Tender For Special Repair To Gd Post No P-149/ 06, 07, 08, 11 & 12 At Tech Area Of Army Avn Sqn (Spl Ops) Athaldwani Mil Stn Under Ge Ranikhet.; 1 Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). 2 M&L for 75mm thick cement concrete 1:3:6 type C-2 using20mm graded agg as in plinth protection incl all necessary form work & finishing surface even & smooth withoutusing extra cement complete all as specified and as directed. 3 M&L 75 mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and roughcomplete all as specified and as directed. 4 M&L chequered concrete concrete tile 30cm x 30cm x 25 mm thick with white cement & pigment, set, jointed and pointed in neat cement slurry in floors, laid over 15 mm thick bedding layer in Cement Mortar 1:6 complete all as specified and as directed. 5 M&L For Roof tiles, Mangalore pattern, interlocking at side joints on chhajja top, laid on 15mm thick screed bed or bedding in CM 1:4 complete. 6 Demolition of brick work built in cement mortar all as specified 7 Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. 8 M&L for brick work with sub class `B’ bricks, straight on plan to any radius in half brick thick walls, built in CM 1:4. 9 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete. 10 M & L for mild steel TMT bars ,6mmto 8 mm dia, cut to length , bent to shape required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90mm dia all a specified and directed 11 Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed. 12 Material & Labour 50mm thick (laid in two equal layer of 25 mm thick) inPCC 1:2:4 type B-0 (using 12.5mm graded crushed stoneaggregate)includingfinishing even and fairas in roof padding and prepare surface to receivetreatment complete all as specified and directed. 13 S & F 1.4mm dia galvanised steel wire netting 20mm X 20mmmesh size , madeup into matteresses or cages, lapped, wired and laid in position ,incl fixed with tinned tacks of wire staples complete all as specified. 14 Material & Labour for APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portionwith side lap not less 100mm and end lap not less than 150mmincl apply a tack coat of industrial bitumen completeall specified. 15 Material and labour for applyingatack coat of industrial bitumen 85/25
[email protected] Kg/Sqmover a coat ofbitumenprimer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified and directed. 16 M&L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed. 17 M&L for RCC 1:2:4 type B-1, Slab supported on walls,beams and columns in floors,roof, landing, balconies,in type B1(20mm graded aggregate). 18 Formwork to soffits of suspended slabs such as roof slab, floor slabs landings and sgh finished surfaces of concrete flat. 19 M&L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately) 20 M & L for mild steel TMT bars ,10mmdia and over , cut to length , bent to shape required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90mm dia all a specified and directed 21 M&L for 18 to 20mm thick Granite (of any type)work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed of 15 mm thick 1:6complete all as specified and directed by Engineer in charge. 22 Dismantling floor, hearth, wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises 23 M&L Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. 24 M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thickset and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified.. 25 M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. 26 M&L Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. 27 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed. 28 M&L for Mirror polished Kota Stone slab flooring 20-25 mm thick over cement screed bed 15mm thick 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. 29 M&L for Kota Stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed bed 10mm thick 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. 30 S&F in repair 600x 450mm beveled edge mirror or selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers. 31 M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. 32 Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed. 33 Taking up or down GI Water Tubing 20mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed. 34 Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. 35 Supply and Laying Steel Water Tubing 20mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. 36 S&F 15mm dia bib taps CP Brass with Capstanhead, screweddown, screwed for iron pipe of bore 15mm complete all as specified and directed. 37 S&F brass Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe complete . 38 S&F brass Chromium plated wall Mixer valve hot and cold screwed down for iron pipe complete . 39 S&F Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 40 S&F 20 mmtubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and directed. 41 Supply& Fixing Soap Dish CP Brass complete all as specified and directed. 42 S&F Peg Set of 3 with base plate Aluminium Powder Coatedcomplete all as specified and directed. 43 S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium platedbracket guard and SS railing 60cm longcomplete all as specified and as directed. 44 S&F in repair Stainless Steel Decorative tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed. 45 S&F in repair Vitreous China wash downwater closet pan (pedestal pattern), white (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging deviceetc.) complete all as specified and directed by Engineer-in-Charge 46 Supply & fixin repair Hand Shower (health faucet) CP Brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer)as approved by the GE. Make- Jaquar or equivalent 47 Supply & fixing PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. 48 Supply & Fixing vitreous china wash basin, white, flat back, size 450mm x 300mm, including brackets,PVC waste pipe 32mm dia,wastecoupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed. 49 S&F Vitreous China Urinal, Half stall type, including, urinal spreader, waste coupling and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe complete all as specified and as directed. 50 S&F PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed. 51 Dismantling of PVC / CI pipe 100mm dia jointed in cement mortar and taking out of trench if required complete all as specified. 52 Dismantling of PVC / CI pipe 75mm dia or less jointed in cement mortar and taking out of trench if required complete all as specified. 53 M&L for PVC (SWR) pipes 110 mm single socketed, in any length including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. 54 M&L for PVC (SWR) pipes 110 mm single socketed in any length including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed to walls complete all as specified and as directed. 55 M&L for PVC (SWR) pipes 75 mm single socketed in any length including necessary fittings like socket, bend, elbow, single/double tee etc in any lengthwith rubber ring joints, laid in trenches or in floor complete all as specified and as directed. 56 M&L for PVC (SWR) pipes 75 mm single socketed in any length including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed to walls complete all as specified and as directed. 57 S & F PVC (SWR) floor trap 75 mm, plain with grating including jointing with solventcement and making water tight as specified and as directed. 58 Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete. 59 Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete. 60 Supply & fixingSteel windows with side hung shutters including box type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and directed. 61 Supply & fixingSteel windows with side hung shutters including box type hinge with steel handle and steel peg stay, complete without glazing bars, dovetailed or weldedcomplete all as specified and directed. 62 S/FSheet glass 3mm thick, ordinary quality and glazing with oil putty in squaresn exceeding 0.5Sqm in each pane complete. 63 S&F as mild steel wire cloth, .45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple and around all beading complete all as specified and as directed 64 S&F framed work such as gate, grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work Con-forming to Fe 290 Gde E-165. 65 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ®Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 66 S&F Factory Made Single extruded WPC( wood polymer composite) solid plain flush door of 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100gms) having minium density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compresive strength 50N/mm2 modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water / moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body tredded star headed counter shunk SS screw, all as per direction of Engineer in charge.(SS Butt Hinges and necessary SS screw shall be includded). 67 S&F plain framed solid, st chowkhats and frames, wrought rebated on solid rounded or chamfered put together with glue pinned supplied and fixed 2nd class hard wood. 68 S&F35mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on bothe sides complete all as specified and as directed. 69 M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturers insturctions, complete all as specified. 70 S&F 35 mm thick glazed and skelton shutter open rebated and prepared to receive glass, gauge etc,(with out sash bars) edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.23(a) 2nd class hard wood (Shisham), 35mm thick shutter. complete all as specified and as directed. 71 S&F mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with alluminium staple and around all beading complete all as specified and as directed. 72 S&F powder coated Anodised aluminium frame for doors, windows ventilators, partition with one or more rebates including joining cleat for fixing etc. complete shall as specified. 73 Supply and fixingpowder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm and suitable aluminium anodised frame F/H section complete all as specified and directed. 74 Supply & fixingaluminium sheet powder coated of thickness not less than 5 mm thick to be in sealed as panel in aluminium door including fixingcomplete all as specified and directed. 75 S&Fdoor closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed. 76 S&F figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane 3mm thick glass. 77 S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 300 mm long complete all as specified and as directed. 78 S&F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed 79 S & F aluminium handle, cast type anodized 100mm size. 80 S & F aluminium handle, cast type anodized 150mm size. 81 S & F 150 mm long aluminium anodized barrel tower bolts of extruded section lcomplete all as specified and as directed. 82 S & F 200 mm long aluminium anodized barrel tower bolts of extruded section lcomplete all as specified and as directed. 83 Supply & fixing butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed. 84 Supply & fixing butt hinges medium weight cold rolled mild steel of 125 mm long complete all as specified and directed. 85 Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete. 86 Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever requiredas per manufacturerers instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and faircomplete all as specified NOTE -WPC shall be measured and paid separetely. 87 M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete. 88 Supply only WPC complete all as specified and directed. 89 M&L for preparation of newly plastered surfaces of wall applying a layer of wall care putty 2mm thick (averaging) , finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed 90 M&L for complete removal of existing treatmentby srapping down of old surface of wall applying a layer of wall care putty 2mm thick (averaging) , finishing walls with Acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed 91 M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion, over a coat of rprimer on wall complete all as specified and as directed 92 M&L for complete removal of existing surface and applying two coats of oil bound distemper white or tinted on old decorated/undecorated surfaces of wall complete all as specified and directed. 93 M&L for applying two coat of oil bound distemper to old decorated surface of ceiling to match the existing surface including preparation of surfaces complete all as specified and as directed, 94 M&L for applying one coats of synthetic eneamel painting over a coat of pink primer on new wooden surfaces exc 10 cm width or girth including preparation of surfaces complete. 95 M&L for one coat of synthetic enamel paint over a coat of primer with red oxide, zinc chrome to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete 96 Dismantling water tanks of capacity exc 500 butn.exc 1000ltrs complete. 97 S&Frotational moulded polythene water storage tanks tripple layer(cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gramcomplete all as specified and directed. 98 Excavation in trenches not exc. 1.50m wide and not exc. 1.50m in depth for foundation etc or for manholes cesspits, shafts etc not exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and directed. 99 Removing excavated soil to a distance n.exc 50m where directed at a level n.exc 1.50m above the starting point complete all as specifed and directed. 100 Return filling , in including spreading , levelling , watering and levellng and well ramming in layers not exc 25 cm compleate allas specified and directed. 101 Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete. 102 M&L for cement concete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes of 160mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. 103 M&Lunplasticised PVC pipe 160mm dia type B with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed. 104 S&F Stop valves,15mm fancy type, chromium plated with long shank andcup (concealed type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified 105 Taking down carefullyaluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface. 106 Supply & Fixing point wiring for one light point/ fan (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS)PVC cable drawn into & including medium grade PVC conduit (not less than 20mmouter dia ) with all fittings and accessories fixed concealed(including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) andsunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washersincluding one continuous run of PVC insulated (green colour) 1.5 Sqmm multistrandedcopper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge. 107 All as per item No.106 herein before but one light point controlled by one two way switch 108 All as per item No.106 herein before but one socket outlet 5 Amps on the same board. 109 All as per item No.106 herein before butone 3 pin socket outlet 5 Amps independent. 110 All as per item No.106 above but with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 5/15 Amps socket. 111 Suppy & Fixing switch piano flush type single pole, one way 6 Amp complete all as specified and directed. 112 Supply & Fixing switch piano, flush type single pole 16 Amp complete all as specified and directed. 113 Suppy & Fixing switch piano flush type single pole, two way 16 Amp complete all as specified and directed. 114 Supply & Fixingsocket outlet 2 in 1, 3 pin, 6 and 16 Amp flush type complete all as specified and directed. 115 Supply & Fixing socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and directed. 116 S&F ceiling rose surface bakelite3 terminal with base plate. 117 Supply & Fixing lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting complete all as specified and directed. 118 Supply & Fixing steped type electronic fan regulator flush type on the existing phenolic laminatedsheet etc. 119 S&F LED Bulb 9 Watt with minimum 5 Years warranty all as specified and directed. 120 S & F exhaust fan made of sturdy Engineering plastic type ISI Mark, copper winding of sweep 250 mm size completewithlouvers including cutting opening through brick/stone /PCC block wall, making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accessories complete all as specified and directed. 121 Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.completeall as specified and directed.. 122 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible opper conductor cable of suitable size complete all as specified and directed.. 123 Supply and fixing LED Security/Street light fittings 35 watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant inclding thermal management in multiple optics complete with IP 65/66 Protectionwith GI Pipe light gradebracket 1.2 mtr long 40 mm dia fixed to wall with suitable size 2 Nos MS Clamps including nuts, bolts and washers and making connection with using 1.5 sqmm pvc insulated multi standard copper conductor three single core complete all as specified and diredted. 124 Supply & Fixingsheet metal enclosure forSPN DBs (double door type) Single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . 125 Supply & Fixing 240V, 10KA C curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . 126 Supply & Fixing 240V, 10KA B curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . 127 Supply and fix water heater storage type electric supplied and installed complete steel body with copper inner tank and heating element upto 2 KW of capacity 25 ltrs, BEE 5 Star rated including making connection with industrical socket, ultra thick SS inner tank of superior 304 grade, Fire retardant ISI Mark supply cord, Rust & shock proof ABS body, Compact & easy to install and proper hanging on nut bolts washers grouted on wall and PVC pipe for connection of hot and cold water complete all as specified and directed by Engr-in-charge. 128 M&L for Earthingcomplete with galvanized sheet earthplate electrodes 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanizedearth lead wire 4.0 mm dia as earthing lead by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and incl the earth test point of galvanized Iron/steel of size 75x75x 25mm,supplying and laying charcoal dust, common salt, PCC 1:2:4 typeB1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for wateringand connected to earth test point including brazing at all joints except at test point and testing complete all as specified and directed by Engr-in-Charge. 129 Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core. 130 M&L for sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified 131 M&L for laying of bricks well burnt sub class ‘B’ (old pattern) laid flat for cable protection width equal to the lengrth of brick complete all as specified . 132 M & L galvanised steel water tubing light grade40 mm bore with all fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed . 133 Supply and fixing Out Door type Bus bar chamers 100 Amps 4 Nos Aluminium Bus BAR (0.6 Meter length) wall mounted or fixing on ground with mounting suitable angle iron with PCC Basefor suitable for incoming and out going Cable nut and bolts including lugs& cable glans complete as specified and directed by Engineer-in-Charge. 134 M&L for Earthingcomplete with galvanized sheet earthplate electrodes 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and incl the earth test point of galvanized Iron/steel of size 75x75x 25mm,supplying and laying charcoal dust, common salt, PCC 1:2:4 typeB1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for wateringand connected to earth test point including brazing at all joints except at test point and testing complete all as specified and directed by Engr-in-Charge.
