|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 2 | S&F of Non - skid Ceramic tiles 7 to 8 mm thick size of each tiles is 600 x 600 in floors etc. set and jointed in neat cement slurryover 15 mm thick screed bedding in CM 1:6 and . and pointed in white or coloured cement to match, complete all as specified and directed. |
| 3 | All as per item No 02 above but on vertical surfaces over 10 mm thick rendring in CM 1:4, complete all as specified and directed. |
| 4 | S &F of coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurryover 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match, complete all as specified and directed. |
| 5 | S&F of coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4, complete all as specified and directed. |
| 6 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 7 | M&L of25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor /roof surface and leveling course, complete all as specified and directed. |
| 8 | M&L of PCC 75mm thick 1:4:8 of type D2 using 40mm graded stone aggregate as in sub base and similar, complete all as specified and directed. |
| 9 | M & L for sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed. |
| 10 | S & F of machine pressed rubber moulded coloured precast conctete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, all as specified and directed. |
| 11 | M&L for PCC 1:3:6 type C-2, (using 40mmgraded stone aggregate) as in plinth protection laid in alternate panels75mm thick finished even and smooth w/o using extra cement, complete all as specified and directed. |
| 12 | Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade \"A\", complete all as specified and directed. |
| 13 | M&L for Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, and setting in cement mortar 1:6, complete all as specified and directed. |
| 14 | M&L of PCC 1:2:4 type B1 (20mm graded aggregates) as coping, bed block, Haunching/ benching of drains/coving/ sides ofany type of tiles etc and similar work, complete all as specified and directed. |
| 15 | M & Lfor PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain, complete all as specified and directed. |
| 16 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds, mitred stopped ends etc., complete all as specified and directed. |
| 17 | M & L for 15 mm thick cement plasteron fair faces of brick work or concrete surface on wall in CM 1:4finished fair and even, complete all as specified and directed. |
| 18 | M & L for 15mm thick cement plasteron fair faces of brick work or concrete surface on wall in CM 1:6finished fair and even, complete all as specified and directed. |
| 19 | Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc compplete all as specified and directed. |
| 20 | Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves, lintels, etc and cutting chases for concealed water tubing and making good , cutting n\"exc 10 cm girth,complete all as specified and directed. |
| 21 | S&F of 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floorincluding taking down, complete all as specified and directed. |
| 22 | S&F of 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floorincluding taking down, complete all as specified and directed. |
| 23 | S&F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 24 | S&F in repair CP brasswall mixer (with L bend for supply to showerr) for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 25 | S&F in repair CP Brass central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 26 | S&F in repair 15mm bore fancy type, CP Brass Bib tapswith capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 27 | S&F in repair 125 mm CP brass shower rose for fixing with 15mm pipe, complete all as specified and directed. |
| 28 | S&F in repair 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 29 | All as per item No 28 above but 20 mm bore, complete all as specified and directed. |
| 30 | M&L in repairs Granite (of any type) work (table rubbed and polished) 16-18 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of CM (1:6), complte all as specified and as directed. |
| 31 | S & F in repairs vitreous china hand wash basin ( OVAL IN SHAPE) white exclusive quality, size 520 X 450 X 200 MM incl PVC waste pipe and waste coupling cutting for and pinning in ends of brackets or erecting stand fixed, complete all as specified and directed. |
| 32 | S&F in repairs 600mm long PVC Connection 15mm size with PTMT nuts,complete all as specified and directed. |
| 33 | S&F in repairs Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges, complete all as specified and directed. |
| 34 | S&F in repairs viterous China wash down water closet (pedestal pattern) complete, incl toilet paper holder, Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,health faucet jet (excluding flushing cistern and flushing pipe), complete all as specified and directed. |
| 35 | S&F in repairs 10 litre capacityPVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle, complete all as specified and directed. |
| 36 | S&F in repairs 1000 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) incl connections, complete all as specified and directed. |
| 37 | Taking down chowkats or frames exc. 1.5 but n.exc 4 Sqm each with shutters (Without taking off shutters from the frame) and removal to store, complete all as specified and directed. |
| 38 | All as per item No 37 above but n.exc 1.5 Sqm each, complete all as specified and directed. |
| 39 | S&F in pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc., complete as specifiedand as directed. |
| 40 | S&F in 30 mm thickness Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 41 | S & F in 35mm thick second class hard wood glazed and skeleton door shutters (three panels), open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framming plain, chamfered or rounded fitted with cut and mitred beads or securing glass etc, size of members of shutters all as per clause No 8.20 (a) of SSR Part-I (2009), complete all as specified and directed. |
| 42 | M&L in providing factory made PVC internal door frame (PRELAM ) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm) made out of extruded 5 mm (+-).25 mm) thick PVC sheet manufactured by an ISO 9001-2008certified company and by joining 3 nos of heat bend PVC sheet section The inside section of size 90 x 30 mm shall be made from plain colour PVC sheet of 5 mm (+- o.25 mm) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25 mm) thick plain PVC sheet The frame shall be mitered cut at two corners and joined with 4 nos of 150 mm longbrackets of 15 mm x 15 mm MS square tube The two vertical door frame are tobe reinforced with 40 mm x 20mm MS square tube of 19 guage through out the frame the door shall be fixed to the wall using anchor fastners A minimum of 4 nos of screw to be provided for each vertical members and min 2 nos for horizontal members etc complete as per manufacturers specification and direction of Engineers-in-Charge. |
| 43 | M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of MS tube of 19 guage thickness and size 20 mm x 40 mm for stiles as well as top bottom and lock rail MS frame shall have a coat of primer of approved make and manufacturer The inside Panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm thick wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm ) thick plain / prelam PVC sheet manufactured by an ISO 9001-2008 certified company on both side of the inside panel ALl the four edged lipping to pe painted with PVC ink of matching colour of PLAIN/PRELAM moulded PVC sheet of door 0.20 mm thick (5 mm x 4 mm ) thick PVC sheet to be given for lock provision at lock height door to be fixed with frame with 3 nos SS butt hinges of size 100 mm x 25 mm x 25 mm and 50 mm long steel screw drilled suitable for to pass through both the wall of th MS tube other hardwares could be fixed with 25 mm x 8 mm size steel screw etc complete as per direction of Engineer- in- Cahrge manufacturer specification and drawings. |
| 44 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners,Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor including cost of glass and wiremash and includes all other connected accessories Net opening will be measured or payment purpose.)(A) Area not exceeding 2.00 sqm each. |
| 45 | S&F in repairs 18/19 mm thickPrelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as directed and specified. |
| 46 | S&F in 200mm aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 47 | S&F in 125 mm aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 48 | S& F in 125 mm extruded aluminum alloy handles, fabricated type anodised, complete all as specified and directed. |
| 49 | S&F in 300mm long ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 50 | S&F in 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 51 | S&F in Extruded aluminium alloy handles, fabricated type, anodised size-150mm, complete all as specified and directed. |
| 52 | S & F in M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings all as directed. |
| 53 | S & F in steel ventilators with tophung shutters incl.hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded, complete all as specified and directed. |
| 54 | S&F in Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and directed. |
| 55 | S&Fin 25 mm dia fancy type SSCurtain rod fixed with SS bracket and lattooto wall complete as sample approved all as specified and directed by Engr- in - Charge. |
| 56 | S&F in 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. complete all as specified and directed. |
| 57 | S & F in 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane, complete all as specified and directed. |
| 58 | All as per item No 57 above but 3mm thick sheet glass ground or Obscured or frosted on one side, complete all as specified and directed. |
| 59 | M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces, complete all as specified and directed. |
| 60 | M & L for Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 61 | Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store, complete all as specified and directed. |
| 62 | S&F in 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors,complete all as specified and directed. |
| 63 | S&F in 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors,complete all as specified and directed. |
| 64 | S&F in 75 mm bore PVC (SWR) pipessingle socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps, complete all as directed. |
| 65 | S&F in 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 66 | S&F in 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 67 | S&F in 110 mm bore PVC (SWR) junction single (Single T) equal or unequal, complete all as specified and directed. |
| 68 | S&F in 75 mm bore PVC (SWR) junction single (Single T) equal or unequal, complete all as specified and directed. |
| 69 | S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 70 | S & F in repairs 1000mm x 600mm bevelled edge mirror of selected quality glass without any frame, mounted on four brackets including all necessary fittings,complete all as specified and directed. |
| 71 | S&F in double legged door stopper of aluminium alloy with rubber, all as specified and directed by Engr-in-Charge. |
| 72 | M&L for applyingtwo coat exterior emulsion paint (weather coatof Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer, complete all as specified and directed.Make/ applicator : Royale Luxary emulsion shyne distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper. |
| 73 | M&L for applyingtwo coat Oil Bound Distemper on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer, complete all as specified and directed.Make/ applicator : Royale Luxary emulsion shyne distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper. |
| 74 | M&L for complete removal of existing treatment using mechincal device and applying oftwo coat Oil Bound Distemper on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer, complete all as specified and directed.Make/ applicator : Royale Luxary emulsion shyne distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper. |
| 75 | M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as inmanhole cover, shelves, chajjas etc andset in CM 1:6, complete all as specified and directed. |
| 76 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 77 | M&L for RCC type B1 (1:2:4), 20 mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 78 | Supply and Application of 5 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leakingconcrete roof surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followedby one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min.50% solids, filling and sealing the cracks, then over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coathaving +450% Elongation. The surface is then to be tested for water tightness with ponding test for min. 2 days and then top coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, antibacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 100 - 120microns using brush, roller, airless spray gun as applicable. The application is to be done by company approved applicator only |
| 79 | M&L for Kota stone slab for stair caseflooring 20-25mm thick and including 15mm thick cement screed bed in CM 1:6 laidand jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshedpolishing in complete all as specified. |
| 80 | M&L for kota stone slab 20-25 mm thick in riser and tred single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing, complete all as specified and directed. |
| 81 | M&L for applyingtwo coat exterior emulsion paint (weather coatof Berger or equivelent ) on oldplastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.Make/ applicator : Royale Luxary emulsion shyne distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper. |
| 82 | S&F in repairs Steel rolling shutters 1.25 mm thick , with out ball bearing, as specifiedincluding top cover,anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete,but gear operated type with chain wheel and hand chain all as specified and directed by Engr-in-Charge. |
| 83 | S &F in coloured exterior grade tiles 8-10mm thickness area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurryover 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match, complete all as specified and directed. |
| 84 | M&L for Udaipur Green(of any type) work (table rubbed and polished) 12-14 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of udaipur green over 15 mm thick screed bed of CM (1:6), complte all as specified and as directed. |
| 85 | S & F in 5mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane, complete all as specified and directed. |
| 86 | M & L non skid Heavy duty Outdoor tile 400x400x12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over and including 15mm thick screed in CM 1:4, complete all as specified and directed. |
| 87 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window - cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Conplete all as specified and directed. |
| 88 | S&F 3 mm thick (ACP) aluminium composite panel letter size 200mm x 25x25mm with inside LED lights (Vita 25 mm aluminium foil with PVDF coating ) in English and Hindi and filling the gap with silicon, sealant and other materials of approved quality etc., complete in all respect as specified and directed. |
| 89 | S&F 3mm thick aluminium composite panel cladding using aluminium composite panel sheet 3mm thick (Vita 25mm aluminium foil with PVDF coating) works) and filling the gap with silicon, sealant and other materials of approved quality etc., complete in all respect incl ms frame workas specified and directed. |
| 90 | Demolition of brick or stone masonry, built in cement mortar incl all quoins, pillars, arches etc but excluding ashlar facing, complete all as specified and directed. |
| 91 | M & L for preperation of new plastered surfaces wall applying two coats of cement base paint over one coat of primer, complete all as specified and directed. |
| 92 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified as directed. |
| 93 | M&L forPCC 1:4:8 type D-2 (40mm graded aggregate) Cement concrete in foundations filling and mass concrete etc, complete all as specified as directed. |
| 94 | M&L for Pre- painted galvalume aluminum zinc coating GI basedcorrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all specifiedas directed. |
| 95 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Confirming to Fe-410- W(GdeE-250) quality-B etc., complete all as specified and directed. |
| 96 | M&L for 75mm thick PCC (1:3:6) type C-2 using 20mm stone agg as in sub base/ flooring, complete all as specified and directed. |
| 97 | Taking down carefully aluminium battenpoint, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i)Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii)Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii)Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. |
| 98 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI markedand including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:- |
| 99 | (a)One light/fan/bellpoint controlled by one switch single pole one way |
| 100 | (b) All as per item No 98.01here-in-before butone3 pin 6 amp switch socket out let independent . |
| 101 | (c) All as per item No 98.01 here inbefore but one 3 pin 6 amps socket outlet on the same board with other switch complete. |
| 102 | All as per item No 98.02here-in-before but using 02 Nos. 2.5 sq mm size for main cable and 01 No.2.5 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board. |
| 103 | Supply and fix switch modular flush 6A single pole one way ISI marked,complete all as specified and directed. |
| 104 | Supply and fix modular sockets 6 Amp 2 in 1 2/3 pin combined complete all as specified and directed. |
| 105 | Supply and fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked, complete all as specified and directed. |
| 106 | Supply and fix modular sockets 16Amp 2 in 1 3/5pin combined, complete all as specified and directed. |
| 107 | Supply and fix ceiling rose surface bakelite 60x25mm three terminal, complete all as specified and directed. |
| 108 | Supply and fix electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type, complete all as specified and directed. |
| 109 | Supply & fix MCB DB SPN 12 way double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting, completeall as specified and directed. |
| 110 | Supply and fix MCB, single pole and neutral, 230 volts, 40 to 63 Amp rating, \"C\" series fixed in DBs catered here-in-before. |
| 111 | Supply and fix MCB SP 6-32 Amps 240 volts 10 KA 50 HZ \"C\" curve, complete all as specified and directed by Engineer in charge |
| 112 | Supply and fix wall mounted fan 400mm, 230 volts, 50 Hz 1420 RPM with 90 degree oscillation and having speed control by twopull cord system, all as specified and directed. |
| 113 | Supply and fix water heater storage vertical type, puff insulation type of 25 ltrs capacity and 1500 watts, BEE Star rated-5, with glass line inner shell with Hot & Cold pipe, water connection pipe, electric connection and necessary fixing arrangement andincluding writing MES No., complete all as specified and directed. |
| 114 | Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLSH, 1100 Volts gradecable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLSH 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of4 sqmm cable and one run of 4 Sqmm cable as earth leadwith conduit shall be measured as one unit length for payment.(b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish. |
| 115 | S & F in sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two Pin and earth plug and socket, complete with one single pole MCB, 240 V, 20 Amp. |
| 116 | Supply and fixingin repair Ventilating Fan250mm sweep,non metallic resin body,single phase 240 volts AC 50 Hz including louvers,and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard. |
| 117 | Cutting the existing wall/removing existing steel bar to make a hole for fixing of ventilation fan through packing of wooden ply to support the ventilating/ air circulating fan including necessary nut and bolts of suitable size incl making good of disturbed surface complete all as directed by Engr-in charge. |
| 118 | Supply and fixingLED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 119 | Supply and fixing LED Light fitting mirror type with high out put diffuser 2 feet ,10watt ,220 v AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 120 | Supply & fix MCB DB SPN 8 way double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting, completeall as specified and directed. |
| 121 | Supply & Fixing in ceiling fan 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 % ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and as directed. |
| 122 | S&F in factory made epoxy powder coated Distribution board (MCCB DB) TPN 4 way vertical type, IP - 43 Protection made out of min 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and suitable for TPN MCCB 125/160 Amps as incomer and 12 SP or 04 Nos TP MCBS as outgoing complete all as specified and confirming to IS : 8623, complete all as specified and directed. |
| 123 | Supply and fix in repair MCCB 100 Amps, FP 415 volts 25 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge. |
| 124 | Material, labour jointing & testingXLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 core including making connection with suitable size of cable gland, aluminium lugs etc complete including taking down old U/S cable, all as specified and directed. |
| 125 | Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLSH, 1100 Volts gradecable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLSH 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of6 sqmm cable and one run of 6 Sqmm cable as earth leadwith conduit shall be measured as one unit length for payment.(b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish. |
| 126 | M&L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate opt less attn. 1.50 m below ground levelsurrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, check nuts of GIand protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wire mesh, earthing test pointetc complete including necessary earth work and excavation in any type of soil , PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100mm C/C both ways, with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as describedin electric plate of SI Part I completeall as specified and directed and testing on completion. Note :- Ifthe desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. |
| 127 | Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes, complete all as specified and directed. |
| 128 | Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 mm thick, complete all as specified and directed. |
| 129 | Removal of excavated material to a distance not exc 50 Meter and depositing wheredirected at a level not exc 1.5 M above the starting point complete all as specified and directed. |
| 130 | Supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning, complete all as specified and dierected |
| 131 | Supplying, laying sub class \"B\" bricks old size with axis of the bricks perpendicularto the axis of the cable as in cable protection complete all as specified and directed. |
| 132 | Supply & Fixingin replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia, complete all as specified and directed. |
| 133 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
