|
| 1 | Demolition of Concrete in roof padding, lime concrete / mud puska or any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 2 | M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work, complete all as specified and directed. |
| 3 | M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in leveling course to floor, complete all as specified and directed. |
| 4 | Supply and Application of 5 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leakingconcrete roof surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followedby one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min.50% solids, filling and sealing the cracks, then over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coathaving +450% Elongation. The surface is then to be tested for water tightness with ponding test for min. 2 days and then top coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, antibacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 100 - 120microns using brush, roller, airless spray gun as applicable. The application is to be done by company approved applicator only. |
| 5 | Dismantling, floor any type, hearth or wall tiling including cement mortar bedding (but not backing) andrubbish off the premises, complete all as specified and directed. |
| 6 | M&L for vitrified ceramic tiles 10mm thick dark shade(square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer\"s instructions Over & including screed bed or bedding layer 15mm thick in CM (1:6), complete all as specified and directed. |
| 7 | All as per item No 6.00 here inbefore but skirtingincluding10 mm thickrendering in cement mortar 1:4, complete all as specified anddirected. |
| 8 | S&F of glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350/7mm thick set and jointed in neat cement slurry and pointed inwhite or colour cement to match rendering 10 mm thick in CM 1:4 on vertical surface as in backing coat, complete all as specified anddirected. |
| 9 | M&L for Non- skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including laying screed bed or bedding layer of mortar 15mm thick in cm 1:6, complite all as specified and directed. |
| 10 | M & L for Granite18- 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of graniteflooringincluding 20 mm thick screed bedding in cement mortar 1: 6 and all other similar works, complete all as specified and directed. |
| 11 | Taking down chowkhat or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each, complete all as specified and directed. |
| 12 | All as per item No 11.00 here inbefore but exc. 1.5 Sqm and not exc. 4 Sqm, complete all as specified and directed. |
| 13 | S & F of Aluminium window/ventilator (Powder coated ) double leaf /three leaf with anodized aluminium frame sliding/openable including wheel powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of builders hardware fittings necessary and gazing with 5mm thick ordinary plain glass including wire mesh shutter necessary fittings fixuters & aluminium snap beads, complete all as specified and directed. |
| 14 | M&L of powder coated anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50mm and bottom rail150.00X 44.50 X 2.50mmincl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos,aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stoper 01 Nos, jointing cleats,glazing cleats,rubber packing , anodised aluminium shape beading, screws etc with panelling in two parts with12mm thick prelaminated partical board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture, complete all as specified and directed. |
| 15 | M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 410-0 or Fe 310-0, complete all as spesified and directed. |
| 16 | Dismantling of Wallandceilingboards(fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 17 | Providing & fixing false ceiling at all height with GRG (Glass Fibre reinforced Gypsum) false ceiling tile of size 595x595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%,NRCO.50 to 0.75 as per IS 8225:1987, non combustible as per BS 476(Part4)-1970 and light reflectance of 85% (minimium) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dripped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per Sqm including both sides) comprising of main T-runner of size 15x32mm of length 1200mm and sectinally intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600mmx600mm, suspended from ceiling using galvanised mild steel items (galvanised @80 grams per Sqm) i.e. 50mm long,8mm outer diameter M-6 dash fastners 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partitionwith the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engineer in Charge. |
| 18 | S&F of flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides of thickness 30 mm, complete all as specified and as directed. |
| 19 | S&F of solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed. |
| 20 | S & F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frameshall be covered with heat moulded plain colour PVC \"C\" channelhaving a PVC sheet strip of 20mm width stuckinside with solventcementfor stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frameat siteas per specification & drawing, complete all as specified and directed. |
| 21 | S&F of 105 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. supplied and fixed, complete all as specified and directed. |
| 22 | S&F of 100mm Aluminum hinges, complete type B-21, complete all as specified and directed. |
| 23 | S & Fof 200 mm long aluminium anodised barrel tower bolts ISI marked of extruded section and fixed, complete all as specified and directed. |
| 24 | S & F of 150 mm size aluminium handles \"D\" Type ISI brand cast type, anodised, complete all as specified and directed. |
| 25 | S & F of 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed, complete all as specified and directed. |
| 26 | M & L for applying two coats of synthetic enamel paint on new or oldwooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces, complete all as specified and directed. |
| 27 | M & L applying two coats of synthetic enamel paint on newsteel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces, complete all as specified and directed. |
| 28 | S&F of MS flat iron as in hold fast etc and similar work incuding making shape, drilling holes etc, confriming to FE 290 Ged E-165, complete all as specified and directed. |
| 29 | M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in bed plate for fixing holdfast etc., complete all as specified and directed. |
| 30 | S&F of Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames, complete all as specified and directed. |
| 31 | S&F of drapery rod 19mm inner dia (wall thickness not less than 1.60mm) stainless steel fancy type bracket fixed with rawl plug or screws on wall/beam and shall be provided with fancy finial at ends as approved by Garrison Engineer, complete all as specified and directed. |
| 32 | S&F of curtain brackets stainless steel with matching with the curtain rod,complete all as specified and directed. |
| 33 | S&F in vitreous china wash hand basin white flat back of size 550mmx400 mm includingcutting forand pinning in ends of brackets or errecting stand but exclusive of fixing ofwaste pipeand CI brackets,complete all as specified and directed. |
| 34 | S & F in repair vitreous china wash down water closet pan (pedastal pattern) white inclPVC (SWR) 110mm\"P’ or \"S\" trap and WC connector (exclusing fixing bolts, flushing cistern and flush pipe), complete all as specified and directed. |
| 35 | S & F in repair plastic water closet seat cover, white closed pattern with flat bottem, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 36 | S&F in repair 10litres PVC,Syphonic action type, Flushing cistern low level ,white with inlet ball valve float chain and pull and brackets, complete all as specified and directed. |
| 37 | Supply and Fix in repair toilet paper holder supar of brass chromium plated fitted to wall with CP/ brass screws, complete all as specified and directed. |
| 38 | S&F in rep Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 39 | S&F of 15 mm bore bib taps, with wall flange long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed downscrewed for iron pipe or for brass furrel complete in repairs, complete all as specified and directed. |
| 40 | S&F of 15 mm bore chromium plated fancy type pillar tap cast copper alloy with capstan heads, screwed down high pressure,with or without leterred\"Hot ot Cold\" with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed. |
| 41 | S&F in repair stop valve brass chromium plated fancy type 15mm bore with wall flange of authentic single lever for iron pipe or for unions, complete all as specified and directed. |
| 42 | S & F in repair Chromium plated stainless steel (Grade S-304)(heavy) grating minimum 3 mm thick of size 125mm dia for trap, complete all as specified and directed. |
| 43 | S & Fin repair Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long, complete all as specified and directed. |
| 44 | S & F in repair looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 45 | Chromium plated brass soap dish (oval shape) to walls (size not less than 125mm long), complete all as specified and directed. |
| 46 | S&F in vitreous china bowl urinal flat back, size of 465x355x265 mm white (minimum), (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs, fixing of flush pipe, waste pipe, grating and connection to water supply pipe, complete all as specified and directed. |
| 47 | S&F in urinal spreader of PTMT any colour for fixing with 15mm dia pipe(minimum weight 60 gms), complete all as specified and directed. |
| 48 | Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster, complete all as specified and directed. |
| 49 | M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling,complete all as specified and directed. |
| 50 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 51 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 52 | Preparation of new plastered surface of wall and applying two coats of ACE exterior paint over 1mm thick wall care putty complete all as specified and directed. |
| 53 | M&L for two coat of oil bound distemper on newly plastered surface on wall over 3mm thick wall care putty, complete all as specified and directed. |
| 54 | Preparation of new plastered surface of ceiling and applying two coat of oil bound distemper over 1.5mm thick putty, complete all as specified and directed. |
| 55 | M&L for complete removing of existing treatment on wall surface and applyingtwo coat of Oil bound distemper over a coat of 2mm thick birla white care Putty on wallobtain smooth finish etc., completeall as specified and directed. |
| 56 | M & L for preparation of old decorated surface of wall and applying two coats of ACE exterior emulsion paintroof or sheet any type and applying(Asian Paint), complete all as specified and directed. |
| 57 | M & L for Preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girthnot otherwise described and applying one coat of synthetic enammel paint with spray painting machine, complete all as specified and directed. |
| 58 | Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 59 | Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 60 | Supply and fixing of 15 mm bore galvanised steel water tubing \"medium grade\" with all fittings and fixed to walls, ceiling or laid in floors etc., complete all as specified and directed. |
| 61 | Supply and fixing of 20 mm bore galvanised steel water tubing \"medium grade\" with all fittings and fixed to walls, ceiling or laid in floors etc., complete all as specified and directed. |
| 62 | M&L for Cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc., complete all as specified and directed. |
| 63 | Dismantling PVC water tank and removing from the site capacity in ltrs exc500 & n.exc 1000 ltrs, complete all as specified and directed. |
| 64 | M&L for rotational moulded polythelene water storage tank 1000 ltrs capacity double layer cylenderical vertical with closed top hoisted & fixed in position including all as spd & direction, complete all as specified and directed. |
| 65 | S&F Ballvalves, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule, complete all as specified and directed. |
| 66 | Dismantling of CI soil, rain water pipes,cast and vent pipes of any dia, any pattern including all fittings, complete all as specified and directed. |
| 67 | S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors., complete all as specified and directed. |
| 68 | S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 69 | S&F of 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 70 | S&F of 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 71 | Demolition of Wallandceilingboards(fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 72 | S&F of 3mm thick Aluminium composite panel cladding using aluminium composite panel sheet of 3mm thick (Vita 25mm aluminiumfoil with PVDF coating) over and including steel frame work,MS Tube (ACP will be fixed over MS tube welded over MS steel framed works) and filling the gaps with silicon , sealant and other material of approved quality etc., complete in all respect as per specification and direction of Engineer-in- charge. |
| 73 | Demoliton of stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc., complete all as specified and directed. |
| 74 | M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete ijncluding 10mm thick rendering CM(1:4), complete all as specified and directed. |
| 75 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m, complete all as specified and directed. |
| 76 | M & L for cement concrete 100 mm thick B-1 (1:2:4) (20mm graded aggregate), complete all as specified and directed. |
| 77 | M & L for non skid Heavy duty Endura tile 400x400x10-12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over and including 15mm thick screed in CM 1:4, complete all as specified and directed. |
| 78 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. |
| 79 | Excavation in trenches for n.exc 1.50m wide not exceeding 10 Sqm on plan and n.exc 1.5m in depth in soft/ loose soil and getting out, complete all as specified and directed. |
| 80 | M&L forPCC 1:4:8 type D-2 (40mm graded aggregate) Cement concrete in foundations filling and mass concrete etc., complete all as specified and directed. |
| 81 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 82 | M&L for RCC M-25Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 83 | M&L for RCC M-2520mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. |
| 84 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed. |
| 85 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed. |
| 86 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 87 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed. |
| 88 | M&L for Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, complete all as specified and directed. |
| 89 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 90 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m, complete all as specified and directed. |
| 91 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 92 | Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 93 | S&F for Rolled mild steel sections conforming to Gde Fe-290 (Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates, complete all as specified and directed. |
| 94 | M & L for Brick work with sub class \"B\" brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed. |
| 95 | Material and Labour for preparing newly & Old plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic)Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator onlyincluding use of scaffoldings from Ground floorupto 04 storeys height of bldgs bldgs, complete all as specified and directed.Make: \"Apex Ulitima\" of Asian Paints \"trucare\" Primer / \"Weather coat all Guard\"of Berger Paints /Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid . |
| 96 | S&F of MS 1.25 mm thick MS plain black sheet in steel gates and similar work, cut to size, holes punched, including round headed screws and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded as required. complete all as specified and directed. |
| 97 | S&F in repair 25 mm dia decorative type cchromium plated anodised aluminiumalloy with fixing brackts and all other connected works, complete all as spesified and directed. |
| 98 | M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6)for laying floor finishes, complete all as specified and directed. |
| 99 | M&L for rendering or bedding layer15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with WPC 2% wt of cementinclduing finishing surfaces even and fair without using extra cement, complete all as specified and directed. (Note: WPC will be measured and paid separately). |
| 100 | M&L for preparation of new surface andapplying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm, complete all as specified and directed. |
| 101 | M&L for applying one coat of aluminium paint at the rate of 100 gms/sqm as per manufacturers instructions over bituminous layer, complete all as specified and directed. |
| 102 | M&L for APP basedpolymeric water proofing membrane minimum weight 3.5 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS),laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer. complete all as specified and directed. |
| 103 | M&L for rendering or bedding layer15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with linesed oil @ 3% wt of cementinclduing finishing surfaces even and fair without using extra cement inclusive linesed oil, complete all as specified and directed. |
| 104 | S&F for steel window with side hung shutters including box type hinges with steel handle and steel peg stay, 02 nos tower bolts complete withglazing bars dovetailed or welded etc, complete all as specifed and directed. |
| 105 | Supply & fixing only Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc, complete all as specified and directed. |
| 106 | Supply & Fixing of 3mm thick figured glasspin head type glazing with oil puttyon metal frame or wooden beads in square n exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 107 | M&L for machine precast concrete Hydraulic pressed rubber moulded interlocking coloured paver block glossy finish any shape and size confirming to IS 15658 – 2006 of 80mm thickness, M-40 grade with grey cement and pigment including 40 mm thick sand cushioning layer, complete all as specified and directed. |
| 108 | M&L for sand filling under floor including watering and consolidation, complete all as specified and directed. |
| 109 | Taking down carefully aluminium battenpoint, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i)Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii)Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii)Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) Exhaust fan and ceiling fan shall be taken down in under separate item of this schedule. |
| 110 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI markedand including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:- Note : Wiring colour code i.e. Red for phase, black for Neutral and green for earth shall be maintained. The rate included for suitable sunken metal flux box cover plate blank plates etc for modulat fittings etc. |
| 111 | (a)One light/fan/bellpoint controlled by one switch single pole one way, complete all as specified and directed. |
| 112 | (b) All as per item No 110.01here-in-before butone3 pin 6 amp switch socket out let independent, complete all as specified and directed. |
| 113 | (c) All as per item No 110.02 here inbefore but one 3 pin 6 amps socket outlet on the same board with other switch, complete all as specified and directed. |
| 114 | All as per item No 110.02 here-in-before but using 02 Nos. 4 sqmm size for main cable and 01 No. 4 sqmm size as earth conductor for one 16 Amp switch socket outlet on independent board, complete all as specified and directed. |
| 115 | All as per item No 110.02 here-in-before but using 02 Nos. 2.5 sqmm size for main cable and 01 No. 2.5 sqmm size as earth conductor for one 16 Amp switch socket outlet on independent board, complete all as specified and directed. |
| 116 | Supply and fix switch modular flush 6A single pole one way ISI marked (One module), complete all as specified and directed. |
| 117 | Supply and fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked, complete all as specified and directed. |
| 118 | Supply and fix modular sockets 6Amp 2 in 1 2/3pin combined (Two Module), complete all as specified and directed. |
| 119 | Supply and fix modular sockets 16Amp 2 in 1 3/4pin combined (Two Module), complete all as specified and directed. |
| 120 | Supply and fix ceiling rose surface bakelite 60x25mm three terminal 240 V grade, complete all as specified and directed. |
| 121 | Supply and fix electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type, complete all as specified and directed. |
| 122 | S&F of LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, system lumen efficiency >90 lumen/watt, 6500kandincluding connectingfrom ceiling rose to fitting, complete all as specified and directed. |
| 123 | S&F LED batten luminaire surface mounted 2 feet system wattage of 10 watts system lumen efficiency >90 lumen/watt, 6500kand including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed, complete all as specified and directed. |
| 124 | S&F of surface /ceiling mounted, round LEDdown light fitting 15 watts with die cast aluminium housing and system wattage of 18W,including connecting up with PVC sheathed 3 core 1.5 Sqmmcopper conductor flexible wire fixed,complete all as specified and directed. |
| 125 | Supply and fix of LED 2 X 2 ft backlite surface mounted fitting 36 Wattsnot less than 3200lm with Metallic CRCA powder coated body,complete all as specified and directed by Engr-in-charge. |
| 126 | M& L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts gradecable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code, complete all as specified and directed. Note:- (a) Two runs of 4.0 sqmm cable and one run of 4 Sqmm cable as earth leadwith conduit shall be measured as one unit length for payment.(b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealconduit and making good to match with existing finish. |
| 127 | Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts gradecable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code, complete all as specified and directed. Note:- (a) Two runs of6 sqmm cable and one run of 6 Sqmm cable as earth leadwith conduit shall be measured as one unit length for payment.(b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish. |
| 128 | S & F of sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two Pin and earth plug and socket complete with one single pole MCB, 240 V, 20 Amp, complete all as specified and directed. |
| 129 | Supply and fix of wall mounted decorativefancy type bedroom light LED type with frosted glass singlemounted on metalic frame with holder including 12 watt LED bulb, complete all as specified and directed. |
| 130 | Supply and fix in replacement MCB, SP, 6 to 32 Amp rating,230 volt, 10 KA,\"C\" seriesfixed in DBs catered herein before, complete all as specified and directed. |
| 131 | Supply and fix of MCB, single pole and neutral, 230 volts, 32/40 to 63 Amp rating, \"C\" series fixed in DBs catered here-in-before, complete all as specified and directed. |
| 132 | Supply & fix of MCB DB SPN 12 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting, completeall as specified and directed. |
| 133 | S &F of Ventilating Fan250 mm sweep, 1250 RPM, non metallic resin body,single phase 240 volts AC 50 Hzand connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm size and making of holegrountig nut & bolt, complete all as specified and directed by engr-in-charge. |
| 134 | Supply and fix in repair wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system, complete all as specified and directed. |
| 135 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep heavy duty 1400 RPM with, blades, and frame and louvers complete with all accessories for hang and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose, complete all as specified and as directed. |
| 136 | S & F of LED light fitting 10 Watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 137 | supply and fix of connecting and testing LED street light 35 watt 6000k/3000k new generation energy saving and environmental friendly long life led street light made up of pressure die cast aluminium housing with high efficient led as lighting source and PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 40mm dia GI pipe as bracket in appropriate length complete including taking down old light fitting, complete all as specified and as directed. |
| 138 | Supply & fix of MCB DB SPN 8 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting, complete all as specified and as directed. |
| 139 | S&F of factory made epoxy powder coated Distribution board (MCCB DB) TPN 4 way vertical type, IP - 43 Protection made out of min 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and suitable for TPN MCCB 125/160 Amps as incomer and 12 SP or 04 Nos TP MCBS as outgoing complete all as specified and confirming to IS : 8623, complete all as specified and as directed. |
| 140 | Supply and fix in repair MCCB 100 Amps, FP 415 volts 25 KA 50 HZ with thermal magnetic setting, complete all as specified and directed by Engineer in Charge. |
| 141 | Material, labour jointing & testingXLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 core including making connection with suitable size of cable gland, aluminium lugs etc complete including taking down old U/S cable, complete all as specified and as directed. |
| 142 | Supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and dierected |
| 143 | Supplying, laying sub class \"B\" bricks old size with axis of the bricks perpendicularto the axis of the cable as in cable protection complete all as specified and directed. |
| 144 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
