|
| 1 | S&F 2nd class HW scantlings, clean sawn supplied and fixed, with and including dismantling existing u/s timber scantling framed work 40sq.cm and over section, in any position, complete all as specified and as directed. |
| 2 | Taking down & refixing in old or new position of 2nd class HW scantlings, clean sawn, with and including dismantling existing u/s timber scantling framed work 40sq.cm and over section, in any position, complete all as specified and as directed. |
| 3 | M&L for Preparing surface of wood and wood based materials, new or old, of any description and girthand treated with two coats of creosote oil, complete all as specified and as directed. |
| 4 | M&Lfor Cement concrete roofing tiles, rustic red colour, 420mm x 330mm size of 230 kg minimum breaking strength, double groove design, as in roofing, interlocking at side joints, laid dry, with and including dismantling u/s single layer MP tiles or similar tiles in roofing, removing rubbish off the premises, complete all as specified and as directed. |
| 5 | M&L for Cement concrete Rusted Red/Grey colour Ridge cap of size 360mmx207mm x 240mm, with and including 15mm thick in roofing bedded and jointed in cement mortar 1:6, with and including dismantling u/s MP tiles ridge cap, removing rubbish off the premises, complete all as specified and as directed. |
| 6 | S&F Mild Steel Corrugated Galvanised Steel Sheet 0.45mm thick of class 8, grade of zinc coating 275, as in roof covering / ridges, hips, fixed with screws, with and including dismantling u/s AC sheet roofing and removing rubbish off the premises, complete all as specified and as directed. |
| 7 | S&F Rolled Mild Steel as structural steel work as in tubular trusses, posts, rafters, struss and the like including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS-1161, complete all as specified and as directed. |
| 8 | M&L Framed brackets of angles or tees with web and flanges, cut to shape, drilled and counter sunk screws, including bending & welding etc., guesst plates, riviting etc., of each bracket not exc 10kg and similar work confirming to Fe-290, Gde E-165, complete all as specified and as directed. |
| 9 | M&L PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in eves filling between wall and sheet and mass concrete etc., with and including demolition of existing cement concrete of any description and in any position, complete all as specified. |
| 10 | Taking down shutters of any description of area n exc 1sqm each, complete all as specified and as directed. |
| 11 | Taking down shutters of any description of area exc 1sqm but not exc 2sqm each, complete all as specified and as directed. |
| 12 | Taking down shutters of any description of area exc 1sqm but not exc 2sqm each and re-fixing in the same opening, complete all as specified and as directed. |
| 13 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area exc 1.5sqm but n. exc. 4.0 sqm each, complete all as specified and as directed. |
| 14 | M&L forSecondclass hard woodplain solid straight chowkhat andframes, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints , complete all as specified and as directed |
| 15 | M&L forFactory made2nd class hard woodplain, framed, panelleddoor shutter 35mm thick, twopanels with lock rail and panels of 12mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) and fitted to Chowkats,complete all as specified and as directed. |
| 16 | M&L for Factory made 2nd class hard woodGlazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain, chamfered or rounded, mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 17 | M&L for Factory made 2nd class hardwood 30mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc for windows, ventilators for etc provided with stiles and rails anddivided into square with plain chamfered or rounded mitred andrebated sash bars any numberssize of members of shutters as specified in SSR Part-I Section 8 Clause 8.24(b) supplied and fitted to chowkats,complete all as specified and as directed. |
| 18 | M&L for 4mm thick sheet glass ordinary quality andglazing with oil putty in squares n exc 0.5 Sqm in each pane, complete all as specified and as directed. |
| 19 | S&F MS butt hingescold rolled medium weight 100mm size, ISI marked, complete all as specified andas directed. |
| 20 | S&F MS butt hingescold rolled medium weight 75mm size, ISI marked, complete all as specified andas directed. |
| 21 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specifiedand as directed. |
| 22 | S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete, complete all as specifiedand as directed. |
| 23 | S&F 150mm long extruded section aluminium alloy anodised handles fabricated type, complete all as specified and as directed. |
| 24 | S&F 100mm long extruded section aluminium alloy anodised handles fabricated type, complete all as specified and as directed. |
| 25 | S&F Aluminiumanodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified andall as directed. |
| 26 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed |
| 27 | S&F IN REPAIR Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed |
| 28 | M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 29 | M&L for False ceiling with High Pressure Steam Cured (HPSC) 4mm thick Non Asbestos Fibre Cement ceiling boards fixed with and including supply & fixing powder coated aluminium snap grid of size 605mmx605mm consisting of 25X25X1.25mm aluminium angles and TEEs of size 35x25x1.25mm with galvanised wire of required length and 6mm dia hanger grid suspended from trusses/ ceiling and purlins not exceeding 1200mm c/c both ways, with and including applying three coats of white wash on ceiling surface, with and including taking down existing u/s ceiling with frame work of any description, complete all as specified and as directed. |
| 30 | M&L for Solid PVC Wall Lining consisting of 5mm thick Single Side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, with and including taking down existing u/s wall lining of any description, complete all as specified and as directed. |
| 31 | S&F 5mm thick Single Side prelam PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame, complete all as specified and as directed. |
| 32 | M&L for Complete removal of existing treatment on old walls & cleaning with high pressure water jet pump and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, with and including preparation of old decorated surfaces of wall, complete all as specified and as directed. |
| 33 | M&L for Preparing old wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 34 | M&L for Preparation of new steel surfaces of any descriptionover 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 35 | M&L for applying two coats of Oil Bound Distemper over a coat of primer and a layer of 3mm thick wall care putty on walls with and including complete removal of existing treatment on wall with wire brush, scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots, filling holes & cracks with cement base putty and including preparation of old decorated surfaces of wall, complete all as specified and as directed. |
| 36 | S&FIN REPAIR PVC (SWR) eaves gutter 150mm dia trapezodial shape Gde-Ifixed with MS clamps, including taking down existing u/s eaves gutter pipes, rain water pipes(of any size or pattern) including fittings, head shoes, bends, swan neck etc., complete all as specified and as directed. |
| 37 | S&F IN REPAIR 110mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed. |
| 38 | M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed. |
| 39 | M&L for 10mm thick Rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finish the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 40 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and fair without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed. |
| 41 | M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces in two layers as 10mm thick in cement mortar 1:6 followed by 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer\"s instructions and finish the surface even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed. Note: Supply of WPC will be measured and paid separately. |
| 42 | Supply only Integral Water Proofing Compound. Make: Pidilite Industries Ltd Taloja / FOSROC / Dr Fixit / Asian paints |
| 43 | M&L for preparation of newly plastered surfaces of wall andapplying two coats of oil bound distemper over a coat of alkali resistant primer and 3mm thick wall case putty, complete all as specified and as directed. |
| 44 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with siliconadditives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including preparation of new plastered surfaces of any description, all as per manufacturer\"s instructions, complete all as specified and as directed. |
| 45 | Dismantling of existing two way Trellis work (Jafri), including taking as under of battens in trellis, complete all as specified. |
| 46 | S&F Structural Steel work with Rolled mild steel sections such as joist, beam, channel, angle, tee and similar work conforming to Fe-410-W (Gde- E-250) quality \"A\", fixed independently with or without connecting plates etc., cut to required lengths, complete all as specified and as directed. |
| 47 | S&F Welded steel wire fabric of weight not exceeding 4KG/SqM, cut to length, bent to shape, tying with and including annealed mild steel wire not less than 0.90mm dia or fixed with GI stapples, fixed to steel or wooden members, complete all as specified. |
| 48 | S&F Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165, with and including dismantling existing wrought iron or mild steel work of any description, complete all as specified and as directed. |
| 49 | M&L for 75mm thick plain cement concrete 1:3:6type C1 (using 20mm graded hard granite stone aggregate) as in plinth protection, finished even and fair without using extra cement including making construction joints in 3 mtres interval and joint filled with sealing compound, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 50 | M&L for Factory made Machine pressed pre-cast concrete interlocking paver block any shape and size with glossy finish on top, confirming to IS 15658-2006 of 60mm thick, M-35 grade with grey cement and no pigment, with and including 50mm thick river sand cushion under interlocking paver block with watering and consolidation, with and including demolition of existing floor tiles of any type, complete all as specified and as directed by the Engineer-in-Charge. |
| 51 | M&L for 50mm thick plain cement concrete 1:2:4type B1 (using 20mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 52 | M&L for Machine cut Kota stone slab 18-20mm thick, as in flooring over with and including 20mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match shade of the slab, including cutting, waste, grinding, rubbing and polishing, with and including demolition of existing floor tiles of any description, complete all as specified. |
| 53 | S&F Machine cut kota stone slab 18-20mm thick, as in vertical surfaces such as skirting/dado, laid over and including 15mm thick backing coat in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing, with and including demolition of existing skirting/dado, complete all as specifed and as directed. |
| 54 | M&L for Premium quality, joint free ceramic glazed coloured wall tiles of 7 to 8mm thick (square / rectangular) area of each tile not exceeding 0.18Sqm, on vertical surfaces such as dado and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over & including 10mm thick rendering in CM 1:3 and including taking down existing dado/skirting with backing mortar, complete all as specified. |
| 55 | M&L for Light Shade Coloured Vitrified Ceramic tiles 08mm to 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 56 | M&L for Premium quality, joint free coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 57 | S&F IN REPAIR Bib tap, PTMT of any colour, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed. |
| 58 | S&F IN REPAIR Brass shower rose of 15mm inlet and 100mm outlet, chromium plated with swivel joint, CP shower arm and CP flange of approved make and quality, fixed to 15mm bore dia pipe, complete all as specified and as directed. |
| 59 | S&F IN REPAIR PVC valveless, syphonic action type low level flushing cistern, 10 ltrs capacity, white with inlet ball valve, float and handle soft touch type including brackets, PVC flush pipe etc complete fixed with CP brass screws complete all as specified and as directed. |
| 60 | S&F PVC connection (high density) 15mm dia 600mm long with PTMT nuts both ends with rubber washer, complete all as specified and directed. |
| 61 | S&F 15mm outer dia, CPVC pipe SDR 11 with and including all CPVC SDR 11 fittings, fixed to walls/ceilings/ laid in floors, cutting chases as required at site and making good with CM 1:3, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed. |
| 62 | S&F 20mm outer dia, CPVC pipe SDR 11 with and including all CPVC SDR 11 fittings, fixed to walls/ceilings/ laid in floors, cutting chases as required at site and making good with CM 1:3, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed. |
| 63 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window Frame/ Chowkhat of size 45mm x 70mm with virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibbers (wood powder/ rice husk/ wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) with mitre joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, and fixed in position with andincluding MS hold fast/lugs/SS dash fasteners as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 64 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension rade), calcium carbonate and natural fibbers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant, complete all as directed by Engineer-in-Charge. |
| 65 | S&F Aluminium Composite Pannel board of 4mm thick, comprising of a core containing not less than 70% non combustible mineral filling, sandwiched between two skins of 0.50mm thick aluminium alloy PERALUMAN-100 of weight not less than 7.6kg/Sqm, with all sub structures, anchors, hardware and all fittings, fixed over and including aluminium section of size 35x25x2mm and 1.0m x 0.30m panel with and including necessary frame work, screwing & scaffolding, fixed with screws / nails, with and including dismantling existing u/s boarding of any description, complete all as specified. Note: Measurements shall be taken as flat as fixed without any allowance for laps. |
| 66 | M&L Mirror polishing on existing Kota stone flooring, where ever required to give high gloss mirror polish finish, complete all as specified and as directed. |
| 67 | M&L for Point wiring with 1.5 Sq.mm FRLSH PVC insulated unsheathed copper conductor cable, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn in and and including PVC concealed type rigid conduit (minimum 20mm) meadium grade, ISI marked with accessories, junction boxes, tees, terminal boxes, factory made PVC / Metal boxes with modular top cover plates with frame for switches / sockets etc., including one run of 1.5 Sq.mm single core FRLS PVC unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly, for one light / fan /bell point controlled by one way switch/MCB, including taking down old u/s point wiring of any type with fittings, complete all as specified and as directed. Note: Cutting chases and making good surfaces shall be included in the unit rate. |
| 68 | All as per Serial Item No. 67 here-in-before but for 3 pin 5/6Amp switch socket point, on same board, complete all as specified. |
| 69 | All as per Serial Item No.67 here-in-before but for 3 pin 5/6Amp switch socket point, on independent board, complete all as specified. |
| 70 | All as per Serial Item No. 67 here-in-before but with 2.5Sqmm copper conductor cable and 2.5 Sqmm cable as earth continuity conductor for 3 pin 6/16Amp switch socket point, on independent board, complete all as specified. |
| 71 | S&F Modular switch 1 way 5/6Amp, 1 Module, 240 Volts, complete all as specified and as directed. |
| 72 | S&F Modular switch 1 way 15/16A, 1 Module, 240 Volts, complete all as specified and as directed. |
| 73 | S&F Modular Socket, 5/6A, 2/3 pin combined , 2 module,240 Volts, complete all as specified and as directed. |
| 74 | S&F Modular Socket, 6A/16A, 2/3 pin combined multipurpose, 2 module, 240 Volts, complete all as specified and as directed. |
| 75 | S&F Ceiling rose, 3 terminals PVC/Polycarbonate, 3 phase, isolated body, complete all as specified and as directed. |
| 76 | S&F Modular Bell push, 5Amp, 230Volt, white, 1 Module, complete all as specified. |
| 77 | S&F Ding Dong type Calling Bell, 230Volt, AC, complete all as specified. |
| 78 | S&F IN REPAIR Lamp holder (Angle type) insulated body with back plate batten fitting with LED 9/10Watt lamp, PVC/Polycarbonate type with cord grip, suitable for any type of fitting, fixed as in repair, complete all as specified. |
| 79 | S&F IN REPAIR MCCB, 4pole, 63Amps, 415Volts, thermal magnetic, Ics=100% Icu, 16kA current rating conforming to IEC-60947-II along with spreader incl Phase Barreir to be fixed in distribution board, complete all as specified. |
| 80 | M&L for Circuit / Sub main wiring with Four runs of 6.0Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 6.0Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 25mm dia), concealed /surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit. |
| 81 | M&L for Circuit / Sub main wiring with Two runs of 4.0Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 4.0Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 25mm dia), concealed /surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit. |
| 82 | S&F IN REAPIR Rigid PVC conduit of 25mm dia, ISI marked, concealed type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories such as coupler, locknut, saddle pipe, hook etc., with and including cutting chases on wall / ceiling and making good surfaces, complete all as specified and as directed. |
| 83 | S&F IN REPAIR factory made epoxy powder coated distribution board double door TPN 4 ways (HTPN DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for MCCB / MCBs as outgoings, complete all as specified. |
| 84 | S&F IN REPAIR factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for MCCB / MCBs as outgoings, complete all as specified. |
| 85 | S&F IN REPAIR MCCB, 4pole, 125 Amps, 415Volts, thermal magnetic, Ics=100% Icu, 16kA current rating conforming to IEC-60947-II along with spreader incl Phase Barreir to be fixed in distribution board, complete all as specified. |
| 86 | S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed semi flush to the wall), SPN, 415 volt,12Way, double door, IP-42 protection with 200 Amp rated copper bus bar 230Volt, complete all as specified. |
| 87 | S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 415 volt,8Way, double door, IP-42 protection with 200 Amp rated copper bus bar 230Volt, complete all as specified. |
| 88 | S&F IN REPAIR RCBO DP 63Amp, 30mA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. |
| 89 | S&F IN REPAIR MCB SP 16 to 32Amp, 10kA, 230Volt, B curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. |
| 90 | S&F Exhaust fan, steel body, AC single phase, 230Volt, 300mm sweep, heavy duty with blades, frame, louvers, wiremesh with all accessories and necessary fixing details, including taking down existing u/s exhaust fan and depositing to AGE E/M Store yard, complete all as specified and as directed. |
| 91 | S&F BLDC Ceiling fan 1200mm sweep 3 blade energy saving with service valve 6.0 BEE 5 star rating, minimum 210 CFM air delivery with and including modular BLDC Fan regulator, 240Volt, 120 watt electronic step & socket type regulator, 2 Module, for ceiling fan of any sweep, complete all as specified. |
| 92 | S&F 20mm bore dia MS tube light grade ceiling fan down rod of required length, duly finished with powder coating of white colour, including making necessary holes, threadings etc., complete all as specified. |
| 93 | S&F FRLSH PVC insulated sheathed, multi standard, copper conductor cable of size 3.0 core x 1.5Sqmm, 1100 volts grade and multi stranded 1100 Volt grade confirming to IS 694: 1977, for electric connection, complete all as specified and as directed. |
| 94 | S&F IN REPAIR LED Professional Luminaries batten type fitting 1X20watt, 220Volt, >110 lum/W, PF>0.95, AC, indoor aluminium housing LED battens, integrated type batten with THD<10% with polycarbonate diffuser, with and including all accessories, pre-wired and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. |
| 95 | S&F IN REPAIR LED Professional Luminaries batten type fitting 1X10watt, 220Volt, >110 lum/W, PF>0.95, AC, indoor aluminium housing LED battens, integrated type batten with THD<10% with polycarbonate diffuser, with and including all accessories, pre-wired and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. |
| 96 | S&F IN REPAIR LED Professional luminaires 600mm x 600mm, 35/36 watt, 220Volt, >110 lum/W, PF>0.95, AC recessed type with high efficiency PMMA diffuser soft glare free light, complete with driver and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. |
| 97 | S&F IN REPAIR LED Building Security light fitting 35Watts, 230 volts, >110lum/W, with Suitable size GI bracket made out of 32mm GI light grade pipe fixed with clamps, nuts&bolts etc., with IP 65/66 protection with LED lamp, driver, bracket with impact, corrosion resistant and all accessories, complete all as specified and as directed. |
| 98 | S&F IN REPAIR GI pipe light grade pipe 50mm dia for cable protection, complete on pole/walls/in road etc for cable protection, complete all as specified. |
| 99 | M&L for IN REPAIR Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item. |
| 100 | S&F complete hanging assembly set of ceiling fan with rubber reel, MS clamps, nuts & bolts with lock hole & pin and down rod, complete all as directed by Engineer-in-Charge. |
| 101 | Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric FR power cable [heavy duty] of size 3.5core x 35.0Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., including taking down old u/s cable, complete all as specified. Note: Necessary excavation & earth work & cable protection pipe shall be measured and paid separately under respective items. |
| 102 | M&L for Double wall corrugated high density polymer (SDR 17) pipe of 63mm outer dia and 50mm inner dia, ISI marked, with and including necessary fittings like couplers, bends, end caps etc., laid in trenches /floors & fixed on wall/ pole with and including necessary fittings such as bends, sockets & other connected accessories, complete all as specified and as directed. |
| 103 | Earth work in excavation in trenches or drains (not exceeding 1.5m in width as well as 10Sqm on plan) not exceeding 1.50 m in depth, including dressing of sides and ramming of bottoms, lift upto 1.5m, as in all kind of soil, as in foundation, laying pipe lines / cables etc., complete all as directed by Engineer-in-Charge. |
| 104 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in any type soil, complete all as specified. [Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.] |
| 105 | Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified. |
| 106 | S&F GI pipe light grade pipe 40mm dia for cable protection, complete on pole/walls/in road etc for cable protection, complete all as specified. |
