Tender For Special Repair To Ors Block At Zorawar Enclave And 02 X Bathroom Portion Of Building No P-06 Under Age B/R-I Of Ge (N) Mamun.; 1 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed. 2 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. 3 Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. 4 S&F pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats and two coats of synthentic enamel paint complete all as specified and directed. 5 S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats and two coats of synthentic enamel paint complete all as specified and directed. 6 S&F 35mm thick factory made plain framed panelled shutters of2nd class hard wood, two panels with lock rail and panel of 9mm thick BWP commercial ply.The size of rail and stile as per IS-1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed. 7 S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per section 8 clause 8.20 (a) of SSR Part-Icomplete all as specified and directed 8 M & L preparation of new wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint over a coat of pink primer complete all as specified & directed. 9 S&Ffor 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white and with weight of sheet not less than 9kg per sqmas in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed. 10 Repair to old steel window not exc 1 sqm including replacement of unserviceable/ damagedhinges, all handles, necessarywelding to shutters and chowkhat for making window in serviceable condition, all members grinding to smooth surface and applying redoxide primer to grinded surface, complete all as specified and directed. 11 M&L Soild PVC door frame of size 50mm x 95mm (suitable for moulded door) made out of 5mm wood grain colour PVC sheets & edges will be painted to match printed sheet as reinforced with 19 mm square MS tube and fixing in opening as specifiecation & drawing complete all as specified and as directed. 12 S&F Solid PVC door frame of size 50 x 47 mm made out of 5mm wood grain printedPVC sheet used instead plain colour PVC sheet & edges shall be painted to matchwith printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. 13 S&F Factory Made Solid PVC Moulded door Shutter With wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. 14 S&F Box type Steel windows and ventilators comprised of tubular frameand shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg staydovetailedor welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. 15 M&L for preparation old steel or iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paintcomplete all as specified and as directed. 16 S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed. 17 S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed. 18 S&F 3 mm thick pinhead glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed. 19 S&F stainless steel butt hinges 100 mm,medium weight,complete all as specified & directed. 20 S&F 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed. 21 S&F aluminiumanodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed. 22 S&F 150 mm size aluminium alloy handles, febricated type extruded section(as per sample), complete all as specified and directed. 23 S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 24 S&F 100mm hasp and staples, safety type (as per sample), of alumium anodised complete all as specified and directed. 25 S&F in repair25mm bore mild steel powder coated, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed. 26 Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc and removal of debris/rubbish off the premises etc complete all as specified and directed. 27 M&L for Brick work with, sub classB bricksstraight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & directed. 28 Brick work with old servicable bricks retrieved from dismantling, straight or curved on plan exc 6 mtr mean radius built in CM 1:4complete all as specified and directed. 29 M&L Brick work with old servicable bricks retrieved from dismantling, straight or curved on plan to any radius in half thick walls,built in CM 1:4complete all as specified and directed. 30 M&L Brick work with fly ash bricks straight or curved on plan to any radius in half thick walls,built in CM 1:4complete all as specified and directed. 31 Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed. 32 M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed. 33 M&L for Rendering 5mm thick cement plaster on fair faces of brick work, concrete sruface in cement mortar (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and directed. 34 M&L for 15mm thick plaster in two layers (10+5mm) in cemet mortar 1:4 external layer of plaster shall be mixed with liquid water proofing compound as per manufacturers instructions on brick work or concrete surfaces or in chajjas/parapet walls etc, surface finished even and smooth with using extra cement complete all as specified and as directed.Note: WPC shall be measured and paid for separately. 35 M&L for rendering or plastering 15 mm thick cemet plster on fair faces of brick work or concrte surfacesin CM 1:4 in two layers(5mm finishing layer over 10mm base layer) finished even and surface without using extra cemen with WPC over finishing layercomplete all as specified and directed.Note: WPC shall be measured and paid seperately) 36 M&L for rendering or plastering 10 mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas,roof projections, drainge etc, making the edges in line, in true shape and finishing the surface without using extra cement complete all as specified and directed. 37 M&L for cleaning, breaking, loose concrete, changingofcorressive reinforcement with new reinforcement (if required) and filling plain cement concrete 1:1 1/2 :3 type B0 using 12.5mm graded aggregate using approved bonding chamical(from Fosroc/STP/Sikka/ Dr. Fixit) at places like chajja, sunchades, roof projection, fascia, etc beams, columns etc including necessary scafolding, formwork (upto G+2 floor) etccomplete all as specified and directed. Note :- The cost of scafoldings, formwork, reinforcement etc shall deemed to be included in the quoted rate of item. Reinforcement shall be measured and paid for seperately. 38 M&L for preparation of new plastered surface of external wall and chajjas,making surface smooth using sand paper, priming the surface with alkali resistance primer paintfor external surface, applying two coats of cement base paint including curing complete all as specified & directed. 39 M&L for preparation of old wall surface, making surface clean, dry, free from any loose paint film, dirt, chalk, grease, fungus and algae etc and applying one coat of antifungal acrylic emulsion exterior weather proof paint complete all as specified and directed. 40 M&L two coats of distemper oil enulsion over primer coat after application of average 2mm thick wall care putty including prepartion of new plastered wall surface complete all as specified & as directed. 41 M&L for three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and as directed. 42 M&L for three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed. 43 M&L two coats of distemper oil enulsion overprimer coat after application of average 2mm thick wall care putty including prepartion of oldwall surface complete all as specified & as directed. 44 M&L two caot of white wash on surface of wall including preparation of old plastered surface of wallscomplete all as specified & directed 45 M&L two caot of white wash on surface of wall including preparation of old plastered surface of ceiling complete all as specified & directed 46 M&L for complete removal of old existing treatment including preparation of plaster/unplaster surfaces ofwalls, chajja, fascia etc and applying two coat of exteior emulsion paint (weather coat) over a coa of primer any shade or colour complete all as specified and directed. 47 M&L for preparation of old plastered surface of external wall and chajjas,making surface smooth using sand paper, priming the surface with alkali resistance primer paintfor external surface, applying two coats of cement base paint including curing complete all as specified & directed. 48 Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed. 49 M&L for cement concrete type C-1, 1:3:6 (using 20mm graded crushedstone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. 50 Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing),rubish off the premises complete all as specified and directed. 51 M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqmin skirting/dado or verticle surface etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 10mm thick screed bed or bedding layer of mortar in CM 1:4 inculidng taking down plaster, rubish off the premisescomplete all as specified and directed. 52 M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqm as in floor v etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 15mm thick screed bed or bedding layer of mortar in CM 1:4complete all as specified and directed. 53 M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqmin floor, skirting/dado or verticle surface etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 15mm thick screed bed or bedding layer of mortar in CM 1:4complete all as specified and directed. 54 M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed . 55 M&L for green/black marble (Bhaislana Zerba) work 15-16 mm thick (table rubbed and polished) in cooking plateform,window cill, steps, stair case trade & riser etc in cement mortar (1:4), pointed in white cement (1:2) using marble dust with admixture of pigment to match with marble shade ofincluding demolition of old stones/tiles and rubbish off the premises complete all as specified and directed. 56 M&L green Marble work 12-15mm thick (table rubbed and polished) in cooking plateform,window cill, steps, stair case trade & riser etc in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra complete all as specified & directed. 57 M&L for Round chamfering to the edgesof marble/granite slabs not exc 15 mm wide complete all as specified and directed. 58 Taking up or down steel water tubing and connections including cleaning for refixing of pipe 20mm bore dia all as specified and directed. 59 All as per item No 58 here above but 15 mm bore 60 S&F15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. 61 Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed. 62 M&L for cutting chases, pinning in brick work,making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed. 63 S&F20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. 64 Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed. 65 S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed. 66 S&Fkitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers , PVC waste pipefixed in repair including waste copling; bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495x420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 67 S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm of approved make with mild steel screw complete all as specified and directed. 68 S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch lever handle screwed both ends for iron pipe 15mm bore dia fixed in repair, complete all as specified and directed. 69 S&F in repair15mm bore dia Bib taps long body, cast copper alloy, chromium plated fancy typeISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed. 70 S&F in repairVitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting standincluding 32 mm diawaste pipe complete all as specified and directed. 71 S&F in repair 15mm bore pillar tap capstan head cast copper alloy, chromium plated, screwed down high pressure with or without letters HOT or COLD with long screwed shank and fly nuts screwed for iron pipe, ISI marked complete all as specified & directed. 72 S&F in repair towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm thick complete all as specified and directed. 73 S & F brass CP Shower rose with or without swivel joints,(any size) including fixing to steel pipe or union complete all as specified & directed. 74 S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed. 75 S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. 76 S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern(including fixingofflush pipe) including provision of cement concrete bedding, in repair complete all as specified & directed. 77 Chromium plated peg stay 6 hook as per sample approved by Engr-in-charge, complete all as specified and directed. 78 S&F in repair Vitreous china bowl urinal half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe including providing and fixing of PTMT urinal spreader with 15mm dia pipe, complete all as specified and directed. 79 PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete (sunken floors etc) complete all as specified. 80 Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately. 81 S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC,complete all as specified and directed. 82 S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 83 Rotational moulded polyethlene water storage tanks of capacity exc 500 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tANK of any capacity complete all as specified & directed. 84 Rotational moulded polyethlene water storage tanks of capacity exc 1000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tANK of any capacity complete all as specified & directed. 85 S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixedcast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed. 86 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etccomplete all as specified and directed. 87 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified and directed. 88 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified and directed. 89 110mm bore dia PVC (SWR) reducers, complete all as specified and directed. 90 110mm bore dia PVC (SWR) branch piece, single (single Y) equal or unequal with parrallel branches fitted with oval access doors, fixed in repairs complete all as specified and directed. 91 110mm bore dia PVC (SWR) bends,any radius (larger bore measured), complete all as specified and directed. 92 75mm bore dia PVC (SWR) bends, fixed in repair, complete all as specified and directed. 93 S&F in repair cast iron 75mm bore Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors, fixed in repair complete all as specified and directed. 94 75mm bore pipe PVC (SWR) vent cowl, fixed in repair, complete all as specified and directed. 95 S&F in PVC floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed. 96 S&F Mild steelTMT bars bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. 97 All asper srl item No 96 above but6 to 8mm dia. 98 S&F in repair Cast iron soil, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, as in floor with all fittings complete all as specified and directed 99 S&F in repair Cast iron soil, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed 100 S&F in repairs 100mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured)complete all as specified and directed. 101 S&F in repairs 100mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access doorcomplete all as specified and directed. 102 S&F in repair cast iron 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors complete all as specified and directed. 103 S&F in repair Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, as in floor with all fittings complete all as specified and directed 104 S&F in repair Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed 105 S&F in repair Cast iron soil, waste and vent pipes, sand cast, 50mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed 106 S&F in repairs 75mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured)complete all as specified and directed. 107 S&F in repairs 75mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access doorcomplete all as specified and directed. 108 S&F in repair cast iron 75mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doorsfixed in repiars complete all as specified and directed. 109 S&F in repair Cast iron floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed. 110 S&F in repair Cast iron cowl of 50mm bore complete all as specified and directed. 111 S&F in repair Cast iron Swan necks (or offsets) upto 152mm projection for 100mm to 50mm pipe complete all as specified and directed. 112 M&L forcement concrete 1:2:4 Type B1 (using 20 mm graded crushedstone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings upto 60 cm in height,water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and directed 113 M&L 10 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) 114 M&L 20 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) 115 M&L for preparation of surfaces and apply first coat fiber reinforced elastomatic liquid water proofing membrane formulated with PU hybrid ploymersand reinfoecing acrylic fibers with sun reflective index(SRI) of 100-110 having maximumelongation of 350% tensile strength od 2.9 Mpa and shall have crack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic presure and reduce surface temprerature upto 10 degree celsius with 33% ditution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 grm/sqm and pastinf it properly with overlaping of 50mm and allow it to dry, Apply second coat of undiluted coat @ 0.45 ltr/ Sqm . Apply third and final coat undiluted @ 0.45 ltr/sqm complete application to be done by the manufacture of authorised applicator complete all as specified and directed. 116 Note for item No 115 :-(a) Cleaning of dust, removal for all loose existing bituminous material manually with heat torch gun to get smooth plain finished surface, removing of vegetation/plantaion with no loose material on surface.(b) Conduct ponding test after 7 days, continnue curing of 14 days.(c) All Shifting/ removing of any wire/cable/AC unit/Water tank of any capacity or other any object as per site requirement an re-fixing the same, if needed shall deemed to be included in the quoted rates by the contractor. (d) Removal of any loose/packed items such as mud phuska, terrace tiles, cement screed bed shall be removed and surface shall be made free from depressions before applying treatment to the roof. Quoted rates shall deemed to be includedthis fact into account and no extra payment shall be made on this account. (e) Contractor shall verify availability of the materials in full qty from market before quoting the rates as no extension of time on this ground shall be granted.(f) All the sample/ make for water proofing material mentioned in item shall be got approved from the GE before procuring bulk quantity of material. 117 Supply only liquid water proofing compoundcomplete all as specified and directed. 118 M&L PCC 1:2:4 type B1 (using 20mm graded crushedstone aggregate) as in surface channel and drains, benching of manholes complete all as specified and directed 119 Cutting into existing manholes for connecting new drains for ineternal dia of pipe 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. 120 M&L for Providing, precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), as in cover slabs (for septic tanks, manholes and the like) and similar articles including necessary moulds/fromwork etc, set and jointed in cement mortar (1:6) complete all as specified and directed. 121 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixturesuch as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc with cement moratr and finishers to match existing surface complete all as specified and directed. 122 M&L for point wiringusing 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with 1.2mm thick GI/MS pressed steel sunken boxes of adequate size,3mm thick plastic laminated sheet cover fixed with brass screws including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. Note: 1) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible. 123 All as per Ser item No 121 but for one light point controlled bytwo 2 way switch. 124 All as per item no 121 One bell/ buzzer point controlled by one bell push 5/6 Amp AC 240 Volt etc complete all as specified and directed. 125 All as per Ser item No 121 but for one5/6 Amp socket outlet point on same board controlled by one switch. 126 All as per Ser item No 121 but for one5/6 Amp socket outlet points on independentboard controlled by one switch. 127 All as per Srl item No 121 here-in-before for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor. 128 S&F switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed. 129 S&F socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type with shutters, 240 volts complete all as specified and as directed. 130 S&F socket outlet 2 in 1, 3 pin, 5/15 Amp flush type, 240 volts complete all as specified and as directed. 131 S&F socket outlet 2 in 1, 6 pin, 6/16 Amp flush type, 240 volts complete all as specified and as directed. 132 S&F switch 15/16 Amps, flush type, 240 volts complete all as specified and as directed. 133 S&F switch piano flush button single pole two way 5 Amp 240 volts complete all as specified and as directed. 134 S&FBell push, flush type, 5/6 Amp AC 230 Volt etc complete all as specified and directed. 135 S&F Bell Ding Dong AC 230 Volt, single Pole etc complete all as specified and directed. 136 S&F switch flush button single pole two way 5 Amp complete all as specified and as directed. 137 S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals. 138 S&F stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and directed. 139 S&FLamp holder jumbo modular type, PVC/Polycarbonate type with back plate complete all as specified. 140 M & L for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 20mm dia 1.5mm thickwith all accessories incl cutting chases on wall andmaking good to the disturbed surface of wall/floor with cement mortar 1:4 and finishes to match existing surface complete all as specified and directed. 141 M&L for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 4 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 25mm dia 1.5mm thickwith all accessories, fixed to surface/recessed including taking down existing submain with old unsv PVC conduit complete all as specified and directed. 142 S&F in replacement Triple pole and neutral DB 4 waysheet metal enclosures double door 415 V AC,50 Hz AC with IP-54 1K-09 rating having fully insulated copper bus bar of rating not less than 200 Amps , insulated neutral bar, earth bar and cable ties of cable mangement including ployuthrene gasket making good disturbed surface to match with existing wall, painting the plastered surface with same colour complete all as specified and directed. 143 MCB DB, SPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wallincluding cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. 144 S&F MCB SP 240V, 50Hz of rating6 to 32 Amp, B curve using suitable size copper thimbles complete all as specified and directed. 145 All as per Ser item No 143 but for size 32 Amps MCB SPN. 146 S&FMCB, TPN 40 to 100 Amps, 415 volts, C curve, 50Hz, 10 KAcomplete all as specified & directed. 147 S&F in replacement MCB, SPN, 240 volts, 50Hz, 10 KA of rating 32 Amps,C series complete all as specified & directed. 148 S&F in replacement MCB, SP, 240 volts, 50Hz, 10 KA of rating 5 to 32 Amps,C series complete all as specified & directed. 149 S&Fsurface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protectioncomplete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. 150 S&F in repalcement of intenso LXS LED Batten 20 watt of size not less than 37, 6500 K, 230 volts, PF-0.95, CRI-80, life 25000 burning hours, wall mounted complete with all accessories internely pre wired and including connecting up with 3 core twisted flexible copper conductor cable of suitable size complete all as specified and directed. 151 S&F 20W surface / wall mounted box type batten LED fitting having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. 152 All as per ser item No 150 but for 10 W LED batten fitting 2 feet long. 153 S&F LED wall security lights of 35 Watthaving pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W,IP65 protection, IK07 rating,inbuilt electronic driver withPF>0.95 incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. 154 Taking out carefully seviceable single phase energy meters from meter box after disconnecting electrically and keeping aside for refixing and dismantling old/unsv meter box and removing to store for keeping in safe custody for taking credit and making good to disturbed surfaces of wall, floor, etc complete all as specified and directed. 155 S&F sheet moulded compund (SMC) meter box fire retardant type of sixe not less than 600x500x150mmto enclose 04 Nos single phase electric meters with hinged type front operated door having transparent acrylic sheet & proper locking arrangement and flush mounting in wall including refixing the serviceable electirc meters dismantled under item nO 30 & making electirc connections inluding cleaning of disturbed area and making good the disturbed surface and matching with existing specification complete all as specified and directed. 156 S&FLED Building light 60 Watt, 230 volts with surge protection not less than 4 KV and 10 KV separate in the lighting housing, IP 65, Energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LEDs as light source and electronic driver fixed on pole/wall along with service bracket as per sample, clamps, nuts, bolts, and washers including making electric connection with 1.5 Sqmm multistranded 3 core aluminium conductor cable PVC insulated complete all as specified and directed. 157 Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts gradewith aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 4 core, including taking down old, complete, all as specified and directed.Note : All the cable entires should be through proper metallic cable gland. 158 Excavation in trenches in any type of soil not exceeding 1.5 m wide and n.exc. 1.5 m deep and getting out for laying of cables complete all as specified and directed. 159 Returning filling, in including spreading , levelling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed. 160 Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. 161 M&L for sand filling in trenches dry and clean san dunwashed including punning around cble for protection of under ground cable complete all as specified and directed. 162 40mm dia GI tubing, light grade with all fitting laid in trenches or fixed on wall or along pole complete for protection of electric cable/strip, complete all as specified and directed. 163 M&L for well burned bricks, laid flat (old size) sub class B designation 75 for cable protection complete all as specified and directed. 164 Earthing complete with galvanized steel earth plate electrode60cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of2009.Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmmin lieu of CI cover.
