Tender For Special Repair To Building No P-301 I And Ii Cook House Hall Of 253 Med Regt, Garhi Cantt Under Ge Dehradun.; 1 Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. 2 Material and Labour for brick work with subclass B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 ,complete all as specified and directed. 3 Material and Labour for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar1:4, complete all as specified and directed. 4 Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc., complete all as specified and as directed. 5 Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth ,complete all as specified and as directed by Engr-in-Charge. 6 Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth, complete all as specified and as directed . 7 Material and Labour rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work even and smooth as in ceiling, complete all as specified and ditected. 8 Material and Labour forpreparingnew plastered surface on walls with two coat of distmper oil emulsion white or tined over a coat of1- 1.50 mm thick wall care putty on walls, completeall as specified and directed. 9 Material and Labour for preparation of newly plastered surface of ceiling and applying three coat of white wash, complete all as specified and ditected. 10 Material and labour for preparation of new plastered surface of walls including corners to receive the coats as per manufacturer directions over a coat of1- 1.50 mm thick wall care putty on walls and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing including preparation of surfaces complete all as specified and directed by Engr-in-Charge. Make:- Asian Paints Product Cose 5457 or Berger Home Shield Dampstop Elasto or Nerolac Perma No Damp + or equivalent. 11 Material and Labour for complete removal of existing treatment on ceiling and applying three coats of white wash on ceiling, off sets, pillar etc complete all as directed and specified. 12 Material and labour for preparation of old plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing including preparation of surfaces complete all as specified and directed by Engr-in-Charge. Make:- Asian Paints Product Cose 5457 or Berger Home Shield Dampstop Elasto or Nerolac Perma No Damp + or equivalent. 13 Material and Labour for complete removal of existing treatment of walls including corners and applying two coats ofdistemper oil emulsion over applying of 1-1.5 mm thick wall care putty finish wall surface even & smoothall as specified and directed. 14 Preparation of old Steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint ,complete all as specified and directed 15 Material and Labour preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed. 16 Material and Labour non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 7-8 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existingtiling including cement mortar bedding (but not backing) andrubbish off the premises, complete all as specified and ditected. 17 All as per item No 11 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4,complete all as specified and directed. 18 Material and Labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existingwall tiling including cement mortar bedding (but not backing) andrubbish off the premises, complete all as specified and directed. 19 Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc. 20 Supply & fixgranite stone 10-15mm thick of any type (table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like in 15mm thick cement mortar 1:4 incl pointing in white cement complete all as specified and ditected. 21 Material and Labour 18-20mm thick for Machine cutkota stone slab flooring in one colour over 20 mm thick over CM 1:4 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as spd and directed 22 Material and Labour for vitrified ceramic coloured tiles 8-9 mm thick light shade (square/rectangular) polished area of each tiles not exceeding 0.72 sqm, in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) andrubbish off the premisescomplete all as specified and directed. 23 All as per item No 18 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4,complete all as specified and directed. 24 Taking down chowkat with shutter n. exc 1.5 Sqm each complete all as specified and as directed. 25 Supply and fixing factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. 26 Supply and fixing 30 mm thick WPC factory made 100% solid designer flush door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified and directed. 27 Supply and fixing for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet/SS wire guage complete with rubber packing/aluminum beading etc, complete all as specified and directed. 28 Supply & fixin repairs Stainless steel 304 grade wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle, complete all as specified and ditected. 29 Supply & fixmild steel Framed work such as grills, gratings , Iron Chowkhats etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work mild steel conforming toFe 290. Gde-E-165 ,complete all as specified anddirected. 30 Material and Labour for two coat of synthetic enamel paint over a coat of primer including preparation onnew steel surfaces ofany description over 10 cm width or girth 31 Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed, complete all as specified and directed. 32 Supply & fix3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed ,complete all as specified and directed. 33 Dismantling block board/ boarding of any description and in any position complete including iron mongries ,complete all as specified.. 34 Supply & fix 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet frontshutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive ,complete all as specified and directed. 35 Supply & fix 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications & directed . 36 Supply & fixfor magnetic catcher and striking plate including letting in and fixed complete all as specified and directed. 37 Supply & fixfor Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) ,complete all as specified as directed. 38 Supply & fix Stainless steel barrel tower bolts 150 mm long one piece and fixed, complete all as specified 39 Supply & fix stainless steel barrel tower bolts 200 mm long one piece and fixed ,complete all as specified 40 Supply & fixstainless steel handles 150 mm long one piece and fixed with screws/welded to frame ,complete all as specified 41 Supply & fixstainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete all as specified 42 Supply & fix300 mm longstainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing boltsand fixed complete. 43 Supply & fixin repair peg set of five pegs stainless steel fixed on CP steel plate 304 grade including fixing screw as per approved sample. 44 Supply & fixin repairs glass corner shelf suitable size made of 5mm thick toughned glass all as specified. 45 Supply & fix in repair glass shelf assembly consisting of 5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm, complete all as specified and directed. 46 Supply & fixin repair 25 mm dia stainless steel polished304 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends, completeall as speccified and directed as per approved sample. 47 Supply & fixin repairs CP brass Soap dish 6 inches, complete all as specified and directed. 48 Supply & fixmedium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing including taking down of old pipes complete all as specified and directed. 49 Supply & fixmedium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing including taking down of old pipes complete all as specified and directed. 50 Supply & fixmedium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 25 mm bore GI tubing including taking down of old pipes complete all as specified and directed. 51 Supply & fixin repairs PVC low level flushing cistern 10 ltr capacity including flush pipe all as specified. 52 Supply & fixPVC connection 15mm size with PTMT nuts, of 450 mm length. 53 Supply & fixCP bib tap fancy type cast copper alloy 15 mm bore screwed down screwedfor iron pipe or for brass ferrule. 54 Supply & fixfancy type concealed stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 20mm dia iron pipe all as directed. 55 Supply & fixin repairs CP brass fancy type Angle cock 15mm dia ISI mark completed all as specified and directed . 56 Supply & fixin repair CP brass shower rose 15mm dia,100mm dia complete all as specified and directed. 57 Supply & fixin repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white withfront or back inlet with integral foot rests including 100mm CI P trap including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed. 58 Supply & fixin repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall / laid in trenches or in floors complete all as specified and directed. 59 Supply & fixin repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall / laid in trenches complete all as specified and directed. 60 Supply & fixPVC (SWR) bend 110 mm dia, any radius with oval access door complete all as required and as directed. 61 Supply & fixPVC (SWR) bend 75 mm dia, any radius with oval access door complete all as required and as directed. 62 Supply & fixPVC (SWR) branch pieces 75 mm bore single (equal or unequal) with oval access door complete all as specified and directed. 63 Supply & fixPVC(SWR) branch pieces 110 mm bore single (equal or unequal) with oval access door complete all as specified and directed. 64 Supply & fix600mm x 450mm bevelled edge looking mirror of selected quality glass,mounted on 6mm thick AC building board or commercialplywood including aluminium framing and fixed to wooden plugs withchromium plated brass screws and cup washers. 65 Supply & fixPVC nahani trap of 75mm bore, with grating including jointing towaste pipe with solvent fixed in cement concrete type B1 (1:2:4) complete. 66 Supply & fixwaste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including 32mm PVC waste pipe for WHB,complete all as specified. 67 Supply & fixin repair CP steel Grating round with steel frame with hinge 100mm dia all as sample approved by Engr-in-charge. 68 Supply & fixin repairs Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets complete. 69 Supply and fixedpillar taps, 15mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe & fixed. 70 Supply and fix rotational moulded polyethylene water storage tanks white colour of capacity 500 litres tripple layer, not less than 18 Killogram (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. 71 Supply and fix for rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks white colour of weight not less than 33 Killogram (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia including dismantling of old tank complete all as specified and directed. 72 Supply & fixin repairsGun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore , complete all as specified and directed. 73 Supply and fixing in repair double bowl kitchen sink ISI marked made of stainless steel 1 mm thick with coupling plug, washers including bedding in cement mortar on to draft wall or including fixing cantilever brackets and connecting union to pipe overall size 1000mm x 545mm x 230mm , bowl size 460mm x 460mm x 230mm complete all as specified and directed. 74 Material and Labour for taking down existing roof treatment of felt etc any thickness or description including cleaning all upto roof slab incluing removing spoil form site and Material and Labour for providing roof treatment as per the following steps :-i) Filling cracks of roof slab with approved chemical sealing compound and applying 15mm thick renedering in CM 1:4 over neat cement slurry @ 3.00 Kg/Sqm over cleaned roof surface with use of approved water proofing compoung. ii) Applying a coat of cold applied bituminous primer @ 0.30 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minium weight 3.60 Kg/Sqm reinforced with plyester non-woven fabric (weight not less than 150 gms/Sqm) manufactured by M/s STP Ltd or M/s Texsa India Ltd, laid as per the manufacturers instruction with side over lap of 75mm and end over lap of 100mm and finally finished with super silver sheild @ 0.10 Ltr/Sqm. Note : The work of water proofing treatment shall be got executed thorugh manufacturer or their authorised applicator only. 75 Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) 76 Material and Labour 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection inground floor and paving below or above ground level, complete all as specified and as directed. 77 Material and Labour 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in flooring, finished even and smooth without using extra cement. 78 Material and Labour factory made prepolished rubber moulded vibromatic Chequred cement concrete tiles 30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and colour pigment to matc over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified. 79 Material and Labour for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate), 75 mm thick as in sub base complete all as specified and as directed. 80 Dismantling of wrought iron or mild steel work of any descrption not otherwise provideed for complete all as specified and directed 81 Supply & fixfor Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410-W(Gde E-250) quality-A complete all as specified and directed. 82 Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc, complete all as specified 83 Supply & fixPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,complete all as specified and as directed. 84 Point wiring with PVC insulated and unsheathedelectric wire 1100 volts grade single core FRLS having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional areadrawn in and including concealed non metallic rigid PVC conduit not less than 25 mm diawith all fitting and fixing accessories and1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6mm thick, 60mm deep including 3mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers for mounting switches, sockets including taking down point wiringetc complete for the following type :- Note:- (i) The quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. 85 One light point controlled by one, one way 6 Amp switchs 86 One fan/exhaust fan point controlled by one, one way 6 Amp switchs 87 One 5 pin 5/6 Amps socket outlet point on theindependentboard with other switchs. 88 One 5 pin 5/6 Amps socket outlet point onsame board controlledby one, one way switchs. 89 Description all as per item No 84 here in before but point wiring with 4 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4sqmm PVC insulated multi strand copper conductor cable as continous earth wire. 90 S & Finreplacementswitch piano, flush type, single pole one way 6 Amp . 91 S & F inreplacement switch piano, flush type, single pole one way 16Amp . 92 S & F inreplacement socket outlet, multipurpose, 2 in 1 5 pin, 6 Amp. 93 S&F inreplacement socket outlet, multipurpose, 2 in 1 5 pin, 16 Amp with fuse and neon indicator . 94 S & Finreplacement Electronic steppped type fan regulator 100 watt230 volts AC 50 Hz.. 95 S & Finreplacement ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body. 96 S & F sub main wiringwithPVC insulated unsheathed FRLSH cable 1100 Volt grade,with multi stranded copper conductor drawing in and including rigid PVC conduit in concealed / surface as required at site including one runPVC insulated unsheathedcable with multi stranded copper conductor colour code as a earth continuity and connected upto DBincluding taking down old unsv submain wiring of following sizes .Note:(i)Tworun of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface withusing PVC rawl plugs etc.(iii) Phasecolour code must be follow i.ePhase( Red) and Neutral ( Black) In colour and for three Phase RYB For phase and black for neutral. 97 2 x 6 Sqmm+ 1 x 6 sqmm 98 S & F inreplacementMCB SP 240 volts B Curve 10 KA . including connection with suitable size copper lugs of following capacity 99 MCB SP 6 to32 Amp.240 volts 100 MCB SPN 40to 63 Amps 240 volts 101 S & F in replacementDistribution box MCB Protected socket with Plastic enclosure (Surface mounitng ) 20 AMP MCB Combo box DP including plug top complete all as specified and directed 102 S & F in replacementMCB DB, sheet metal enclosures double door.The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection of following size:- 103 8 way SPNDB. 104 S & Fin replacementBatten holder, PVC/polycarbonate type with back plate suitable for batten fittings . 105 Supply and fixing LED building securitylight fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. 106 Supply and Fixingin replacementhigh prssure die cast alluminium LED Batten light fitting 20W ,125 lumens /watt,IP-20,colour temp not less than 6500,inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV 107 Material and labour for Earthing complete with galvanized ironearth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board andtesting on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc.GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed.Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtrfrom the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.
