|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: all kinds of soils |
| 2 | Providing & Laying of stone soling (dully hand packed) including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 3 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level (1:4:8 coarse sand 40mm nominal size crushed stone agg.) Ind. Carriage |
| 4 | P/L in position specified grade of reinforced cement concrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size. Incl carriage |
| 5 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level (1:2:4 coarse sand 20mm nominal size crushed stone agg.) incl carriage |
| 6 | Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size. Incl carriage |
| 7 | RCC work in walls, incld. attchd pilasters, buttresses plinth & string courses, columns, pilars, abts, posts and sturts etc upto floor 5 level excld. Cost of cntring, shuttering, finishing and reinforcement 1:1.5:3 graded crshd stne agg. 20mm nominal size. med. Garrige Pillar |
| 8 | Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (TMT bars of grade Fe-500D or more.) |
| 9 | Brick work with FPS bricks of class designation 75 in foundation & plinth in cement mortar 1:6 (1 cement, 6 coarse sand)Extra for brick work in super structure above plinth level upto floor V Level(by manual means |
| 10 | Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position Imported KD wood |
| 11 | Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISI marked black enamelled M.S Butt hingeswith necessary screws excluding panelling Imported wood 30mm thick. |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 13 | Providing & fixing 3.5 mm Thick Glass panes i/c necessary beading and nails complete as directed |
| 14 | 12mm Cement Plaster of mix 1:6 (1 cement:6 coarse sand) |
| 15 | 6 mm cement plaster to ceiling of mix 1:3(1 cement:3 fine sand |
| 16 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick. |
| 17 | Distempring with 1st quality acrylic washable distemper (ready made) of approved manufacture & of required shade/ colour compleate as per manufacture\"s specifications Two or more coats on New Work |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Including applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 19 | Providing & Laying of stone dust including watering ramming with all carriages loading un-loading etc complete |
| 20 | Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frameswith 10mm dia bolts nuts & wooden plugs and embedding in cement concrete block 30x10x5cm 1:3:6mix (1cement:3coarse sand:6 graded st agg)20mm nominal size |
| 21 | Filling available excavated earth (excl. rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 22 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 23 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete |
| 24 | Centring and shuttering incld. Strutting, proping etc & removal of form work for suspended floors, roofs, landings, balconies & access plateform |
| 25 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Lintel, Beams etc |
| 26 | Centring and shuttering incld. Strutting, proping etc & removal of form work for columns, pillars, piers, abts, posts and strats |
| 27 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. i/c soffits / eaves board Welded |
| 28 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 29 | Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia Gl limpet & bitumen washers complete 0.50mm thick with zinc coating not less than 275g/sqm |
| 30 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x10 mm |
| 31 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm |
| 32 | Providing and Fixing of L Drop of Standard make i/c Locking system Link lock type complete |
| 33 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 34 | Provding & fixing 04 layer 18 gauge (304) plain stainless steel railing of approved make Like Jindal i/c master pillar and boster on alternate steps or equlant i/c welding, polishing as per directions of engineer incharge complete |
| 35 | Bathroom |
| 36 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil : |
| 37 | Providing and Laying of stone soling hand packed including carriage of same from approved source |
| 38 | Providing and laying in position cement concrete 1:4:8 grade (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) of specified grade excluding the cost of centring and shuttering All work upto plinth level incl carriage |
| 39 | Providing and laying in position cement concrete 1:2:4 grade (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) of specified grade excluding the cost of centring and shuttering All work upto plinth level incl carriage |
| 40 | Brick work with common burnt clay(non-modular ) bricks of class designation 7.5 in foundation and plinth incl curing mortar 1:4 (1 cement:4coarse sand) including all carriages extra for B/w on super structure plinth and upto floor V level |
| 41 | Providing and laying in position specified grade of 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. incl carriage |
| 42 | Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size. Carriage |
| 43 | Reinforcement for RCC work incl Straightening cutting, bending, placing in position and binding all complete |
| 44 | Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position Imported KD wood |
| 45 | Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISI marked black enamelled M.S Butt hingeswith necessary screws excluding panelling Imported wood 30mm thick. |
| 46 | Providing & fixing panelling or panelling /glazing in panelled and glazed sutters for dors an dwindowa and clerestory windows. Decorative ply wood one side decorative veneer and comercial veener on other face (type 1) conforming to is 1328 BWR type |
| 47 | 12 mm cement plaster 1:4 mix |
| 48 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick 14 bed of cement mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete in colour such as White, Ivory, Grey, Fume Red Brown |
| 49 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, Including pointing in white cement mixed with pigment of matching shade complete.. |
| 50 | Distempring with oil bound washable distemper of approved 16 brand & manufacture to give an even shade New work (2 or more coats)over and incld. Priming coat with cement primer |
| 51 | finshing walls with water proofing cement paint of approved nd and manufacture & of rad shade to give an even shade wwwork (2or more coats) applied@ 3.84kg/10sam |
| 52 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Including applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and sof |
| 53 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete |
| 54 | Centring and shuttering incid. Strutting, proping etc & removal of farm work for suspended floors, roofs, landings, balconies & access plateform |
| 55 | Providing and fixing soil waste pipes 100mm dia PVC B Class |
| 56 | Providing and fixing vent pipes 75mm dia PVC B Class |
| 57 | Pvc colour 100 mm |
| 58 | P/f of Pvc floor trap with jali |
| 59 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-inchares Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc |
| 60 | N-16 pipe, 25mm OD(SDR-7.4) |
| 61 | External work including trenching, refilling etc PN-16 pipe, 32mm OD (SDR-7.4) |
| 62 | Providing and fixing PPR Unions PPR Union 25/32mm |
| 63 | Providing and fixing water closet squatting pan (indian type WC pan) with 100mm sand cast iron P or S trap, 10 litre low level PVC flushing cistern Incl. flush pipe with all fittings and fixtures complete incl. cutting and making good the walls and floors whereever required\" (Orissa pattern white viterous china W.C pan of size 585x 440mm with integral type foot rests. |
| 64 | Providing and Placing in terrace PVC storage tank with cover and suitable locking arrangement incl. making necessary holes for inlet, outlet and over flow pipes incl. all fittings incl. all fittings & Ball cock of approved size |
| 65 | Stainless steel heavy duty Bib cock long nose |
| 66 | Stainless steel heavy duty angle valve |
| 67 | Pvc connections |
| 68 | P/F manhole 1x1 i/c brick work , plaster poslishing complete as per directions of Eic |
| 69 | Dry ruble massonary with hard stone in foundation and plinth using quarry stone with bond stones including all carriages complete |
| 70 | Providing and fixing mirror including frame (2\"x3\") |
| 71 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 72 | Providing and fixing of water heater (Gyzer) 50 Lit capacity of approved make and manufacture i/c all necessary fittings complete |
| 73 | Providing and fixing stainless steel soap case |
| 74 | Filling available excv. Earth(excld. Rock) in trenches plinth sides of foundation etc. layers not excd. 20cm in depth consolidating each deposited layer by raming and watering lead 50m and lift upto 1.5 mtr |
| 75 | P&F of light illumination of temple Bijbehara Anantnag, DTK |
| 76 | Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch, modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make) incl. cost of conduit. |
| 77 | Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) incl. cost of conduit |
| 78 | Supplying and fixing of suitable size Gl box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 15/16 A modular socket outlet and 15/16A modular switch, connections, etc. as required. (Havells/SSK/ Anchor/ ABB/Schneider or equivalent) |
| 79 | Supplying and fixing of suitable size Gi box with modular plate and modular cover in front 12 on surface or in recess, including providing and fixing of 2 no.3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ABB/Schneider or eq.) |
| 80 | Supplying and fixing of modular sockets/indicators/switches on existing modular plate and switch box, incl. connections, etc. as required. (Havells/SSK/ Anchor/ABB/Schneider or equivalent) 1.3 pin SA-10A socket |
| 81 | ii. indicator. |
| 82 | Point wiring for 5A-10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS 300 PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface conduiting system and earthing the point with 1 * 2.5 sq. mm single core copper wire (loop earthing), (Maximum two points shall be connected on one circuit). (Havells/ Polycab/Anchor/Finolex/KEI/RR or equivalent) incl. cost of conduit |
| 83 | Supply, installation, testing and commissioning of 18 Watt LED recessed/ mounted 50 (round or square) Down lighters having aluminum body, minimum 100lm/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India, Operating temperature - 10 deg * C to 45 deg * C The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/Philips/ Crompton/Jaguar/Wipro). Commercial series. |
| 84 | Supply, installation, testing and commissioning of 1 star 1200 mm sweep ceiling fans of 14 Havells / Crompton Greaves/Bajaj/ Usha (Sample to be got approved), incl. cost of extension of Gl rod (if required) and making of necessary connections. |
| 85 | Supply and fixing of two module stepped electronic fan regulator on the existing modular 14 plate switch box, incl. connections but excl. modular plate etc. as reqd. |
| 86 | Supply, installation, testing and commissioning of 10 Watt (2 feet long) LED wall mounted 16 batten (tube lights) having aluminum housing, minimum 100lm/w, average life 50000 hours (Commercial series) The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of one year reckoned from the date of successful commissioning/handing over of site to the intending department. (Havells). |
| 87 | Supply, installation, testing and commissioning of 200-250 mm sweep shutter type 12 exhaust fans, incl. making of space in walls/ windows as per site and necessary connections. (Havells/Philips/ Crompton). |
| 88 | Supply, installation, testing and commissioning of 100Watt LED Flood/ High Mast lighting 16 luminaries having aluminum body, minimum 100lm / w_{1} the luminary housing should be aluminum and the luminary optics shall have a high efficiency with transmittance, average life 50000 hours, Operating temperature - 10 deg * c to 45 deg * C LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/Philips/Crompton/Jaguar/Wipro). |
| 89 | Supplying and fixing of modular blanking plates on existing modular plate and switch box 30 excluding modular plate as required. |
| 90 | Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, incl. cost of conduits(Havells/Polycab/ Finolex/ Anchor/KEI/RR or equivalent). |
| 91 | 2 x 2.5 sq.mm x 2.5 sq. mm earth wire (Lighting circuit) |
| 92 | 2 x 6 sq.mm 1x 6 sq. mm earth wire (Lighting sub main/AC wiring) |
| 93 | 4 x 16 sq.mm+ 2x 6 sq. mm earth wire (Heating sub main) |
| 94 | Supply and installation of 32A Industrial/modular plug/socket with 32A DP MCB for Acs |
| 95 | Supply and fixing of 6 way (4 18) Double door surface/ recess mounting, Horizontal type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. |
| 96 | Supply and fixing of 12 way Double door surface/ recess mounting, Horizontal type, 01 240 V, SP&N MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer.. |
| 97 | Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 56 KA \"C\" curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 98 | Supply, installation, testing and commissioning of 32 A DP rating 240V, 10 KA \"C\" curve 07 MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 99 | Supply, installation, testing and commissioning of 63A TP&N rating 240/415V, 10 KA \"C\" 03 curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 100 | Providing/laying of shock proof rubber mat of 2mtr x1 mtr and 12 mm thick. |
| 101 | Supply and fixing of ceiling rose, incl. cost of base block and necessary connections. |
| 102 | Providing of chemical earthing as per IS standards by way of digging 8 feet pit then 02 embedding 2.5 mtr. Long Gi earthing electrode, 60 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2\" dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound. |
| 103 | SITC of wall/free standing floor mounted dust and vermin proof compartmentalized cubical panel for electrical Works, made out of CRCA sheet. Other parameters as per required point (a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable extension type structure (b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgear c) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar (d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator, CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge. |
| 104 | Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type) |
| 105 | Normal Incoming |
| 106 | 250 Amp, 36 KA, FP MCCB |
| 107 | Aluminum Bus Bar 500 Amp set of 4 strips |
| 108 | ON Load Change Over Switch FP 160 amp. (Front operated) |
| 109 | Aluminum Bus Bar 300 Amp set of 4 strips |
| 110 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch,Indicating Lamp, etc. |
| 111 | Outgoing |
| 112 | 63 Amp. TPN MCB 10KA |
| 113 | 63 Amp. 10 KA, DP MCB |
| 114 | 40 Amp. 10 KA, DP MCB |
| 115 | Supply, laying, connecting and commissioning of 95 sq. mm 3.5 core PVC insulated and 50 PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable, incl. cost of required al. thimbles duly crimped (under ground). |
| 116 | Supplying and laying of DWC HDPE (Double Wall Corrugated High Density Polyethylene) 40 pipe, 200 mm dia. (OD-200 mm & ID-175 mm) 151 marked along with all accessories like sockets, bends, couplers, etc. with fitting and cutting, jointing, etc. (under ground), including excavation and refilling the trench after laying the pipes.(complete job) |
| 117 | Supply and fixing of fan deep made of heavy gauge sheet in RCC slabs. |
| 118 | Supply and fixing of 4\"/5\" deep junction boxes in RCC slabs. |
| 119 | Supply, Installation, testing and commissioning of 3 star rating 1.5 Ton Inverter type split Air Conditioners suitable for operation on AC supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser latest R410A/ R-32 refrigerant fan motor, start and run capacitors, relay and over load protector internal unit with one indoor and one outdoor unit. The indoor unit fitted on wall by employing suitable clamps and the outdoor unit will be placed on angle iron stand fitted with nut/bolts outside the room to avoid noise, including standard length of suitable size copper tubing covered with nitrile foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ PVC insulated copper cable and a battery operated wireless remote unit. The job includes repairs to walls wherever the same are cut and the AMC of AC for a period of one and a half year from date of successful commissioning. (Daikin/Blue Star/LG/IFB). |
| 120 | Supply, installation, testing and commissioning of relay type voltage stabilizer suitable 06 for 1.5 Ton AC operating from input voltage 90-260Volt thereby producing output voltage of 230volts + 3%. (4 KVA) |
| 121 | Supply, installation, testing and commissioning of 1625VA Power Inverter (Pure Sine 01 Wave type) having generator compatible & provided and fitted with 2 no. 12V, 180 Ah, tall tubular batteries of Exide make and PVC trolley for resting/ housing of batteries. The job also includes terminal connections of batteries, input/output leads of required sizeand length, carriage and applicable taxes. |
| 122 | Supply and erection of Mild Steel Swaged Tubular Pole confirming to IS: 2713-1980 (Part I-II) with base plate. The pole shall be made from steel tube and pipe (IS: 1141, Fe 410)including excavation of the pit and filling up the same with cement concrete of M20 Grade (1:1.5:3 mix) from base plate to 50 cm above ground level, earthing terminal, cable entry with 32mm dia B-class Gl cable sleeves. The pole shall be painted with 2 coats of red oxide primer and 2 coats of enamel paint of silver. The job also includes the cost of form work and carriage of all required materials. (9 mtr. 410 SP-28) |
| 123 | Providing and fixing of detachable type round or square bracket (suitable for 4 lights) of40 mm dia. Gl pipe as per requirement. |
| 124 | Supply, laying, connecting and commissioning of 16 sq. mm 2 core PVC insulated and PVC 300 sheathed/XLPE power cable of 1.1 KV grade Aluminum LT cable, incl. cost of required al. thimbles duly crimped. (under ground). |
| 125 | Supplying and drawing FRLS PVC insulated copper conductor single core cable through pole up to light. A. 2 x 2.5 sq. mm (P + N) |
| 126 | B. 1 x 2.5 sq. mm (Loop/Common earth) |
| 127 | Providing and fixing/laying of earthing station by way of placing Gl electrode rod/pipe in 04 a pit, connected through Gl strip. (complete job) |
| 128 | Providing and fixing of sheet steel enclosures with knock out for cable entry/exit, incl. fixing with nut/bolts, fasteners, etc. complete as required and incl.cost of 40A DP MCB for controlling the High Mast Lights/Flood Lights |
| 129 | Supply and fixing of Cove lights/ strip lights around frame work, incl. required chokes at jointing of approved brand and manufacture. (To be got approved before fixing from engineer in charge) Please Enable Macros to View BoQ information |
