|
| 1 | Dismantling, floor any type, hearth or wall tiling including cement mortar bedding (but not backing) andrubbish off the premises, complete all as specified and directed. |
| 2 | M&L for Non - skid Ceramic colour tiles tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.20mm screed bed in cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement, complete all as specified and directed. |
| 3 | M&L Non- skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including laying screed bed or bedding layer of mortar 20mm thick in cm 1:6, complite all as specified and directed. |
| 4 | M&L for glazed ceramic coloured tiles in vertical surface 350 x250 x 7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:4, complete all as specified and directed. |
| 5 | M & L for non skid Heavy duty Endura tile 400x400x12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over and including 15mm thick screed in CM 1:4, complete all as specified and directed. |
| 6 | M&L for granite (of any type) 16 to 20mm thick machine cut, bedded and jointed with white cement with admixture of pigmewnt to match the shade of granite stone incld griding and polishing including 15 mm thick screed bed in CM(1:6), complete all as specified and directed. |
| 7 | Taking down chowkhats or frames n. exc 1.5 sqm each (without taking off shutter from the frame), complete all as specified and directed. |
| 8 | All as per item No 7.00 here inbefore butexc. 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. |
| 9 | S & F of mild steel framed work such as door frame, grills, grating hold fast etc. with ends of bar shoulder and/or riveted, or forged into spikes, framed guard bar including necessary welding, drilling hole, complete all as specified and directed. |
| 10 | S&F of flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides of thickness 30 mm, complete all as specified and as directed. |
| 11 | S & F of 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and all as specified and directed. |
| 12 | S&F of solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed. |
| 13 | S & F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frameshall be covered with heat moulded plain colour PVC \"C\" channelhaving a PVC sheet strip of 20mm width stuckinside with solventcementfor stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frameat siteas per specification & drawing, complete all as specified and directed. |
| 14 | S&F of Aluminium window/ventilator (Powder coated ) double leaf /three leaf with anodized aluminium frame sliding/openable including wheel powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of builders hardware fittings necessary and gazing with 5mm thick ordinary plain glass including wire mesh shutter necessary fittings fixuters & aluminium snap beads, complete all as specified and directed. |
| 15 | Supply & fixing of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapples,complete all as specified and directed. |
| 16 | S & F of 125 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., supplied and fixed, complete all as specified and directed. |
| 17 | S&F of 100mm butt hinges, medium wieght, cold rolled mild steel , complete all as specified and directed. |
| 18 | S&Fof 100mm Aluminum hinges, complete type B-21, complete all as specified and directed. |
| 19 | S & Fof 200 mm long aluminium anodised barrel tower bolts ISI marked of extruded section and fixed, complete all as specified and directed. |
| 20 | S & F of150 mm size aluminium handles \"D\" Type ISI brand cast type, anodised, complete all as specified and directed. |
| 21 | S & F of 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed, complete all as specified and directed. |
| 22 | M & L for applying two coats of synthetic enamel paint on new or oldwooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces, complete all as specified and directed. |
| 23 | M & L for applying two coats of synthetic enamel paint on newsteel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces, complete all as specified and directed. |
| 24 | S & F in repair 25 mm dia MScurtain rod, PVCcoated with a pair of finial & with brackets fixed with 65mm long screw with rawlplug, approved by GE, complete all as specified and directed. |
| 25 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed. |
| 26 | M&L for brick work with sub class \"B\" modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 27 | Taking down existing cementplaster in any position including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 28 | M & L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and fair without using extra cement, complete all as specified and as directed. |
| 29 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair, complete all as specified and directed. |
| 30 | M&L for rendering 5 mm thick on concrete surfaces in ceiling, in cement and sand mortar 1:3top surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 31 | M&L for 15 thick rendering on surface other than fair faces on brick wall or stone wall in CM 1:4 finishing the surface fair and even, complete all as specified and directed. |
| 32 | M&L for preparation of new/old plastered surfaces of walls and distempering with distemper oil emulsion, two coats, white or tinted over a coat of alkaline resistant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes, complete all as specified and directed. |
| 33 | M&L for preparing new surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying twocoatswith cement base paint, white or tinted includingwashing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes, complete all as specified and directed. |
| 34 | M&L for preparing old surface painted surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying twocoatswith cement base paint, white or tinted including Washing, rubbing down and stopping of painted surfaces washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes, complete all as specified and directed. |
| 35 | M&L for preparation of New plastered or unplastered surafces of ceilings and applying three coats of white wash on ceilingincluding washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes, complete all as specified and directed. |
| 36 | M&L for preparation of old plastered or unplastered surafces of ceilings and applying three coats of white wash on ceilingincluding Washing, rubbing down and stopping of distempered and painted surfaceswashing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes, complete all as specified and directed. |
| 37 | S&F of soft rubber beading size 35 x 4mm fixed with nails or suitable adhesive, complete all as specified and directed. |
| 38 | Taking up or down existing steel tubing and connection and removingcomplete for 15 mm dia complete all as specified and directed. |
| 39 | S&F of jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete for 15mm dia bore, complete all as specified and directed. |
| 40 | Taking up or down existing steel tubing and connection and removingcomplete for 20 mm dia, complete all as specified and directed. |
| 41 | S&F of jointing and testing galvanised iron tube, medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling or laid in complete all as specified and directed floors for 20mm dia, complete all as specified and directed. |
| 42 | S&F of kitchen sinks without drainage board overall size 495 x 420 with bowl size 410mm x 330mm x 160mm, made of stainless steel 1mm thick with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe and coupling, complete all as specified and directed. |
| 43 | Taking down soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks,bends etc., complete all as specified and directed. |
| 44 | S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors/wall, complete all as specified and directed. |
| 45 | S&F of PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors/wall, complete all as specified and directed. |
| 46 | S&F of 110mm bore PVC (SWR) bends, of any radius provided without access door, complete all as specified and directed. |
| 47 | All as per item No. 46.00 as above but 75mm bore, complete all as specified and directed. |
| 48 | Easing of door shutters for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each, complete all as specified and directed. |
| 49 | Easing of door shutters for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc2 Sqm each, complete all as specified and directed. |
| 50 | Cleaning and removing of all scales and dirts etc. from PVC tanks size exc 250ltrs but not exc 500 ltrs and from mouth of circulating pipes of any dia etc. Repair to minor cracks repairs, stopping leaking of inlet/outlet with cement paste cleaning date shall be painted on each tank nearly, all as specified and directed by Engr-in-Charge. |
| 51 | Dismantling PVC water tank and removing from the site capacity in ltrs exc500 & n.exc 1000 ltrs, complete all as specified and directed. |
| 52 | M&L for rotational moulded polythelene water storage tank 500 ltrs capacity double layer cylenderical vertical with closed top hoisted & fixed in position including all as spd & direction, complete all as specified and directed. |
| 53 | S&F Ballvalves, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule, complete all as specified and directed. |
| 54 | M&L for PVC floor traps plain with graiting including jointing with solvent cement 75 mm bore, complete all as specified and directed. |
| 55 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers,complete all as specified and directed. |
| 56 | S&F in repair vitreous china, wash hand basin white flat back size 550x400mm white complete waste, chain and plug and procelain stopper including bracket, complete all as specified and directed. |
| 57 | S&F in repair vitreous china squating pan \"Orisa\" patern size 580x440mm white with \"P\" or \"S\" trap front or back inlet with integral foot rest (excluding flushing cistern and flush pipe), squating pan including connection to trap and flushing pipe, anit syphonic pipe etc complete incl making good to floor, complete all as specified and directed. |
| 58 | S&F in repairs PVC low level flushing cistern 10 ltr capacity complete with flush pipe of standardincluding taking down old fitting fixture, complete all as specified and directed. |
| 59 | S&F in repairs 15mm bib tap cast copper alloy (Chromium plated) fancy type with crutch or butter fly handle screwed down, screwed for iron pipe or brass firul and fixed, complete all as specified and directed. |
| 60 | S&Fin repair 15mm pillar taps, cast copper alloy with capstan head, chromium plated fancy type screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, scsrewed for iron pipe and fixed, complete all as specified and directed. |
| 61 | S&F in repaire stop valve, 15 mm dia cast copper alloy, chromium plated with fancy type (angle type) screwed down, high pressure, screwed both ends for iron pipes, complete all as specified and directed. |
| 62 | S&F in repairPVC connection 15 mm size with PTMT nut of length 600 mm, complete all as specified and directed. |
| 63 | M&L for 75 mm thick cement concrete type C-2, 1:3:6, 40mm graded crushed stone aggregates as in plinth protection, finished concrete surface even & smooth without using extra cement, complete all as specified and directed. |
| 64 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 65 | M&L for precast cement concrete 1:2:4 type C1 using 20 mm graded stone aggreagate as in landing , cover slab(for manholes, etc) chulla hoods, chajjas, water through, mangers shelves and similar articles including form work, complete all as specifeid and directed. |
| 66 | Mild steel TMT bars 6 mm dia and over, upto and including 10mm dia,cut to length, bent to shape required, including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 67 | M& L for 19/20 mm thick block boards grade 2 quality interior grade, commercial type fixed with screw to timber frame work as incup board shutter / shelves/cabinetfixed as in repair including both side decorative laminate of thickness 0.9mm type1 of surface finish, colour and pattern as approved, fixed with approved adhessive as per manufacturer\"s instructions and wooden leaping 5mm thick all round , including continuous (piano) hinges, mild steel,bright finish, width of flaps (when open) 3mm with welding the same along with existing steel door frame with nails to timbar frame and etc., complete all as specified and as directed. |
| 68 | S&F of Solid PVC Wall Lining consisting of 5mm thick coloured PVC ( as approved by engineer in charge) sheetinclusive of solvent cement and fixing at site on PVC frame as per specifications anddrawing all as spd and directed. |
| 69 | S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.all as spd and directed by engineer in charge |
| 70 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. gaps at junctions, i.e. at top bottom andsideswithrequired EPDM rubber/ neoprene gasket, complete all as specifeid and directed. |
| 71 | Supply and Fixing of sheet glass 5.5mm thick frosted ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane, complete all as specifeid and directed. |
| 72 | S&F of Aluminum Composite Panel sheet for fixing in aluminium partition or in ducting of required thickness shapesizeand colour, complete all as specifeid and directed. |
| 73 | Preparation of old plasteredsurfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm), complete all as specifeid and directed. |
| 74 | Taking down carefully aluminium battenpoint, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i)Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii)Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii)Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. |
| 75 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI markedand including provision of 1.5 sqmm PVC insulated copper cable FRLSH as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:- |
| 76 | (a)One light/fan/bell point controlled by one switch single pole one way, complete all as specifeid and directed. |
| 77 | (b) All as per item No 75.01 here-in-before butone3 pin 6 amp switch socket out let on independent board, complete all as specifeid and directed. |
| 78 | (c) All as per item No 75.01 here inbefore but one 3 pin 6 amps socket outlet on the same board with other switch, complete all as specifeid and directed. |
| 79 | All as per item No 75.02here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.4 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board, complete all as specifeid and directed. |
| 80 | Supply and fix of switch modular flush 6A single pole one way ISI marked, complete all as specifeid and directed. |
| 81 | Supply and fix of modular sockets 6 Amp 2 in 1 2/3 pin combined, complete all as specifeid and directed. |
| 82 | Supply and fix of switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked, complete all as specifeid and directed. |
| 83 | Supply and fix of modular sockets 16Amp 2 in 1 3/5pin combined, complete all as specifeid and directed. |
| 84 | Supply and fix of ceiling rose surface bakelite 60x25mm three terminal, complete all as specifeid and directed. |
| 85 | Supply & fix of MCB DB SPN 4 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting, complete all as specifeid and directed. |
| 86 | Supply and fix MCB, single pole and neutral, 230 volts, 40 to 63 Amp rating, \"C\" series fixed in DBs catered here-in-before, complete all as specifeid and directed. |
| 87 | Supply and fix MCB SP 6-32 Amps 240 volts 10 KA 50 HZ \"C\" curve, complete all as specified and directed by Engineer in charge. |
| 88 | supply and fix connecting and testing LED street light 35 watt 6000k/3000k new generation energy saving and environmental friendly long life led street light made up of pressure die cast aluminium housing with high efficient led as lighting source and PC cover having toP opening seperate driver compartment with IP66 protection and impact resistance of IK07 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 40mm dia GI pipe as bracket in appropriate length, complete including taking down old light fitting. |
| 89 | Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLSH, 1100 Volts gradecable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLSH 1100 volts grade cable continuous earth wire of green colour code, complete all as specifeid and directed. Note:- (a) Two runs of6 sqmm cable and one run of 6 Sqmm cable as earth leadwith conduit shall be measured as one unit length for payment.(b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish. |
| 90 | S & F of sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two Pin and earth plug and socket complete with one single pole MCB, 240 V, 20 Amp, complete all as specifeid and directed. |
| 91 | Supply and fixing of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifeid and directed. |
| 92 | Supply and fixing LED Light fitting mirror type with high out put diffuser 2 feet ,10watt ,220 v AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specifeid and directed. |
| 93 | Supply and fixingin repair Ventilating Fan250mm sweep,non metallic resin body,single phase 240 volts AC 50 Hz including louvers,and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan, complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard. |
| 94 | Supply and fix of exhaust fan, steel body AC single Phase. 230V of size 300m sweep heavy duty 1400 RPM with, blades, and frame and louvers complete with all accessories for hang and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose, complete all as specifeid and directed. |
| 95 | S&F of factory made epoxy powder coated Distribution board (MCCB DB) TPN 4 way vertical type, IP - 43 Protection made out of min 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and suitable for TPN MCCB 125/160 Amps as incomer and 12 SP or 04 Nos TP MCBS as outgoing complete all as specified and confirming to IS : 8623, complete all as specifeid and directed. |
| 96 | Material, labour jointing & testingXLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 core including making connection with suitable size of cable gland, aluminium lugs etc complete including taking down old U/S cable, complete all as specifeid and directed. |
| 97 | Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes complete, complete all as specifeid and directed. |
| 98 | Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 mm thick, complete all as specified and directed. |
| 99 | Removal of excavated material to a distance not exc 50 Meter and depositing wheredirected at a level not exc 1.5 M above the starting point, complete all as specified and directed. |
| 100 | Supplying, laying and sand cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning, complete all as specified and dierected. |
| 101 | Supplying, laying sub class \"B\" bricks old size with axis of the bricks perpendicularto the axis of the cable as in cable protection, complete all as specified and directed. |
| 102 | Supply & Fixingin replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia, complete all as specified and directed. |
| 103 | Supply and fix in repair MCCB 100 Amps, FP 415 volts 25 KA 50 HZ with thermal magnetic setting, complete all as specified and directed by Engineer in charge. |
| 104 | Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia asearth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes(i)The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I(ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire andGI pipe for protection of earth wire. Any varriation in quantity shall be adjusted. |
| 105 | Cutting the existing wall/removing existing steel bar to make a hole for fixing of ventilation fan through packing of wooden ply to support the ventilating/ air circulating fan including necessary nut and bolts of suitable size incl making good of disturbed surface, complete all as directed by Engr-in charge. |
| 106 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
