|
| 1 | SCH \"A\" PART-I TO XIII:Note: These schedules are pre-priced by MES and the rate indicated under Col 5 signifies this fact only |
| 2 | Total amount of Sch ‘A’ Part I (Building & Structures) |
| 3 | Total amount of Sch ‘A’ Part II (Internal Water supply) |
| 4 | Total amount of Sch ‘A’ Part III (Internal Electric Supply) |
| 5 | Total amount of Sch \"A\" Part-IV (Road & Culverts) |
| 6 | Total amount of Sch ‘A’ Part V (Sewage Disposal) |
| 7 | Total amount of Sch ‘A’ Part VI (Area Drainage) |
| 8 | Total amount of Sch \"A\" Part-VII (Compound, Wall, Fencing and Gate) |
| 9 | Total amount of Sch \"A\" Part-VIII (External Water Supply) |
| 10 | Total amount of Sch \"A\" Part-IX (External Electric Supply) |
| 11 | Total amount of Sch \"A\" Part-X (Cooling Appliances) |
| 12 | Total amount of Sch \"A\" Part-XI (Hot Water Supply) |
| 13 | Total amount of Sch \"A\" Part-XII (Lightning Protection) |
| 14 | Total amount of Sch \"A\" Part-XIII( Site Clearance, Excavation and Earth Work) |
| 15 | SCHEDULE \"A\" PART-XIV (MISC B/R ANDE/M WORKS)Note: This schedule is not pre-priced by MES and the rate indicated as \"Rs 0.00\" under Col 5 signifies this fact only. |
| 16 | Supply only exhaust fan,flame proof single phase, heavy duty, metallic frame, 300 mm sweep, 1400 RPM including fixing of mounting frame in round hole cutting in wall, by means of rugged bolts, nuts and washers etc including three core copper conductor flexible cord of 0.5 Sqmm cross sectional area, of reqd length from ceiling rose to procelain connector block of the fan, complete with all accessories complete all as specified and directed. |
| 17 | S&F blanking plate made up of PVC complete all as specified and directed. |
| 18 | S&F TV single outlet with mounting blockall as specified and directed. |
| 19 | S&F telephone jack single with shutter socket with PVC mounting blockall as specified and directed. |
| 20 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element of 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, all as specified and directed. |
| 21 | S&F Gate valve or Globe valve 80 mm bore long body, class PN-1, cast iron body with flanged ends as per IS : 1538 (FF) and drilled with forged stainless steel spindle, non rising type and cast iron wheel head, IS: 14846 marked including neoprene rubber gasket, nuts, bolts, washers etc. and fixed in position complete all as specified and directed. |
| 22 | Supply and fix 150 mm diaPipe ductile Iron, S/S including specials Class \"K-9\"\" complete all as specified and directed. |
| 23 | Supply and fix 150 mm dia Valves, Sluice, flanged of class 1.6 PN complete all as specified and directed. |
| 24 | M&L Cutting to existing Cl pipe line upto 150 mm dia for taking connection up to 100 mm dia DI pipe including insertion of Cl Tee and jointing etc. complete all as specified and as directed. |
| 25 | M&L Fly ash brick masonry valve chamber of size as given hereunder (internal dimension) with 15 cm thick foundation of PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) over 15cm thick hardcore, 23cm thick brick wall built in cement and sand mortar (1 :4), 10 mm thick internal and external plaster including top of floor in cement and sand mortar 1 :3 finished even and smooth, without using extra cement, 5 mm thick MS sheet cover with, 40mm x 40mm x 6mm MS angle frame embedded in PCC 1 :2:4 type B-1 (using 20mm graded stone aggregate) coping having rectangular hinged opening of size with locking arrangements & handle made out of 16 mm dia MS round bar,25 mm x 6 mm hold fast for frame etc and applying one coat of red oxide primer and two coats of synthetic enamel, paint to all steel surface including complete excavation in any type of soil, refilling and earth work, disposal of surplus soil to a distance n.exc 50m complete all as specified and as directed. |
| 26 | 90 cm x 90 cm x 90 cm (height) |
| 27 | 90 cm x 90 cm x 60 cm (height) |
| 28 | 45 cm x 45 cm x 60 cm (height) |
| 29 | Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 75 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. |
| 30 | Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 50 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. |
| 31 | S&F New generation, post-top energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source of 25 watt. Make Havells Model- CORAL PT25WLED757PSYMTOPC or equivalent in Wipro/ Philips. |
| 32 | Supply and fix , test , commissioning of LT weather proof panel board powder coated in door type double door shutter, out door type made out of CRCA 3 mm thick outer and 1.6 mm thick for inner door confirming to IS 8623 with angle iron 50x50x6 mm outdoor, floor mounting type with closed bus bar, chamber and with aluminium bus bar of cap 400 Amp with necessary insulator suitable for 3 phase, 4 wire 50 HZAC supply as per CPRI approved including provn of digital ammeter 0-500A, digital voltameter 0-500Volts, CT\"s of suitable ratio,indicator lamps R-Y-B,selector switches and internal wiring including making PCC block type 0.6 Mtr above ground level grouting etc. all as specified and directed with the following work also includes provision of suitable size of cable glands, cable lugs,nut, bolts, washers etc. The bottom portion of enclosure shall be minimum 60 cm above ground level of legs of angle iron) |
| 33 | All as item No- 16.40 above but out door kiosk type consisting of following:a) Copper bus bar capacity 400 Amps for Phase-R-Y-B-3 Nos & 200 Amps for neutral-1 No b).MCCB 4 POLE 250 Amp ,36 KA- 01 No( I/C) c) MCCB 4 POLE 160 Amp, 36 KA- 02 Nos (O/G ) |
| 34 | All as item No- 16.40 above but out door kiosk type consisting of following:a) Aluminium bus bar capacity 300 Amps for Phase-R-Y-B-3 Nos & 200 Amps for neutral-1 No b) MCCB 4 pole 160 Amp, 36 KA- 1 No (I/C) c) MCCB 4 Pole 125 Amp, 36KA- 1 No (O/G) d) MCB TPN 63 Amps- 2 Nos (O/G) e) MCB SPN 32A-03 Nos (O/G) f) Astronomical timer digital-02 No g) MNX-32 contactor 32 Amps,3 Phase, 415 volt coil voltage-02 Nos |
| 35 | All as item No-16.40 above but out door kiosk type consisting of following:a) Copper bus bar capacity 300 Amps for Phase-R-Y-B-3 Nos & 200 Amps for neutral-1 NO b) MCBTPN 63 Amps-1 Nos (I/C)c) MCB SPN 32Amps- 06 Nos |
| 36 | All as item No-16.40 above but out door kiosk type consisting of following:a) Copper bus bar capacity 300 Amps for Phase-R-Y-B-3 Nos & 200 Amps for neutral-1 No b) MCCB 4 Pole 125 Amp, 36KA- 1 Nos (I/C)c) MCB TPN 63Amp-02Nos (O/G)d)MCB SPN 32Amps- 02 Nos |
| 37 | M&L for out door type bus bar chamber fabricated by MS sheet of size 3mm and mounted on MS angle iron frame suitable for 415 Volt 3 phase 4 wire AC supply comprising of Aluminium bus bar of capacity 200 Amps installed on epoxy insulators consisting of MCB TPN 63 Amps-01 No & MCB SPN -32 Amps-06 Nos. the bus bar chamber should be dust proof, vermi proof and made out of 3 mm CRCA sheet and mounted on 40x40x6mm angle iron door is front opening with locking arrangement duly powder coated including MS stand, making PCC block type 0.6 Mtr above ground level grouting etc, all as specified and directed. |
| 38 | S&F new Endura cityliner Neo 70 Watt LED Luminaries with high power LED as light source of 70W with10 KV built in surg protector, IP 66 protection and impact resistance of IK07 (suitable for pole/ bracket dia 54 mm) Make Havells Cat Part Num:- ENDURACITY LINERNEO SL 70W/ LED 757 PASYBOTG or Equivalent model in Wipro/ Philips/ Crompton. |
| 39 | Supply & fix Thermo plastic street light sintex box of size 280 X 170 X 130 mm Cat No GS-J B-2817 top Hinged (or equivalent make of National) with 4 way connector mounted on epoxy \"insulators for looping of cable for 3 Phase and 1 neutral fixed on pole with the help of MS nuts bolts and MS clamps-1 Nos of size 40 mm X 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box, complete all as specified and directed, |
| 40 | Supply & fix Thermo plastic street light sintex box of size 280 X 170 X 130 mm Cat No GS-J B-2817 top Hinged (or equivalent make of National) with MCB TPN 32 Amps for looping of cable for 3 Phase and 1 neutral fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40 mm X 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box. |
| 41 | M&L Cable Flexible 3 Core 1.0 Sqmm PVC Insulated with stranded copper conductor for connecting up the street light fitting, complete all as specified and directed. |
| 42 | M&L for bracket made out of Gl tubing 40 mm dia, light grade 1.5 mtr long including fixing with MS clamps -2 Nos made out of 50 mm wide 5mm thick flat iron with M.S nuts bolts 75 mm long 12 mm dia 4 Nos with flat washer (3mm thick) -02 No for each including painting with aluminium paint over one coat of red oxide primer to the M.S clamps & bracket etc complete. including 1.0 sqmm 3.0 core flexible Copper cable in PVC conduit from junction box to connecter of street light fitting |
| 43 | M&L Double Wall corrugated 200mm dia class SN8 HDPE pipeincluding necessary rings/socket/fittings, laid, jointing and testing confirming to IS-16098 complete all as specified and as directed. |
