|
| 1 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. |
| 2 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed. |
| 3 | M&L for preparation of new steel surfaces and applying two coats ofsynthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 4 | S&F of Curtain rod side brackets stainless steel, decorative type of approved quality, complete all as specified and directed. |
| 5 | S&F in repair 25 mm dia decorative typestainless steel and decorative type and cap/finial etc & all other connected works, complete all as specified and directed. |
| 6 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 7 | M & L for Granite18- 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite flooringincluding 20 mm thick screed bedding in cement mortar 1: 6 and all other similar works, complete all as specified and directed. |
| 8 | S&F of 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc., complete all as specified and directed. |
| 9 | S&F of 125mm size Butt hinges, extruded brass, with brass hinge pin, bright polished and fixed, type B-11 etc, complete all as specified and directed. |
| 10 | S&F of 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed etc., complete all as specified and directed. |
| 11 | S&F of 150mm long floor door stopper of ,brass body and tongue with hard drawn steel spring fixed in floor etc., complete all as specified and directed. |
| 12 | S&F of 150mm long Extruded brass handles, fabricated type polished etc., complete all as specified and directed. |
| 13 | M&L of preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel painting, complete all as specified and directed. |
| 14 | Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster, complete all as specified and directed. |
| 15 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 16 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, with mixing WPC @ 3% by wt of cement surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 17 | M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling, complete all as specified and directed. |
| 18 | M&L for preparation of new plaster surfaces of ceilingand applying two coats of oil bound distemper over one coat of primer including 1 mm thick wall care puttycar, complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over one coat of primer including 1 mm thick wall care puttycar, complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for Providing & applying anti algal water-based Elastomeric exterior wall finish on old as well as newly plastered surfaces including surface preparation, applying suitable wall Prime seal primer 8-10 Sqm per ltr coverage area and application of two coats (base coat 4.2 -4.7 & top coat 6-6.5 sqm per ltr coverage area ) & of paint by roller etc. complete all as specified and directed. (Make- Dr Fixit Rain coat classic, Asian paints, Berger as approved). |
| 21 | M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper overover one coat of primer over 1 mm thick wall care putty, complete all as specified and directed by Engr-in-Charge. |
| 22 | Material and Labour for preparing newly & Old plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic)Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator onlyincluding use of scaffoldings from Ground floorupto 04 storeys height of bldgs bldgs, complete all as specified and directed.Make: \"Apex Ulitima\" of Asian Paints \"trucare\" Primer / \"Weather coat all Guard\"of Berger Paints /Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid. |
| 23 | S & F of 12 mm thick plain toughened glass in doors/ windows framing doors handle, suitable hinges, rubber beading, floor spiring and all necessary fittings complete Including dismantling of old glass any type, complete all as specified and directed.Make- 1 Saint Gobin 2 Asahi 3 Atul Glass Industries 4 Golden Fish 5 Modi Guard 6 Hindustan Pilkington GlasNote :- The desion drawing of necessary fittingS S in Doors/ Windowsapproved by GE(i) SS fitting will be measured & paid separately. |
| 24 | M&L for SS 316 grade stainless steel(Square/Round/Rectangular) of suitable gauge as in SS guard bars, railings, SS frame works as in windows, balcony, including all fixing arrangments, including taking down of old guard railing, complete all as specified and directed. |
| 25 | Dismantling boarding, like wall paneling or false ceiling in any description, fixed in any position with nails, complete all as specified and directed. |
| 26 | Providing & fixing false ceiling at all heights with semi peforated 12 mm thick micro tengular edged GRG (Glass Fibre Reinforced Gypsum) falseeiling tiles of12mm Size 595 x 595 mm of approved texture,design and patterns having moisturecontent less than 2%, humidity resistance99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length00mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. complete all as specified and directed. |
| 27 | S & F for powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame, complete all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.(iv) Windows all around will be sealed with silicon sealant.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India. |
| 28 | S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple incl fixed in repair, complete all as specified and directed. |
| 29 | M&L for 5.0 mm thick sheet glass tinted colour frostedordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified & directed. |
| 30 | Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof), complete all as specified and directed. |
| 31 | M&L for cutting out cracks to v-section in existing roofs or terrace cleaning grouting with cement and sand slurry 1:3, complete all as specified and directed. |
| 32 | M&L for cutting grooves in brick wall 75mm wide and 65mm deep & shaping horizontal face of groove with cement, complete all as specified and directed. |
| 33 | M&L forPCC 1:3:6 type B-1(using 20mm graded curshed stone aggregate) for providing cement concrete as levelling and roof kerbs or mud stops, including finishing the surface with grinder to receive the acrylic based water proofing material, rounded or chamfered on edges etc, complete all as specified and directed. |
| 34 | M&L for preparation of new surface andapplying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm, complete all as specified and directed. |
| 35 | M&L for applying one coat of aluminium paint at the rate of 100 gms/sqm as per manufacturers instructions over bituminous layer, complete all as specified and directed. |
| 36 | M&L for APP basedpolymeric water proofing membrane minimum weight 3.5 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS),laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer, complete all as specified and directed. |
| 37 | M&L for rendering or bedding layer15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with linesed oil @ 3% wt of cementinclduing finishing surfaces even and fair without using extra cement including linesed oil, complete all as specified and directed. |
| 38 | M&L for 300mmX300mm, 9-10 mm thick size roof cool ceramic tile to reduce room temperature, slip risistance, white in colour, having properties like water absorption max 3.3%, breaking strength 1000N, moisture expansion maximum 3% scratch hardness 4 minimum, thermal shock reisistance 10 cycles, min impact resistance 0.55 minimum, tiles laid on cement mortar 1:6 and pointing in CM 1:3 over 15 mm screed bed, complete all as specified and directed. |
| 39 | S&F in repair Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, complete all as specified and directed. |
| 40 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
