
47	M&L for applying 2.0 mm thick layer of wall care putty on external and internal wall surfacesincl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed by Engr-in Charge.
48	M & L applying two coat of distemper oil emulsion white or tinted on old decorated or undecorated wall surface including preparation ofsurfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and as directed by Engr-in Charge.
49	M & L applying two coat of distemper oil emulsion white or tinted on newly decorated or undecorated wall surface including preparation ofsurfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and as directed by Engr-in Charge
50	M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls / roofprojections including facia,cornices etc one coat of primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose lengthof 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and accessories for applying Primer, should be able to spray in hard to reach areas and penetration of Primer, on the surface to achieve excllent application using limited manpower at any hight upto 10m with necessary scafolding and safety measure are inclusive in the rates complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
51	M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finishapplied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying exterior weather proof paint, should be able to spray in hard to reach areas and penetration of exterior weather proof paint on the surface to achieve excellent application using limited manpower at any hight upto 10m with necessary scafolding and safety measure are inclusive in the rates complete all as specified and directed by Engr-in Charge.
52	Demolition of brick work or stone/boulder masonry built in cement mortar or cement limemortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directedby Engr-in Charge.
53	M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as spd and directed and as directed by Engr-in Charge.
54	M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) all as spd and directed by Engr-in Charge.
55	M&L Brickwork old size with subclass‘B’ bricks, except brick straight orcurved on plan exc 6mmeanradius built in in CM (1:6) all as spd andas directed and as directed by Engr-in Charge.
56	M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges ofsunshades, shelves, lintels, Chajja ( up to IIIrd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed by Engr-in Charge.
57	Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case similar work carefully and matching to adjoining disturbed surfaces all as directed by Engr-in Charge.
58	Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided for.
59	M & L form work to edges of concrete rough finished surface flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide.
60	Form work to soffits of suspended slabs flat surface of concrete finishedrough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed by Engr-in Charge.
61	M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified by Engr-in Charge.
62	M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified by Engr-in Charge.
63	M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified by Engr-in Charge.
64	S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.
65	S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia.
66	M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc.all as specified and directed by Engr-in Charge.
67	M&L RCC type B 1, 1:2:4 (20mm graded agg) as in beams, cantilevers, lintels, over 1.5 m span.
68	M&L RCC type B 1, 1:2:4 (20mm graded agg) as in columns, pillars, piers, posts and struts.
69	M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in chajjas and like all as specified and directed by Engr-in Charge.
70	Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical, apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx 50 mm (10 mm gauge welded mesh ) & tack , securing with clips / linding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @ 200 ml every 50 kg of cement and applying two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for thesurfaces completeall as spd as directed. Water proofing Compound :-Dr Fixit (Pidiproof LW+ or pidicrete URP).
71	Demolition of cement concrete(un-reinforced), in any position and paving n.exc. 15 cm thickness (below or above ground level) including tile/ terrazzo floor complete all as specified and directed.
72	M & L for plain cement concrete 1:3:6typeC-1(using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair including forming 10 mm wide joints at not exceeding 3 m distance between adjoining slabs shall not exceed 10 mm in thickness and shall be filled with bitumen mastic i.e. bitumen and sand in proportion 1:2 all as specified or as directed.
73	Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidiproof LW+ or equivalent per sqm in each coat with roller application.(Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.)
74	Supply only liquid waterproofing compound all as specified. Make : Dr. Fixit (pidiproof LW+)
75	M&L for cement concrete type E2 1:5:10 (40 mm graded aggregate) as in mass concrete
76	S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.
77	M&L for plain cemet concrete 1:2:4 nominal mixed, type B0 using 12.5 mm graded aggregate as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc all as specified and directed.
78	M&L for 15 mm thick rendering on fair faces of concrete surfaces in CM 1:4 with water proofing compound concrete surface complete all as specified and directed.(NOTE:- WPC shall be measured and paid separatly)
79	Dismantling of roof terracing cement / brickconcrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified.
80	M&L 25mm thick cement concrete type B1 1:2:4 using 20mm graded stone aggregate in floor finishes even and fair to receive floor tiles.
81	(a) Supply and providing water proofing treatment with polyster based water waterproofing membrane standard water proofing membrane 3 mm thick, wt not less than 3.5 kg/ sqm having 10 years guarantee for water tightness all as specified and directed and described as under :
82	(b) Prepartionof RCCroof surface and applying one coat of polymer modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymer primer @ 0.30 Kg/Sqm including cleaningsurface, all as per manufacture\"s specification complete all as specifiedand directed.(c) Supply & Providing APP based polyster based water waterproofing membraneminimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced/ torch application of membrane with 10 cm overlaps as required thereof, complete all as specifiedor as directed.
83	M & L for applying one coats of Bitumen based UV reflective and water proofing paint with aluminium finish over APP membrane and maximum coverage 8.00 Sqm per litre per coat on non assessible roof over APP membrance complete all as specified.
84	M & Lfor heat reflective weathering tile minimum 250 x 250 x 15 mm thick, fixed withneat cement slurry overlaid over 15mm thick screed bed in cementmortar 1:4 on roof top and joints shall be 4mm wide, sealed with 2 mm deep polysulphide compound (sealing compound) complete all as specified and directed.
85	M&L for18-20mm thick Granite (Z- black/selected colour by GE) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. stone including grinding and polishing and 15mm screed bed in cement mortar 1:6 including dismantling of tiles, hearting etc complete all as specified.
86	M&L for18-20mm thick Granite (Z- black/selected colour by GE) machine cut and machine, polished,and moulding,window cills, riser of steps and urinal partition wash basin platforms and flooring, skirting/ dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed and dismantling of wall tile including cement mortar bedding complete all as spd and directed.
87	M & L for 18-20 mm thick machine cut pre polished kota stone slab flooring, steps incl treads / risers (in single piece) & skirting laid under stairs soffits area and jointed with grey cement slurry fixed with pigmentto match to shade of the slab including rubbing and mirror polishing over and or 20 mm thick bedding layer of cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
88	S&F 18-20 mm thick green marble (of any type) work (table rubbed and polished) in riser & steps , and like jointed in grey cement slurry and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed and making V-groove 5mm wide and 5mm deep in 3 nos on the tread in length wise 25mm centre to centre complete all as specified and directed.
89	Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and directed
90	S&F in repairs vitreous china wash down water closet single piece (Cascade pattern) with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x77CM / 66x35x71complete, including connection to drain pipe etc complete all as specified and directed.
91	S&F in repairs vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with \"P\"or \"S\" trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed.
92	S&Fin repairs PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.
93	S&F in repairs fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed.
94	S&F fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed.
95	S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed..
96	S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed..
97	S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts.
98	Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified or as directed.
99	Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified or as directed.
100	Refixing 15mm dia old steel tubing and connections in new or old position(Walls,ceiling, floors, etc.)
101	Refixing 20mm dia old steel tubing and connections in new or old position(Walls,ceiling, floors, etc.)
102	S&F for 15mm bore galvanised steel water tubing with all fittings \"medium grade\" and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed.
103	S&F for 20mm bore galvanised steel water tubing with all fittings \"medium grade\" and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed.
104	S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x160mm etc complete all as specified and as directed .
105	S&F in repairs stainless steel kitchen sink with double bowl without drain board made of 1 mm thick 304 grade stainless steel with plugs washers and waste pipe and coupling, round stainer including bedding in cement mortar on dwarf walls including brackets and connecting union to pipe complete.
106	S&F in repairs 75 mm x 32 mm dia chromium plated waste fitting special size suitable for stainless steel sinks including PVC flexible waste pipe of approvedquality complete all as specified and directed.
107	S&F in repairs stainless steel gratings 100x100mm selected quality complete all as specified and directed.
108	S&F in repair fancy type stainless steel towel rack size 600mm long including a pair of brass bracket complete all as specified and directed.
109	S & F stainless steel plate rack not less than 5 Kg of size 31\"X36\"X10\" complete all as specified and as dirrected.
110	S&Fin repairs Vitreous China table/counter top wash basin of suitable sizeincluding SSbottle trap, and cabinet of PVC shutter fixing on counter with SS waste couplingcomplete all as specified and as directed.
111	S&F Vitreous chinaware coloured wash hand basin with padestal of size 55X40X82cm complete including CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.
112	S&F fancy type brass chromium plated toilet paper holder, complete all as specified and as directed.
113	S & Fin repairs fancy type 150mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.
114	S&Fin repairs brass chromium platedwall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls incl necessary fitting complete all as specified and as directed..
115	S&FBrass chromium platedwall mixer 2 in 1, 15mm for mixing hot & cold water incl provision of over head shower, screwed down three joints to steel pipes or unions and plugging and screwed to walls incl necessary fitting complete all as specified and directed.
116	S&Ffancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes incl necessary fitting complete all as specified and as directed.
117	S&F in repairs health faucet 1 mtr SS Braided connection tube with wall hook complete for ETWC incl necessary fitting complete all as specified and directed.
118	S & F magnet catch with striking plate including letting in complete all specified and as directed.
119	S&F stainless steel of AE- SI 316 grade tubular towel ring including a pair of CP brass bracket complete & necessary fitting all as specified and directed.
120	S&F in repairs health faucet 1 mtr SS Braided connection tube with wall hook complete for ETWC incl necessary fitting complete all as specified and directed.
121	S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed.
122	S & F Brass CP Hand Shower with 15mm dia 1.2 Meter long flexible tube and wall hookscrewecd for iron pipe fancy type long body complete all as specified and directed.
123	S&F in repairs designed looking mirror area exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CPplugs with chromium plated brass screws and cup washers, complete all as specified and as directed.
124	S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.
125	S&F PVC corner set of three of size (12\"X12\" ,9\"X9\" and6\" X6\" ) with railling and complete all as specified and directed.
126	S&Ffancy type single lever deck mount 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe including taking out existing mixer from old WHB complete all as specified and directed.
127	S&Ffancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixedall as specified and directed.
128	S/F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls.
129	S&F inrepairs stainles steel Curtain Rod 25 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod all as directed and specified.
130	Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed.
131	Dismantling water tanks and removing to store capacity exc 500 and not exc.1000 litres complete all as specified and directed.
132	S & F 500 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part IMake :- Vactus/ Sintex/Rotax.
133	S&F Rotational moulded polyethylenetriple layered water storage tanks of 1000 Litre capacity white in colour (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I
134	S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all asspecified or as directed.
135	S&Fin repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all asspecified or as directed.
136	S&F Mild steel OHT cage, cooler stand, bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 all as spd and directed.
137	Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc.
138	S & F PVC (SWR) 110 mm diasoil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall all as specified or as directed.
139	S & FPVC (SWR) 110 mmbore bends all as specified or as directed.
140	S&F in repairPVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed.
141	S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fitting complete all as specified and as directed.
142	S & F in repairs spun iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls incl necessary bends , branch pieces, traps, required fittings complete all as specified and as directed by Engr-in Charge.
143	S&F in repairs PVC 100mm bore Y-Junction piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door complete all as sepecified and as directed by Engr-in Charge.
144	S&F PVC 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door complete all as specified and as directed by Engr-in Charge.
145	S&F PVC 75 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door complete all as specified and as directed by Engr-in Charge.
146	S&F 100mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and as directed by Engr-in Charge.
147	S&F 75mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and as directed by Engr-in Charge.
148	S&F 75 mm bore PVC cowl complete all as specified and as directed by Engr-in Charge.
149	S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three trackswith stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick figured glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clipsa, frame made with aluminium section as appended below-(i) Window frame :68.4x38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. Note : Rate for glass and wire shall not be paid separately.
150	S & Fforstainlesssteel glossy finish hat peg set of five tier with necessary fitting complete all as specified andas directed by Engr-in Charge.
151	M&L for 100x100mm Stainless steel floor trap Anti cock roach proof Trap complete all asspecified or as directedby Engr-in Charge.
152	S&F aluminium power coated (colour) section as in kitchen cabinet/ cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on edging window,ventilator,glazed with aluminium shutter(medium weght) of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xpm jalli and necessary fittingd,screws, plugs for fixing screws, etc complete all as specified and directed by EIC. Weight of section should not less than 0.55kg per RM.Note :Cost of rubber beading and required accessaries will be covered in the item and will be not paid extra..
153	M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination work complete all as specified and directedby Engr-in Charge.
154	M&L for Improved cupboard (Kitchen cabinet) made of 18mm thick prelaminated PVC board exterior gradewirh one side decorative lamination glossy finish & other side plain white in shelves, side back and doors including PBV Liping on all exposed edges of same texture & shade to match tht of laminat, fitted with selected quality improved type stainless steel hydraulic concealed hinges of (Make Hettich cat No ONSYS 4447i product code 928143200/ Kaff nickel SC hinges 100 code No KHSC-0/Godrej product code 6933, Baan code LKYAHCHR4) fancy type 200mm long stainless steel handles etc complete all as specified and directed. Note - Area shall be measuered flat on face of the cupboard 1, Design & layout of cabinaet and pattern/ colour of laminate shall be as approved by GE.
155	M&L for stainless steel (AISI 304 Grade ) Non magnetic multilayer nikle chrome plated for multipurpose utensil container including frame work telecscopic channels, handles etc as reqd and complete all as specified and as dircted utensil sample, design and pattern of each basket to be approvedby GE the foloowing size in each kitchen. (a) plain basket 510x470x100mm or 520x485x100mm or 530x505x150mm slace godrej code 6126 Baan code LKY2PB 2014 -Evershine size 520x485x90mm of 03 nos (b)multisize plate basket of size 510x470x150mm or 520x485x150mm or 436x500x200mm (Clear depth 500mm) 02 nos make Silk Elnora BAAN code LKY-3CS214- Ever shine size 520x485x90mm approved by GE
156	(c)Cutlery Basket, with Perforated bottom and side of compacted -slots for holding cutlery of size 510x470x100mm or 520x485x100mm or 144x468x50 (Clear dpth of 500mm) 02 nos make Silk Elenora (Asian Paint) code 600, size 530x505x100mm (GodrejProduct code 6134 BAAN Code LKY2PC214/Ever shine size 520x485x95mm (d)Plain basket of size 510x470x200mm or 520x485x200mm or 486x500x200mm 02 Nos make Silk Elenora (Asian Paint) code 600, size 53x505x200mm- Godrej product code 6128 BAAN code LKY 2PB218- Evershine size 520x485x180mm (e) pull out with 2 basket each of size 150x485x80mm or 100x485x80mm01 Nos make Sleek Elenora (Asian Paint ) code 250 size 180x500x590mm / Godrej product code 6141 baan code LKYNS2SP6/Ever shine size 610x485x90mm(f)dust bin as reqd 01 NosMake 200 series of Hettich
157	S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directedby Engr-in Charge.
158	S&F sheet glass 5.5mm thickordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane all as spd & directedby Engr-in Charge.
159	S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade Fe-410 gde st- 240 complete all as specified and directedby Engr-in Charge.
160	M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directedby Engr-in Charge.
161	M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directedby Engr-in Charge.
162	M&L Excavating in post holes (orsimilar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earthor broken rubble mixed withearth around, in layers notexceeding 25 cm, complete all as specified and as directedby Engr-in Charge.
163	S&Ffor providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete,incl fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of existing MS/RCC railing complete all as specifed and directedby Engr-in Charge.
164	S&F for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 75mm dia pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directedby Engr-in Charge.
165	S&F for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100mm dia pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directedby Engr-in Charge.
166	S&F for 3.15mm dia magic eyes for looking out side from main of door and for safety pupose only complete all as specified and directedby Engr-in Charge.
167	M&L for 25mm thick cement concrete 1:2:4 type B2 (using 20mm graded aggregate) for levelling of sub base of flooring complete all as specified and directedby Engr-in Charge.
168	S&F for computerised reflective letter / bldg number on ACP sheet (size 45 cm x 45 cm) and fixing with 04 nos of screw, rawal plug etc on wall in front of building complete all as specified and directedby Engr-in Charge.
169	M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cmdeep and getting out complete all as specified and directedby Engr-in Charge.
170	Dismatling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified and directedby Engr-in Charge.
171	M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone agg in sub base flooring complete all as specified & directed by Engr-in Charge.
172	M&L for chequered cement concrete tiles 20cm x 20cm x 20mm thick with grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors complete all specified and directed by Engr-in Charge.
173	M&Lfor PCC kerb stone providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete (Approx Size 300x300x100mm or as per site requirement) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete incl form work weathering, slightly rounded or chamfered angles and throating all as specifed and directed by Engr-in Charge.
174	M&L for Machine pressed precast conctete interlocking paver block with gray cement and pigment or selected coloured or pattern any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Gradeover 25mm thick sand cushioning including spreading and levelling complete all specified and directed by Engr-in Charge.
175	Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in sof/loose soil complete all as specified and directed by Engr-in Charge.
176	Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified.
177	Removing excavated Soil material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in Charge.
178	PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed of NP-2 drain pipe 150 mm bore including packing under and completely surrounding the pipes after they are laid and tested complete all as specified and directed by Engr-in Charge.
179	M & L 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laidin trenches and jointes complete as specfified and as directed by Engr-in Charge.
180	M&L for cement concrete type D2 (1:4:8) (using 40 mm graded stone aggregate) in foundations filling and mass concrete complete as specfified and as directed by Engr-in Charge.
181	M&L for brick work in burnt brick with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specifiedand as directed by Engr-in Charge.
182	M/L PCC 1:2:4 type B1 using 20mm traded stone aggregate as inCoping /benching including necessary form work and finishing all exposed surfaces of concretecomplete as specfified and as directed by Engr-in Charge.
183	Providing and fixing SFRC (Steel Fibre Reinforced Concrete) cover and frame(heavy duty HD-20 grade designation) 560 mm internal diameter conforming to IS-12592, total weight of cover and frame to each be not less than 182 Kg, fixed in cement concrete 1: 2:4complete as specfified and as directed by Engr-in Charge. .
184	Providing orange colour safety foot rest minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dai steel bar conforming to IS : 1786 having minimum cross section as 23mmx 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2 mm tread on top surface by ribbing or chequerering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacturer\"s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.
185	15mm thick cement plaster mortar in cement and sand mortar (1:3) on faces of brick work or concrete surface mixed with water proofing compound as per manufacturer\"s instructions, surface finished even and smooth without using extra cement (WPC shalll be measured and paid for separately)complete as specfified and as directed by Engr-in Charge.
186	Supply only integral water proofing compound ISI markedcomplete as specfified and as directed by Engr-in Charge.
187	Cutting into existing manholes for connecting new drains internal dia of 150 mm bore NP-2 pipes, making good to pipe and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished complete all as specified and directed.
188	M&L for Reinfoced Cement Concrete in nominal mixType B0 1:2:4 (12.5mm graded aggregate) as in cover slabs supported to wallsfor Manhole to fixing of SFRC cover Heavy duty HD-20 grade designation) etccomplete as specfified and as directed by Engr-in Charge.
189	Demolition and breaking up drain pipes of 150 mm dia(Salt glazed ware, AC orReinforced concrete) setin cement mortarcomplete as specfified and as directed by Engr-in Charge.
190	M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate for surface channels, bed of drains incl forms/ moulds etc complete as specfified and as directed by Engr-in Charge.
191	Extra for forming fair finished to drain or channel, 30 cm inner girth or above , in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed
192	Add or deduct for each 25 mm girth or partthereof over or under 30cm ditto etc complete all as specified and directed directed by Engr-in Charge.
193	M&L 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:4) finishing the surface even and smooth without using extra cement and necessary scaffolding all as spd and as directedby Engr-in Charge.
194	M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate as in surface channels and drains including rounded or chamferred on edges etc all as specified and as directedby Engr-in Charge.
195	Dismantling fencing wire mesh any type complete all as specified and as directedby Engr-in Charge.
196	Dismantling posts and struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and as directedby Engr-in Charge.
197	M&L cement concrete 1:3:6 type C 2, ( using 40 mm graded stone aggregate) as in foundation in filling and mass concrete complete all as specified and directed.
198	S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, wind ties, etc.; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as directed.
199	Supply only chain link fencing any size or type complete all as specified and directed.
200	Fixing only chain link fencing including line wire, any mesh size and shape and type of any standard rails, straning bolts etc encluding provison of binding wire etc complete all as specified and directed.
201	MS screw bolts with hexagonal or square heads at one end and screwed the other, or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long 10 mm dia of bolts and nuts complete all as specified and directed.
202	M&L two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces complete all as specified
203	M&L PCC 1:4:8 type D2 ( using 40mm graded crushed stone aggregate) as in Fdn filling and mass concrete all as specified.
204	Brick work in CM (1:6) with sub class \"B\" bricks built in one brick thick with old bricks straight or curved on plain surfaces all as specified.
205	M&L for framed work as in doors or ornamental and intricate design gates of angle or other section with gusset plates, rails, braces, including pintal etc. complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.
206	E/M Work
207	Supply, laying & testing of LT Cable XLPE insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts, grade cross setional area of 25 Sqmm 4 Core Sizes complete all as specified and as directedby Engr-in Charge.
208	Supply, laying & testing of LT Cable XLPE insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts, grade cross setional area of 35 Sqmm3.5 Core Sizes completeall as specified and as directedby Engr-in Charge.
209	M&L for sand cushioning laid in trenches for laying of LT UG cables completeall as specified and as directedby Engr-in Charge.
210	M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protectioncomplete all as spd and directed.
211	S&F GI tubes light grade of dia 80 mm with all fitting and fixed complete for protection of LT UG Cables laidto walls or in floors or along with poles etc completeall as specified and as directedby Engr-in Charge.
212	M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at adepth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 20mm dia GI pipe ofmedium grade for watering and15mm dia GI pipe of light grade for protection of earthing lead ,wiremesh, funnel, charcoal dust,common salt,copper lugs etc completeall as specified and as directedby Engr-in Charge.
213	Taking down carefully serviceconnections of any description from pole, wallor service brackets etc including making good disturbed surface to match with the existing surface completeall as specified and as directedby Engr-in Charge.
214	Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets,lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc completeall as specified and as directedby Engr-in Charge.
215	Drawing out old sub main copper/aluminium cable off various sizes from existing conduit/ batten complete all as specified and as directedby Engr-in Charge.
216	Taking down old MCB DBs/ main switches of anysize and capacity complete all as specified and directed.
217	M&L for wiring with and includingmulti stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit not less thanof 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories andalso suitable for modular switches and sockets and cover platate& including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number ascontinuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed for the following :-
218	(a)One light/fan point controlled by one switch
219	(b)One 3 pin, 5 Amps, socket outlet on the same board, controlled by another switch.
220	(c)One multi pin socket outlet, 5 Amps, on Independent board.
221	(d) One point controlled by bell push
222	M&L for wiring with and includingmulti stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduitnot less than of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories andalso suitable for modular switches and sockets and cover platate & including with multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number ascontinuity earth wire terminating with new sunken concealed terminal boxescomplete all as specified and directed.
223	S & F Modular switch one way 6 A, 1 Module complete all as specified and directed by the Engr-in-Charge.
224	S & F Modular switch one way 16 A, 1 Module complete all as specified and directed by the Engr-in-Charge.
225	S & FModular bell push 6 Amp, 1 Module complete all as specified and directed by the Engr-in-Charge.
226	S & FModular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge.
227	S & FModular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge.
228	S & FModular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed by the Engr-in-Charge.
229	M & L for replacement oflamp holder, PVC / Poly carbonate, insulated bodymodular type with back plate batten/angle type for batten fittings complete all as specified and directed by Engr-in-Charge.
230	S &FLED Lamp 7 Watt suitable for batten fittings complete all as specified and directed by Engr-in-Charge.
231	S&F call bell complete all as specified and directed by Engr-in-Charge.
232	S&F TV socketout let singlecomplete all as specified and directed by Engr-in-Charge.
233	S&F, in repairs, sheet metal distribution board, SPN, 12 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed.
234	S&F, in repairs, sheet metal distribution board, SPN, 8 way 240 Volt,Double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed by Engr-in-Charge.
235	S&F, in repairs, miniature circuit breakers, type curve‘B’ , 10 KA, SP, 6 to 32 Amps complete all as specified and directed by Engr-in-Charge.
236	S&F, in repair, miniature circuit breakers, SPN, type curve‘C’ 10KA, 40 Amps, 240 Volts.complete all as specified and directed by Engr-in-Charge.
237	S&F, in repairs, LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 20 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed by Engr-in-Charge.
238	S&F, in repairs, LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 10 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed by Engr-in-Charge.
239	Supply and Fix in repairs PVC Deco type round light incl LED lamp 7 watt complete all as specified and directed by Engr-in-Charge.
240	S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed by Engr-in-Charge.
241	S&F indoor decorative LED City-3 light fitting suitable for & including single 12 Watt LED lamp with polycarbonate body with upper globe complete all as specified and directed.
242	Supply and Fix in repair Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. for fixing in wall of suitable size and length of bracket not less than 1.2 mtr complete all as specified and directed.Note:-Cost of bracket,clamps and nut bolts included in quoted rate.
243	Taking down Ceiling Fan of any size and place in safe custody by the contractorcomplete all as specified .(Note :-Old Fans of any Capacity deposited to MES store yard for BER board).
244	S&F, in repairs, sub-main wiring with 2 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded,4 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.
245	S&F, in repairs, sub-main wiring with 2 single core, 10 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 10.0 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.
246	S&F, in repairs, sub-main wiring with 2 single core, 6 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 6 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.
247	S &F sheet metal enclouser with socket plug top andMCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directedby Engr-in-Charge.
248	Supply and fixing with brushless direct current motor (BLDC) ceiling fans complete with blades, down rods,electric fan regulator and accessories,, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE.28 W, Five star rated with brushless direct current motor with squirrel case induction motorcomplete all as specified and directed by Engr-in-Charge.
249	Supply, installing, testing and commissioning exhaust fans PVC body 250 mm sweep, 230 volt, AC, 50 Hz, 1200 RPM single phase complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc complete all as specified and directed by Engr-in-Charge.
250	Supply and fixed Rigit non-metallic PVC conduit of external dia 40mm exclusive of boxes (Junction/terminal) but inclusive of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts saddles pipe hooks etc complete all as specified nd directed by Engr-in-Charge.
251	Supply and fixed Rigit non-metallic PVC conduit of external dia 25mm exclusive of boxes (Junction/terminal) but inclusive of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts saddles pipe hooks etc complete all as specified nd directed by Engr-in-Charge.
252	Supply and fixed Junction boxes(1 to 4 way) suitable for 40 mm pipe complete all as specified and directed by Engr-in-Charge.
253	Supply ,installation,testing and commissioning ofWater heater storage type, 5 star rating lectric,suitable for single phase 50Hz AC supply ,stainless steel inner assembly,2 KW heating element,twin thermostat for water temperature and sefety themostate stove enamel outer body including minimum 1 Mtr of three core 2.5 sqmm twisted copper conductor cable PVC Shaethed three pin plug top polyethylene pipeconnecting pipe 450 mm long of 6 KG Cm with two sets of chromium plated adopterat ends at hot water out let with safety fusible plug confirming to relevent IS of 25 ltrs capacity complete all as specified and directed by Engr-in-Charge.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Addition Alteration And Special Repair To Certain Offers Jcos Or Md Accommodation At Bareilly., Bareilly-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Addition Alteration And Special Repair To Certain Offers Jcos Or Md Accommodation At Bareilly., Bareilly-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us