Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc and removal of debris/rubbish off the premises etc complete all as specified and directed. |
| 4 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed. |
| 6 | Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing),rubish off the premises complete all as specified and directed. |
| 7 | Taking up or down steel water tubing and connections including cleaning for refixing of pipe 20mm bore dia all as specified and directed. |
| 8 | All as per item No 07 here above but 15 mm bore |
| 9 | Dismantlingof plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, and removal of rubbish complete all as specified and directed. |
| 10 | Excavating in post holes (or similar holes) in soft /loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified and directed. |
| 11 | Surface dressing n.exc (not exceeding) 30cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed. |
| 12 | Excavating in trenches n exc 1.5m wide and n exc 1.5m depth for foundation etc or for shafts, well, cesspits, manholes, pier holes, cable, pole, drainage trench etc n exc 10 sq m on plan and n exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed. |
| 13 | Returning, filling in, including spreading, leveling,watering and well ramming in layers not exceeding 25 cm in depth, complete all as specified and directed. |
| 14 | Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 15 | S&F Solid PVC door frame of size 50 x 47 mm made out of 5mm wood grain printedPVC sheet used instead plain colour PVC sheet & edges shall be painted to matchwith printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 16 | S&F Factory made solid panel PVC door shutter 30 mm thickconsisting of frame made out M.S. tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colourPVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colourPVC sheet5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame as per specification & drawing or (as per sample) complete all as specified and directed. |
| 17 | S&F Factory Made Solid PVC Moulded door Shutter With wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 18 | S&F Box type Steel windows and ventilators comprised of tubular frameand shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg staydovetailedor welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50x100 mm (duble rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant, fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length completeall as specified and directed.Note: (ii) For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (iii) Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50x100 mm (Single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant, fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length completeall as specified and directed.Note: (ii) For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (iii) Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 21 | 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces, complete all as specified and as directed. |
| 22 | S&F 30mm thick factory made 2nd class hard woodglazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain chamfered or rounded, mitred and rebatedsash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge. Size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-Icomplete all as specified & directed. |
| 23 | PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified. |
| 24 | M& L for Form work to sides of concrete foundations, footings, bases of columns, raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed. |
| 25 | M&L for formwork to sides to roof beam/lintal beam complete all as specified and directed. |
| 26 | M&L for formwork to sides to sides to chajja concrete etc complete all as specified and directed. |
| 27 | M&L for formwork to sides to sides to pillers struts cloumns etc complete all as specified and directed. |
| 28 | M&L for formwork to sides to roof slab, floor slabs, landings and similar wirks not exc 200mm thick etc complete all as specified and directed. |
| 29 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide, rough finished surfaces of concrete complete all as specified and directed |
| 30 | RCC M-25 design mix using 20 mm graded aggregatein foundations, including rafts, footings, foundation beams, plinth beams, base for columns, etc basements slabs under rammed piles and mass concrete complete all as specified and directed. |
| 31 | RCC M-25 design mix using 20 mm graded aggregate as in beams, cantilevers, bressummers lintels over 1.5 m span complete all as specified and directed. |
| 32 | RCC M-25 design mix using 20 mm graded aggregate in column etc complete all as specified and directed. |
| 33 | RCC M-25 design mix using 20 mm graded aggregate in chajjas etccomplete all as specified and directed. |
| 34 | RCC M-25 design mix using 20 mm graded aggregate in slabs supported on walls beams, columns etccomplete all as specified and directed. |
| 35 | M&L for preparation ofsteelsurfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of red oxide primer on steel sheeting as in roofingcomplete all as specified and as directed. |
| 36 | S&F glavanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture1.00 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed. |
| 37 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed. |
| 38 | S&F 4 mm thick figured (frosted)glass, pin headed ordinary quality and glazing with oil putty or fixed with bead/wooden beads in squares not exc 0.50 Sqm in each pane complete all as specified and directed. |
| 39 | S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 40 | S&F 100 mm size stainless steel butt hinges (as per sample) complete all as specified and directed. |
| 41 | S&F for 250 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed |
| 42 | S&F aluminiumanodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed. |
| 43 | S&F aluminiumanodized barrel tower bolts 150 mm of extruded section (as per sample) fixed complete all as specified and directed. |
| 44 | S&F 150 mm size aluminium alloy handles, febricated type extruded section(as per sample), complete all as specified and directed. |
| 45 | S&F in repair25mm bore mild steel powder coated, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, fenials etc (as per sample) suitable for single curtain rod, fixed in repair complete all as specified and directed. |
| 46 | Brick work with old servicable bricks retrieved from dismantling, straight or curved on plan exc 6 mtr mean radius built in CM 1:4complete all as specified and directed. |
| 47 | M&L Brick work withstraight or curved on plan to anyradius in half brick thick walls built in CM 1:4complete all as specified and directed. |
| 48 | M&L Brick work with fly ash bricks (Old Size bricks)straight or curved on plan exc 6 mtr mean radius built in CM 1:6complete all as specified and directed. |
| 49 | M&L Brick work with fly ash bricks straight or curved on plan any radius built in half walls, built in CM (1:4)complete all as specified and directed. |
| 50 | M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 51 | Rendering 5mm thick in cement and sand mortar 1:3 on fair face of concrete surface of ceiling/Top and sides of chajjas/facia of roof projection including necessary formwork and finishing the surface without using extra cement, complete all as specified and directed. |
| 52 | M&L for rendering or plastering 15 mm thick cemet plster on fair faces of brick work or concrte surfacesin CM 1:4 in two layers(5mm finishing layer over 10mm base layer) finished even and surface without using extra cemen with WPC over finishing layercomplete all as specified and directed.Note: WPC shall be measured and paid seperately) |
| 53 | 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 54 | M&L for rendering or plastering 10 mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas,roof projections, drainge etc including taking out peeled off plaster/ concrete and making the edges in line, in true shape and finishing the surface without using extra cement complete all as specified and directed. |
| 55 | M&L for preparation of new plastered surface of external wall and chajjas,making surface smooth using sand paper, priming the surface with alkali resistance primer paintfor external surface, applying two coats of cement base paint including curing complete all as specified & directed. |
| 56 | M&L for preparation of new/ old wall surface, making surface clean, dry, free from any loose paint film, dirt, chalk, grease, fungus and algae etc and applying one coat of antifungal acrylic emulsion exterior weather proof paint complete all as specified and directed. |
| 57 | M&L two coats of distemper oil emulsion over primer coat after application of average 3mm thick wall care putty including prepartion of new plastered wall surface complete all as specified & as directed. |
| 58 | M&L for three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and as directed. |
| 59 | M&L for three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed. |
| 60 | M&L forapplying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 61 | M&L two caot of white wash on surface of wall including preparation of old plastered surface complete all as specified & directed |
| 62 | M&L two caot of white wash on surface of ceiling including preparation of old plastered surface complete all as specified & directed |
| 63 | M&L for preparation of old surface after complete removal of existing treatmentmaking surface smooth, applying two coats of cement base paint over a alkali resistance primer paintcomplete all as specified & directed. |
| 64 | M&L for25mm thick PCC type B-1, 1:2:4 ( using 20mm graded crushedstone aggregate) as in sub floors for laying floor finish complete all as specified and directed. |
| 65 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqmin floors etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementlaid over 15mm thick screed bed or bedding layerof mortar in CM (1:6)complete all as specified and directed. |
| 66 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqmin skirting/dado or verticle surface etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed. |
| 67 | M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm/ 450x350x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match including 10mm thick CM 1:4 and finished rough including cement moratr bedding(but not backing removing servicable tiles site and rubbish off the premises) complete all as specified and directed . |
| 68 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqmin floors an skirting etc set and jointedin neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed or bedding layer of mortar in CM (1:6)complete all as specified and directed |
| 69 | M&L for Round chamfering to the edgesof marble/granite slabs not exc 15 mm wide complete all as specified and directed. |
| 70 | M&L for cement concrete type C-1, 1:3:6 (using 20mm graded crushedstone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 71 | M&L for 75mm thick PCC 1:4:8 typeD-2 (using 40mm graded crushedstone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed. |
| 72 | M&L for Cement concrete 1:4:8 typeD-2 (using 40mm graded crushedstone aggregate) as in sub bases tofloor finishes complete all as specified and directed. |
| 73 | M&L for80mm thick M-40 grade factory madeinterlocking paver block machine pressed (using vibro compaction method) with topping in white cement not less than 5mm thick and non fadeble glossy pigment (using rubberised moulded, glossy finish) of approved colour and shape confirming to IS-15658-2006complete all as specified and directed. |
| 74 | M&L forSand filling under floors or paving including watering and consolidationand all as specified complete all as specified and directed. |
| 75 | M&L for60mm thick M-35 grade machine pressed precast rubber moulded interlocking paver block Grey/red/yellow) of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS-15658-2006complete all as specified and directed. |
| 76 | Cement concrete M-15 (Nominal mix) in edging of path (interlocking paver) and the like including weathering slightly rounded or charmfered angles including form work and finishing all exposed surfacecomplete all as specified and directed. |
| 77 | M&L green/ black Marble work 18-20mm thick (table rubbed and polished) in cooking plateform,window cill, steps, stair case trade & riser etc in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra complete all as specified & directed. |
| 78 | M&L for 12 mm thick heavy duty Industrial tiles(sqaure/ rectangular), area of each tile exc 0.08 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15 mm thick screed bed or bedding layer mortar in CM 1:4 including dismantling of old tiles of any description with bedding layer of mortar and removal of rubbish complete all as specified and as directed. |
| 79 | S&F15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. |
| 80 | Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed. |
| 81 | M&L for cutting chases, pinning in brick work,making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed. |
| 82 | S&F20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. |
| 83 | S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed. |
| 84 | S&F 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed. |
| 85 | Stainless steel gratings75mm bore size fixed with cement motar |
| 86 | S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch lever handle screwed both ends for iron pipe 15mm bore dia fixed in repair, complete all as specified and directed. |
| 87 | S&F in repair15mm bore dia Bib taps, cast copper alloy, chromium plated fancy typeISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed. |
| 88 | S&F in repair Vitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting standincluding 32 mm diawaste pipe complete all as specified and directed. |
| 89 | S&F in repair Vitreous china wash basin, white flat back, size 630 x 450 mm (as per sample), excluding pillar tap, waste fittings chromium plated brass and rubber plug, porcelain stopper a pair of CI brackets, waste pipe and pillar tap etc complete all as specified and directed. |
| 90 | S&F in repair 15mm bore pillar cook fancy type, screwed down high pressure with or without letters HOT or COLD with long screwed shank and fly nuts screwed for iron pipe, ISI marked complete all as specified & directed. |
| 91 | S&F in repair towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm thick complete all as specified and directed. |
| 92 | S&F in repair brass CP Shower rose with or without swivel joints,(any size) including fixing to steel pipe or union complete all as specified & directed. |
| 93 | S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed. |
| 94 | S&F in repair 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 95 | S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern(including fixingofflush pipe) including provision of cement concrete bedding, in repair complete all as specified & directed. |
| 96 | S&F in repair one piece Vitreous china wash down water closet pan pedestal pattern with flusing cistern, (size 69x36x74cm) white including making connections to trap, and to flush pipe including plastic seat and cover (as per sample ) with Stainless steel or aluminised hinging device and fixed complete all as specified and directed. Make : Hindware cat part No. 92082 or equivalent to Somany & Cera |
| 97 | S&F in repair Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats(min wt 190 gm) complete all as specified and directed. |
| 98 | S&F in repair Vitreous china bowl urinal half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe including providing and fixing of PTMT urinal spreader with 15mm dia pipe, complete all as specified and directed. |
| 99 | PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete (sunken floors etc) complete all as specified. |
| 100 | Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately. |
| 101 | S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC,complete all as specified and directed. |
| 102 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 103 | Rotational moulded polyethlene water storage tanks of capacity exc 500 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC Tank of any capacity complete all as specified & directed. |
| 104 | S&F in repair 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified and directed. |
| 105 | S&F in repair110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified and directed. |
| 106 | S&F for PVC (SWR) floor bend plain including jointing with solvent cement 100mm bore complete all as specified and directed. |
| 107 | All as per Srl item No 106 here-in-before for 75mm bore pipe |
| 108 | S&F for PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore complete all as specified and directed. |
| 109 | 75mm bore pipe PVC (SWR) vent cowl, fixed in repair, complete all as specified and directed. |
| 110 | S&F Mild steelTMT bars bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 111 | All asper srl item No 110 above but6 to 8mm dia. |
| 112 | M&L steel work in rectangular special shape post including distance pieces, cleats etc including necessary cutting/notching/drilling rivertting/welding or connecting with bolts or nuts conforming to IS 1161-1979grade st-240 (shape and size approved by GE) complete all as specified and directed. |
| 113 | M&L for stainless steel (Grade 304) railing, pole, purling, rufter etc made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature and fitting the same with necessary stainless steel nuts and bolts, including making hole supply and fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts,caps etc on the top of floor or the side of waist slab with suitable arrangementcomplete all as specified and directed. |
| 114 | S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixedcast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed. |
| 115 | S&F in repair Cast iron soil, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed |
| 116 | S&F in repairs 100mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured)complete all as specified and directed. |
| 117 | S&F in repairs 100mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access doorcomplete all as specified and directed. |
| 118 | S&F in repair cast iron 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors, fixed in repair complete all as specified and directed. |
| 119 | S&F in repair Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, as in floor with all fittings complete all as specified and directed |
| 120 | S&F in repair Cast iron soil, waste and vent pipes, sand cast, 50mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed |
| 121 | S&F in repairs 75mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured)complete all as specified and directed. |
| 122 | S&F in repairs 75mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access doorcomplete all as specified and directed. |
| 123 | S&F in repair cast iron 75mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doorsfixed in repiars complete all as specified and directed. |
| 124 | S&F in repair Cast iron floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed. |
| 125 | S&F in repair Cast iron cowl of 50mm bore complete all as specified and directed. |
| 126 | S&F in repair Cast iron Swan necks (or offsets) upto 152mm projection for 100mm to 50mm pipe complete all as specified and directed. |
| 127 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushedstone aggregate) as in foundation, filling and mass concretecomplete all as specified and directed. |
| 128 | Cement concrete 1:2:4 type B-2 using 40mm graded crushedstone aggregate in foundation, filling and mass concrete complete all as specified and directed. |
| 129 | M&L steel iron base plate plugs, bolts and screws of Fe 410 -W (Gde E-250) quality Acomplete all as specified and directed. |
| 130 | S&F mild steel as in vertical posts,Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow section square/rectangular) or flat sections including distance pieces complete all as specified & directed. |
| 131 | S&F Pre-painted galvalume aluminum zinc coating( zinc coating 275) GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed. |
| 132 | M&L forPCC 1:2:4 type B-0 ( using 12.5mm graded crushedstone aggregate) padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed. |
| 133 | M&L forPCC 1:2:4 type B-1 ( using 20mm graded crushedstone aggregate)as in coping, bed plates benching etc slightly rounded or chamferred angles and throating complete all as specified and directed. |
| 134 | M&L 20 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) |
| 135 | M&L 15 mm thick cement plaster in cement mortar 1:3 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) |
| 136 | M&L for preparation of surfaces and apply first coat fiber reinforced elastomatic liquid water proofing membrane formulated with PU hybrid ploymersand reinfoecing acrylic fibers with sun reflective index(SRI) of 100-110 having maximumelongation of 350% tensile strength od 2.9 Mpa and shall have crack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic presure and reduce surface temprerature upto 10 degree celsius with 33% ditution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 grm/sqm and pastinf it properly with overlaping of 50mm and allow it to dry, Apply second coat of undiluted coat @ 0.45 ltr/ Sqm . Apply third and final coat undiluted @ 0.45 ltr/sqm complete application to be done by the manufacture of authorised applicator complete all as specified and directed. |
| 137 | Note for item No 136 :-(a) Cleaning of dust, removal for all loose existing bituminous material manually with heat torch gun to get smooth plain finished surface, removing of vegetation/plantaion with no loose material on surface.(b) Conduct ponding test after 7 days, continnue curing of 14 days.(c) All Shifting/ removing of any wire/cable/AC unit/Water tank of any capacity or other any object as per site requirement an re-fixing the same, if needed shall deemed to be included in the quoted rates by the contractor. (d) Removal of any loose/packed items such as mud phuska, terrace tiles, cement screed bed shall be removed and surface shall be made free from depressions before applying treatment to the roof. Quoted rates shall deemed to be includedthis fact into account and no extra payment shall be made on this account. (e) Contractor shall verify availability of the materials in full qty from market before quoting the rates as no extension of time on this ground shall be granted.(f) All the sample/ make for water proofing material mentioned in item shall be got approved from the GE before procuring bulk quantity of material. |
| 138 | Supply only liquid water proofing compoundas per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directedcomplete all as specified and directed. |
| 139 | M&L for Concrete bed todrain pipes 150 bore, laid in trenches including packing under, and haunching against the sides& surrounding of pipes after they are laid and tested; in cement conctrete type C-2, 1:4:8, using 40 mm graded crushedstone aggregate complete all as specified & directed. |
| 140 | S&F for 150 mm bore reinforced cement concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 141 | M&L for rendering 15 mm thick cement mortar 1:3 on on brick masonry surface finished even and fair without using, extra cement including mixing of water proofing compoundas per manufacturer instruction complete all as specified & directed (WPC shall be measured and paid separately) |
| 142 | S&F forprecast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), as in manhole cover slabscomplete all as specified and directed. |
| 143 | M&L for Construction of septic tank for (10 user)in hard/dense soil, foundation in PCC 1:2:4 brick work in CM 1:6 with RCC cover slab including RCC precast manhole cover having 6mm plate embedded all around/ fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc complete all as specified and directed.(DRG NO. CEPZ/C-TD/013/13 SH 4/5 DT 11 SEP 2013) |
| 144 | M&L for Soakage well excavation in hard/dense soil, foundation in PCC 1:3:6 walls of honey combed and soild in M-25 concrete including intercepting chamber, screen chamber brick work in CM RCC M-25, cover slab filled with brick bats complete of size 1.8M X 3.0M deep complete all as specified and directed.(DRG NO. CEPZ/C-TD/013/13 SH 1/5 DT 11 SEP 2013) |
| 145 | Cutting into existing manholes for connecting new drains for ineternal dia of pipe 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 146 | S&F Alex 4mm ACP Sheet as in roof/wall Sloping/curved fixing and high and any position with screw including all connected fittings all as per manufacture instructioncomplete all as specified and directed. |
| 147 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 148 | M&L for 100mm thick Plain cement concrete type D2 1:4:8 (40mm graded crushed stone aggregate) complete all as specified and directed. |
| 149 | Moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15cm thick, spread , levelled and rammed including watering complete all as specified and directed. |
| 150 | M&L for 75mm thick PCC 1:3:6 type C-1(using 20mm graded crushed stone aggregate) as in floor complete all as specified and directed. |
| 151 | M&L 40mm thick Plain cement concrete 1:2:4 type B-1(using 20mm graded aggregate) in sub base, sub floors, base floors etc complete all as specified and directed. |
| 152 | M&L for alex g letters or figures (Block, Roman, Italic or Indian) exc. 30cm high complete all as specified and directed. |
| 153 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixturesuch as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc with cement moratr and finishers to match existing surface complete all as specified and directed. |
| 154 | M&L for point wiringusing 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with 1.2mm thick GI/MS pressed steel sunken boxes of adequate size,3mm thick plastic laminated sheet cover fixed with brass screws including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. Note: 1) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible. |
| 155 | All as per Ser item No 154 but for one light point controlled bytwo 2 way switch. |
| 156 | All as per Ser item No 154 but for one5/6 Amp socket outlet point on same board controlled by one switch. |
| 157 | All as per Ser item No 154 but for one5/6 Amp socket outlet points on independentboard controlled by one switch. |
| 158 | All as per Srl item No 154 here-in-before for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor. |
| 159 | S&F switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed. |
| 160 | S&F socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type with shutters, 240 volts complete all as specified and as directed. |
| 161 | S&F socket outlet 2 in 1, 3 pin, 5/15 Amp flush type, 240 volts complete all as specified and as directed. |
| 162 | S&F socket outlet 2 in 1, 6 pin, 6/16 Amp flush type, 240 volts complete all as specified and as directed. |
| 163 | S&F switch 15/16 Amps, flush type, 240 volts complete all as specified and as directed. |
| 164 | S&F switch piano flush type with shutters single pole one way 15 Amp 240 volts complete all as specified and as directed. |
| 165 | S&F switch flush button single pole two way 5 Amp complete all as specified and as directed. |
| 166 | S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals. |
| 167 | S&F stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and directed. |
| 168 | S&FLamp holder jumbo modular type, PVC/Polycarbonate type with back plate complete all as specified. |
| 169 | S&F LED lamp 12 watts 230 volts retfrofit suitable for any type lamp holder as required complete all as specified and directed. |
| 170 | S &F in replacement for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x2.5 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 2.5 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 20mm dia 1.2mm thickwith all accessories, fixed to surface/recessed including taking down existing submain with old unsv PVC conduit complete all as specified and directed. |
| 171 | S &F in replacement for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 25mm dia 1.2mm thickwith all accessories, fixed to surface/recessed including taking down existing submain with old unsv PVC conduit complete all as specified and directed. |
| 172 | MCB DB, SPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wallincluding cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, painting the plastered surface with same colour complete all as specified and directed. |
| 173 | MCB DB, SPN, 4 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wallincluding cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 174 | S&F MCB, SPN, 240 volts, 50Hz, 10 KA of rating 63 Amps,\"C\" series complete all as specified & directed. |
| 175 | S&F MCB, SP, 240 volts, 50Hz, 10 KA of rating 6 to 32 Amps,\"C\" series complete all as specified & directed. |
| 176 | S&F MCB SP 240V, 50Hz of rating6 to 32 Amp, \"B\" curve using suitable size copper thimbles complete all as specified and directed. |
| 177 | All as per Ser item No 176 but for size 40-63 Amps MCB SPN. |
| 178 | S&F PVC Switch box enclosure non modular rectangular type for enclosing six 5 Amp switches fitted to iron piller complete all as specified and directed. |
| 179 | S&F in replacement LED mirror light 1x10 Watt 2\" feet prewired with all accessories including lamp complete with all accessories internely pre wired and including connection up with 3 core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 180 | S&Fsurface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protectioncomplete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 181 | S&F 20W surface / wall mounted box type batten LED fitting having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 182 | All as per ser item No 181 but for 10 W LED batten fitting 2 feet long. |
| 183 | S&F in repalcement of intenso LXS LED Batten 20 watt of size not less than 3\"7\", 6500 K, 230 volts, PF-0.95, CRI-80, life 25000 burning hours, wall mounted complete with all accessories internely pre wired and including connecting up with 3 core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 184 | S&F heavy duty 300mm sweep, double bearing copper wounded metallic exhaust fan AC single phase 230/240 V having 1400 ± 50 RPM and power consumption not more thann 45 watt with minimum air delivery 700 CMH including box type square shaped metallic louvers made out of powder coaed CRCA sheet of thickness not less than 01mm alonwith aluminium flaps and fixed with grouting nut & bolts and making the suitable hole of suitable size by breaking the existing wall and making good the disturbed surface by plastering and matching with existing specifications with suitable finishes as per site requirement complete all all as specified and directed. |
| 185 | S&F LED wall security lights of 35 Watthaving pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W,IP65 protection, IK07 rating,inbuilt electronic driver withPF>0.95 incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. |
| 186 | S&FLED Building light 60 Watt, 230 volts with surge protection not less than 4 KV and 10 KV separate in the lighting housing, IP 65, Energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LEDs as light source and electronic driver fixed on pole/wall along with service bracket as per sample, clamps, nuts, bolts, and washers including making electric connection with 1.5 Sqmm multistranded 3 core aluminium conductor cable PVC insulated complete all as specified and directed. |
| 187 | Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts gradewith aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 2 core, including taking down old, complete, all as specified and directed.Note : All the cable entires should be through proper metallic cable gland. |
| 188 | Supply, laying and testing PVC insulated, screened, PVC beded galvanized steel strip or wire armoured, electric cable heavy duty 1100 volts grade wirh stranded aluminium conductor of size 10 Sqmm 2 core complete all as specified and directed. |
| 189 | S&F 1100 volt grade XLPE heavy duty cable size 10 Sqmm 2 core, wire armoured with aluminium stranded conductor PVC insulated laid in trenches including earth work, sand cushioning, brick or PCC covering, light grade GI tubing where necessary testing etc complete, all as specified and directed.Note : All the cable entires should be through proper metallic cable gland. |
| 190 | Supply and fix electric water heater, storage type ABS body type with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/Nuts on both sides for inlet ( cold water supply) and out let (hot water supply), provision of wall mountingarrangement , mounted on wall with suitable sige of anchor bolts, making connection including testing complete all as specified and directed. |
| 191 | Excavation in trenches in any type of soil not exceeding 1.5 m wide and n.exc. 1.5 m deep and getting out for laying of cables complete all as specified and directed. |
| 192 | M&L for sand filling in trenches dry and clean sand unwashed including punning around cable for protection of under ground cable punned thickness shall be measured complete all as specified and directed. |
| 193 | 40mm dia GI tubing, light grade with all fitting laid in trenches or fixed on wall or along pole complete for protection of electric cable/strip, complete all as specified and directed. |
| 194 | Supply andfixingin repairs 20mm dia Gun-metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI marked, as per IS:778 complete all as specified and directed. |
| 195 | Cutting old GI pipes 25/40/50/100mm bore dia only and reducing to required length, before laying in positon for insertion of new tees, branches etc for repair works complete all as specified and directed. |
| 196 | S&F cable junction boxes IP-66 protected \"halogen free and weather proof\" suitable for out door type (with metric konckouts for cable entry) of size 139x119x70mm including suitable size aluminium busbar single phase with neutral system mounted on saddlws-02 Nos of suitable length and thickness ,provn of aluminium cable lugs of incoming & outgoing LT cable connections with junction box fixing clamps made up of MS flat nut and bolt on iron angle of sixe 25mm x 25mm x 3mm, length not less than 1mtr complete all as specified and directed. |
| 197 | S&F MCB SPN 32 Amps 230 volts , 50 HZ AC, 10KA \"C\" curve complete all as specified and directed. |
| 198 | S&F P-10 LED moving/ scrolling messenger adervertising display board of size not less than 128cm x 16cm , wall mount/hanging mount including wifi Programming for the text \"Bus Stop\" P-10 display , 240 V AC, connecting up with 3 core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 199 | M&L for well burned bricks, laid flat (old size) sub class B designation 75 for cable protection complete all as specified and directed. |
| 200 | Supply, Install, testing and commissioning of solar water heating system (Flat Plate collector) based on indirect transfering of heat of capacity 200 LPDinner tank SS-304 (0.5MM) with minimum heating of 50 degree celcuis with electric backup incluidng heating element 2.5 kilowatt and minimum inlet and outlet of tank 3/4 including all accessories and iron stand suitable for mounting of collector plates, complete all as specified and directed.Make : Suryaurja, Stellar, Sun Rise Infra, Northsun Solar Corp |
| 201 | S&F 3 layer PP-R pipe of size 25mm SDR 11UV stablized and antimicrobial welded having termal stability for hot and cold water supply including All PP-R plain and brass threaded polypropylene random fittings fix complete to walls ceiling or in floors etc complete all as specified and directed. |
| 202 | S&F 3 layer PP-R pipe of size 20mm SDR 11UV stablized and antimicrobial welded having termal stability for hot and cold water supply including All PP-R plain and brass threaded polypropylene random fittings fix complete to walls ceiling or in floors etc complete all as specified and directed. |
| 203 | S&F PPR gate valve (brass inserted) as per site requirement of size for 25mm dia pipe complete all as specified and directed. |
| 204 | S&F PPR gate valve (brass inserted) as per site requirement of size for 20mm dia pipe complete all as specified and directed. |
| 205 | S&F sheet metal enclsures single pole & neutral with two pin and earth plug & socket complete with MCB 20A, 240V |
| 206 | M&L for cutting the PCC road not less than 15cm in depth and 15cm in width for inserting GI pipe upto 40mm dia bore for cable protection and making good the disturb road surface and matching with the existing specification complete all as specified and directed.Note : PCC work for the road to be measured and paid separately |
| 207 | M&L for Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) for the road repair and levelling the existing surface of road complete all as specified and directed. |
| 208 | Earthing complete with galvanized steel earth plate electrode60cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of2009.Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmmin lieu of CI cover. |
| 209 | Earthing complete in repair with galvanized steel earth plate electrode60cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to Gl earth strip 32x6mm as earth leadby means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 40 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of2009.Note : 1. RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmmin lieu of CI cover. 2. On testing after completion if the desired earth resistance is not obtained the earthing will be re-done at no extra cost. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
