|
| 1 | M & L for Modular brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 Incl Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 2 | M & L for cutting grooves in brick wall, 75 mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed |
| 3 | M & L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges of any thichness etc. complete all as specified and directed. |
| 4 | M&L for rendering 15 mm thick in cement mortar 1:6 onfair face of brick work of walls, finished even & smooth without using extra cement Incl Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water complete all as specified and directed |
| 5 | M&L for rendering 15 mm thick in cement mortar 1:4 onfair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. incl mouldings, chamfers, splay srounded or coved angles, beads,grooves and rebate upto 10 cm in width or 15 cm in girth Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water complete all as specified and directedNote : - Supply only water proofing compound shall be measured and paid for separately. |
| 6 | Supply only integral water proofing compound, ISI Marked complete all as specified and directed |
| 7 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade overa coat ofchalk whiting complete all as specified and directed |
| 8 | M&L for preparation of Old plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade complete all as specified and directed |
| 9 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coats of with alkali resistant priming paint complete all as specified and directed |
| 10 | M&L for preparation of old plastered surfaces of walls and applying one coats of cement base paint complete all as specified and directed |
| 11 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.incl brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed |
| 12 | M&L for non skid ceramictiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed. |
| 13 | M&L for glazed ceramic tiles (coloured) 600x450x7mm/ 300x600 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4 incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed. |
| 14 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick screed bed bedding layer in CM 1:6 including grinding,cutting, rubbing and mirror polishing complete all as specified and directed |
| 15 | M&L Machine cut kota stone slab flooring 20-25mm thick as in riser of steps, skirting, dado and pillar andjointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 15 mm thick screed bed bedding layer in CM 1:4 including grinding,cutting, rubbing and mirror polishing complete all as specified and directed |
| 16 | M&L Marble tiles 30cmx20cm x20mm thick machine cut, bedded jointed and pointed with grey cement slurry and laid over 20 mm thick screed bedding layer in CM 1:6 including cutting,grinding and polishing complete all as specified and directed |
| 17 | M & L Machine cut cudappah stoneslab 20-25mm thick over cementscreed base, laid and jointedwith grey cement slurry mixedwith pigment to match the shadeof the slab including rubbingand polishing complete 15mm thick screed bed in CM 1:4 including cutting, polishing & rubbing and including rounding of exposed edges incl Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and direceted. |
| 18 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, andother similar situations complete all as specified and directed |
| 19 | M & L for drilling through holes in granite stone for pipes etc not exc. 25 mm dia complete all as specified and directed |
| 20 | S & F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified anddirected. |
| 21 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as inplinth protection surface finished fair and even without using etra cementincl Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level complete all as specified and directed |
| 22 | M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed |
| 23 | M & L for GI tubing 15mm dia, medium grade, galvanised with all fittingsfixed to wall,trenches and floor incl Taking up or down steel water tubing and connections complete all as specified and directed |
| 24 | M & L for GI tubing 20mm dia, medium grade, galvanised with all fittingsfixed to wall,trenches and floor incl Taking up or down steel water tubing and connections complete all as specified and directed |
| 25 | S&F in repairvitrious China squatting pan orissa pattern size 580x440mm white with P or S trap and making good floor complete all as specified and directed |
| 26 | S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle complete all as specified and directed |
| 27 | S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed |
| 28 | S & F in repairfor CP Pillar taps fancy type15mm brass with capsten head chromium plated, screwed down high pressure with or without lettred \"hot or cold\" water long screwed both ends for iron pipe complete all as specified and directed. |
| 29 | S&F PTMT grating 125mm dia without waste hole (Minimium weight 40 grams) complete all as specified and directed |
| 30 | S&F in repairPVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides complete all as specified and directed |
| 31 | S & F in repairfor Bib taps 15mm bore, brass chromium plated, fancy type, screwed down high pressure with crutchor butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 32 | S&F in repairCP angle valve long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type complete all as specified and directed |
| 33 | S & F in repairfor CP stop/angle valves fancy type chromium plated 15mm bore brass, screwed down high pressure with crutch orbutterfly handle screwed both ends for iron pipes or for unioncomplete all as specified and directed. |
| 34 | S&F in repairsheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.complete all as specified and directed. |
| 35 | S&F in repair CP brass tubular towel rail,20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws complete all as specified and directed |
| 36 | S&F40mm borePVClow density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor complete all as specified and directed |
| 37 | S&F in repair bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial Ply wood backingfixed to wooden plugs with chromium plated brass screws and cup washer, complete all as specified and directed |
| 38 | S&F in repairbrass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed |
| 39 | S&Fin repairPVC(SWR) 75 mm bore floor trap plan with grating including jointing with solvant cement complete all as specified & as directed. |
| 40 | S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. incl Dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc complete all as specified and directed |
| 41 | S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed |
| 42 | S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and directed |
| 43 | S&F in repairgun metal gate valve screwed both ends to15mm bore pipe complete all as specified and directed |
| 44 | Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm/75mm bore pipe drain pipes,set in cement mortar including PCC haunching and bedding complete all as specified and directed |
| 45 | S&F 110mm bore PVC (SWR) pipessingle socketed in any length with rubber ring joints fixed to wall including PVC holding clamps,complete all as specified and directed |
| 46 | S&F 75mm bore PVC (SWR) pipessingle socketed in any length with rubber ring joints fixed to wall including PVC holding clamps complete all as specified and directed |
| 47 | S&F 110mm bore PVC (SWR) bend, any radius complete all as specified and directed |
| 48 | S&F 75mm bore PVC (SWR) bend, any radius complete all as specified and directed |
| 49 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 50 | S&F in repair PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed |
| 51 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed |
| 52 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqmeach, complete,all as specified & directed. |
| 53 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat offrame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant complete all as specified and directed |
| 54 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed Note: stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 55 | S&F 35 mm thick factoruy made wire mesh solid WPC pre laminated both side door shutter consisting of density 650 kg/cbm manufactured by an ISO-9001-2015certify company, Door to be panelled with ss mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. (conforming as per S:4020). The door should be water proof, termite proof,fire retradant and having screw holding capacity. Door to be fixed to framewirh 3 nos MS Powder coated butt hinges size 100 mm*25 mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the MS tube. other hardwares should be fixed with 19*6 mm size steel screws etc complete all as specified and directed |
| 56 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed |
| 57 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 58 | S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed |
| 59 | S&F 150 mm aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 60 | S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed |
| 61 | S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed |
| 62 | S&F 150mmFloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 63 | Supply and FixingSteel Box type Windows/Ventilators with both provisions ieglazed and gauzed doublepanel / single panel shutters, Gaused shutter shall be fixed in inner side and glazed shutter shall be fixed at outerside of the frame.The section of outer frameshall be 60 x 45 mm, F/S mullion/ transum 60x30x25 mm, F/S shutter frame 50x35x20mm, with handle and stopperof Z sec of size20 x 25x 20mm The section shall be made of ERW Section of 16 Gause. 02 Nos of Box type hinges 75 mm long 12 mm dia with one part of hinges spot weldedwith frame and other with shutter for each openable shutter. 04 Nos of flat ironfast shall be welded with each window.100 mm long handle and 150 mm long tower bolt shall be weldedto each openable shutter.10 mm square guard bar shall be provided @ 125mm c/c.Details shown in CELZDrawing No LZ/C-TD/130 SHEET NO 1/4to 4/4 .Note: Glass panes and wire mesh shall be measured and paid separately under schedule of items. |
| 64 | S&F 4.00mm Sheet glass,ordinary quality fixed to window in square n exc 0.5 sq. m in each pane complete all as specified and directed |
| 65 | S & F Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 66 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified. |
| 67 | M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified and directed. |
| 68 | M/L RCC 1:2:4 type B1 (using 20 mm graded aggrigate)as in slab,chajjas,beam incl Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works etc complete all as specified and directed |
| 69 | Formwork to chullah hoods, chajjas,troughs and similar items including edges complete all as specified and directed |
| 70 | Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc of rough finished surface of concrete complete all as specified and directed |
| 71 | M&L 8 to 10mm dia and over deformed bars, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding, rivetting etc complete all as specified and directed |
| 72 | S&F in repairPVC coated mild steel 25mm diapipe as in curtain rodsincluding brackets and fancy type end knobs complete all as specified and directed |
| 73 | S & Fin repair 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed. |
| 74 | S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open in 40 MM) complete all as specified and directed |
| 75 | S&F in repair40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed |
| 76 | S & F magnet catcher heavy duty for cupboard door shutter complete all as specified and directed. |
| 77 | M & L for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as benching/coping etc complete all as specified and directed. |
| 78 | S & F in repairs \"E\" board Everest make 600x600x4mm thick white prelaminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32 x 300mm and spaced at 1200mm centers securely fixed to the structural soffts by approved hangers at 1200mm, maximum centrers.Hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and jumper and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm centre to from 1200 x 600 mm modules cross tee longer than 600mm to be supported independently. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturer\"s instructions complete all as specified.and directed. |
| 79 | M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 80 | M&l Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 81 | M&L Rolled sections as in main and cross beams, hip and jackrafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates Fe 410 -W (Gde-E- 250) quality- A incl dismantlilng of existing wrought iron or mild steel work etc complete all as specified and directed |
| 82 | M&L 60mm thick rubber moulded glossy finish coloured interlocking precast PCC pavers any colour ofM-35 grade laid over 25mm thick sand cushioning and joint filled with fine sandincl levelling, tamping and sweeping etc incl dismantling stone slab and tiles of any description or and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified anddirected. |
| 83 | M&L construction of soakage well of size 3.0M dia x 4.50M effective depth with fly ash bircks and RCC M-25 design Mix using 20mm graded stone aggregate as in cover slab etc. including all required earthwork in soft/loose soil, returning filing and removal etc and filling of brick bats and cement concrete etc complete all as shown on CELZ drawing No TD/576 sheet 1/2 & 2/2 complete all as specified and directed.Note- Filling of earth/rubble as ramming in old broken soakage pit and disconnectionof inlet sewage line inclusive of this items. |
| 84 | Supply of 3mm dia GI wirechain link fencing with 75x75mm mesh size and fixed to anytype of strandard rails straining bolts etc including provision ofbinding wire complete all as specified and directed.Note: Weight constantant shall be detrmined by BOO of chain link fencing. |
| 85 | Fixing only chain link fencing including line wires, any mesh, size and type fixed to any type of standards rails, straining bolts, etc.including provission of binding wire complete all as specified and directed. |
| 86 | M & L for provision of rooftreatment using polymeric water proofing membarane including taking down existing treatment and removal of waste materials all as given below:-(a)Taking down existing water proofing treatment and removal of waste material retrieved to a distance nexc. 500m where directed.(b) M & L for Applying a coat ofbituminous primer to IS : 3384 -1986 @ 0.25 Ltrs/Sqm and allowed to dry.(c)M & L for Laying 3mm thick APP membarane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides withoverlaps 100mm and 150mm at longitudinal and transverse direction respectivelyand sealed by flame,sealing all overlaps complete including treatment at all junctions and corners.The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3.(d) M & L for two coats of Aluminium paint on membrane surface allas specified and directed. |
| 87 | S & Fstainless steel kitchen plate rack made out of not less than 0.8mm thick stainless steel sheet of size 750mm x 600mm x 250mm of approved pattern complete all as specified and directed. |
| 88 | S & Fjet spray with PVC pipe of superior quality complete all as specified and directed |
| 89 | S & F health faucetmild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexiblte tube and wall hook including making connections and fixed in position complete in all respect complete all as specified and directed. |
| 90 | S & F CP two-way stop/angle valves 15mm bore brass chromium plated, screwed down high pressure with castain head handle screwed both ends for iron pipes or for union complete all as specified and directed. |
| 91 | S & F plastic water closet seat cover white closed pattern/Anglo Indian pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 92 | Taking down carefullycopper/aluminium point wiring (light, fan, socket or power) complete with fitting such asswitches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface ofwalls and floors etc complete all as specified and directed |
| 93 | M & L for Point wiring complete with 1.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through rigid non metalic PVC conduit and conduit accesseries concealed in walls/ceiling, electrogalvanised pressed steel modular metal flush box 1/2 module to 8 moduleconcealed in wall duly painted with two coat ofblack bituminous paint over a coat of red oxide primer along with white cover plate with plate up to 12 modulefor housing modularswitches,and sockets 1.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly all as specified for :-(Modular frame and plates will paid seprately) |
| 94 | Ditto all as above item No -93 hereinbefore butbut socketoutlet point 5 amps on independent board complete all as specified and directed |
| 95 | Ditto all as above item No -93 hereinbefore but one socket outlet point on same baordcomplete all as specified and directed |
| 96 | Ditto all as above item No -93 hereinbefore but one bell point controlled by one, one way Switch complete all as specified and directed |
| 97 | M & L for Point wiring complete with 2.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through rigid non metalic PVC conduit and conduit accesseries concealed in walls/ceiling, electrogalvanised pressed steel modular metal flush box 1/2 module to 8 moduleconcealed in wall duly painted with two coat ofblack bituminous paint over a coat of red oxide primer along with white cover plate with plate up to 6 modulefor housing modularswitches,and sockets 2.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly all as specified for :-(Modular frame and plates will paid seprately) |
| 98 | S&F modular switch, single pole, 1 way 5/6 Amp, 230 Volts, 1 module complete all as specified and directed. |
| 99 | S&F modular switches single pole, 1 way 15/16A, 230 V,1 module complete all as specified and directed. |
| 100 | S&F modular socket, single pole, 5 pin 5/6 Amp, 230 Volts, combined 2 module complete all as specified and directed. |
| 101 | S&F modular socket, single pole, 5 pin 15/16 Amp, 230 Volts, combined 2 module complete all as specified and directed. |
| 102 | S&F Modular Bell push 6A 1 module complte all as specified and directed. |
| 103 | M&LCeiling rose, Pilot 3 Plate ceiling rose 6A complete all as specified and directed |
| 104 | S&F modular rotary step type fan regulator, single pole, 120 W, 2 module, complete all as specified and directed. |
| 105 | S&F modular white cover plate with frame, 3 module complete all as specified and directed. |
| 106 | S&F modular white cover plate with frame, 4 module complete all as specified and directed. |
| 107 | S&F modular white cover plate with frame, 6 module complete all as specified and directed. |
| 108 | S&F modular white cover plate with frame, 8 module complete all as specified and directed. |
| 109 | S&F sheet metal enclosures with socket plug top and MCBswith a two pin and earth plug and socket complete with one single pole MCB 20 Amps |
| 110 | S&F MCB single pole 10 to 32 Amp 240 volts 10 KA breakingcapacity complete all as specified and directed |
| 111 | Ditto asitem No 16 herein before but 40 Amp, 240 volts, single pole & neutral complete all as specified and directed |
| 112 | S&F sheet metal enclosure (MCB DB) single phase and neutral with 100/125 Amps rated bus bar 12 way double door type , 240 volts complete all as specified and directed |
| 113 | S&F sheet metal enclosure (MCB DB) single phase and neutral with 100/125 Amps rated bus bar 8 way double door type , 240 volts complete all as specified and directed |
| 114 | M&L for Sub main wiring with two single core PVC insulated cable with 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directedNote-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate |
| 115 | M&L for Sub main wiring with two single core PVC insulated cable with 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directedNote-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate |
| 116 | Supply and fixing wall mountedLED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 117 | Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver completeincluding Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed |
| 118 | S& FDecorative wall light fixturemade up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish,( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. (1 nos ofled bulb included in quoted rate ) |
| 119 | S&FLED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP66 and IK 07with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed |
| 120 | Taking down carefully ceiling/Exhaust fan of any size and type and refixing on same or new location after oiling, greasing, Paintingcomplete all as specified and directed |
| 121 | Supply and fix wall mounting fans 400 mm (white) string controlled oscillating type including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed . |
| 122 | Supply and lay cableXLPE insulated screenedPVC bedded, galvnisedsteel strip or wire armoured electric power cables (heavey duty ) 1100 Volts grade withstrandedaluminium conductor of size 10 Sqmm 2 core complete all as specified and directed |
| 123 | Excavation in trenches n exc 1.5m wide and n. exc 1.5m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out complete all as specified and directed |
| 124 | Returning filling including spreading leveling watering and well ramming in layers n. exc 25Cm complete all as specified and directed |
| 125 | Removal of excavated material/surplus soil to a distance n exc 50m and depositeing where directed at a level n exc 1.5 m above the strting point complete all as specified and directed |
| 126 | M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed |
| 127 | Supply & Laying sub class `B’ bricks old sizes over the LT cable laid flat for protection of cable complete all as specified and directed |
| 128 | M & Lof GI pipe medium grade of 40 mm dia base in trenches/poles/wallsfor protection of cable including fittings complete all as specified and directed |
| 129 | supply and fix junction box100 amp rated bus bar complete all as specified and directed |
| 130 | S & F water heaterstorage type electric BEE star ratedof capacity 25 ltrsto operate on 230 volt AC,vertical type including 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp capacity including disconnecting and taking down old unserviceable Geyser and deposited in AGE E/M (W) store yard for BER action complete all as specified and directed. |
