|
| 1 | Surface dressing n.exc 15 cm thicknes in hard and hard and dense soil complete all as specified and directed |
| 2 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard dense of soil complete all as specified. |
| 3 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.. |
| 4 | Returning, filling in hard and dense soil in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified. |
| 5 | M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified. |
| 6 | M&L for form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concrete complete all as specified. |
| 7 | M&L for form work to sides of square or rectangular columns, pillars, posts and struts for rough finished surfaces of concrete complete all as specified. |
| 8 | M&L for formwork to sides and soffits of floor or roof beams, beam hunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished flat surfaces of concrete complete all as specified and directed. |
| 9 | Material and labour for form work to soffits of suspended slabs such as roof slabs floor slabs, landing and similar works not exceeding 200mm thick finishing concrete surfaces fair and even all as specified. |
| 10 | M&L for form work to edges of concrete flat, opening in concrete walls and roofs not exceeding 20 cm wide and sides of RCC/PCC bands and similar works exceeding 10cm but n.exc 20cm wide all as specified. |
| 11 | M&L, Brick work with sub class ‘B’bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified. |
| 12 | M&L, Brick work with sub class ;B; bricks old size half brick thickstraight or covered on plan exc 6 m mean radius built in CM 1:4 using old size brick complete all as specified and directed. |
| 13 | M&L for RCC M-25 type A-1 (using 20 mm gradedstone aggregates)in chajjas complete (reinforcement to be measured separately). |
| 14 | M&L RCC M-25 type A-1 (using 20 mm graded stone aggregates) in slabs supported on complete all as specified and directed. (reinforcement to be measured separately). |
| 15 | M&L RCC M-25 type A-1 (using 20 mm gradedstone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed. (reinforcement to be measured separately). |
| 16 | M&L RCC M-25 type A-1 (using 20 mm gradedstone aggregates) in columns, pillars, posts & struts complete all as specified and directed. (reinforcement to be measured separately). |
| 17 | M&L RCC M-25 type A-1 (using 20 mm gradedstone aggregates) in roof beams,cantilevers,lintels,chajja etc complete all as specified and directed. |
| 18 | M&L for mild steel TMT bars 10 mm diaand over , cut to length, bent to shape required including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to fe-410-0 all as specified. |
| 19 | M&L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to fe-410-0 all as specified. |
| 20 | M&L formild steel TMT bars 5mm dia and overupto and including 10mm dia stirrups spacers and binder, cut to length, bent to shape required including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to fe-410-0 all as specified. |
| 21 | M&L for providing precast cement concrete type B-1,1:2:4 (20mm graded aggregate) as in cover slabs ,shelves and similar articles all as specified ,set in cement mortar 1:6 |
| 22 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed. |
| 23 | M&L forrendering 15 mm thick cement plaster in cm 1:4 mixedwith water proofing compound 2% by weight of cement and finish the surfaces even and smooth without using extra cement complete all as specified (WPC shall be measured separately). |
| 24 | M&L forrendering 10 mm thick cement plaster 1:6 on brick surfaces other than fair face finished fair even and smooth without using extra cement complete all as specified. |
| 25 | M&L forrendering 5 mm thick cement plaster in cm 1:3 on ceiling Finishing the surfaces fair even and smooth without using extra cement complete all as specified. |
| 26 | Supply only integral water proofing compound all as specified |
| 27 | M & L for applying 1mm putty on wall complete all as specified and as directed by the Engineer-in-Charge |
| 28 | M & L for applying two coat of oil bound distemperover prepared new plastered surface all as specified and as directed by the Engineer-in-Charge |
| 29 | M&L for Preparing new plasteredsurfaces of ceiling and applying two coats of white wash complete all as specified. |
| 30 | M&L for two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm per ltr and UV resistance as per IS 15489-2024, alkalied fungal resistance, dirt resistance exterior paint of required shed with silicon additives @ 1.45 ltr per 10 sqm area and including primer coat of exterior primer applied @ 0.90 ltr per 10 Sqm over new prepared surfaces. |
| 31 | M&L hard core of base n.exc 63mm of broken stone or bolder, deposited, spread and leveled in layers n exc. 15cm thick watered and rammed to a true surface. |
| 32 | M&L for cement concrete75 mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base complete all as specified and directed. |
| 33 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandt complete all as specified and directed. |
| 34 | M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and as directed. |
| 35 | M&L for Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified. |
| 36 | M&L for non skid white ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc completeall as specified and as directed. |
| 37 | M&L for non skid white ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in dado/Skirting etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc completeall as specified and as directed. |
| 38 | M&L forglazed ceramic coloured tiles of size 600x1200x 7-8 mm thick onvertical surfaces such as skirting/dado set and jointed in neat cement slurrypointed,jointed in coloured cement to match completeall as specified and as directed |
| 39 | Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection completeall as specified and as directed |
| 40 | M&L for galvanized steel water tubing 15 mm dia medium grade including all fitting and complete to walls and ceiling on laid in floorsall as specified and as directed |
| 41 | M&L for galvanized steel water tubing 20 mm dia with all fittingmedium grade and completeall as specified and as directed |
| 42 | M&L PVC connection suitable for 15 mm bore GI pipe, 450 mm long of pressure rating 6 kg/sq cms fixed complete including one GI unions at each end and complete to walls and ceiling on laid in floors all as specified and as directed |
| 43 | M&L for600 mm x 450 mm mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and completeall as specified and as directed |
| 44 | M&L1000ltrs rotationalmoulded polyethylene water storage tank (cyclindrical vertical with closed top) fixed in position and completeall as specified and as directed |
| 45 | Supply and fixing ball brass valves 20 mm bore dia high pressure with polythene float and fly nut complete screwed iron pipe or brass ferrule as specified. |
| 46 | S&F, Gun metal Glabe or gate valves with iron wheel head screwed both ends for pipe, 20mm bore dia of pipe as specified. |
| 47 | S&F PVC valve less, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including bracket and including taking down existing flushing cistern any description |
| 48 | S&F for flush pipe of polyethylene of low or high density PVC, 32 mm dia and complete all as specified and as directed |
| 49 | S&F for vitreous china squatting pan \" Orissa Pattern\" size 580 x 440 mm white with integral foot rest and trap including connection to flushing pipe, anti-syphonage pipe,etc. all as Specified. |
| 50 | Providing and fixing table top white/coloured vitreous china wash basin of size 630 x 450mm fixed over 750mm x 600mm x 20 mm granite as platform with and including 32 mm dia waste coupling , CPwash bashin mixer(hot and cold) having long neck and aerator complete including making necessary holes and other cutting in the counter top and fixing the wash bashin etc completeall as specified and as directed |
| 51 | Supply and fixing cast copper bib taps 15 mm bore dia long body,fncy type chromium plated with crutch or butterfly handles, screwed down, suitable for 15 mm bore GI pipe as specified. |
| 52 | Supply and fixing Angular stop cock 15 mm bore dia cast copper alloy fancy type,chromium plated with capstan head screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes and completeall as specified and as directed |
| 53 | S&F for Chromium plated shower roses with or without swivel joints 125mm size complete all as specified and directed. |
| 54 | S&F, Stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore complete all as specified and directed. |
| 55 | Supply and fixing tubular towel rail chromium plated 20 mm dia D type 60 cms long and completeall as specified and as directed |
| 56 | S&F CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge. |
| 57 | S& F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete as specified. |
| 58 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc. and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified and as directed by the Engineer-in-Charge. |
| 59 | M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in filling in holes of hold fasts and back filling of chowkats complete all as specified and directed. |
| 60 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 61 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 62 | &F 30 mm thick FACTORY MADE WIRE MESH SOLID WPC both side Plain DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings. complete all as specified and directed |
| 63 | Supplied and fixed butt hinges, extruded aluminium alloy with galvanized mild steel hinge bin, anodized and fixed type C-22 100mm size as specified. |
| 64 | Supplied and fixed 100 mm size extruded aluminium alloy handles, fabricated type anodized as specified. |
| 65 | Supplied and fixed 200 mm size aluminium anodized barrel tower bolt of extruded section all as specified. |
| 66 | Supplied and fixed aluminium alloy, anodized sliding door bolt with hasp and staple bolt type and fixing clips of sheets, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, length 300 mm as specified. |
| 67 | Material and labour for floor door stopper of aluminium alloy body and tongue, anodizedwith hard drawn steel spring fixed in floors, length of cover plate 150 all as specified. |
| 68 | S&F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 69 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charg |
| 70 | Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means ofM.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of \"H\" section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. \"U\" cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer in-charge |
| 71 | M&LAnodised aluminiumventilator shutters, fixed type without sash bar, all aluminium section weighing 0.55 kg/m including outer frame and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 72 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) including outer frame upto 1.50m height made of including outer size frame 116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 73 | M&L Figured glass, pin head type 3mm thick and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete. |
| 74 | S&F,110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in wall, complete all as specified and directed. |
| 75 | S&F,110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 76 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or walland complete all as specified and directed. |
| 77 | S&F PVC (SWR) bends any radius 75mm bore. |
| 78 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door. |
| 79 | S&F PVC (SWR) vent cowl 110mm bore. |
| 80 | S&F for cast iron nahani trap100mm dia including grating, jointing to waste pipe complete all as specified. |
| 81 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 82 | M&L 100mm dia salt glazed stoneware drain pipe laid in trenches and jointed in neat cement slurry complete all as specified |
| 83 | M&L for concrete bed to drain pipe (100 mm dia) in cement concrete 1:4:8 type D2 including packing under and haunching against the sides of pipe after they are laid and tested all as specified. |
| 84 | M&L for PCC type B2 1:2:4 (40mm graded aggregate) as surface channels and drain compelete all as specified and directed. |
| 85 | M&LMoorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringcomplete all as specified and directed. |
| 86 | M&L applying water proofing treatment with the following(a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 160gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane including Aluminium paint on top surface |
| 87 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stilgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately |
| 88 | Supply only integral water proofing compound complete all as specified and as directed. |
| 89 | S&F 25mm dia chromium plate curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge. |
| 90 | M & L for concealed point wiring complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed for the following :- |
| 91 | (a) One light point controlled by one switch |
| 92 | (b) One fan/exhaust point controlled by one switch & regulator. |
| 93 | (c) One 3/5 pin5 Amp socket outlet point controlled by one switch on independent board. |
| 94 | (d) One 3/5 pin5 Amp socket outlet point controlled by one switch on same board. |
| 95 | Description all as per item No 4 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 96 | S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected. |
| 97 | S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and asdirected. |
| 98 | S&F switch piano flush button type 15 Amp single pole one way complete all as specified and asdirected. |
| 99 | S&F socket outlet2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected. |
| 100 | S & F delux Fan Regulator electronic rotary, step type 240 Volt50 Hz,complete all as specified as directed. |
| 101 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed |
| 102 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. |
| 103 | S&F ceiling rose,surface bakelite 63 x50mm three terminals completeall as specified and asdirected. |
| 104 | S&F sheet metal enclosure double doorconcealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed . |
| 105 | S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , \"C\" series, complete all as specified and as directed with copper lugs |
| 106 | S&F MCB single pole 6 to 32Amps 240 V,10KA, \"C\" series,complete all as specified and as directed |
| 107 | Supply and fixing in repair 22 W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge. |
| 108 | Supply and fix LED 35W street light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminiumIP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtrlength with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesinglecorePVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed. |
| 109 | Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel or strip and overall PVC sheathed, 10 sq mm 4 core ISI Marked as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed. |
| 110 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. |
| 111 | S&F storage type water heater (Geyser),5 star BEE rating, 230 Volt AC, 25 Ltrs capacity comprising Stainless steel inner tank,suitable heatng element, thermostate with adjustable temperature setting , indication lamps provision for inlet outlet and air vent connections & NRV,inclucluding all fixing arrangement such s faster bolts, nuts washers etc complete including making gooddisturbed wall surfaces matching with the existing surfaces and finishing all as specified and as directed. |
| 112 | S&F air fresh fan 250 mm sweep noiseless light-weight rust proof body self closing louvers and blades complete with all arrangements of making hole complete all as specified and as directed. |
| 113 | S & F sheet metal enclosure with two pin socket , chain plug cover with one MCB SP of 20/32 Amp capacity with alignment 10 KA \" c’ seriescomplete all as specified and as directed. |
| 114 | M&L pipe galvanised iron of size 50 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge |
| 115 | S&F BLDC Ceiling fan complete with three aluminium blades down rod, snackel clamp, reel insulator, fan canopy split pin and accessories 230 V, 1200mm sweep with service value not less than 7.8, power consumption not more than 28-30 watt and minimum air delivery of 210-230 CMM, BEE 5 star rated, two core PVC insulated copper wire white sheathed of size 0.5 sqmm from fan connector to ceiling rose complete all as specified and directed.NOTE:-(I) Writing MES no in 20mm letter size with black paint etc is deemed to be included in quoted rate. (ii) Old fan deposit in store yard. |
| 116 | S&F gun metal globe or gate valves of size 20 mm bore ISI marked with iron wheel head screwed both ends for iron pipe all as specified and directed. |
| 117 | Cutting the existing DI/CI pipeAnd reducing to required length in position for inserting new Tees, branches etc. including fitting exc refilling ramming complete. |
| 118 | Supply and fixing galvanised mild steel water tubing of 20 mm dia bore medium grade ISI marked with and incl all fittings like bends, elbow, Tee, reducer sockets & union etc laid in trenches, under floor or fixed to walls / ceilings complete all as specified and as directed. |
| 119 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
