|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: EXECUTIVE ENGINEER R AND B DIVISION AWANTIPORA. Name of Work: Construction of ZPEO Office Tral. Contract No:- 122/EEA/R&B of 2025-26/6723-33 Dated: 14 -11-2025 (Advertised Cost : 54.18 Lacs including cost of GST) MH:4202-YSS Capex Budget-2025-26 AAA: District Youth Services & sports officer Pulwama Vide order No: 01-DYSSO of 2025 dated 28.08.2025. and TS No: 188-SE/PS of 2025-26 Dated: 11.11.2025. Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil : |
| 3 | Providing and laying of dry stone soiling dully tightly hand packed including carriage of stone soling with loading unloading and stacking complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: : Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: :Lintel, beams, plinth beams, girders, bressumers and cantilevers . |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: : Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : ( 1 cement : 4 coarse sand) |
| 15 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : ( 1 cement : 4 coarse sand) i/c extra for brick work in superstructure above plinth level upto floor five level |
| 16 | 15mm Cement plaster on the rough side of single or half brick wall ofmix: 1 :4 ( 1 cement : 4 fine sand) |
| 17 | 12mm Cement plaster of mix:1 : 4 (1 cement : 4 fine sand) |
| 18 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand). |
| 19 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 21 | Finishing walls with textured exterior paint of required shade on Newwork (two or more coats applied @ 3.28 liter/10sqm) over and includingbase coat of exterior primer applied @ 2.20kg/10sqm |
| 22 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorptionless than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based highpolymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):2nd class kail wood |
| 25 | Providing and fixing glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.(second class kail wood 30mm thick) |
| 26 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood (30mm thick) |
| 27 | Providing and fixing glass panes along with beading windows, clerestory windows, all complete with : 4.0mm thick glass panes. |
| 28 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second kail wood 30mm. |
| 29 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work i/c cost of prime coat |
| 31 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 32 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 33 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 34 | Providing and fixing bright finished brass handles with screws etc. complete : 125mm |
| 35 | Providing and fixing bright finished brass handles with screws etc. complete : 100 mm |
| 36 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 100x10 mm |
| 37 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 250x10 mm |
| 38 | Providing and fixing bright finished brass hard drawn hooks and eyes 100 mm |
| 39 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. |
| 40 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 41 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps (01 Nos), 32 mm C.P. brass waste of standard pattern(01 Nos), including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous china wash basin size 550x400 mm with a pair of 15mm C.P. brass pillar taps. |
| 42 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 43 | Providing anf fixing brass bib cock of approved quality 15mm nominal bore |
| 44 | Providing and fixing 15 mm nomonal bore C.P brass angle value for basin mixer and geyser of approved make confirming to IS: 8931 |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 19.3.1 Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing. |
| 46 | 32mm nominal outer dia pipes. |
| 47 | 40mm nominal outer dia pipes. |
| 48 | Providing, Fixing, Testing & Commissioning uPVC SWR pipes (Type-B) for soil, waste and vent conforming to IS 13592 along with all required fittings like tees, bends, cowls, crosses with or without access doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in R.C.C/brick work (slab/beam/wall) and making good the floors, beams and walls with cement mortar where required complete of outer diameter.(Soil/ Waste pipe) (PRINCE ISI MARK) |
| 49 | 100 mm dia |
| 50 | 75 mm dia |
| 51 | Providing and fixing uplasticised PVC connection pipe with brassunions : 45 cm length15 mm nominal bore |
| 52 | Providing and fixing of 50 litre gyser of approved make and quality, Recold, Venus, V guard or of equal make. |
| 53 | Providing and fixing health faucet with hose pipe for european water closet complete in all respect of approved quality (HINDWARE) |
| 54 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 55 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III): 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as perstandard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 |
| 56 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 57 | Wood work in frames of false ceiling/partition sawn and fixed in position with budloo /fir wood |
| 58 | P/F of 12 mm thick budloo wood plain panelling with cornice / all fittings and fixtures incl sprit polishing complete and as directed by EIC. |
| 59 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 60 | Carriage of all material from source to site of work by Mech. Transport. |
| 61 | a) Stone Aggregate for an average lead of 15kms |
| 62 | b) Sand for an average lead of 15kms |
| 63 | c) Bricks |
| 64 | Electrification |
| 65 | Wiring for light point/ fan point/exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC Insulated copper conductor ( Havell/Polycab/ paraflex/ Anchor/eq. standard make as desired by engineer Incharge) single core cable in surface / recessed medium class PVC conduit, with modular switch (Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia ABB Tvisha make.), modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 66 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire, FRLS PVC Insulated copper conductor (Havell/Polycab/paraflex/Anchor/ equivalent as directed by engineer Incharge.) single core cable in surface/recessed medium class PVC conduit. |
| 67 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, Including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, modular plate, suitable Gl box, connections etc. as required. Modular Switch & Socket:- (Anchor roma plus/Legrand Mylinc/SSK NV/schneider Leiva /ABB Tvisha make make.) |
| 68 | Wiring for lighting circuits/6-10 amp power plugwith 2X2.5 sq. mm FRLS PVC Insulated copper conductor (Havell/Polycab/Fenolex/Anchor/ equivalent as directed by engineer Incharge.) single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required. |
| 69 | Supplying and fixing suitable size Gl box with modular plate and cover In front on surface or in recess, Including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- (Anchor roma plus/Legrand Mylinc/SSK NV/schnelder Livia /ABB Tvisha make.) |
| 70 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, Including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 71 | Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP M.C.B, \"C\" curve including connections, painting etc. as required. |
| 72 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Polycab/ paraflex/ Anchor/ equivalent as directed by engineer Incharge.), single core cable in surface/ recessed medium class PVC conduit as seoulred |
| 73 | (a) 2 X6 sq. mm 1X6 sq.mm earth wire |
| 74 | (b)2 x 10 sq. rnın 1 X 6 sq. mm earth wire |
| 75 | Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall nutty paint complete |
| 76 | Providing and fixing of 6-16mm Cu thimbles duly cramped at cable ends. |
| 77 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 78 | Supply Installation testing and commissioning of Indicator of Anchor roma plus/Legrand Mylinc/SSK NV/schneider Livia/Crabtree athena make.) |
| 79 | Sub Head-2-Fixtures and Fittings |
| 80 | Supply installation testing and commissioning of 15 W+ LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Housing and Heat Sink and P.F.>0.95 THD<10%, CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V. The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which Includes replacement of fixtures of Helonix/Havell/ Wipro make /sample to be approved before installation.. |
| 81 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canoples, shackle kit, Power Factor not less than 0.9, Service Value Including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), Insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and Including Iron hook complete. USHA/orient/Crompton make (Project series, sample to be approved before installation) |
| 82 | Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor roma plus/Legrand Mylinc/ABB Tivsha/schneider Livia/Havell Coral make. |
| 83 | Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/window as per site requirement and necessary connections. |
| 84 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, (Havell/ legrand/Shinider/SSK make) 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) |
| 85 | 2+14 way, Double door |
| 86 | S/F testing and comm. Of MCB\"s 10 K of the below mentioned capacitles in sub main controls Legrand C curve/ Schinider/ ABB equivalent make as directed by engineer In charge. |
| 87 | a) 6-32 Amp SP MCB |
| 88 | b) 40-63amp DP MCB |
| 89 | Providing of Chemical earthing as per IS standards by way of digging 10\" deep pit then embedding 3 meter G.I Earthing electrode, 80mm dia. connecting the plate with main control board by8- 10 SWG G.I wire with 1/2\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. |
| 90 | S/L, testing and commissioning of PVC XLPE insulated alluminium armoured cable 650 V/1100 V Grade as per 15 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer Incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 91 | c)25 sq.mm 2 core |
| 92 | Supplying, Installation, Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683) suitable for \"B\" and \"C\" class fires - Inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical |
| 93 | Supply installation testing and comm. of flood light 50 W (warm, white), Epoxy powder coated dle-cast aluminiurn housing (LM24) with elegantly designed heat sink for efflclent thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07,, with high power LED\"s as light source with Built-In Potted IP67 electronic LED driver with APFC, lower THD, toughned glass and secondary lens, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Bullt in SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell (JETA QUANTO PLUS MONO 50 W) /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 94 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel. floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle Iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears,, Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required. As per approved design,size may vary as per site requirement |
| 95 | Providing and fixing of following protection equipments and other allied accessories including connections, Inter connections, with suitable size of PVC Insulated copper conductor cable including learthine etc. as required. |
| 96 | Normal INCOMING: |
| 97 | a) 125A 2P MCCB 25 KA Including spreader links Including spreader links, Icu=ics=100% (Adjustable thermal and Adjustable magnetic release) Legrand/Shinider/Semiens/ABB make. |
| 98 | b) 2 No. of Aluminium Bus Bar of 200 Amp. |
| 99 | c) Digital meters and phase Indicators -1 sel. |
| 100 | d) onload Change over switch 63 Amp for generator. Front operated. |
| 101 | e) 2 No. of Aluminium Bus Bar of 100 Amp. |
| 102 | c)Digital meters and phase Indicators -1 set. |
| 103 | Inverter Incommer |
| 104 | (a) 100 amp DP MCB 10K Legrand/Shinider/Semiens/ABB make. |
| 105 | (b) 100 Amp 2 strip bus bar |
| 106 | c) Digital meters and phase Indicators -1 set. |
| 107 | OUTGOING: |
| 108 | c) 40-63amp DP MCB |
| 109 | c) space for 12 way MCB\"s |
| 110 | Supply installation testing and comm. of Invertor battery 150 AH/12 V Exide invatubular/ eq. standard make as directed by engineer incharge. |
| 111 | Supply installation testing and commissioning of Sine Wave Inverter, Capacity 1400-1600VA,,Supporting 2 no. battery, 24 Month Warranty Safe for sensitive appliances with Sine wave out-put, Auto over-load handling capacity Installation and maintenance friendly Offers high quality and rellable power back-up solution for office and homes, MCB for protection from Input mains, Bypass switch for supplying output directly from grid in case of Home UPS fault. Noiseless Operations with the help of low harmonic distortion, Intuitive Display to easily understand status of mains avallability, battery status, etc.Comprehensive protection against short-circuit, reverse polarity, battery over-charge, deep-discharge etc.Adaptive Battery charging control system technology (ABCC) ensures faster battery charging and enhances battery life by around 70%. Supports a wide battery range, l.e. Flat Plate, Tubular & VRLA (SMF).praffered make Luminous/ Microtek/Exide make. The job also includes the PVC Trollies suitale to hold 2 No. Battery and the inverter. ( Complete job) Total in Figures 5417724.875 5417724.875 INR Fifty Four Lakh Seventeen Thousand Seven Hundred & Twenty Four and Paise Eighty Eight Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
