|
| 1 | M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified anddirected. |
| 2 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 3 | M&L for rendering 15mm thick in CM 1:6 on brick/ concretes on fair surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces mixed with @ 2% WPCby weight of cement. (WPC paid seperately) and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint in camouflaging pattern (sigma MK-III pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge. |
| 6 | M&L for complete removal of existing treatment from surfaces of RCC/stone/concrete/brick walls of any description including preparation of scraped surface by removing all depression by affixing 3 mm thick wall care putty and applying two coats of 100% Premium acrylic emulsion paint in camouflaging pattern (sigma MK-III pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and includingpriming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge. |
| 7 | M&L for complete removal of existing treatment on surface of wall and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 3 mm thick wall care putty, complete all as specified and directed. |
| 8 | M&L for preparing newly plastered surfaces of walls and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 3mm thick wall care putty, complete all as specified and directed. |
| 9 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners,Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories,area not exceeding 2.00 sqm each(Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 10 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm), sash. T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners-5mm thick glazing with selected quality glass,Area exceeding 1.00 Sqm but not exceeding 2.00 sqm each.(Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 11 | Supply and fixing factory made UPVC door frame made of UPVC Extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance + 1mm), with wall thickness 2.0mm (+ 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded.The hinge side vertical of the frames reinforced by galvanized M.S tube of size 19x19mm and 1mm (+ 0.1 mm) wall thicknes and 3 Nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per direction of Engineer-in-Charge. |
| 12 | Providing and fixing factory made UPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, fram (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners.Hardware:[casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes, 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose). |
| 13 | S&F 4.8mmthick sheet glass ,ordinary quality, sheet galss is ground or obscured or frosted on one side, size of each pane exc 0.50 Sqmand fixed to door/window shutter and partition wall by means of glazing clips rubber strips etc. complete all as specified and directed. |
| 14 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 15 | M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specifiedand directed. |
| 16 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specifiedand directed. |
| 17 | M&L for TMT bars 06 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specifiedand directed. |
| 18 | M&L for formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams, etc rough finished flat concrete surfaces, etc complete all as specifiedand directed. |
| 19 | M&L for Reinforced cement concrete type B1, 1:2:4, using 20mm graded stone aggregate (Nominal Mix) as in beams, cantilevers, bressummers,lintel beams, roof beams ,floor beam etc and finished conctrete surface flat complete all as specifiedand directed. |
| 20 | M&L for cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, fixing of holdfast, plinth courses , string courses, lacing courses parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, filled inside the frame, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specifiedand directed. |
| 21 | S&F tubular steel trusses including special shape washers etc. including forcolumns complete using ERW or induction butt welded tubesconfirming to IS- 1161-1979 grade St.-240 complete all as specified and directed. |
| 22 | S&Fpre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 23 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 24 | M& L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described , applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 25 | M& L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described , applying one coat of black bituminous paintcomplete all as specified and directed. |
| 26 | Supply and fixing GI snap grid frame work (Grid size 605cm x 605cm) for false ceilingconsisting of main runner \"T\" of size 24mm x 32mm and 0.3mm thick , Secondary runner \"T\" of size 24mmx25mm and 0.3mm thick,GI angle24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clipsincluding Gypsum ceiling tilesof size 595 x 595 x 4 mm laminated with 0.04 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap gridcomplete all as specified and directed by Engr-in- Charge. |
| 27 | S&F for mild steel flats for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and strutss in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165complete all as specified and directed. |
| 28 | M&L non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.18 Sqm but n exc 0.36 Sqmin floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 29 | M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes etc in cement Mortar 1:6 complete all as specified and directed. |
| 30 | M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVCconcealed conduit and its accessories including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, including steelbox of required module for modular switches/sockets all as specified and directed. Note:-Surface conduit shall be laid in ceiling portion only. |
| 31 | One light/fan/Bell point controlled by one switch. |
| 32 | One 3 pin 5 amps socket point on independent board |
| 33 | One 3 pin 5 amps socket point on same board |
| 34 | M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit and its accessories including one run of 2.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, including steelbox of required module for modular switches/socketsall as specified and directed by engr-in-charge. |
| 35 | M&L ceiling rose, 3 phase/PVC/polycarbonate, isolated body. |
| 36 | Supply and Fixing Modular switch 1 way 6A, 1 module. |
| 37 | Supply and Fixing Modular switch 1 way16A, 1 module |
| 38 | Supply and Fixing Modular Socket, 6A - 2/3 pin combined 2 module |
| 39 | Supply and Fixing Modular Socket, 6A/16A - 2/3 pin combined 2 module |
| 40 | All as per above Item No. 36 but 3 module |
| 41 | All as per above Item No. 36 but 4 module |
| 42 | All as per above Item No. 36 but 6 module |
| 43 | M&L for Submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLSPVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC concealed conduitand connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement. |
| 44 | S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 45 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete and connecting up with twin core twisted flexible copper conductor cable with suitable size taking down old fitting complete all as specified anddirected. |
| 46 | S & F Factory made distribution board in sheet metal enclosure in double door with 200A ratedbus bar, SPN 8 way, 240V for fixing MCB\"s complete all as specified and as directed. |
| 47 | S&F for MCB SPN ‘B’ Curve 10KA, 40 amps complete all as specified and directed. |
| 48 | S&F for MCB SP ‘B’ Curve 10KA, 5 to 32 amps complete all as specified and directed . |
| 49 | Supply and fixing LED street light fitting 35 Watt 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 50 | M & L Earthing complete with galvanised steel earth plate electrode 60cmX60cmX 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work charcoal dust, common salt, PCC 1:3:6type C-1 chamber with cover and RCC1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PGI funnel and wire mesh all as shown in electrical plate No 3 of SSR Part-I connected to ear thing test point all as specified or indicated including testing on completion all as directed by Engr-in-Charge. |
