|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish beyond MOD land complete all as specified and directed. |
| 4 | Demolition of cement concrete (un-reinforced) in ground floor and paving and any type of PCC(like kerb stone)(below or above ground level) and removal of rubbish beyond MOD land complete all as specified and directed. |
| 5 | Demolition of brick work or stone masonay built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed. |
| 6 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed. |
| 7 | Dismantlingof Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, and removal of rubbish complete all as specified and directed. |
| 8 | Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing),rubish off the premises complete all as specified and directed. |
| 9 | Taking up or down steel water tubing and connections including cleaning for refixingof pipe 15mm bore complete all as specified and directed. |
| 10 | Taking up or down steel water tubing and connections including cleaning for refixingof pipe 20mm bore complete all as specified and directed. |
| 11 | Dismantling of brick tile or terracing tiles with bedding layer of mortar , APP membrance etc and removal of rubbish beyond MOD land completeall as specified & directed. |
| 12 | M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth mixed with liquid water proofing compound as per manufacturer instruction including raking out joingts, hacking for key, scrubbing down with water etc complete all as specified and directed.Note : WPC shall be measured separately. |
| 13 | M&L for preparation of surfaces and apply first coat fiber reinforced elastomatic liquid water proofing membrane formulated with PU hybrid ploymersand reinfoecing acrylic fibers with sun reflective index(SRI) of 100-110 having maximumelongation of 300% tensile strength od 2.9 Mpa and shall have crack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic presure and reduce surface temprerature upto 10 degree celsius with 33% ditution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 grm/sqm and pastinf it properly with overlaping of 50mm and allow it to dry, Apply second coat of undiluted coat @ 0.50 ltr/ Sqm . Apply third and final coat undiluted @ 0.50 ltr/sqm complete application to be done by the manufacture of authorised applicator complete all as specified and directed. |
| 14 | Note for item No 13 :-(a) Cleaning of dust, removal for all loose existing bituminous material manually with heat torch gun to get smooth plain finished surface, removing of vegetation/plantaion with no loose material on surface.(b) Conduct ponding test after 7 days, continnue curing of 14 days.(c) All Shifting/ removing of any wire/cable/AC unit/Water tank of any capacity or other any object as per site requirement an re-fixing the same, if needed shall deemed to be included in the quoted rates by the contractor. (d) Removal of any loose/packed items such as mud phuska, terrace tiles, cement screed bed shall be removed and surface shall be made free from depressions before applying treatment to the roof. Quoted rates shall deemed to be includedthis fact into account and no extra payment shall be made on this account. (e) Contractor shall verify availability of the materials in full qty from market before quoting the rates as no extension of time on this ground shall be granted.(f) All the sample/ make for water proofing material mentioned in item shall be got approved from the GE before procuring bulk quantity of material. |
| 15 | M&L cement concrete 1:3:6 type C1 (using 20mm graded crushedstone aggregate) as in surface channel and drains complete all as specified and directed |
| 16 | M&L for Brick work with fly ash bricks (Non-Modular) straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & directed. |
| 17 | M&L forPCC 1:3:6 Type C1 (using 20 mm graded crushedstone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching to manholes, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed |
| 18 | S&F Box type Steel windows and ventilators comprised of tubular frameand shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg staydovetailedor welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 19 | S&F pressed steel frames for doors/windows of size 125x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed. |
| 20 | S&F for MS angle Fe 410-W gde E-250 quality A for Cupboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 21 | S&F in repair factory made 17-18mm thick WPC (wood plastic composit boards) for cupboard shutter of density 600 kg/cm3with 100% termite/water proof, fire rertradent, Eco friendly and finish at all edges at level for making edges lippingusing binding tape etc as in Kitchen cupboard including stainless steel, concealed hinge, stainless steel handle 100 mm long as required, Cabinet etc complete all as specified /Manufacturer\"s specification and directed . |
| 22 | S&F 35mm thick factory made 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc (divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded, fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge. Size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-Iincluding two coats of synthetic enamel paint over a coat of pink primercomplete all as specified & directed. |
| 23 | 35mm thick, 2nd class hardwood (Sal/ Hollock) factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats,including two coats of synthetic enamel paint over a coat of pink primercomplete all as specified & directed. |
| 24 | S&F Factory made single extruded WPC (Wood Polymer Composite) prefinished solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant, fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length finished the surface with UV coating completeall as specified and directed.Note: (i) For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (ii) Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 25 | Providing and fixing factory made single extrudedWPC(Wood Polymer Composite) solid prefinished with CNC cutting flush door shutter of size 30mm thick comprsising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A caategory with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to befinished with UV coatingapproved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all S.S. screws shall be paid separately |
| 26 | S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 27 | S&F 200 mm long aluminiumanodized barrel tower bolts of extruded section (as per sample) fixed complete all as specified and directed. |
| 28 | S&F 150 mm size aluminium alloy handles, fabricated type extruded section(as per sample), complete all as specified and directed. |
| 29 | S&F for 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed |
| 30 | S&F of mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with stainless steel wire staples complete all as specified and directed. |
| 31 | M&L for 3 mm thick plain glass ordinary quality and fixing and glazing with oil putty/ nails wire in wooden/ steel frame complete all as specified and directed |
| 32 | 3mm thick Figured glass, pin head type and glazing with oil puttyin squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 33 | Pre-painted galvalume aluminium zinc coating GIbased Plain steel sheet 0.50 mm thick of anycolour having tensile strength of 550 Mps as in ridges, hips, valley gitters, drip and straight flashings, fixed with self tapping screws as specified and directed. |
| 34 | Pre-painted galvalume aluminium zinc coating GIbased corrugated steel sheet 0.50 mm thick of anycolour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed. |
| 35 | M&L for Brick work with fly ash bricks (Old Size bricks), sub class\"B\" bricksstraight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & directed. |
| 36 | All as per item item No 34 but except bricks. |
| 37 | M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 38 | M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement including preparation on new plastered surface of walls, applying 2mm thick wall care putty to desired even and smooth and levelled surfaces and applying two coats of distemper oil bound distemper over a coat of primercomplete all as specified and directed. |
| 39 | 5mm thick rendering on concrete surface of ceiling in CM 1:3 finishing the surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 40 | M&L for Rendering 15mm thick on fair faces of brick work, concrete sruface in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed. |
| 41 | M&L for rendering 15 mm thick cemet plster on fair faces of brick work or concrte surfacesin CM 1:4 in two layers(5mm finishing layer over 10mm base layer) finished even and surface without using extra cemen with WPC as per manufacturer\"s instructions including preparing new plastered surface wall and applying two coats of exterior weather proof paint (Apex) over primer on external surface, complete all as specified and directed. |
| 42 | M&L for preparation of new plastered surface of external wall and chajjas,making surface smooth using sand paper, priming the surface with alkali resistance primer paintfor external surface, applying two coats of cement base paint including curing complete all as specified & directed. |
| 43 | M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed. |
| 44 | M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 45 | M&L for preparation of new plastered surface of internal walls and applying two coats of oil bound distemper paint including curing complete all as specified and directed. |
| 46 | M&L for PCC type C-1, 1:3:6 (using 20mm graded crushedstone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 47 | M&L for preparation old steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed. |
| 48 | S&F in repairs soap dish stainless steel chromium plated fixed with brass screws and rawlplyg complete all as specified and directed. |
| 49 | S&F in repair stainless steel shelf assembly 60cm long complete all as specified and directed. |
| 50 | S&F in repairs CPgrating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified and directed. |
| 51 | S&F in repair PVC waste pipe 32 mm dia for wash hand basin and urinal length not not less than 1.5M (as per sample) complete all as specified and directed. |
| 52 | S&F in repair towel rail, brass, CP 600 mm long 15mm dia pipe of 1mm thick complete all as specified and directed. |
| 53 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 54 | S&F Aluminium wardrobe hooks of 6 no each (as per sample) fixed to wall complete all as specified & directed. |
| 55 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Overall length of cover plate 150mm, fixed in floor complete all as specified & directed. |
| 56 | M&L for rolled mild steel work as in framing for coller stand, cladding, glazing and the like fixed with angle cleats and connecting plates, conforming to Fe 410-W (Gde-E-250 Quality-A)complete all as specified and directed. |
| 57 | S&F in repair over head shower rose 125mm size (square/circular as per sample) for 15mm bore pipe, cast copper alloy, chromiumplated with or without swivel joint, any size including fixing to steel pipe or union complete all as specified & directed. |
| 58 | M&L for non skid glazed ceramic coloured tiles 8 to 10 mm thick area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqm as in flooretc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 15mm thick screed bed or bedding layer of mortar in CM 1:6complete all as specified and directed. |
| 59 | M&L for non skid glazed ceramic coloured tiles 8 to 10 mm thick area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqmin skirting/dado rises of steps etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 10mm thick screed bed or bedding layer of mortar in CM 1:4complete all as specified and directed. |
| 60 | M&L for non skid ceramic coloured tiles 8 to 10 mm thickof size 300x300 Sqm in floors etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 15mm thick screed bed or bedding layer of mortar in CM 1:6complete all as specified and directed. |
| 61 | M&L for25mm thick PCC type B-1, 1:2:4 ( using 20mm graded crushedstone aggregate) as in sub floors for laying floor finish complete all as specified and directed. |
| 62 | M&Lskid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqmin floor, skirting/dado or verticle surface etc set and jointed in neat cement slurry and pointed in coloured cementover 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed. |
| 63 | M&L for glazed ceramic coloured tiles in vertical surface 6000x300x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed . |
| 64 | M&L false ceiling of 7mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down of existing false ceiling with grid work of any description and removal complete all as specified and directed.Make: M/s Saint Gobain or equivalent of Armstong/Everest |
| 65 | S&F15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. |
| 66 | M&L for cutting chases, pinning in brick work,making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed. |
| 67 | S&F in repair20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. |
| 68 | S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch lever handle screwed both ends for iron pipe 15mm bore dia fixed in repair, complete all as specified and directed. |
| 69 | S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed. |
| 70 | S&F in repair15mm bore dia Bib taps, cast copper alloy, chromium plated fancy typeISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed. |
| 71 | S&F in repair 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 72 | S&F in rpairsVitreous china wash down water closetPtrap pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof),including making connections to trap, and to flush pipe including plastic seat and cover with stainless steel or aluminised hinging device and fixed complete all as specified and directed. |
| 73 | S&F in repair vitreous china, squatting Pan \"Orissa\" pattern \"white\" size 580mm x 440mm white with integral footrest including provision of lean concrete bedding, connection to drain out pipe, flush pipe and anti syphonage pipe etc, making good to floor where required complete all as specified & directed. |
| 74 | S&Fin repairs Vitreous china wash hand basin, white flat back, size 550 x 400 mm (as per sample), including brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting standincluding 32 mm diawaste pipe complete all as specified and directed. |
| 75 | S&F in repair25mm bore stainless steel, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed. |
| 76 | M&L for Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) two layers, Capacity 1000 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank of any type, description and removal beyond MOD landcomplete all as specified and directed. |
| 77 | S&F in repair 20mm bore dia gun metal globe or gate valves (as per sample) cast copper alloy chromium plated fancy type,ISI marked with crutch or butter fly handleswith iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified and directed |
| 78 | S&F in repair Cast iron soil, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, fixed to walls with all fittings including taking down unservicable pipe with fittings complete all as specified and directed |
| 79 | S&F in repairs 100mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured)complete all as specified and directed. |
| 80 | S&F in repair cast iron 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors complete all as specified and directed. |
| 81 | S&F in repair Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, fixed to walls with all fittings including taking down unservicable pipe with fittings complete all as specified and directed |
| 82 | S&F75 mm boreCast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 83 | S&F in repair cast iron 75mm bore Cast Iron Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors, fixed in repair complete all as specified and directed. |
| 84 | S&F in repair CI floor trap 100mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed. |
| 85 | S&FCast iron cowl of 50mm bore complete all as specified and directed. |
| 86 | M&L for complete removal of existing treatmenton wall by scraping, sand papering or by using mechanical sander and prepairng plastered surfaces and apploing two coats of oil emulsion distemper of approved tint of walls by using roller/ spray complete all as specified and as directed. |
| 87 | M&L for complete removal of existing treatmenton wall by scraping, sand papering or by using mechanical sander and prepairng plastered surfaces and apploing two coats of cement base paint of approved tint of walls by using roller/ spray complete all as specified and as directed. |
| 88 | M&L for complete removal of existing treatmenton Ceilingby scraping, sand papering or by using mechanical sander and prepairng plastered surfaces and apploing two coats of white washof approved tint of walls by using roller/ spray complete all as specified and as directed. |
| 89 | M&L for complete removal of existing treatmenton wallby scraping, sand papering or by using mechanical sander and prepairng plastered surfaces and apploing two coats of white washof approved tint of walls by using roller/ spray complete all as specified and as directed. |
| 90 | Supply only liquid water proofing compoundcomplete all as specified and directed. |
| 91 | M&L for 25mm thick PCC 1:2:4 type B-0 ( using 12.5mm graded crushedstone aggregate) padding as roof mixed with WPC as per manufacturer\"s instruction, surface finished even and smooth without using extra cement complete all as specified and directed.Note: WPC shall be measured and paid for separately. |
| 92 | M&L forPCC 1:2:4 Type B1 (using 20 mm graded crushedstone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, benching, copings, kneelers, apex stones, bed plates, kerbs , fillet, gola, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed |
| 93 | M&L for PCC 1:3:6 type C-2 using (40mm graded crushedstone aggregate) as in sub base finished complete all as specified and directed. |
| 94 | M&L for 60mm thickness M-35 grade Machine pressed precast concrete factory made interlockingpaver block confirming to IS-15658-2006 (topping thickness not less than 5mm thick with white cement and colour pigment non fadable epoxy coating) complete all as specified & directed. |
| 95 | M&L forPCC 1:2:4 Type B1 (using 20 mm graded crushedstone aggregate) as in roof kerbs or mud stops,benching, rounded or chamfered on edges, securing edges or interlocking tiles complete all as specified and directed |
| 96 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as inbeams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified & directed. |
| 97 | M&L forSand filling under floors or in foundations including watering and consolidationand all as specified complete all as specified and directed. |
| 98 | M&L cement concrete 1:2:4 type B1 (using 20mm graded crushedstone aggregate) for securing edges complete all as specified and directed |
| 99 | M&L for preparation old steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed. |
| 100 | Dismantling of rolled mild steel as in trusses, tubular purlins, rafters etc and refixing of purlins, rafters or trusses including necessary cleats etc. including two coats of synthetic enamel paint after preparation of old steel surface complete all as specified and as directed. |
| 101 | S&Ffor rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 gradeSt.-240 complete all as specified & directed. |
| 102 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long (dia of shank 11-15mm) complete all as specified and directed. |
| 103 | M&L for rolled mild steel section in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250 Quality-A)complete all as specified and directed. |
| 104 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide, rough finished surfaces of concrete complete all as specified and directed |
| 105 | S&F Mild steelTMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 106 | S&F Mild steelTMT bars5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 107 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixturesuch as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc with cement moratr and finishers to match existing surface complete all as specified and directed. |
| 108 | M&L for point wiringusing 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with and including 1.2mm thick GI/MS pressed steel sunken box of required size with 3mm thick plastic laminated sheet cover fixed with brass screws including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. Note:- 1) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible.2) Rate of supplying and fixing GI/MS pressed steel sunken box of required size with 3mm thick plastic laminated sheet cover shall deemed to be included in the quoted rates. |
| 109 | All as per Ser item No 107 but for one5/6 Amp socket outlet point on same board controlled by one switch. |
| 110 | All as per Ser item No 107 but for one5/6 Amp socket outlet points on independentboard controlled by one switch. |
| 111 | All as per Srl item No 107 here-in-before for one 5/6 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor. |
| 112 | All as per Ser item No 107 but for one light point controlled bytwo 2 way switch. |
| 113 | S&F switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed. |
| 114 | S&F socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type, 240 volts complete all as specified and as directed. |
| 115 | S&F socket outlet 2 in 1, 6 pin, 6/16 Amp flush type, 240 volts complete all as specified and as directed. |
| 116 | S&F switch 15/16 Amps, flush type, 240 volts complete all as specified and as directed. |
| 117 | S&F switch piano flush button single pole two way 16 Amp 240 volts complete all as specified and as directed. |
| 118 | S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals. |
| 119 | S&F stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and directed. |
| 120 | S&FLamp holder jumbo modular type, PVC/Polycarbonate type with back plate suitable for batten fitting including 15 Watt LED lamp complete all as specified. |
| 121 | M & L for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 25mm dia 1.5mm thickwith all accessories incl cutting chases on wall andmaking good to the disturbed surface of wall/floor with cement mortar 1:4 and finishes to match existing surface complete all as specified and directed. |
| 122 | Disconneting & taking down ceiling fan / exhaust fan any type/ cap refixing to the same/other location after replacing rubber reel, fixing bolts and nuts with lock pins, connectors complete all as specified and directed. |
| 123 | Disconneting & taking down geyser any type/capacity complete,refixing to the same/other location with all connected accessories afer cleaning replacing anchor bolts complete all as specified and directed. |
| 124 | S&F 20W surface / wall mounted box type batten LED fitting having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 125 | All as per ser item No 123 but for 10 W LED batten fitting 2 feet long. |
| 126 | S&Fsurface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protectioncomplete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 127 | S&F distribution board iron clad, double door with IP-43 1K-09 protection suitablefor MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 4 pole 415 V, 100 Amps, 16 kA of the same make as of distribution board, with MCBs i.e. DP 63A-04 Nos and SP 6 to 32 A-4 Nos of required size making connection with suitable size thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface in CM 1:4 to match the surface as per existing complete all as specified and directed. |
| 128 | MCB DB, SPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wallincluding cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 129 | S&F MCB SP 240V, 50Hz of rating6 to 32 Amp, \"B\" curve using suitable size copper thimbles complete all as specified and directed. |
| 130 | All as per Ser item No 128 but for size 40 Amps MCB SPN. |
| 131 | Supply, laying in trenches or fixing to wall/pole or passing through pipe and testing XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 Sqmm 4 core including making good all distributed wall surfaces/ flooring/tilling/road to match with existing specifications complete all as specified and directed. |
| 132 | All as item No 130 above but 16 Sqmm 2 core. |
| 133 | Excavation in trenches in any type of soil not exceeding 1.5 m wide and n.exc. 1.5 m deep and getting out for laying of cables , foundation flling of poles or stays complete all as specified and directed. |
| 134 | Returning filling, in including spreading , levelling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed. |
| 135 | Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 136 | M&L for sand filling in trenches as cushion to under ground cables 8 cm thick before laying the cable and 15 cm thick when cables are laid and tested complete all as specified and directed. Note: Only punned thickness i.e 18cm shall be measured and paid. |
| 137 | 40mm dia GI tubing, light grade with all fitting laid in trenches or fixed on wall/under road/ floor or pole by means of GI/MS clamps, nut bolts and washers complete all as specified and directed. |
| 138 | M&L for Sub class ‘B’ bricks old size laid dry, flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed. |
| 139 | S&F LED wall security lights of 35 Watthaving pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W,IP65 protection, IK07 rating,inbuilt electronic driver withPF>0.95 incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. |
| 140 | M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit alongwith angel iron 40x40x3mm frame and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 3 of SSR part I 1991 or directedand testing on completion. |
