|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Dismantling door or window including chaukhats with hold fasts and including stacking of materials as directed by the Engineer in charge with in a distance of 60 meter (200 feet) |
| 3 | Dismantling old plaster including raking out joints and disposal of debris within 60 meters distance. |
| 4 | Earth work in foundation in dry soil (loam clay or sand) including lift upto 1.50 M and lead upto 30 M including back filling, watering and ramming of excavated earth into the trenches or into the space between or into the plinth with removal and disposal of surplus earth as directed by the engineer-in -in-charge up to a distance of 30 M from the foundation treanches. |
| 5 | Supplying & laying P.C.C. 1:4:8 (1 cement: 4 coarse sand: 8 aggregate) using size (10-20) mm graded crushed aggregate i/c all cost materials, labour, T&P etc. complete. |
| 6 | Brick masonry (M-105) with cement mortar of ratio 1:4 (1 cement: 4 coarse sand) i/c all cost of material, labour, T&P etc complete of work. (230 mm thick wall) |
| 7 | 12 mm thick cement plaster (for Internal work) in 1:4 (1 cement: 4 coarse sand) cement sand mortar i/c all cost of materials, labours, T&P etc complete of work. |
| 8 | Provinding wall putty on new interior or exterior surface after cleaning the old painted surfacewith approved quality material of Berger/J.K./Birla or similar make 02 coats i/c all cost of materials labour and T&P etc complete. |
| 9 | Scrapping old colour or white washing/snowcem/cement including all cost of materials labour and T&P etc. |
| 10 | Distempring one coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface to with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British, \"Shalimar asian paint after throughtly brushing the surface free from mortar droppings and other froeign matter and also including preparing the surface even and sand prepared smooth including cost of all materials. |
| 11 | Finishing two coat of water proof cement weather coat of approved quality on previously old surface with this paint to give an even shade including all cost of materials labour and T&P etc. |
| 12 | Fabrication and fixing of steel doors, windows including cost of material, cutting, welding, labour T&P required for completion of the work. |
| 13 | Supply & Fixing of flush door of 32 mm. thick i/c. fixing of wooden cleats and stoppers and i/c. fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied. |
| 14 | Providing and fixing Glazed shutters of Teak wood including ISI marked anodised aluminium butt hinges with necessary screws. |
| 15 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. With 2nd class teak wood beading 62X19 mm. |
| 16 | Painting two coat enamel paint on wooden surface (door and window) and one coat of priming i/c all cost of material, labour T&P etc. complete |
| 17 | Painting two coat enamal paint on Steel Surface one coat of priming i/c all cost of material, labour T&P etc. complete |
| 18 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and allaround the column pits. wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along externel perimeter of building, expansion joints, surrounding of pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 part II 1981) Chloropyrophos or any other approved material such as Heptachlor or chlordance will be used the rate of application of chemical emulsion |
| 19 | Supplying and Laying one layer of tarfelt or any other equivalent approved material over roof as per direction of the Engineer-in-Charge including necessary overlap giving a coat of approved mastic paint on the bottom and top of tarfelt supreading of necessary quantity of approved coarse sand or small size bajri and including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 20 | Supply & Fixing 80 mm thick precast cement concrete I-shape interlocking paver block a with top layer of minimum 8mm thickness having plan dimension 200×(160+120mm) of O. P. cement, Smooth high gloss finish, skid reditant, manufactured from rubber moulds through vibro-compression machanism. The compressive strength of concrere paver block shall not be less than 30MPA (M-30) and wight 5kg per no confirming to IS, 15658-2006 with a 4 cm thick layer of fine sand including cost of material, labour, T&P Taxes etc. required for proper completion of the work as directed by Enginner-in-charge. (Colour) |
| 21 | Supplying & laying P.C.C. 1:2:4 (1 cement: 2 coarse sand: 4 aggregate) using size (20-40) mm graded crushed aggregate i/c all cost materials, labour, T&P etc. complete. |
| 22 | S/F WIRING POINT FOR FAN/ EXHAUST FAN (LIGHT DUTY): Wiring point for fan /fresh fan (light duty exhaust fan) with 1.5 sq. mm FRLSh PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit concealed in the wall complete with 14 SWG copper earth continuity wire piano type switch & cealing rose on 3 mm. thick backelite sheet etc. complete in all respect including matching colour wash. |
| 23 | Wiring point for Plug with 1.5 sq. mm FRLSh PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit concealed in the wall complete and partly laid in slab along with the reinfocement before concreting, complete with 14 SWG copper earth continuity wire piano type switch & socket etc. complete in all respect including matching colour wash. |
| 24 | S/F WIRING POINT FOR LIGHT : Wiring point for light with 1.5 sq. mm FRLSh PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit pipe on the surface complete with 14 SWG copper earth continuity wire, GP Box, piano type switch andcelling rose/angle/batten holder on 3 mm thick phenolic laminated backelige steel etc. complete in all respect including matching colour wash. |
| 25 | Providing and placing on tarrace (at all floor levels) polyethylene water storage tank ISI 12701 marked with cover and suitable locking arangement with making necessary holes for inlet, outlet and over flow pipes but without fitting and base support of tank. |
| 26 | Earth work in filling in lawn development & leveling i/c all lift & lead upto 1.0 Km distance all labour, T&P etc complete of work. Please Enable Macros to View BoQ information |
