Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-12-2025 |
| 2 | 04-12-2025 | BOQ Corrigendum | BOQ | 16-12-2025 |
| 3 | 02-12-2025 | Date corrigendum | Date | 16-12-2025 |
| Sl. No. | Item Description |
| 1 | SCHEDULE \"A\" PART-I [B/R Works]:M & L for 20mm outer dia, 3-layer PP-R Polypropylene random copolymer) concealed pipesSDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors including taking up or down old GI tubing 15mm bore complete all as specified and as directed. |
| 2 | M & L for 25mm outer dia, 3-layer PP-R Polypropylene random copolymer) concealed pipesSDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors including taking up or down old GI tubing 20mm bore complete all as specified and as directed. |
| 3 | M & L for 50mm outer dia, 3-layer PP-R Polypropylene random copolymer) concealed pipesSDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors including taking up or down old GI tubing 25 to 50mm bore complete all as specified and as directed.[Note for item Nos. 1 to 3 above: Quoted rate is deemed to be inclusive for cutting holes into or through masonry walls/concrete structures and making good disturbed surfaces complete whereever required] |
| 4 | S & F in repairs gun metal, globe or gate valves, 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed suitable for PPR pipes complete all as specified and as directed. |
| 5 | S & F in repairs gun metal, globe or gate valves, 40mm bore with iron wheel head, screwed both ends for iron pipe and fixed suitable for PPR pipes complete all as specified and as directed. |
| 6 | S & F in repairs gun metal, globe or gate valves, 50mm bore with iron wheel head, screwed both ends for iron pipe and fixed suitable for PPR pipes complete all as specified and as directed. |
| 7 | S & F 150mm bore PVC (SWR) soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls or laid in sunken floors including dismantling of old CI pipes 150mm dia complete all as specified and directed. |
| 8 | S & F 110mm bore PVC (SWR) soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls or laid in sunken floors including dismantling of old CI pipes 100mm dia complete all as specified and directed.[Note for item Nos. 7 & 8 above: Quoted rate is deemed to be inclusive for cutting holes into or through masonry walls/concrete structures and making good disturbed surfaces complete whereever required] |
| 9 | S & F 110mm PVC (SWR) WC connector with lip ring |
| 10 | S & F 110 mm bore PVC [SWR] Junction Single [Single \"T\"] equal or unequal with access door complete all as specified and as directed. |
| 11 | S & F 150 mm bore PVC [SWR] Junction Single [Single \"T\"] equal or unequal with access door complete all as specified and as directed. |
| 12 | M & L for 150mm bore PVC (SWR) bends any radius with access door complete all as specified. |
| 13 | M & L for 110mm bore PVC (SWR) bends any radius with access door complete all as specified. |
| 14 | M & L for PVC (SWR) bends any radius with access door with duck\"s foot or heel rest upto work for 150mm dia pipe complete all as specified. |
| 15 | S & F PVC [SWR] vent cowl for 150mm dia |
| 16 | Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc including removing debris upto a distance of 15 Km complete all as directed. |
| 17 | M & L for rendering in two layers comprises of 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished with 5mm thick in CM 1:4 duly mixed with and including cement water proofing compound as per manufacturers instructions, finished even and smooth with out using extra cement complete all as specified and directed. |
| 18 | M & L for preparation of newly plastered surfaces of walls/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as directed |
| 19 | M & L for complete removal of existing treatment, preparation of surfaces of walls/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as directed |
| 20 | M & L for providing and injecting chemical emulsion for post construction anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at 2.25 litres per linear running metre including drilling and plugging holes with cement mortar (1:2) to match with the existing surface complete all as specified and directed by Engineer-in-Charge. |
| 21 | M & L for providing and injecting emulsion for post construction anti-termite treatment under existing floors using emulsion CHLOROPHYRIFOS 20 EC at 1% concentration at the rate of one litre per each hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match the existing floor complete all as specified and directed by Engineer-in-Charge. |
| 22 | M & L for providing and injecting chemical emulsion for post construction anti-termite treatment at points of contact of wood work by chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at the rate of 0.5 litre per each hole by drilling 6mm dia holes at a downward angle of 45 Degree at 150mm centre to centre complete all as specified and directed by Engineer-in-Charge. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 24 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed. |
| 25 | S & F factory made UPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + 0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories to be provided with proper operative and locking hardware mechanism, frame to be fixed to wall with high quality fasteners and silicon glue is to be applied to fill up the gap between frame and wall to make leak proof fcomplete all as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 26 | Cutting openings through walls built in cement mortar for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing debris upto a distance of 15Km complete all as specified and directed |
| 27 | M & L for Forming jambs, etc., to openings for new work built in in Cement mortar 1:4 including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete all as directed |
| 28 | M & L for Making good under cills (or over arches, lintels and bressummers) including allpinning as necessary new work built in CM 1:4 complete all as directed |
| 29 | M & L for RCC 1:2:4, type B-1, using 20mm graded stone aggregate as in cast in lintels upto 1.5m span, copings, bed blocks for hold fasts, bed plates, roof kerbs and similar work including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed. |
| 30 | M & L for High Strength Corrosion Resistant Deformed TMT Bars of 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 31 | M & L for High Strength Corrosion Resistant Deformed TMT Bars of 8mm dia and over, as in stirrups, spacers, binders including hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 32 | S & F mild steel framed work such as grills, grating, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conformingto FE-410-0 of FE-310-0 including dismantling old wrought iron or mild steel work of any description complete all as specified and as directed |
| 33 | M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 34 | S & F anodised aluminium grill (anodised transperant or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern with approved standard section and fixed to the existing window frame with CP brass / stainless ateel screws @ 200mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as directed by the Engineer-in-Charge. |
| 35 | S & F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty fixed to aluminium / UPVC windows in squares not exceeding 0.5 Sqm in each pane for fixing in UPVC windows complete all as specified and directed. |
| 36 | S & F 19mm thick Plywood, grade BWR, type BB, fixed with fevicol and nails fixed to timber frame work complete all as specified |
| 37 | S & F in repairs 12mm thick Plywood, grade BWR, type BB, fixed with fevicol and nails fixed to timber frame work complete all as specified |
| 38 | S & F 0.9mm thick decorative laminate type-1 of surface finish, colour and pattern as approved fixed with approved adhesive complete all as directed |
| 39 | M & L for Providing light weight AAC block bats concrete 1:3:6 mix [1 part of cement : 3 parts of coarse sand : 6 parts of AAC block bats of size 40-60mm] mixed with and including approved water proofing compound as per manufacturers instructions as in filling in sunken floors, well rammed and compacted as required including demolition of existing concrete and removal of debris out side MD land upto a distance of 15 Km complete all as specified and directed by the Engineer-in-Charge:-Notes: [a] The AAC Block bats shall confirm to relevant IS and all necessary tests shall be caried out before incorporating the same in the work.[b] Care shall be taken prior to filling, that all pipes passing through sunken portion are pressure tested by maintaining pressure for 24 hours and junctions of pipes passing through walls, slabs are well grouted and sealed. Necessary testing shall be carried out by ponding water for required depth and maintaining continusously for 72 hours and any leakage found shall be immediately rectified without any extra cost.[c] Rate quoted by the contractor shall be deemed to include for the cost of working at all levels, leads and heights. |
| 40 | M & L for filling Polymer modified non shrinking slurry with CEBEX 100 of Fosroc or equivalent chemical for sunken floors for toilets by drilling holes to a depth of 60mm and 20mm dia at 1m interval and applying 2mm thick brush bond over the concrete surfaces by mixing acrylic emulsion NITO BOND of Fosroc or equivalent with brush bond powder and water and testing the same for 48 hours with complete filling within the sunken floor as per manufacturers technical specifications complete all as directed. |
| 41 | M & L for 40mm thick, PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in flooring, finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | M & L for Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced orotherwise not exc 100 Sqcm superficial are of work complete all as specified and directed |
| 43 | S & F Unplasticized PVC pipes 50mm bore of pressure rating 10 kgf/Sqcm complete all as directed |
| 44 | M & L for rendering 15mm thick in CM 1:3 on fair faces of brick work or concrete surfaces duly mixed with and including water proofing compound as per manufacturers instructions, finished even and smooth with out using extra cement complete all as specified and directed. |
| 45 | S & F factory made single rebated Wood Polymer Composite [WPC] solid door/ window / ceosetory windows & other Frames/ Chowkhats of size 65mm x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as specied and as directed. |
| 46 | S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class \"A\" category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge. |
| 47 | M & L for Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required [Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall complete all as directed. |
| 48 | S & F Stainless steel Butt hinges, 100mm size medium weight complete all as specified and directed. |
| 49 | S & F extruded aluminium alloy handles fabricated type anodised of size 150mm complete all as directed. |
| 50 | S & F Aluminium anodised barrel Tower Bolt of size 200 mm size of extruded section complete all as specified and as directed. |
| 51 | M&L for PVC (SWR) Multi floor trap of 75mm of 75 mm dia outlet with 304 grade stainless steel square flat cut floor grating 125mm x 125mm with cockroach trapwith or withouthole as per requirement of site and as directed by Engineer-in- charge including jointing with solvent cement complete all as specified and as directed. |
| 52 | S & F in repairs 15mm bore bib tap fancy type Chromium plated capstan head, screwed down, screwed for 15mm dia bore iron pipe complete all as specified and directed. [Make shall be Jaquar of Cat Part No. ACN-CHR-5041N or its equivalent] |
| 53 | S & F fancy type Chromium plated two way bib taps, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule with flanges complete all as specified and directed. [Make shall be Jaquar of Cat Part No. KUP-35041PM or its equivalent] |
| 54 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed. |
| 55 | S & F in repairs Brass Chromium plated shower rose 125mm with or without swivel joints, including fixing to steel pipe or union complete all as directed |
| 56 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia, \"D\" type, 60cm long between flanges complete all as directed |
| 57 | S & F in repairs PVC body cabinet box mirror of size 350x450x100mm in PTMT alloy of approved pattern and design complete all as directed. [Make shall be PYAYAG of Cat Part No. 551 or its equivalent] |
| 58 | M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces, finished even and smooth with out using extra cement complete all as directed. |
| 59 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick light shade (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 including dismantling existing tiling including cement mortar bedding (but not backing) and removing debris upto a distance of 15Km complete all as specified and directed.Notes: [a] The colour/ shade/ design of tiles shall be as approved by GE.[b] The tile joint shall be kept as 3mm using tile spacers and masking tape shall be provided before applying of the epoxy grout and the surplus grout materials shall be thoroughly cleaned immediately. |
| 60 | M & L for coloured Glazed ceramic tiles of size 450x350x7-8mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:4 including dismantling existing tiling including cement mortar bedding (but not backing) and removing debris upto a distance of 15Km complete all as specified and directed. |
| 61 | S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern] of size 560x440x395mm or nearest size, White, including flush pipe of polyethylene of low or high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMTcheck nut and union etc. including brackets and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and \"P\" or \"S\" trap complete all as specified and as directed. |
| 62 | S & F in repairs 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 63 | S & F in repairs soap dish holder fixed to plugs with chromium plated brass screws complete all as directed. [Make shall be Jaquar of Cat No. ACN-1131N or its equivalent] |
| 64 | S & F in repairs toilet Paper holder with flap Recessed Type (Stainless steel) fixed to wall with chromium plated brass screws complete all as specified and directed. [Make shall be Jaquar of Cat Part No. ACN-1153S or its equivalent] |
| 65 | S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550mm X 400mm, 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified and as directed. |
| 66 | S & F in repairs 15mm dia fancy type, CP Stop valve, screwed down, high pressure, with crutch or butterfly handle, concealed type with long shank and cup screwed both ends for iron pipe or for unions and fixed complete all as directed. |
| 67 | S & F in repairs 15 mm bore fancy type Chromium plated stop valves, cast copper alloy, with crutch or butterfly handle, screwed down high pressure for iron pipe complete all as specified and directed. |
| 68 | S & F in repairs vitreous china squatting pan of orissa pattern of size 580x440mm colour to match the existing surface with P or S trap front or back with integral foot rest including connection to trap and to flushing pipe anti syphon pipe etc complete all as specified and directed. |
| 69 | S & F in repairs 40mm dia PVC flexible waste pipe, 750mm long fixed to wash hand basin or sink complete all as directed |
| 70 | S & F Sawn neck Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as directed. [Make shall be JAQUAR of Cat No. CQT 23167B or its equivalent] |
| 71 | S & F PVC [SWR] vent cowl for 110mm dia |
| 72 | S & F Chromium plated cast copper alloy, mixer valve for Hot and Cold water connections with an arrangement for shower and one tap complete all as directed. [Make shall be JAQUAR of model No. KUP35117 or its equivalent] |
| 73 | S & F in repairs 15mm bore, Chromium plated Health faucet with 1.2m long Spirochrome flex & wall Hook complete all as directed.[Make shall be JAQUAR of model No. ALD-573 or its equivalent] |
| 74 | M & L for brick work in half brick thick walls using Fly Ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4 including 2 Nos of 8mm dia bars at every fourth course of brick work including dismantling existing brick masonry work complete all as specified and directed. |
| 75 | M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as directed. |
| 76 | M & L for preparation of newly plastered surfaces of walls by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on wall surfaces over two or more coats of Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfacescomplete all as specified and as directed.[Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval.] |
| 77 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick light shade (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 including dismantling existing tiling including cement mortar bedding (but not backing) and removing debris upto a distance of 15Km complete all as specified and directed.Notes: [a] The colour/ shade/ design of tiles shall be as approved by GE.[b] The tile joint shall be kept as 3mm using tile spacers and masking tape shall be provided before applying of the epoxy grout and the surplus grout materials shall be thoroughly cleaned immediately. |
| 78 | M & L for preparation of newly plastered surfaces of ceiling by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on wall surfaces over two or more coats of Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfacescomplete all as specified and as directed.[Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval.] |
| 79 | M & L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in Cement Mortar 1:6including dismantling old stone slabs of any description removing debris upto a distance of 15Km complete all as specified and directed.. [Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded.] |
| 80 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of old concrete and removing debris upto a distance of 15Km complete all as specified and directed. |
| 81 | Use and waste of steel formwork to soffits of suspended slabs rough finished surfaces of concrete flat complete all as specified and directed. |
| 82 | S & F HDPE / PVC loft water storage tank Rectangular shape with closed top 250 litres capacity, hoisted and fixed in position including 20mm dia PTMT ball valve including taking down old tank complete all as specified and directed. |
| 83 | M & L for 18 mm thick factory made ready to install, non toxic, lead & cadmium free, single extruded, water proof, fire retardent and with excellent screw holding capacity , solid HDHMR board, one side decorative acrylic choice lamination and other side balancing white as in cupboard shutter, fixed to frameincluding liping the cut edges with same material finish including dismantling old boarding complete all asspecified and directed. |
| 84 | M & L for Decorative PVC laminate 1 mm thick (+5%) of surface finish, colour and pattern as approved, fixed by machine / heat pressed by approved adhesive as per manufacturers instructions complete all as directed |
| 85 | S & F in repairs stainless steel basket of size 475mmx500mmx100mm of grade SS-304 with external width 475mm as in kitchen drawers (for Cuttlery basket, Cup and saucers etc) modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to 18mm thick PVC board with 0.9mm thick decorative laminate approved shade fixed on both sides with all fixing accessories complete all as specified and directed. |
| 86 | S & F in repairs stainless steel basket of size 475mmx500mmx200mm of grade SS-304 with external width 475mm as in kitchen drawers (Plain wire basket) modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to 18mm thick PVC board with 0.9mm thick decorative laminate approved shade fixed on both sides with all fixing accessories complete all as specified and directed. |
| 87 | S & F in repair stainless steel (manual type) sliding/telescopic channel of length 20\"(500mm) with 3 Nos of holding ball of load carrying capacity 45-50 Kg of SS-304 grade steel, width 45mm including necessary fixing arrangement complete all as specified and directed. |
| 88 | S & F in repairs cold rolled nickel plated steel O crank soft closing concealed hinge (15-22mm) including necessary fixing arrangement to shutter complete all as specified and directed. |
| 89 | S & F in repairs stainless steel ventilator/ grill of size 100mmx100mm for cupboard shutter including necessary fixing arrangement to shutter complete all as specified and directed. |
| 90 | S & F in repairs stainless steel modular kitchen handle, 100mm long with necessary fixing arrangement complete all as specified and directed. |
| 91 | S & F in repairs Sink with drainage board made of stainless steel 1 mm thick (SS-304) kitchen or laboratorywith plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or includingfixingcantilever brackets and connecting union to pipe overall size 915 mm x 460 mmbowl size 410 mmx 330 mm x 160 mm complete all specified and directed |
| 92 | M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as directed. |
| 93 | M & L for complete removal of existing treatment and preparation of old decorated surfaces of walls by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on wall surfaces over two or more coats of Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfacescomplete all as specified and as directed.[Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval.] |
| 94 | Taking down shutters of area not exc 1.5 Sqm each complete all as specified and directed. |
| 95 | M & L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified |
| 96 | S & F mild steel work as in Bands, straps, hold fasts, stiffners for fencing posts, struts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 97 | M & L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed |
| 98 | S & F35mm thick, factory made Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares and rebated sash bars any numbers, edges of framing plain, chamfered or round ed, fitted with cut beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I and fitted to Chowkats complete all as specified and as directed. |
| 99 | M & L for 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 100 | M & L for 2nd class hardwood 35mm thick Factory made, plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically presure treated fitted to chowkats complete all as specified and directed. |
| 101 | S & F Stainless steel Butt hinges, 75mm size medium weight complete all as specified and directed. |
| 102 | S & F 2nd class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary\" labours; articles n exc 200 Cu. Cm each complete all as directed. |
| 103 | S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed. |
| 104 | S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed. |
| 105 | S & F Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed. |
| 106 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed. |
| 107 | M & L for preparation of old or previously treated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as directed. |
| 108 | S & F new night latch of size 100x67x26mm, 7 levers of make GODREJ or equivalent |
| 109 | S & F floor door stopper of aluminium body and tongue anodised with hand drawn steel spring fixed in flooroverall length of cover plate 150mmcomplete all as specified and as directed. |
| 110 | S & F Continuous (piano) hinges, Stainless steel, bright finish or electrogalvanised width of flap 30mm (when open) |
| 111 | S & F Bearing rollers for sliding of dressing table glass shutters complete all as directed |
| 112 | S & F Magnetic catch PVC body 25 to 40mm size for cup board shutters complete all as directed |
| 113 | S & F looking mirror of selected quality glass 5mm thick for built in gents / ladies dressing table complete all as specified and directed. |
| 114 | S & F Hasp and staple, 125mm size aluminium, including bolt to hinge plate and fixed with screws complete all as directed |
| 115 | M & L for 25mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded stone aggregate as in sub base of floors complete all as specified and as directed. |
| 116 | M & L for 75mm thick, PCC 1:3:6, type C-2, using 40mm graded stone aggregate as in plinth protection laid to slope in panels including joints filled with mastic filling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 117 | S & F fancy type aluminium powder coated curtain rod of 25mm dia including PVC rings @ 100mm c/c with globe type brackets matching with curtain rod complete all as directed by the Engineer-in-Charge. [Make shall be MARVEL brand (legend series) manufactured by M/s Accumax interior products Pvt Ltd or its equivalent as approved by GE] |
| 118 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litres capacity, triple layered, hoisted and fixed in position including 20mm dia PTMT ball valve including taking down old tank complete all as specified and directed. |
| 119 | M & L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 10mm thick backing coat in Cement Mortar 1:4 in vertical surfaces including dismantling old stone slabs of any description including removing debris upto a distance of 15 Km complete all as specified and as directed. |
| 120 | M & L for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings in RCC 1:2:4, type B-0 using 12.5mm graded stone aggregate set in CM 1:4 including dismantling old RCC jallies complete all as directed |
| 121 | S & F in repairs Bottle trap of 32mm dia PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) complete all as directed |
| 122 | M & L for Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, rendering 10mm thick in cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions for levelling the surface smooth and applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sqm over a coat of water based bituminous primer @ 100 gm/Sqm, laying Polymeric water proofing membrane of weight not less than 3.00 Kg per Sq.m reinforced with polyester non-woven fabric of weight notless than 150 Grams per Sq.m, by torch application with side over lap of 100mm & end over lap of 150mm & tucked into the chases on vertical surfaces by thermo fusion complete including taking down existing Roof treatment of any description and rremoval of debris out side MD land upto a distance of 15 Km complete all as specified and directed by the Engineer-in-Charge |
| 123 | M&L for providing roof cooling ceramic tiles of size 300 x 300 mm, 9 to 10 mm thick, SRI value more than 90 conforming to IS 15622, set and jointed in cement slurry and pointed flush with epoxy mortar to match the shade of the tile including screed bed or bedding layer of mortar 10 mm thick in Cement Mortar 1:4 complete all as specified and as directed. [Notes: The colour/ shade/ design of tiles shall be as approved by GE.] |
| 124 | M & L for providing 25mm thick (Avg) PCC 1:2:4, type B-0 using 12.5mm thick as in levlling course duly mixed with and including water proofing compound to receive water proofing treatment complete all as directed |
| 125 | M & L for Cutting / Chipping the spalled loose concrete of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Nito Bond AR of M/s Fosroc chemicals or equivalent as per manufacturer\"s instructions and providing pressure Guniting average 20mm thick at a pressure of not less than 6 KG / Sqcm in CM 1:3 duly mixing the mortar with and including suitable bonding agent of Fosroc chemicals or its equivalent @ 5% by weight of cement, finishing the surface rough conforming to proper geometrics to match with the existing surface including providing double scaffolding and safety measures as required and removal of the same on completion and disposal of demolished materials / debris outside MD land upto a distance of 15 Km complete all as specified and as directed. |
| 126 | M & L for Cutting / Chipping the spalled loose concrete of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Nito Bond AR of M/s Fosroc chemicals or equivalent as per manufacturer\"s instructions and providing pressure Guniting average 30mm thick at a pressure of not less than 6 KG / Sqcm in CM 1:3 duly mixing the mortar with and including suitable bonding agent of Fosroc chemicals or its equivalent @ 5% by weight of cement, finishing the surface rough conforming to proper geometrics to match with the existing surface including providing double scaffolding and safety measures as required and removal of the same on completion and disposal of demolished materials / debris outside MD land upto a distance of 15 Km complete all as specified and as directed. |
| 127 | M & L for Cutting / Chipping the spalled loose concrete of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Nito Bond AR of M/s Fosroc chemicals or equivalent as per manufacturer\"s instructions and providing pressure Guniting average 40mm thick at a pressure of not less than 6 KG / Sqcm in CM 1:3 duly mixing the mortar with and including suitable bonding agent of Fosroc chemicals or its equivalent @ 5% by weight of cement, finishing the surface rough conforming to proper geometrics to match with the existing surface including providing double scaffolding and safety measures as required and removal of the same on completion and disposal of demolished materials / debris outside MD land upto a distance of 15 Km complete all as specified and as directed. |
| 128 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in columns, pillars, etc. including demolition of existing reinforced concrete and removing debris upto a distance of 15Km complete all as specified and as directed. |
| 129 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in fins, facia, louvers, parapets and railings exc 60cm in height and the like including demolition of existing reinforced concrete and removing debris upto a distance of 15Km complete all as specified and as directed. |
| 130 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in chajjas and the like including demolition of existing reinforced concrete and removing debris upto a distance of 15Km complete all as specified and as directed. |
| 131 | M & L for RCC 1:2:4, type B-1 using 20mm graded stone aggregate as in beams and lintels and the like including demolition of existing reinforced concrete and removing debris upto a distance of 15Km complete all as specified and as directed. |
| 132 | Use and removal of steel formwork to chajjas including edges, rough finished surfaces complete all as specified and directed. |
| 133 | Use and removal of steel formwork to sides and soffits of floor or roof beams, beam launchings, lintels,cantilevers, shelves including supports, overhangs, etc, splays between floors and beams and similar works for rough finished surfaces of concrete complete all as specified and as directed. |
| 134 | Use and removal of steel formwork to concrete columns of square or rectyangular for rough finished surfaces of concrete complete all as specified and as directed. |
| 135 | Use and removal of steel formwork to fins, Facia, louvers including rough finished surfaces complete all as specified and directed. |
| 136 | M & L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as directed. |
| 137 | Taking down shutters of area exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed. |
| 138 | M & L for double charged, dark shade, vitrified coloured ceramic tiles 10mm thick (square/rectangular), area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, as in floors set and jointed neat with epoxy grout and masking tape shall be put before putting the epoxy grout, (3mm joint filling shall be done using 3mm thick PVC spacers) grout shall be througly cleaned immediatlely and pointedin white or coloured to match the shade of the tile and laid over and including 15mm thick screed bed in CM 1:6 including dismantling existing floor tiles with backing and removing debris upto a distance of 15Km complete all as specified and as directed. |
| 139 | M & L for double charged, dark shade, vitrified coloured ceramic tiles 10mm thick (square/rectangular), area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, as in vertical surfaces such as dado / skirtings set and jointed neat with epoxy grout and masking tape shall be put before putting the epoxy grout, (3mm joint filling shall be done using 3mm thick PVC spacers) grout shall be througly cleaned immediatlely and pointedin white or coloured to match the shade of the tile and laid over and including 10mm thick backing coat in CM 1:4 including dismantling existing floor tiles with backing and removing debris upto a distance of 15Km complete all as specified and as directed. |
| 140 | S & F in repairs Seamless False Ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including fixing 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including applying two coats of plastic emulsion paint over a coat of primer on exposed ceiling board including dismantling old ceiling board with frame work complete all as specified and directed |
| 141 | M & L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including dismantling old structural steel work complete all as specified and directed. |
| 142 | S & F in repairs Mild steel, plain, black sheet 0.80mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as directed |
| 143 | M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm in width or girth and applying one coat of aluminium paint complete all as specified. |
| 144 | M & L for 40mm thick, PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in flooring, finished even and smooth without using extra cement including demolition of old concrete flooring including removing debris upto a distance of 15Km complete all as specified and directed. |
| 145 | M & L for providing Glass dividing strips 3mm thick, 38mm wide insereted in position complete all as directed |
| 146 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling old rusted stainless steel work complete all as directed. |
| 147 | SCHEDULE \"A\" PART-II [E/M Works]:M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area)1100V grade drawn through and including concealed PVC conduit of size 20mm dia medium grade including accessories fixed on wall/floor/roof, etc including provision of flush type metal GI boxes with modular cover plates, provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan point / Bell point controlled by one, one way switch including taking down old point wiring with fixtures and fittings complete all as specified and directed. [Note: Quoted rate is deemed to be inclusive for cutting through wall, chasing, pinning in making good to the disturbed surfaces whrever required] |
| 148 | All as per item No. 148 above but suitable for one light point controlled by two 02 way switches |
| 149 | All as per item No. 148 above but suitable for one 5/6 Amps socket outlet point controlled by one switch on the same board |
| 150 | All as per item No. 148 above but suitable for one 5/6 Amps socket outlet point controlled by one switch on independent board |
| 151 | All as per item No. 148 above but point wiring with PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 2.5 Sqmm (nominal area) suitable for one 15 Amps power point on independent board complete all as specified and directed. |
| 152 | All as per item No. 148 above but point wiring with PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 4.0 Sqmm (nominal area) suitable for power point on independent board complete all as specified and directed. |
| 153 | S & F modular switch single pole, 1 way, 6 Amps, 1 module |
| 154 | S & F modular switch single pole, 2 way, 6 Amps, 1 module |
| 155 | S & F ceiling rose, 3 terminals, PVC/ polycarbonate, isolated body complete all as specified and directed |
| 156 | S & F modular socket outlet, 6 Amps, 2/3 pin combined 2 module |
| 157 | S & F modular socket outlet, 6/16 Amps, 2/3 pin combined 2 module |
| 158 | S & F modular electronic fan regulator, socket type, 2 module complete all as specified and directed. |
| 159 | S & F modular bell push flush type 6 Amps, one way, 1 module |
| 160 | S & F Calling bell, ding dong AC, 230 Volts, single pole |
| 161 | S & F Telephone jack deluxe with shutter line with metal box |
| 162 | S & F Computer / LAN Jack Cat 6 with shutter with metal box |
| 163 | S & F TV Socket outlet with metal box mini |
| 164 | S & F in repairs 20mm dia Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. Complete all as directed. |
| 165 | S & F SRCD protected socket, steel enclosure with two pin and earth plug and socket with 20 amps MCB SP complete all as specified and as directed.Make :-Havells cat part No. DHDDCDP025202003 or its equivalent. |
| 166 | M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 2.5 Sqmm, drawn through and including 20mm dia concealed PVC conduit and conduit accessories including provision of 1 run of 2.5 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 2.5 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length.] |
| 167 | M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 4.0 Sqmm, drawn through and including 20mm dia concealed PVC conduit and conduit accessories including provision of 1 run of 4.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 4.0 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length.] |
| 168 | M & L for sub main wiring with 4 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 10.0 Sqmm, drawn through and including suitable size PVC conduit and conduit accessories including provision of 1 run of 10.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 5 runs of 10.0 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length.] |
| 169 | Taking down existing Ceiling Fan of any description and capacity from its original position and refixing the same in position after repairs to buildings after carrying out necessary servicing, cleaning, greasing including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of suitable size, replacement of minor spares such as capacitor, canopy, cotter pin, rubber bushes, nuts & bolts, washers and spray painting with one coat of synthetic enamel paint of approved colour duly filling the cavities with filler complete all as specified and as directed. |
| 170 | Taking down existing Exhaust Fan of any description and capacity from its original position and refixing the same in position after repairs to buildings after carrying out necessary servicing, cleaning, greasing including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of suitable size, replacement of minor spares and spray painting with one coat of synthetic enamel paint of approved colour duly filling the cavities with filler complete all as specified and as directed. |
| 171 | S & F in repairs Vertical DB double door for provision of Four Pole MCCB upto 125 A incomer 8 Way 24 outgoing with IP-43 protection complete all as directed. |
| 172 | S & F in repairs 4 Pole MCCB, 125 Amps, 50 Hz, with rupturoing capacity 25 KA |
| 173 | S & F in repairs MCB DB, TPN, 4 Way, 415 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wallcomplete all as specified and as directed. |
| 174 | S & F in repairs MCB, TP, 63 Amps, 415 Volts, 10 KA, C series |
| 175 | S & F in repairs MCB, SPN, 32 Amps, 240 Volts, 10 KA, C series |
| 176 | S & F in repairs MCB, SP 6 to 32 Amps, 240 Volts, 10 KA, C series |
| 177 | S & F in repairs MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wallcomplete all as specified and as directed. |
| 178 | S & F Low density polyethylene pipes (LDPE) single socketed of 50mm bore with rubber ring joints fixed to walls inclusive of all accessories with fixing arrangements complete all as directed |
| 179 | S & F in repairs Building Security light LED type of 35 Watts new generation energy saving & environmental friendly long life made up of Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 32mm dia GI light grade pipe of 1.5m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted complete all as specified and as directed by the Engineer-in-Charge. |
| 180 | Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected with galvanised earth wire 4.0mm dia as earth lead by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including taking out old perished earth pits complete all as directed.[Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS angle iron frame 40x40x6mm, RCC 1:2:4 type B-1 cover 40mm thick with 8mm dia steel reinforcement bars at 150mm c/c both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 15mm dia, earthing lead upto 7.5m including taking down old earrthing sets complete all as specified in preambles of SSR Part-II and as shown in plate No. 3 of SSR Part-I.] |
| 181 | Taking down existing Energy meter three phase from its original position and refixing the same in position after repairs to buildings after carrying out necessary servicing, cleaning including making up connections complete all as specified and as directed. |
| 182 | S & F in repairs Aluminium strip 25 x 3.15mm for lightning conductor with saddles and fixing screws etc. for roof conductors and down conductors laid in trench/ floor including necessary clamps, nuts, bolts, and hylem sheet block complete all as directed |
| 183 | S & F in repairs GI strip of size 32x6mm for lightning conductor with saddles and fixing screws etc. for roof conductors and down conductors laid in trench/ floor including necessary clamps, nuts, bolts, and hylem sheet block complete all as directed |
| 184 | S & F in repairs Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed. |
| 185 | S & F Test terminal box of size 175x150x100mm made out of 2mm thick hot dip galvanised sheet drilled and screwed including 4 Nos 25mm long hexagonal head screwed with test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw complete all as directed |
| 186 | Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected with GI earth strip 32x6mm as earth lead by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including taking out old perished earth pits complete all as directed.[Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS angle iron frame 40x40x6mm, RCC 1:2:4 type B-1 cover 40mm thick with 8mm dia steel reinforcement bars at 150mm c/c both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 40mm dia, earthing lead upto 7.5m including providing charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the electrode complete all as specified in preambles of SSR Part-II and as shown in plate No. 3 of SSR Part-I.] |
| 187 | Notes for all the above items of BOQ: [i] Tenderers to note that scope of work under some of the above items shall be executed in the buildings of varying heights upto 04 floors. Provision of necessary scaffolding & ensuring safety measures as directed by the GE are deemed to be included in the unit rates quoted by the Contractor. Quoted rates are also include for Washing floors, cleaning glass, joinery, electric fittings, wiring, etc. of drops and splashes and leaving premise, clean and tidy. Tenderers are advised to visit the site of work prior to submit their bid online. No extra claim whatsoever on account of height of buildings is admissible at later stage.[ii] All the debris obtained from demolition / dismantling and taking down shall be removed from the site and disposed out side MD land upto a distance of 15 Km. Tenderers quoted rates under relevant items are deemed to include for this aspect also and nothing extra shall be paid in this regard. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail