Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Manufacturing Unit; As Per Bid Document; Buyer, Haridwar-Uttarakhand

Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Manufacturing Unit; As Per Bid Document; Buyer; LAYING OF 1.1 KV GRADE, PVC INSULATED, 240 SQMM AS DOWNTAKE FROM OVERHEAD ALUMINIUM BUSBARS UPTO SWITCH FUSE UNIT(SFU). THE CABLE SHALL BE SUPPORTED AT EVERY 1 METER DISTANCE ON PROPER ANGLE AND FIXED WITH MS CLAMPS FIRMLY ALL WELDED PARTS CLAMPS, ANGLES SHALL HE PAINTED WITH GREY ENAMEL PAINT BEFORE FIXING OF CABLEBOTH ENDS OF CABLE SHALL BE TERMINATED ON PREFIXED BUSHAR TAPOFF CLAMPS AT ONE END AND ON SFU AT OTHER END THROUGH LUGSE CRIMPING TYPE) ONLY AL CABLE AND SFU SHALL BE SUPPLIED BY BHEL FREE OF COST. ALL WORK, CABLE ROUTE ETC SHALL BE DONE AS PER INSTUCTIONS OF ENGINEER INCHARGE AT SITE. LAYING, CONNECTING, TESTING AND COMMISSIONING OF 3.5 CORE 120 SQMM ALUMINIUM/COPPER CONDUCTOR 1.1 KV GRADE PVC INSULATED, PVC SHEATHED ARMOURED/UNARMOURED CABLE CONFORMING TO IS 1554(PART 1) IN EXISTING CABLETRENCH/CABLE DUCT/PIPES/ALONG THE WALL INCLUDING ALL OTHER ASSOCIATEDWORKS SUCH AS CLAMPS, BOLTS, NUTS, PAINTING ETC. AND PROVIDING CABLEIDENTIFICATION MARKERS AND CABLE NUMBER FERRULES/MARKERS OF APPROVED DESIGN, MADE OF GI AFTER EVERY 20 METERS COMPLETE AS REQUIRED. SUPPLY AND INSTALLATION OF MS CABLE END BOXES OF STANDARD DESIGN, PRE FABRICATED TO SUIT 400/250/125 AMP,3 PHASE,4 WIRE SFUS DEPENDING UPON SITE REQUIREMENT ITSHOULD BE COMPLETE WITH SCREW COVER, MOUNTING HOLES, CABLE CUTOUTS ETC. THE BOXIS TO BE FABRICATED WITH MIN 2MM MS SHEET THE CABLE END BOXES ARE TO BE FIXED ONSWITCH PUSE UNIT AS PER INSTRUCTIONS OF ENGINEER INCHARGE. THE WORK ALSOINCLUDES INSTALLATION OF SPU ON COLUMN BY MOUNTING FRAME MADE UP OF MSANGLE OF APPROPRIATE SIZE INCLUDING THE SUPPLY OF ANGLE IRON FRAME WITHREQUIRED HARDWARE, MAKING CONNECTION, EARTHING AND PAINTING OF FRAMECOMPLETE AS REQUIRED SFU SHALL BE INSTALLED ON A SAFE WORKING HEIGHT OF 1.5 MFROM ZERO LEVEL MOUNTING FRAME SHALL BE EARTHED FROM MAIN EARTH LINE ALL STEELPARTS SHALL BE PAINTED WITH ONE COAT OF RED OXIDE PRIMER AND THERE AFTER ONECOAT OF SMOKE GRAY ENAMEL PAINT. (ONLY SFU SHALL BE SUPPLIED BY BHEL FREE OF COST ALL OTHER MATERIALS, CONSUMABLES, HARDWARE ETC SHALL BE UNDER CONTRACTORSSCOPE OF WORK) MOUNTING AND CONNECTION OF BUS BAR SECTION/CABLE JUMPERS/BUS-BAR JOINTS ETC AT THE OVERHEAD BUS-BAR GRID TO ENERGIZE THE BUS-BAR FROM SUPPLY. ANY FASTENERS, LUGS, JOINTS, CABLES ETC IF REQUIRED WILL BE PROVIDED BY BHEL FREE OF COST. WORK SHOULD BE COMPLETE IN ALL RESPECT AS PER INSTRUCTION OF ENGINEER IN CHARGE MOUNTING AND CONNECTION OF BUS BAR SECTION/CABLE JUMPERS/BUS-BAR JOINTS ETC AT THE OVERHEAD HUS BAR GRID TO ENERGIZE THE BUS-BAR FROM SUPPLY ANY FASTENERS, LUGS, JOINTS, CABLES ETC IF REQUIRED WILL HE PROVIDED BY BHEL FREE OF COST WORK SHOULD BE COMPLETE IN ALL RESPECT AS PER INSTRUCTION OF ENGINEER IN CHARGE

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB