|
| 1 | NOTE: Schedule ‘A’ Part Ito IX are under Ser No. 2.00to 10.00. are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only. |
| 2 | Lump sum price worked outforBuilding / Structures as listed in Sch `A’ Part I. |
| 3 | Lump sum price worked outfor Excavation / Earthwork & Site Clearance as listed in Sch `A’ Part II |
| 4 | Lump sum price worked out for Internal Electrificationas listed in Sch `A’ Part III |
| 5 | Lump sum price worked out for Internal Water Supplyas listed in Sch `A’ Part IV |
| 6 | Lump sum price worked out for Summer Appliancesas listed in Sch `A’ Part V |
| 7 | Lump sum price worked out for External Electric Supplyas listed in Sch `A’ Part VI |
| 8 | Lump sum price worked out for External Water Supply as listed in Sch `A’Part VII |
| 9 | Lump sum price worked out for Road/ Path/ Culvert as listed in Sch `A’Part VIII |
| 10 | Lump sum price worked out for Sewage Disposal as listed in Sch `A’Part IX |
| 11 | SCHEDULE \"A\" PART - IX Misc Itemsis not prepriced by MES and prepriced rates indicates 0.0 under column 5 signified this fact only. Bidder shall insert their rates in Green filed under Col-6. |
| 12 | Supply and fix desert cooler electric driven (single phase) with overall dimension 760x1060x610mm having tank capacity 70 ltrs with fan of size 500mm, grass padded walls with motor arrangement for air circulation, motor should be ISI marked with variable speed (High 1400 rpm, Med 1300 rpm, low 1250rpm), efficiency of fan motor should be 40% with PF>_0.85 totally enclosed hour (or nearest size), should also include water pump of Head 5ft, input watt-20W, operating voltage-single phase, 220V, 50Hz, complete aall as directed. |
| 13 | Supply and fix Water heater storage type, electric, capacity 25 litres, BEE 5 star rated complete |
| 14 | Construction of valve pit chamber of size 1.2m x 1.2m x 1.0m (internal dimensions of the chamber including brick masonary with cement mortor (1:6) and rendering externally as the work proceeds 23cm thick wall complete with the following specification and as directed by Engineer-in-Charge :-(i)10mm thick plaster in CM (1:6) externally.(ii) PCC (1:3:6) type C-2 100mm thick in foundation.(iii) Flooring 40mm thick in PCC (1:2:4) type B1 over 75mm thick hard core of guage exc 63mm thick.(iv) Angle iron frame 40x40x6mm thick for cover and handle steel 3mm thick cover with interlocking arrangement handle and necessary hinges etc.(v) Two coats of synthetic enamel paint to cover internally and externally over a coat of red oxide primer. |
| 15 | Material and labour for dry tibba sand in trenches cushioning to under ground cable spreading, levelling hand punning complete all as specified and directed. Note :- Punned down thickness will be measured for payment purpose. |
| 16 | Supply and install, testing and commissioning of LT panel board outdoor cubicle type floor mounted3.15 mm thick CRCA sheet, weather proof to accommodate the following controls:-(a) MCCB 100 Amp, 36 kA,4 Pole - 1 Nos.(I/C )(b)MCCB 63 Amp, 25 kA,4 Pole - 2 Nos.(O/G )(c)CTs 500/ 5 ma - 1 Set of 3(d) .Digital Panel Meters Class 1with 3 Phase Voltage, Current Frequency, PF, KW,KVA,KVAR and kWh Make C&S Model CSM-A-M4-S3 - 1 No(e) Aluminium Busbar 400 Amp - 1 set of 4complete wiring of panel & Installation all as specified |
| 17 | S&F LT feeder pillar box factor made cubical type dust proof, out door type both side opening of size 100 x 80 x 40 cm of MS sheet 3.15 mm thick power coated machine pressed front opening with rubber gasket / bedding , locking arrangement with sliding bolt including aluminium bus bar of400 amps 4 strips mounted on insulators each strip should be munted minimum two insulator and nut bolt panel shall be mounted on angle iron frame and legs made from angle iron of suitable size duly spray painted internally and externally with two coat of synthetic enamel paint over a coat of red oxide primer grouted in PCC 1:2:4 type ‘B’ ( using 20 mm graded stone aggregate complete incoming / outgoing cable provision. |
| 18 | Boring of holes under road not less then 0.6mtr depth AND 90mm dia hole by trenchless mannual boring by using augar and laying of necessary GI pipe of suitable dia includingjointing and cable pulling all as specified. |
| 19 | S & F copper submersible cable 10 sq mm ,3 corefor connection of Pump to Panel. |
