Tender For Repair And Maintenance Of Mt Office Mt Jawan Barrack 02 Nos And Mt Light Vehicle Garage 02 Nos And Uro In Gandhinagar Campus Under Ftr Hq Bsf Gujarat Sh Providing Of Electrical Installations; 1 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.Group C 2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C 3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 5 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 6 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.2 x 6 sq. mm 7 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm 8 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch 9 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet 10 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch boxincluding connections but excluding modular plate as required. 11 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm) 12 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 13 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required 14 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required 15 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. 16 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door 17 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 12 way, Double door 18 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way (4 + 12), Double door 19 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 20 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral 21 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral 22 Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A C curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 23 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 24 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required 25 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required 26 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 25 sq. mm (22mm) 27 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 16 sq. mm (22mm) 28 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5x35 sqmm (32mm) 29 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm Dia 30 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 31 Supplying, Installation, testing and commissioning of 20W, 4 FEET LED LINEAR BATTEN TYPE LIGHT FIXTURE Wall/ ceiling batten luminaire having Length of LED Batten (Nominal) in mm: 1183(+/-5%) width of 23mm & height of 37mm. The housing shall made of Extruded Aluminium. The diffuser should be made of Polycarbonate. The luminaire shall have minimum system efficacy of 100lm/w & shall deliver minimum system lumens of 2000lm. The LED used shall be with Lifetime: up to 30,000 h, CCT:6500K and CRI ≥80. The luminaire should be BIS registered electronic driver with PF≥0.90, THD≤10%, Minimum Internal Surge Protection 2KV, operating Voltage Range of 150V - 270 V, 50Hz Beam angle 150 °. Theluminaire shall be IP-20 rated, light pre-wired, compact LED fitting of all types, complete with all accessories etc, direct on Wall/ ceiling of all sizes and shapes containing upto two LED lamps per fitting, complete with all accessories including connections etc. as required. Make - Phillps/GE/ Surya/Havells/ GM/Crompton/ Polycab/ C&S/ Wipro/Orient etc. 32 Supplying and installation, Testing, Commissioning of 12W LED square type surface mounted down light fixture, The housing shall made of ABS plastic with PC diffuser in opal finish. The luminaire shall have minimum system efficacy of 70lm/w & shall deliver minimum system lumens of 840lm. The LED used shall be with life of 50000hrs, CCT: 6500K and CRI ≥70. The luminaire shall use BIS registered electronic driver with PF ≥0.80, THD≤10%, Minimum Internal Surge Protection 2KV, operating Voltage Range of 150V - 270 V, 50Hz. The luminaire shall be IP-65 rateddirect onceiling of all sizes and shapes containing upto two LED lamps per fitting, complete with all accessories including connections etc. as required. Make - Phillps/GE/ Surya/Havells/ GM/Crompton/ Polycab/ C&S/ Wipro/Orient etc. 33 Supplying and installation, Testing, Commissioning of 10W LED LINEAR BULKHEAD TYPE LIGHT FIXTURE Wall mounted bukhead light fixture made of pressure die-cast aluminium housing for better thermal efficiency with high efficiency long life LED module, Electronic ballast with THD< 20% & PF>0.95, The luminaire shall have minimum system efficacy of 100lm/w, The LED used shall be with life of 50000hrs@L70, CCT: upto 4000K and CRI ≥80. The luminaire should be BIS registered electronic driver with PF ≥0.90, THD≤10%, IP66 rating, connector for power cable connection, Suitable for wall or ceiling through mounting hole, the light fixture to be supplied with all necessary accessories, directly on wall of all sizes and shapes containing upto two LED lamps per fitting, complete with all accessories including connections etc. as required. Make - Phillps/GE/ Surya/Havells/ GM/Crompton/ Polycab/ C&S/ Wipro/Orient etc. 34 Providing and fixing of 100 watt LED flood light made of PDC aluminium housing, toughened glass, lens, with IP 67 Protection directly on wall of all sizes and shapes containing upto two LED lamps per fitting System Lumen efficacy of LED >140 lm/W and viewing angle of 120° to ensure better uniformity, Total harmonic distortion (THD) ≤10%, Power Factor >0.95, Color rendering index (CRI) ≥70, Colour Temp. (CCT) 5700 K, suitable for 230 V, 50 Hz,1-¢ AC supply, luminaire Light output shall not be less than 90 percent of the rated Luminous Flux -11500 lm, Features- Delivers excellent illumination, Long life & photobiologically safe LEDs, No harmful UV & IR radiations, Environment friendly as it does not contain Mercury, Instant light with low running temperatures, Operating temperature: -10° C to +45° C, Operating voltage range: 140 V -270 V, Average life L70B50: 50000 hours, BIS registered Electronic driver- independent Potted IP67 electronic LED driver with APFC, lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10 kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1., Optics- High efficiency polycarbonate UV stablized cover (For detailed photometric data, please refer LM79 report & IES file), Housing & Finish- Epoxy powder coated die-cast aluminium housing (ADC12) in grey finish with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. M16 gland is used for cable entry and provision for loopin-loopout, pole mounting on bracket etc, as required Make - Phillps/GE/ Surya/Havells/ GM/Crompton/ Polycab/ C&S/ Wipro/Orient etc. 35 Providing and fixing of 25/30 watt LED Post top lantern is a weather proof die-cast aluminium spigot for mounting LED driver and spun aluminium canopy which is painted white inside. Epoxy powder-coated matte black finish after phosphochromate treatment directly on wall of all sizes and shapes containing upto two LED lamps per fitting System Efficacy not less than 120 lm/W, Total harmonic distortion (THD) ≤10%, Power Factor >0.95, Color rendering index (CRI) ≥70, Colour Temp. (CCT) Cool white(6500K) suitable for 230 V, 50 Hz,1-¢ AC supply, luminaire Light output shall not be less than 90 percent of the rated Luminous Flux -2500 lm, Features- Delivers excellent illumination, Long life & photobiologically safe LEDs, No harmful UV & IR radiations, Environment friendly as it does not contain Mercury, Instant light with low running temperatures, Operating voltage range: 120V-280V, Operating temperature: –20° to 55°C, Average life L70B50: 50000 hours, Over Voltage protection, Surge Voltage protection upto 4 kV & other safety test as per IS 15885 Part-2/ Sec 13, Optics- High efficiency polycarbonate UV stablized cover (For detailed photometric data, please refer LM79 report & IES file), IP66 protection and impact resistance of IK07, post top Mounting system: Suitable for 40 to 60mm O.D. mounting pipes, Recommended mounting height with suitable inground reinforcement is 6-9 m, As per IS 16107 Part 2/sec1 and 16103 Part 2, cl no. 7, and clause 8.1 respectively etc, as required Make - Phillps/GE/ Surya/Havells/ GM/Crompton/ Polycab/ C&S/ Wipro/Orient etc. 36 Providing and fixing of 30 watt LED flood light made of PDC aluminium housing, toughened glass, lens, with IP 66 Protection directly on wall of all sizes and shapes containing upto two LED lamps per fitting System Efficacy not less than 100 lm/W, Total harmonic distortion (THD) ≤10%, Power Factor >0.95, Color rendering index (CRI) ≥70, Colour Temp. (CCT) 5700 K, suitable for 230 V, 50 Hz,1-¢ AC supply, luminaire Light output shall not be less than 90 percent of the rated luminaire efficacy As per the IS 16107 part 2- sec1 clause no. 8.3, Operating voltage range: 140 V - 270 V, Operating temperature: -10 °C to + 50 °C, Average life: 50000 hours @ L70, BIS registered Electronic driver- Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Open & Short circuit protection, reverse polarity protection, surge protection of 5KV internal and 10KV SPD & other safety test as per IS 15885 Part-2/ Sec 13, Optics- High efficiency polycarbonate UV stablized cover (For detailed photometric data, please refer LM79 report & IES file) with IP66 protection and impact resistance of IK05, As per IS 16107 Part 2/sec1 and 16103 Part 2, cl no. 7, and clause 8.1 respectively etc, as required Make - Phillps/GE/ Surya/Havells/ GM/Crompton/ Polycab/ C&S/ Wipro/Orient etc. 37 Supplying, Installation of 230 mm sweep Exhaust fan, Ventilation DB Four blades, Watt: 45, RPM: 1400, Air Delivery: 860CMPH Rated frequency : 50 Hz, Noise level: 45dB, Double ball bearing for long life Aerodynamically balanced blades for smooth operations, Powerful 100 percent copper motor for high air suction, Boasting a premium metallic finish, performance Warranty: 2 years in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Make- Standard/ Crompton/ Havells/ Bajaj/ Polar/ Orient/ Usha etc 38 Supplying and Laying of one following size PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988 with upto Date Amendments ofAluminum armoured cable direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Make- Havells/ Polycab/ RR Kabel/ Finolex. 2 x 16 Sq mm power cablealuminium conductor armoured cable 39 Supplying and Laying of one following size PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988 with upto Date Amendments ofAluminum armoured cable direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Make- Havells/ Polycab/ RR Kabel/ Finolex. 2 x 25 Sq mm power cablealuminium conductor armoured cable 40 Supplying and Laying of one following size PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988 with upto Date Amendments ofAluminum armoured cable direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Make- Havells/ Polycab/ RR Kabel/ Finolex. 3.5x 35 Sq mm power cablealuminium conductor armoured cable 41 Providing and installation of main feeder pillar (500mm X 400mm X 400mm) out door double door type weather proof feeder pillar manufactured from CPRI & IEC 61439 approved fabricator of suitale size to accommondate following mounting stand with 50mm X 50mm X 6mm thick angle iron, legs 80 Cms long and 1.6mm thick MS sheet, 63A TP&N aluminium busbar/ Copper connction wire with heat shrinkable coloured sleeves and including DMC / S6C bus bar supports at required intervals for complete cross section, complete with detachable cable gland plates made of 2 mm thick CRCA sheet, earthing studs, separators, supports and insulators. The feeder pillar should be provided with suitable size terminal blocks for incoming & outgoing cables. From MCCB to terminal blocks connection will be done with solid aluminium bus bar / conductor. Incoming / outgoing cables will be terminated in terminal blocks. Including pre paint treatment, phosphating and powder coating by approved Siemens grey paint, suitable for operation on 415 volt, 50 Hz, 3 phase, 4 wire A. C. supply system complete excluding providing and fixing the following mountings, switchgears and accessories. 42 Supplying and fixing of 250x220x105 mm inbulit SPMCB and connector junction box for pole connection.
