|
| 1 | Supply and filling Good earth including digging earth carrying by lorry, placing , wateringdressing and ramming in layers not over 200 mm thick and consolidation with RRR of 8-10 capacity including complete job. |
| 2 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 4 | Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and hades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 600x600mm |
| 5 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.Pbrasscouplingcomplete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: Range of two squatting plates with 10 liter P.V.C. automatic flushing cistern. |
| 6 | Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead |
| 7 | Providing and fixing a counter-type wash basin of approved make and design (white vitreous china) mounted on a polished granite counter slab (min. 18 mm thick), including cutting the slab for the opening, fixing the basin with C.P. brass screws and nuts, providing and fixing a single-hole or pillar-type C.P. brass mixer/tap, bottle trap, 32 mm C.P. brass waste with C.P. brass chain & rubber plug, complete with G.I./CPVC inlet connections, PVC waste pipe, necessary supports/brackets, cutting and making good of site finishing, testing, and all incidental works as per specification and Engineer-in-charge’s direction. |
| 8 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 9 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 10 | Providing and fixing CP brass Soap dish/tray of approved brand and manufacture complete job |
| 11 | Providing and fixing 15 mm nominal bore C.P. brass Wall Mixer/basin mixer of approved brand (JAQUAR ) and manufacture including all fittings and fixtures, complete job |
| 12 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 13 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete on concrete work |
| 14 | Providing and fixing tooth brush holder of approved brand and manufacture as per directions of EIC complete job |
| 15 | Supply and installation of Superior quality 100 W LED Flood light with high luminous glass screeen ,unbreakable cover and anti theft arrangement including double core service cable and all fitting and fixtures (MCBs,Control panel etc. Please Enable Macros to View BoQ information |
