|
| 1 | Dismantling of wooden kitchen cabinat and cupboard fixed in any position complete all as specified and directed. |
| 2 | M&L for 18 mm thick ply wood grade BWR, type BB fixed with screws to timberframe work, block boards, grade 2 quality, interior grade, commercial type , fixed with screws to timber framed work for kitchen cabinat, cupboard etc completeall as specified and directed. |
| 3 | M&L for 12 mm thickply wood grade BWR, type BB fixed with screws to timberframe work for kitchen cabinat, cupboard etc completeall as specified and directed. |
| 4 | M&L for0.9mm thick decorative laminate type I, of surface finish, colour and pattern as approved , fixed with approved adhesive as per manufacturer,s instructions completeall as specified and directed. |
| 5 | S&F for 50 mm size Butt hinges, heavy weight, cold rolled mild steel, and fixed completeall as specified and directed. |
| 6 | S&F Ball catches with 8 mm dia steel ball, and brass body and strikoing plate including letting in and fixed completeall as specified and directed. |
| 7 | S&F for 100 mm long Aluminium handles, cast type, anodised completeall as specified and directed. |
| 8 | M&Lfor second Classhard wood plain fillets, square, rectangular or tringular in section ,clean sawn, secured with nails or brads sectional area not exc 3 sqcm completeall as specified and directed. |
| 9 | M&LIst class hard wood plain, solid, straight frames, wrought , framed rebated on the solid round or chamfered, put together with glue pinned at joints completeall as specified and directed. |
| 10 | M&L for french polishing on wooden surfaces of any description, including cleaning and preparing the surfaces including a coat of wooden filler on new works with two or more coats completeall as specified and directed. |
| 11 | Taking down chowakat with shutters of any description n exe 1.5 sqm each completeall as specified and directed. |
| 12 | Taking down chowakat with shutters of any description exe 1.5 sqm but not exc 4.0 Sqm each completeall as specified and directed. |
| 13 | Taking down shuttersexe 1 sqm n exc 2 sqm each completeall as specified and directed. |
| 14 | Taking down shuttersexe 2.0 sqm each completeall as specified and directed. |
| 15 | M&L for second class hard wood plain solid straight chowkhats and frames, wrought, framed rebated of the solid rounded or chamferred put together with the pinned and joints completeall as specified and directed. |
| 16 | M&Lsecond class hardwoord, 35mm thick, plain, framed, paneled shutters (any number of panels) of timber flat on both sides complete all as specified and as directed. |
| 17 | S&F second class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Sec 8 Cl 8.24 (a), 35mm thick completeall as specified and directed. |
| 18 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed. |
| 19 | S & F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification completeall as specified and directed |
| 20 | S&F powder coated aluminum frame for window / ventilator one or more rebate including joining cleat for fixingcompleteall as specified and directed. |
| 21 | S&F powder coated anodised aluminum shutter forwindow / ventilatorshutters ,including necessary joining cleat,glazing cleap ,ruber neoprene packing, snap beading handle, hinge, screw etc complete for fixingcompleteall as specified and directed. |
| 22 | S&F for aluminum powder coated (poder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc completeall as specified and directed. |
| 23 | S&F for mild steel framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 completeall as specified and directed. |
| 24 | S&F sheet glass 3.00 mm thick ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane completeall as specified and directed. |
| 25 | S&F sheet glass 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane completeall as specified and directed. |
| 26 | Dismantling wall and celling board (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets any thickness including cover fillets complete all as specified & directed |
| 27 | M&L for for false ceiling 5mm thick PVC panesl (coloured/designe) includingmoulding of pattern as approved by GE on GI grid frame workconsisting grid & GI main tee 32x 24mm, cross tee 25x24 mm and angle of walls of sizeof grid not less than 600x600mm hung from ceiling using 3mm GI wire suspendors spacers at 120cm c/c on main runners includingmaking nitches for light, fan decorative / concealed light fittings and fasteners if required complete all as specified and directed |
| 28 | Repair/servicing to exsisting rolling shuttersfor openingof size exc 6 sqm and n exc 12 Sqm at and at all heights above floor level ofcomprising of removing the exsisting hood cover, rectifying damages, removing all shafts along with bearings, springs, gears etc. reconditioning/ adjusting the tension of springs, rectifying damages, if any, to laths, grills flats, bottom plates guide channels, locking arrangements, handles including providing end clips and pins, welding where required reassambling the shutter, refixing the same in original position.includingLuberating all moving parts and replacement of defective parts , operating and commissioning the shutters to the entire satisfaction complete all as specified and directed.Note: (a) Rate includes taking down and refixing of rolling shutter in same or other opening (b) Cost of spares replaced against above mentioned item shall deemed to be included in the rate quoted |
| 29 | Ditto all as per item No 28 above but rolling shutter for opening of size exc 12 sqm and n exc 24 Sqm |
| 30 | Repair/Maintenance to aluminium doors / windows, requiring carpentry work and carrying out minor repairs such as tighting of screws/nails, readjuset the fram / Rail/Glass etc includingtaking up or down the paneland including replacing of defective itemscomplete all as specified and directedNote :Cost of spares replaced against above mentioned item shall deemed to be included in the rate quoted |
| 31 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire average width of apperture 1.40 mm and fixed in steel window with aluminium clip / wooden beading /stainless steel nut bolt complete all as specified and directed |
| 32 | S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire average width of apperture 1.40 mm and fixed in steel window with aluminium clip / wooden beading /stainless steel nut bolt complete all as specified and directed |
| 33 | S&F butt hinges, medium weight, cold rolled mild steel , size of hinges 100mm and fixed to wooden surface complete all as specified and directed |
| 34 | S&F for 150mm long mild steel barrel tower bolt ,stove enamelled black ,with bright bolt and fixed complete all as specified and directed |
| 35 | S&F extruded aluminium alloy handle fabricated type annodised size of handle 100mm complete all as specified and directed |
| 36 | S&F 300 mm long mild steel sliding door bolt , plate type stove enamelled black , with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts , four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 37 | S&F 140 mm overall lengthfloor door stopper of aluminium ally body and tongue anodised, with hard drawn steel spring fixed in floorscomplete all as specified and directed |
| 38 | S&F in repairs helical door spring 150mm mild steel with steel wire spring stove enamelled black complete all as specified and directed |
| 39 | S&F in repair 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 40 | S&F in repair butt hinges, medium weight, cold rolled mild steel , size of hinges 100mm and fixed to wooden surface complete all as specified and directed |
| 41 | S&F in repair 150mm Aluminium handles, cast type, anodised complete all as specified and directed |
| 42 | S&F 100mm Hasp and staple, of aluminium alloy body anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 43 | S&Fin repairs Stainless steel plate utensil rack of size 900X600X1mm thick, 30cm width and fixed to wall surface with necessary bolts complete all as specified and directed |
| 44 | S&F in repairs vitreous china ware wash basin white, flat back size 550 X 400mm including 32 mm CP waste coupling, chain and plug, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let PVC connections 600 mmcompletecomplete all as specified and directed |
| 45 | Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified and directed |
| 46 | M&L for rendering 15mm thick cement plaster in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and directed |
| 47 | M&L for preparation newly plastered surfase of wall and applying two coats of OBD including2mm thick wall care putty complete all as specified and directed |
| 48 | M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed. |
| 49 | Demolition of brick or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facing dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 50 | M&L precast cement concrete block masonry with solid block, type C-1,(1:3:6) mix (Using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed. |
| 51 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 52 | M&L for plain cement concrete (1:2:4) Type B-1 (Using 20mm graded stone aggregate) as in hold fast blocketcincluding necessary form work complete all as specified and directed. |
| 53 | S&F in replacement of blinds for window opening (design and pattern as approved by GE) horizantal/vertical operated with all necessary fitting comple all as specified and directed. |
| 54 | S&F in repairs formaking and fixing 12mm thk single/double shutter toughned glass doors, at entrance, etc. (each door shutter counted (individually) of size as per site requirement, swing type door openable both sides made out of 12 mm thk. clear toughened float glass, edge polished, fixed in wooden top and bottom rails of approved colour and finish, fixed on Everite/ozone/ Hardwyn/ Dorma or equivalent floor springs set, upper patch, lower patch, lock key plate, provision of locking system, 5 etc. as per approval. One set of 25 mm dia S. S. brush finish pull handles (approx. 300mm length) \"C\" shaped, of appoved make & design on both sides. Including providing \"PUSH\" * \"PULL\" sticker lables of approved design & make. The rate to include all materials, labour, transport, taxes, delivered and placed in position at site of work. Each door shall be treated individually with complete set of accessories to be provided on each door complete all as specified and directed. |
