Tender For Special Repair To Ugbo And Addn/ Altn To Airmen Cafeteria/ Cook House At Af Stn Palam Under Ge (Af) Palam, Delhi Cantt - 10; 1 Dismantling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc (each layer) on roofs laid, bedded and pointed in any mortar complete all as specified and as directed. 2 Demolition of mud in roofs, any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed. 3 Takingdown of existing tarfeltand cement plaster of anydescription and thicknesson rooftopincluding flashing andjunctionof parapetandcleaning existingroof topsurfaceby brooming, wirebrushingincluding removing the debrisoutside MOD landcompleteall asspecified and as directed. 4 M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, and roof padding complete all as specified and as directed. 5 M&L for 15mm thick rendering on concrete surface of roof with cement motar (1:4)surface finishedevenand fairwithoutusingextracementby using liquid water proofing compound @200ml/ 50 kg bag of cement complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid seperately. 6 Supply only liquid water proofing compound (ISI marked) complete all as specified and as directed. 7 M&LforAPPbasedmodifiedpre fabricatedfivelayer 3 mm thick andweighingnotlessthan3.6 Kg/Sqmwater proofing membrane reinforcedwithpolyesternon wovenfabricmatwith150 gm/Sqm blackfinishedwith compatibleprimerconformingto IS 3488 @ 0.30 Ltr/ Sqm andbonding material85/25bitumen1.2 Kg/Sqmbeforeandafter layingmembranelaidbytorchapplicationsideoverlapof 75 mm andoverlapof 100 mm longtitudinally. At thejunctionof roof andparapet walla groove of 20mm x 20mmshall be madeattheheightof100 mmandmembrane shall be inserted andsealedwith bituminious mastic. Joints/overlap shallbe sealedwithhotbitumen85/25 all as specified and applying two coats of water proof aluminium paint including preparation ofnewly or previously untreated surfaces of any description, over 10cm width or girth, not otherwise described complete all as specified and as directed by Engineer-in-charge. 8 M&L forprovidingPCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping to parapet wall/kerbs in roof with projection of 50mm from the outer surface with a groove of 12 mm x 12mm as drip course in bottom side with and including necessary form work etc completeall as specified and as directed by Engineer- in- Charge. 9 M&L for factory made cement concrete tiles (25cmx25cm) x 22mm thick with grey cement and no pigments, machine pressed set, jointed and pointed in neat cement slurry as in roof/terrace, over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. 10 Takingdown rain water pipes (anysizeor pattern) including all fitting heads, shoes, bends, swan -necks etc complete as specified and as directed. 11 S&F PVC (SWR) bends of 110 mm bore complete all as specified and as directed. 12 S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable MS clamps after every one meter of interval duly painted with two coats of synthetic enamel paint over red oxide primer complete all as specified and as directed. 13 M&L for cutting of vegitation plant from roof, terrace, chajjas, walls etc, digging out roots and making good the surface in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) finishing surface even and smooth including painting with existing colour and necessary scaffolding up to required height complete all as specified and as directed by Engr-in-Charge. Note:- The cost of necessary GI nipple of any size, washout pipe, overflow pipe, anti mosquito cap, long threaded barrel nipple shall be deemed to be included in the unit quoted rate. 14 Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc capacity exc 500 ltrs & n.exc 1000 ltrs, complete all as specified and as directed. Note:- The cost of necessary GI nipple of any size, washout pipe, overflow pipe, anti mosquito cap, long threaded barrel nipple shall be deemed to be included in the unit quoted rate. 15 Description all as per ser item No. 14 here-in-before but capacity exc 250 ltrs & n. exc 500 ltrs, complete all as specified and as directed. 16 Taking up or down steel tubing, 15mm bore and connections in wall, ceiling, floor, etc including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge. 17 Taking up or down steel tubing, 20mm bore and connections in wall, ceiling, floor, etc including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge. 18 Refixing old steel tubing of 15mm bore pipe including all fittings and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed by Engineer-in-Charge. Note:- Old GI pipe shall be retrieved from Srl item No. 16.00 here-in- before. 19 M&L for GI tubing, 15mm bore `medium grade`with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed by Engineer-in-Charge. 20 Refixing old steel tubing of 20mm bore pipe including all fittings and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed by Engineer-in-Charge. Note:- Old GI pipe shall be retrieved from Srl item No. 17.00 here-in- before. 21 M&L for GI tubing, 20mm bore `medium grade`with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed by Engineer-in-Charge. 22 Demolition of brick work or stone/boulder built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc,but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. 23 M&L for brick work with sub class B bricks, straight or curved on plan, exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge. 24 M&L for gunniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than (95mm x 95mm) x 3mm tied to existing reinforcement with nails, adhesive plaster grade for concrete and providing gunniting pressure 2.0/2.5kg/sqm with admixture 1 part of cement and 3.5 part of sand with average thickness 40mm and making the surface even including 15mm thick plastering in CM (1:4) on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement including necessary use and waste of form work complete all as specified and as directed by Engr-in-Charge.Note:- Reinforcement required in the treatment shall be measured and paid seperately. 25 Taking down cement plaster on brick, stone or concrete surfaces of walls etc including raking out joints, hacking for keys, scrubbing down with water etc and removing the debris from site to outside MoD Land complete all as specified and as directed by Engr-in-Charge. 26 M&L for 10mm thick rendering of Ready Mix Mortar of approved make on brickworkorconcretesurfaces on internal walls,finished the surfaceevenandsmooth without using extra cement asonwall as whole or in patch etc complete all as specified and as directed by Engr-in-Charge. Make- Birla (HIL) or its equilent. 27 M&L for 15mm thick rendering of Ready Mix Mortar of approved make on brickworkorconcretesurfaces on external walls,finished the surfaceevenandsmooth without using extra cement asonwall as whole or in patch etc complete all as specified and as directed by Engr-in-Charge Make- Birla (HIL) or its equilent. 28 M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge 29 M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489-2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre /10sqm over new surfaces complete all as specified and as directed by Engr-in-Charge. 30 M&Lfor complete removalofexisting treated surface of exteriorwall by electrically operated grinder including necessary scaffolding etc and applyingtwocoatsofexterior emulsion paint over a coat of primer of same make to obtainsmooth finishing surfaceetc completeall as specified and as directedbyEngineer - in- charge. Note:- Work must be got executed through authorised Applicator of manufacturer and got approved from Engineer-in-Charge before commencement of work. 31 M&Lforpreparationof olddecorated plasteredor unplastered surfaces of walls bybroomingdownor steelwirebrushing, scrapingdown, smoke, sootsmoulds, moss efflorescent,salts & tradingoil, greasyspots and fillingcracks/holes by putty andapplyingonecoatofoilbounddistempercompleteacomplete all as specified and as directed by Engr-in-Charge. Note:- Work must be got executed through authorised Applicator of manufacturer and got approved by Engineer-in-Charge before commencement of work. 32 M&L for providing and applying cement based wall care putty on wall or ceiling of 2mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engineer - in- charge. 33 M&lfor preparation of old painted surfacesofwood& wood based surfaces ofanydescriptionnot otherwisedescribedover10 cmwidth&girthand applying onecoatof syntheticenamel paintcomplete all as specified and as directed by Engineer - in- charge. 34 Demolition and breaking up 150 mm internal dia drain pipes (slat glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed by Engineer - in- charge. 35 Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and as directed. 36 Description all as per ser item No. 35 above but exc 1.5 m deep and getting out in soft / loose soil complete all as specified and as directed. 37 M&L for providing PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed. 38 M&L for 100 mm thick concrete bed to drain pipes in cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed. 39 M&L for salt glazed stone ware drain pipes of internal dia 150mm laid in trenches and jointed complete all as specified and as directed. 40 Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed. 41 Removing excavated surplus soil/material to a distance exc. 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. 42 M&L for cutting openings, through brick walls in mud mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out effective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and as directed. 43 Dismantling wrought iron or mild steel work of any description not otherwise provided for door, gates etc complete all as specified and as directed. 44 S&F rolled mild steel grade Fe-290 Gde-E-165 as inframed work as in doors or gates of angle or other section gates of with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering complete all as specified and as directed. 45 M&L for cutting holes in brick walls, built in cement mortar or cement lime mortar, exc half brick but not exc one brick, for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 complete all as specified and as directed. 46 S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, including cutting holes, making good surface in PCC/Plaster complete all as specified and as directed. 47 S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apertupre 1.40mm and fixedwith tinned tacks or galvanised wire staples complete all as specified and as directed. 48 Demolition of reinforced concrete as in roofs, floors (other than ground floors), beams, staircases, landing, shelves, chajjas and similar suspended work includind removal of debris outside MoD land completeall asspecified and as directed. 49 M&L for providing reinforcement cement concretenominal mix (1:2:4) type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specifiedand as directed. 50 Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifiedand as directed. 51 Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specifiedand as directed. 52 M&L for TMT bar 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specifiedand as directed. 53 M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer of cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifiedand as directed. 54 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 55 S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed. 56 S&F Pre painted galvalume aluminium zink coating GI based plain steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall or in ridges, valley gutters fixed with self tapping screws complete all as specified and as directed. 57 Excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface in hard rock/PQC complete all as specified and as directed. 58 S&F mild steel rolled section as in main and cross beams, hip and jack rafter, purlins where connected to common rafters and running rails and guides, fixed with angle cleats or other connecting plates etc confirming to Fe-410W (Gde E-250) Quality-A grade complete all as specified and as directed. 59 M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 60 Dismantling wall and ceiling boards ( fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness, including cover fillets/grid complete all as specified and as directed. 61 Supply and fixing of 6mm thick fire retarding ceiling with calcium silicate board (600mmx600mm) fixed with staples on snap grid frame work of grid size (605mm x 605mm), with all hanging accessories, hangers 6mm dia, GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceilling cleats made out of GI flat (40x3)mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, cut out to made for lighting, fixture and AC grills etc complete all as specified and as directed. 62 Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises complete all as specified and as directed. 63 M&L for vitrified tiles 8-10 mm thick, 1st quilaty (Square/rectangular) polished, double charge shade, area of each tilesexceeding 0.36 Sqm but not exc. 0.42 Sqm, in floors etc. set and jointedwith neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. 64 Description all as per srl item No. 63 abovebut as in skirting complete all as specified and as directed. 65 M&L for ceramic coloured/ printed non-skid tiles 7 to 8 mm thick (square / rectangular) area of each tileexceeding 0.11 Sqm but n. exc. 0.18 Sqm laid as in floors set and jointed with neat cement slurry over and including 15mm thick screed bed or bedding layers of cement mortar (1:4) and pointed with coloured cement to match with colour of tiles complete all as specified and as directed. 66 M&L for glazed ceramic coloured tiles of size (450 x 350)mm x7mm thick / (350 x 250)mm x 7mm thick as in vertical surfaces as in skirting and dado, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles, with and including over 15mm thick rendering in cement mortar (1:4) complete all as specified and as directed . 67 Supply & fixing in repair vitreous china EWC Super constellation including cistern of size (83x37x66)cm S trap complete all as specified and as directed. Make:- Cat Part No 20040 (S-10/P-9) of make Hindware or equivalent of make Kohler. 68 Supply & fixing in repair vitreous china Urinal pot white with and including vitreous china partition, waste pipe, screw with wall fixing complete all as specified and as directed. Make:- Hindware Cat Part No 60010 or equivalent of make Kohler. 69 S&F in repairstwo way wall mixer with popup waste system, hot and cold facilites and 450 mm long braidaed hoses chromium plated complete all as specified and as directed. Make:- FUS-CHR-29273 UPR of Jaquar or equivalent of make Kohler. 70 S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directed. Make:- Jaquar Cat Part-No CHR- 563 or equivalent of make Kohler. 71 S&F in repair CP paper roll holder complete all as specified and directed. Make-AKP-CHR-35751P of Jaquar or equvalent in kohler. 72 S&F in repair wash hand basin, vitreous china, flat back (550x400)mm size, white including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, pair of brackets of mild steel (35 x 35 x 6)mm size with and including one mixer cast copper alloy CP 15mm bore, one brass CP stop valve 15mm bore and one PVC connection15mm size with PTMT nuts of length 450mm long complete all as specified and as directed by Engineer-in-Charge. 73 S&F in replacement of 100mm bore CI floor/nahani trap with grating including jointing and making good with cement concrete (1:2:4) type B-1 complete all as specified and as directed by Engineer-in-Charge. 74 S&F in repair, brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. 75 S & F in repair15mm bore anglecock, chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. 76 S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm and fixed complete all as specified and as directed by Engineer-in-Charge. 77 S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and as directed by Engineer-in-Charge. 78 S&F in repair CP soap dish holder complete all as specified and directed. Make:- AKP-CHR-35731P of Jaquar or equivalent in kohler. 79 S&F in repair bib taps with wall flange 15mm bore, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 80 S&F in repair pillar cock, foam flow chromium plated, fancy type, 15 mm dia,capstan heads, screwed down, high pressure complete all as specified and as directed. Make:- Cat No 8304T of Prayag or equivalent in Jaquar/Parko/Coronet. 81 S&F in repair 610 mm long PVC waste pipe flexible type 25mm dia suitable for couplings 32 mm / 40 mm dia complete all as specified and as directed by Engineer-in-Charge. 82 S&F in repair 5mm thick fancy typeor bevelled edge mirror of selected quality glass, mounted on 6mm thick ACbuilding board and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge. 83 S&Fin repairs15 mm two in one angle valve chromium plated with wall flangeand fancy typewithhigh pressure screwed down and with CP flange of same make complete all as specified and as directed. 84 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed by Engineer-in-Charge. 85 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50sqm but n. exc 4.0sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed by Engineer-in-Charge. 86 Taking down shutter of any description area n. exc 1 Sqm each complete all as specified and as directed. 87 Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed. 88 Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and re-fixing in the same opening after necessary repairing viz shifting of hinges/tower bolt /handle position etc complete all as specified and as directed. Note:- Cost of screws/nails and minor items shall be deemed to be included in the quoted rates. 89 S&F anodised aluminium powder coated frame (minmum thickness of powder coating 50micron) for doors, windows, ventilators, partition wall with one or more rebatesincluding joining cleat for fixing etc. complete all as specified and as directed. 90 S&F anodised aluminium powder coated door shutter of any colour (thickness of power coating not less than 50micron), aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specified and as directed by Engineer-in-Charge. 91 S&F anodised aluminium powder coated window and ventilator shutters of any colour (thickness of powder coating not less than 50micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.) hinges type B-21,100mm long (2 no.) suitable handle (1no.) ccomplete all as specified and as directed by Engineer-in-Charge. 92 S&F aluminium anodised with powder coating (minimum thickness of powder coating 50 micron) grillof design and parttern as approvedby GE including aluminium beading complete all as specified and as directed. 93 S&F 5.50mm thick tinted,sheet glass of selected qualityfixed to aluminium frame workcomplete all as specified and as directed. 94 M&Lfor 12mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & fixed with screws to timber/aluminium frame complete all as specified and as directed. 95 S&F door closer hydraulically regulated designation No 3 universal typesuitable for door shutter of 851 to 1000 mm in width of aluminum body (die cast) weight between 61 to 80 kg complete all as specified and as directed. 96 M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by Engineer-in-Charge. 97 S&F mild steel mortic lock vertical type size 100mm 4 levers complete all as specified and as directed. 98 S&F aluminium anodised barreltower bolts of extruded section, 150mm length of bolt and fixed with screws complete all as specified and as directed by Engineer-in-Charge. 99 S&F floor door stopper of aluminium alloy body and tongue (overall length of 140mm), anodised, with hard drawn steel spring, double legged with rubber shoe 75mm long fixed to door shutters complete all as specified and as directed. 100 S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size (915 x 460)mm bowl size (410 x 330 x 160)mm complete all as specified and as directed by Engineer-in-Charge. 101 Dismantling water tanks exc 500 ltrs & n exc 1000 ltrs capacity and removing to store complete all as specified and as directed by Engineer-in-Charge. 102 S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered, white, hoisted and fixed in position all as specified in SSR Part I, complete all as specified and as directed. 103 M&L for 5mm thick rendering of Ready Mix Mortar of approved make on concretesurfaces on ceiling, finished the surfaceevenandsmooth without using extra cement complete all as specified and as directed by Engr-in-Charge. Make- Birla (HIL) or its equilent. 104 M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge. 105 M&L for provding false ceiling of 12mm thick fine fissure board sharped finished mineral fiber acoustic false ceilingtiles with back of the duly sanded and finshed with a coat of protective paint and front duly finished false system of size (600mm x600mm) having noise reduction co-efficient of 0.55 light reflection of 80% thermal conductivity k=0.057 W/WWC and humidity resistance of 95% fixed to true look PVC die KL -24 suspension system (Hot dipped a glvanised steel section) of exposed T Section consisting of perimeter wall angle of size (24x24)mm of thickness 0.45 mm c/c universal main runner of T Shape with double rotary siticing of size (38x25) mm of length 1200mm made from 0.33mm GS steel of lenght 3.60 mtr to be spaced at 600mm x 600mm size) c/c cro runner T shape wtih double rotary siticing of size (30x24)mm of length 1200mm made 0.25mm thick GS sheet spaced @ 600mm c/c (600mm x 600mm) size complete all as specified and as directed by Engineer -in- Charge. 106 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thick above or below ground level including removal of debris outside MOD land complete all as specified and as directed. 107 M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in floor etc complete all as specified and as directed. 108 M&L for chequered cement concrete tiles of size (200 x 200)mm x 25mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles, with and including over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed . 109 M&L fot cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good cutting not exc 10 cm girth as in wall complete all as specified and as directed. 110 Taking out unserviceable/damagedGI/Al strips in any description from roof wall etc in any height complete all asspecified and as directed by Engr-in-Charge 111 Taking out unserviceable/damagedair termination aluminium rod alongwith GI pipe any shape or sizefrom roof or wall etc in any height complete all asspecified and as directed by Engr-in-Charge. 112 Supply & fixing of EUROSTAR Early Streamer Emission (ESE) lightning protection system, NFC 17- 102:2011 compliant tested in ICMET high voltage labarotary. Protection radius 38 mtrs at level -I & II ESE Air Terminal of external wide area protection system based on proactive Early Steamer Emission (ESE) Technology, ESE terminal having capturing rod dia of 38mm complete all as specified and as directed.Made in Bulgaria ( EUROPE ) Manufactured By EUROSTAR (MODEL ES30 ) / JEF Techno or as approved by the GE. 113 Supply & fixing GI Mast of 4.5 mtr length , 32mm dia pipe B Class, zinc coated with attachmentcollar, base plate , etc including with fasteners and PCC work complete all as specified and as directed. 114 Supply & fixing Down Conductor Single core 70 sqmm PVC insulated flexible cable as per IndianStadards complete all as specified and as directed. 115 Supply & fixing Tirumala advance earthing electrode (Maintenance free) CPRI tested UL listed 17.2mm x 3 mtr length copper bonded 250 microns solid rod & advanced earthing compound 25 Kgs x 2 Bags & square Polymer earthpit chamber complete all as specified and as directed. 116 Supply & fixing Electro Mechanical counter Eurostar LCD Lightning Strike Counter complete all as specified and directed. Make in Bulgaria (EUROPE) 117 Supply and fixing Test link box of suitable size and dimension in Poly Carbonate Explosure complete all as specified and directed. 118 Installation, testing & commissioning charges for (Lightning Terminal, Mast & Test Link & Digging, Installation & Connection to Earthpit ) complete all as specified and directed. 119 Taking down carefully unserviceable copper/aluminium point wiring(light, fan, socket or power) complete including fixture and fittings any type complete all as specified and as directed. 120 Taking down unserviceable sub main wiring with conduits/battens etc complete all as specified and as directed. 121 Material and labour for point wiring with single corePVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm FRLS (Nominal area) drawn through and including non metallic rigid PVC casing and caping wiring on ceiling and roof duly ISI marked including Tee, GI screw, junction boxes and provision of3 mm thick plastic laminated sheet cover of suitable size on existing terminal boxes with new brass screwsfor mounting switches, sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with strandedcopper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch. 122 Description all as per srl item No. 121.00 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and as directed by Engr-in-Charge. 123 Description all as per srl item No 121.00 here-in-before but for 3 pin 5 Amps socket out let on independent board controlled by one switch complete all as specified and directed by Engr-in-Charge. 124 Description all as per srl item No 121.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mmstranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified and as directed. 125 M&L for wiring with and includingmulti stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing throughexisting medium grade rigid non metallic PVC concealed conduit of any size bore and including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number ascontinuity earth wire terminating in new modular sunken concealed terminal boxescomplete all as specified and directed for the following:-(a) One light /Fan point controlled by one switch 126 Description all as per srl item No 125.00 here-in-before but for one 3 pin, 5 Amps, socket outlet on the same board, controlled by another switch complete all as specified and as directed. 127 Description all as per srl item No 125.00 here-in-before but for one multi pin socket outlet, 5 Amps, on Independent board complete all as specified and as directed. 128 Description all as per srl item No 125.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified and as directed. 129 S&F modular switch 1 way 10 Amp, 1 module complete all as specified and as directed. 130 S&F modular switch 1 way 20 Amp, 1 module complete all as specified and as directed. 131 S&F modular socket 6/16 Amp, 6 pin combined, 2 module complete all as specified and as directed. 132 S&F modular socket 20 Amp, 2/3 pin combined, 2 module complete all as specified and as directed. 133 S&F modular fan stepped type regulator, 100W/120W, 1 module complete all as specified and as directed. 134 Supply and fixing for ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed. 135 S&F LED recessed mounting square slimLED down lighter 36 Watt for AS/GB/POP ceiling2x2 size complete with driver internally prewired and connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. 136 S&F indoor decorative LED Battens - integrated type 20 watt 4 feet white 6500K fixture complete with all accessories internally pre wired and including connecting up with twin corecopper conductor cable completeall as specified and as directed by Engr-in-Charge. 137 Supply and fixing sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way, double door 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. 138 Supply and fixing for Vertical type load line distribution board, double door, 4 way, AC, 3 Phase, 415 volts, TPN, bus bar 200 Amps rating and earth bus & din rail suitable for MCCB as incomer complete all as specified and as directed by Engr-in-Charge. 139 Supply and fixing MCCB, 4 Pole 125 Amp, 16 kA complete all as specified and as directed by Engr-in-Charge. 140 Supply and fixing MCB, 4 pole, 63 Amp,10 kA complete all as specified and as directed by Engr-in-Charge. 141 Supply and fixing MCB, SPN, 63 Amp, 10 kA complete all as specified and as directed by Engr-in-Charge. 142 Supply and fixing MCB, SPN, 40 Amp,10 kA complete all as specified and as directed by Engr-in-Charge. 143 Supply and fixing MCB, SP, 6-32 Amp,10 kA complete all as specified and as directed by Engr-in-Charge. 144 Material and labour for submain wiring with two single core4.0 sq mmPVC insulated FRLS multistrand copper conductor cable drawing into and including rigid non metallic PVC conduit, medium gradeISI marked with all conduit fittings & fixing accessories and one single core 4.0 Sqmm FRLSmultistranded copper conductor cable as continuous earth wire complete all as specified and as directed by Engr-In-Charge. 145 Material and labour for submain wiring with two single core6.0 sq mmPVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium gradeISI marked with all conduit fittings & fixing accessories and one single core 6.0 Sqmm FRLSmultistranded copper conductor cable as continuous earth wire complete all as specified and as directed by Engr-in-Charge. 146 Material and labour for submain wiring with two single core10 sq mmPVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium gradeISI markedwith all conduit fittings & fixing accessories and one single core 10 Sqmm FRLS multistranded copper conductor cable as continuous earth wire complete all as specified and as directed by Engr-In-Charge. 147 Material and labour for submain wiring with four single core10 sq mmPVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium gradeISI markedwith all conduit fittings & fixing accessories and one single core 10 Sqmm FRLS multistranded copper conductor cable as continuous earth wire complete all as specified and as directed by Engr-In-Charge. 148 Supply and fixingsheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed by Engr-In-Charge. 149 Supply and fixing sheet metal enclosure for distribution board TPN (when MCBs to be used ) 4 way, 415 Volt, double door 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. 150 Supply and fixing sheet metal enclosure for distribution board TPN (when MCBs to be used ) 8 way, 415 Volt, double door 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. 151 Supply and fixing MCB, TPN, 40 Amp,10 kA, 415 Volt complete all as specified and as directed by Engr-in-Charge. 152 Supply and fixing in replacement of high speed wall mounting fan, AC single Phase, 230 V of size 400mm sweep complete all as specified and as directed by Engineer-in-Charge. 153 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV,connection piece etc. complete all as specified and directed. 154 Material & labour Bib taps, cast copper alloy with crutch or butter fly handle, screwed down, high pressure for iron pipe / fittings or for brass ferrule, of size 15 mm dia bore complete all as specified. 155 S&F stop cock, cast copper alloy, fancy type, long shank and cup, chromium plated, hot or cold marked, with crutch or butter fly handle, screwed down, high pressure for iron pipe / fittings or for brass ferrule, of size 15 mm dia bore complete all as specified and as directed. 156 Supply and fixing exhaust fan, steel body heavy duty with louvers complete of sweep size 450mm, 900 RPM, copper winding single phase motor, with bolts, nuts and washers, size of the bolt 15cm long 12mm dia embeded in the wall including provision of PVC flexible copper cable of size 23/0.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection alongwith mosquito jali on wall complete all as specified and as directed. 157 Taking down fans of any sweep and any size including cable connectionsand disconnecting of fan bladesand removing the fan with blades and deposit in MES store yard complete all as specified and as directed. 158 Supply and laying in replacementofXLPELT 1100 Volt Grade, armoured underground cable of size 16 Sqmm 4 core with stranded aluminium conductorin trenches /passing through pipes/ on poles etc complele all as specified and as directed. Note:- Excavation, earthwork and cable protection shall be deemed to be included in unit rate. 159 M&L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and as directed. Note:- Depth after punning shall be measured and paid. 160 Supply and laying sub class B old size, kiln burnt bricks, laid as cable protection coverincluding taking down old unserviceable bricks complete all as specified and as directed. 161 S&F in repair, GI pipe 50mm bore, light grade, laid below road / fixed along thepoles / walls with necessary clamping, etc complete all as per specified and as directed. 162 M& L for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6.30 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work,PCC pit with RCC cover, charcoal, salt, funnel, GI wire up to 7.5 mtrs length complete all as specified and as directed.
