Empanelment Of Consultants For Consultancy Service Of Preparation Of Dpr And Design Of New Building, Condition Survey, Renovation / Upgradation, Retrofitting/ Strengthening/ Reconstruction Measures On Existing Building As Per Requirement In Gujarat State- Pre Planning Phase Conducting Topographical Survey By Differential Global Positioning System And/Or Total Station With All Details & Including Taking Spot Levels In Grid Of 5M X 5M Interval As Per Instruction Of Department With Contour Drawing At 0.5Mt Interval And In Required Width Including Submission Of Drawing Area Sheet In (A0 Size) With Title Block, Legend, North Direction And Scale In 3 Sets. (A) ≫ 10000 Sqm Upto To 20000 Sqm, Pre Planning Phase Conducting Topographical Survey By Differential Global Positioning System And/Or Total Station With All Details & Including Taking Spot Levels In Grid Of 5M X 5M Interval As Per Instruction Of Department With Contour Drawing At 0.5Mt Interval And In Required Width Including Submission Of Drawing Area Sheet In (A0 Size) With Title Block, Legend, North Direction And Scale In 3 Sets. (B) ≫ 1000 To 10000 Sqm, Pre Planning Phase Conducting Topographical Survey By Differential Global Positioning System And/Or Total Station With All Details & Including Taking Spot Levels In Grid Of 5M X 5M Interval As Per Instruction Of Department With Contour Drawing At 0.5Mt Interval And In Required Width Including Submission Of Drawing Area Sheet In (A0 Size) With Title Block, Legend, North Direction And Scale In 3 Sets. (C) Upto To 1000 Sqm, Planning Stage Preparation Of Layout And Master Plan For The Entire Site Including Zoning, Circulation, And Integration With Existing Infrastructure, Covering Campus Plan, Fire Safety Layout, Road Network, Drainage System, Water Supply, Storm Water Management, And Footpath Planning, As Per The Requirements And Instructions Of The Engineer-In-Charge, In Minimum 3 Sets In A0 Size. (A) ≫ 10000 Sqm Upto To 20000 Sqm, Planning Stage Preparation Of Layout And Master Plan For The Entire Site Including Zoning, Circulation, And Integration With Existing Infrastructure, Covering Campus Plan, Fire Safety Layout, Road Network, Drainage System, Water Supply, Storm Water Management, And Footpath Planning, As Per The Requirements And Instructions Of The Engineer-In-Charge, In Minimum 3 Sets In A0 Size. (B) ≫ 1000 To 10000 Sqm, Planning Stage Preparation Of Layout And Master Plan For The Entire Site Including Zoning, Circulation, And Integration With Existing Infrastructure, Covering Campus Plan, Fire Safety Layout, Road Network, Drainage System, Water Supply, Storm Water Management, And Footpath Planning, As Per The Requirements And Instructions Of The Engineer-In-Charge, In Minimum 3 Sets In A0 Size. (C) Upto To 1000 Sqm, Preparing Architectural Design Including Key Plan, Layout Plan, Site Plan, Architectural Drawings With Structural Grid, Working Drawings, Centreline Plan, And All Necessary Site Plan Preparation: Indicating Site Boundary, Access, Setbacks, Utility Connections, And Topography Details And Relevant Survey Etc.Detailed Drawings As Per The Instruction Of The Engineer-In-Charge. This Also Includes The Integration Of All Ancillary Details Such As Staircase, Toilet Blocks, Boundary Layout, Ramp, Parking And Utility Allocation. Work Includes Taking Field Measurements, Preparing Drawings In Both Hard And Soft Copy (Autocad), Green Building Design As Per The Relevant Norms If Required And Ensuring Compliance With Applicable Codes (Nbc, Cpwd, Local Bye-Laws). Preparation Of Key Plan: Showing The Location Of The Building Within The City/Town/Village, Road Network, And Surrounding Context Architectural Design Drawing: All Floors’ Plan, Elevation, Sections, Structural Grid Overlay, Toilet/Kitchen/Staircase Detailing And Relevant Items Etc. Working Drawings: Door-Window Schedule, Floor Finishes, Reflected Ceiling Plans, Service Shafts, Wall Sections And Relevant Drawings Etc. Centre Line Plan: Accurate Centre Line Drawing For Construction With Grid References (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing Architectural Design Including Key Plan, Layout Plan, Site Plan, Architectural Drawings With Structural Grid, Working Drawings, Centreline Plan, And All Necessary Site Plan Preparation: Indicating Site Boundary, Access, Setbacks, Utility Connections, And Topography Details And Relevant Survey Etc.Detailed Drawings As Per The Instruction Of The Engineer-In-Charge. This Also Includes The Integration Of All Ancillary Details Such As Staircase, Toilet Blocks, Boundary Layout, Ramp, Parking And Utility Allocation. Work Includes Taking Field Measurements, Preparing Drawings In Both Hard And Soft Copy (Autocad), Green Building Design As Per The Relevant Norms If Required And Ensuring Compliance With Applicable Codes (Nbc, Cpwd, Local Bye-Laws). Preparation Of Key Plan: Showing The Location Of The Building Within The City/Town/Village, Road Network, And Surrounding Context Architectural Design Drawing: All Floors’ Plan, Elevation, Sections, Structural Grid Overlay, Toilet/Kitchen/Staircase Detailing And Relevant Items Etc. Working Drawings: Door-Window Schedule, Floor Finishes, Reflected Ceiling Plans, Service Shafts, Wall Sections And Relevant Drawings Etc. (B) ≫ 2000 To 15000 Sqm, Preparing Architectural Design Including Key Plan, Layout Plan, Site Plan, Architectural Drawings With Structural Grid, Working Drawings, Centreline Plan, And All Necessary Site Plan Preparation: Indicating Site Boundary, Access, Setbacks, Utility Connections, And Topography Details And Relevant Survey Etc.Detailed Drawings As Per The Instruction Of The Engineer-In-Charge. This Also Includes The Integration Of All Ancillary Details Such As Staircase, Toilet Blocks, Boundary Layout, Ramp, Parking And Utility Allocation. Work Includes Taking Field Measurements, Preparing Drawings In Both Hard And Soft Copy (Autocad), Green Building Design As Per The Relevant Norms If Required And Ensuring Compliance With Applicable Codes (Nbc, Cpwd, Local Bye-Laws). Preparation Of Key Plan: Showing The Location Of The Building Within The City/Town/Village, Road Network, And Surrounding Context Architectural Design Drawing: All Floors’ Plan, Elevation, Sections, Structural Grid Overlay, Toilet/Kitchen/Staircase Detailing And Relevant Items Etc. Working Drawings: Door-Window Schedule, Floor Finishes, Reflected Ceiling Plans, Service Shafts, Wall Sections And Relevant Drawings Etc. Centre Line Plan: Accurate Centre Line Drawing For Construction With Grid References (C) Upto To 2000 Sqm, Preparation Of A High-Quality, Detailed 3D Model And Rendering (Exterior/Interior/Site) In Full Hd View (Rendered Images) Format Shall Be Carried Out Using Professional Software Such As Sketchup, Revit, 3Ds Max, Lumion, Or Equivalent, Based On The Approved 2D Architectural Plans (Floor Plans, Elevations, Sections, And Site Layout) Provided By The Department. The Model Will Include All External Architectural Features Such As Façade Treatments, Doors, Windows, Balconies, Parapets, Ramps, Circulation Paths, Roads, Walkways, And Parking Areas, Accurately Representing The Materials, Textures, Colors, And Finishes As Per The Approved Design. Site Elements Including Boundary Walls, Approach Roads, Signage, Security Cabins, And Complete Landscape Features Like Lawns, Trees, Water Bodies, Benches, Lighting Fixtures, And External Furniture Shall Be Integrated To Provide A Realistic And Context-Rich Environment. Where Required, Selective Interior Spaces Such As Lobbies, Corridors, Classrooms, And Key Activity Zones Will Also Be Modelled With Details Of Flooring, Ceiling Finishes, Lighting Fixtures, And Furniture Layouts To Provide A Complete Visual Representation Of Both External And Internal Spaces. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparation Of A High-Quality, Detailed 3D Model And Rendering (Exterior/Interior/Site) In Full Hd View (Rendered Images) Format Shall Be Carried Out Using Professional Software Such As Sketchup, Revit, 3Ds Max, Lumion, Or Equivalent, Based On The Approved 2D Architectural Plans (Floor Plans, Elevations, Sections, And Site Layout) Provided By The Department. The Model Will Include All External Architectural Features Such As Façade Treatments, Doors, Windows, Balconies, Parapets, Ramps, Circulation Paths, Roads, Walkways, And Parking Areas, Accurately Representing The Materials, Textures, Colors, And Finishes As Per The Approved Design. Site Elements Including Boundary Walls, Approach Roads, Signage, Security Cabins, And Complete Landscape Features Like Lawns, Trees, Water Bodies, Benches, Lighting Fixtures, And External Furniture Shall Be Integrated To Provide A Realistic And Context-Rich Environment. Where Required, Selective Interior Spaces Such As Lobbies, Corridors, Classrooms, And Key Activity Zones Will Also Be Modelled With Details Of Flooring, Ceiling Finishes, Lighting Fixtures, And Furniture Layouts To Provide A Complete Visual Representation Of Both External And Internal Spaces. (B) ≫ 2000 To 15000 Sqm, Preparation Of A High-Quality, Detailed 3D Model And Rendering (Exterior/Interior/Site) In Full Hd View (Rendered Images) Format Shall Be Carried Out Using Professional Software Such As Sketchup, Revit, 3Ds Max, Lumion, Or Equivalent, Based On The Approved 2D Architectural Plans (Floor Plans, Elevations, Sections, And Site Layout) Provided By The Department. The Model Will Include All External Architectural Features Such As Façade Treatments, Doors, Windows, Balconies, Parapets, Ramps, Circulation Paths, Roads, Walkways, And Parking Areas, Accurately Representing The Materials, Textures, Colors, And Finishes As Per The Approved Design. Site Elements Including Boundary Walls, Approach Roads, Signage, Security Cabins, And Complete Landscape Features Like Lawns, Trees, Water Bodies, Benches, Lighting Fixtures, And External Furniture Shall Be Integrated To Provide A Realistic And Context-Rich Environment. Where Required, Selective Interior Spaces Such As Lobbies, Corridors, Classrooms, And Key Activity Zones Will Also Be Modelled With Details Of Flooring, Ceiling Finishes, Lighting Fixtures, And Furniture Layouts To Provide A Complete Visual Representation Of Both External And Internal Spaces. (C) Upto To 2000 Sqm, Preparation Of A High-Quality Detailed 3D Architectural Model And Rendering Of A Concept Walkthrough Video Shall Be Carried Out Using Professional Software Such As Sketchup, Revit, 3Ds Max, Lumion, Or Equivalent, Based On The Approved 2D Architectural Drawings Provided By The Department. The 3D Modelling Will Include All External Architectural Features Such As Façade Treatment, Fenestrations, Boundary Walls, Ramps, Circulation Pathways, Parking Zones, And Access Points. The Model Shall Integrate The Approved Color Schemes, Material Finishes, Textures, And Surface Treatments, Including Elements Like Tiles, Paint, Cladding, Glass, And Roofing As Specified. Additionally, Landscape Components Such As Trees, Lawns, Water Features, Seating Arrangements, And Lighting Poles Shall Be Accurately Placed To Reflect The Design Intent. The Model Will Also Incorporate Essential Site Elements Like Roads, Footpaths, Compound Walls, Signage Boards, Gates, And Utility Areas To Present A Comprehensive Visual Representation Of The Entire Development. A Rendered Walkthrough Video Will Be Generated With A Carefully Planned Camera Path That Includes The Approach To The Site Entry, Boundary Access, Views Of Key Exterior Architectural Features, Site Landscaping, And Circulation Layout. Where Required, The Walkthrough May Also Include Transitions Into Significant Internal Spaces To Give A Holistic Understanding Of The Architectural Concept (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparation Of A High-Quality Detailed 3D Architectural Model And Rendering Of A Concept Walkthrough Video Shall Be Carried Out Using Professional Software Such As Sketchup, Revit, 3Ds Max, Lumion, Or Equivalent, Based On The Approved 2D Architectural Drawings Provided By The Department. The 3D Modelling Will Include All External Architectural Features Such As Façade Treatment, Fenestrations, Boundary Walls, Ramps, Circulation Pathways, Parking Zones, And Access Points. The Model Shall Integrate The Approved Color Schemes, Material Finishes, Textures, And Surface Treatments, Including Elements Like Tiles, Paint, Cladding, Glass, And Roofing As Specified. Additionally, Landscape Components Such As Trees, Lawns, Water Features, Seating Arrangements, And Lighting Poles Shall Be Accurately Placed To Reflect The Design Intent. The Model Will Also Incorporate Essential Site Elements Like Roads, Footpaths, Compound Walls, Signage Boards, Gates, And Utility Areas To Present A Comprehensive Visual Representation Of The Entire Development. A Rendered Walkthrough Video Will Be Generated With A Carefully Planned Camera Path That Includes The Approach To The Site Entry, Boundary Access, Views Of Key Exterior Architectural Features, Site Landscaping, And Circulation Layout. Where Required, The Walkthrough May Also Include Transitions Into Significant Internal Spaces To Give A Holistic Understanding Of The Architectural Concept (B) ≫ 2000 To 15000 Sqm, Preparation Of A High-Quality Detailed 3D Architectural Model And Rendering Of A Concept Walkthrough Video Shall Be Carried Out Using Professional Software Such As Sketchup, Revit, 3Ds Max, Lumion, Or Equivalent, Based On The Approved 2D Architectural Drawings Provided By The Department. The 3D Modelling Will Include All External Architectural Features Such As Façade Treatment, Fenestrations, Boundary Walls, Ramps, Circulation Pathways, Parking Zones, And Access Points. The Model Shall Integrate The Approved Color Schemes, Material Finishes, Textures, And Surface Treatments, Including Elements Like Tiles, Paint, Cladding, Glass, And Roofing As Specified. Additionally, Landscape Components Such As Trees, Lawns, Water Features, Seating Arrangements, And Lighting Poles Shall Be Accurately Placed To Reflect The Design Intent. The Model Will Also Incorporate Essential Site Elements Like Roads, Footpaths, Compound Walls, Signage Boards, Gates, And Utility Areas To Present A Comprehensive Visual Representation Of The Entire Development. A Rendered Walkthrough Video Will Be Generated With A Carefully Planned Camera Path That Includes The Approach To The Site Entry, Boundary Access, Views Of Key Exterior Architectural Features, Site Landscaping, And Circulation Layout. Where Required, The Walkthrough May Also Include Transitions Into Significant Internal Spaces To Give A Holistic Understanding Of The Architectural Concept (C) Upto To 2000 Sqm, Preparation Of A High-Quality Detailed 3D Architectural Model Along With A Rendered Concept Walkthrough Video With Synchronized Audio, Either With A Descriptive Narration Script Or Background Instrumental Music And Also 3D Model In Full Hd View (Rendered Images) Developed Using Professional Software Such As Sketchup, Revit, 3Ds Max, Lumion, Or Equivalent, Based On The Approved 2D Architectural Drawings Provided By The Department. The 3D Model Shall Comprehensively Represent All External Architectural Features, Including Façade Treatments, Fenestrations, Boundary Walls, Ramps, Circulation Pathways, Parking Zones, And Access Points. It Shall Incorporate Approved Color Schemes, Material Finishes, And Surface Treatments Such As Tiles, Paints, Cladding, Glass, And Roofing As Specified. Landscape Elements Including Trees, Lawns, Water Features, Seating Arrangements, And Lighting Poles Shall Be Accurately Modelled, Along With Essential Site Features Like Roads, Footpaths, Compound Walls, Gates, Signage Boards, And Utility Areas To Deliver A Complete Visual Representation Of The Proposed Development. A Professionally Rendered Walkthrough Video Shall Be Created With A Well-Defined Camera Path Covering The Site Approach, Boundary Entry, Key Architectural Elements, Landscaping Features, And Site Circulation. Where Necessary, Transitions Into Significant Interior Spaces Will Be Included To Enhance Spatial Understanding. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparation Of A High-Quality Detailed 3D Architectural Model Along With A Rendered Concept Walkthrough Video With Synchronized Audio, Either With A Descriptive Narration Script Or Background Instrumental Music And Also 3D Model In Full Hd View (Rendered Images) Developed Using Professional Software Such As Sketchup, Revit, 3Ds Max, Lumion, Or Equivalent, Based On The Approved 2D Architectural Drawings Provided By The Department. The 3D Model Shall Comprehensively Represent All External Architectural Features, Including Façade Treatments, Fenestrations, Boundary Walls, Ramps, Circulation Pathways, Parking Zones, And Access Points. It Shall Incorporate Approved Color Schemes, Material Finishes, And Surface Treatments Such As Tiles, Paints, Cladding, Glass, And Roofing As Specified. Landscape Elements Including Trees, Lawns, Water Features, Seating Arrangements, And Lighting Poles Shall Be Accurately Modelled, Along With Essential Site Features Like Roads, Footpaths, Compound Walls, Gates, Signage Boards, And Utility Areas To Deliver A Complete Visual Representation Of The Proposed Development. A Professionally Rendered Walkthrough Video Shall Be Created With A Well-Defined Camera Path Covering The Site Approach, Boundary Entry, Key Architectural Elements, Landscaping Features, And Site Circulation. Where Necessary, Transitions Into Significant Interior Spaces Will Be Included To Enhance Spatial Understanding. (B) ≫ 2000 To 15000 Sqm, Preparation Of A High-Quality Detailed 3D Architectural Model Along With A Rendered Concept Walkthrough Video With Synchronized Audio, Either With A Descriptive Narration Script Or Background Instrumental Music And Also 3D Model In Full Hd View (Rendered Images) Developed Using Professional Software Such As Sketchup, Revit, 3Ds Max, Lumion, Or Equivalent, Based On The Approved 2D Architectural Drawings Provided By The Department. The 3D Model Shall Comprehensively Represent All External Architectural Features, Including Façade Treatments, Fenestrations, Boundary Walls, Ramps, Circulation Pathways, Parking Zones, And Access Points. It Shall Incorporate Approved Color Schemes, Material Finishes, And Surface Treatments Such As Tiles, Paints, Cladding, Glass, And Roofing As Specified. Landscape Elements Including Trees, Lawns, Water Features, Seating Arrangements, And Lighting Poles Shall Be Accurately Modelled, Along With Essential Site Features Like Roads, Footpaths, Compound Walls, Gates, Signage Boards, And Utility Areas To Deliver A Complete Visual Representation Of The Proposed Development. A Professionally Rendered Walkthrough Video Shall Be Created With A Well-Defined Camera Path Covering The Site Approach, Boundary Entry, Key Architectural Elements, Landscaping Features, And Site Circulation. Where Necessary, Transitions Into Significant Interior Spaces Will Be Included To Enhance Spatial Understanding. (C) Upto To 2000 Sqm, Providing Comprehensive Interior Design Services For The Building, Including Space Planning, Material Specification, False Ceiling Design (Gypsum, Grid, Wooden, Acoustic, Etc.), Flooring Design (Vitrified, Wooden, Stone, Carpet, Epoxy, Etc.), Wall Finishes (Paint, Texture, Wallpaper, Panelling, Cladding, Etc.), Color Scheme Development, Furniture And Fixture Layout For Both Modular And Fixed Units (Workstations, Counters, Wardrobes, Partitions, Etc.), Soft Furnishings (Curtains, Blinds, Upholstery, Etc.), Lighting Layout With Ambient And Task Lighting With Site Visit, With 3 Hard Copies And Soft Copy In Autocad With Getting Approval From Competent Authority Inclusive All Revisions / Corrections For The Purpose Of Payment, Only The Built-Up Area Wherein The Planning And Designing Has Been Carried Out Shall Be Considered. (A) ≫ 15000 Sqm Upto 25000 Sqm, Providing Comprehensive Interior Design Services For The Building, Including Space Planning, Material Specification, False Ceiling Design (Gypsum, Grid, Wooden, Acoustic, Etc.), Flooring Design (Vitrified, Wooden, Stone, Carpet, Epoxy, Etc.), Wall Finishes (Paint, Texture, Wallpaper, Panelling, Cladding, Etc.), Color Scheme Development, Furniture And Fixture Layout For Both Modular And Fixed Units (Workstations, Counters, Wardrobes, Partitions, Etc.), Soft Furnishings (Curtains, Blinds, Upholstery, Etc.), Lighting Layout With Ambient And Task Lighting With Site Visit, With 3 Hard Copies And Soft Copy In Autocad With Getting Approval From Competent Authority Inclusive All Revisions / Corrections For The Purpose Of Payment, Only The Built-Up Area Wherein The Planning And Designing Has Been Carried Out Shall Be Considered. (B) ≫ 2000 To 15000 Sqm, Providing Comprehensive Interior Design Services For The Building, Including Space Planning, Material Specification, False Ceiling Design (Gypsum, Grid, Wooden, Acoustic, Etc.), Flooring Design (Vitrified, Wooden, Stone, Carpet, Epoxy, Etc.), Wall Finishes (Paint, Texture, Wallpaper, Panelling, Cladding, Etc.), Color Scheme Development, Furniture And Fixture Layout For Both Modular And Fixed Units (Workstations, Counters, Wardrobes, Partitions, Etc.), Soft Furnishings (Curtains, Blinds, Upholstery, Etc.), Lighting Layout With Ambient And Task Lighting With Site Visit, With 3 Hard Copies And Soft Copy In Autocad With Getting Approval From Competent Authority Inclusive All Revisions / Corrections For The Purpose Of Payment, Only The Built-Up Area Wherein The Planning And Designing Has Been Carried Out Shall Be Considered. (C) Upto To 2000 Sqm, Providing Comprehensive Architectural And Interior Design Services For The Building, Including Preparation Of Key Plan, Layout Plan, Site Plan, Floor Plans, Elevations, Sections, Structural Grid, Centreline Plan, Working Drawings, And All Required Details Such As Staircases, Toilet Blocks, Boundary Layout, Ramps, Parking, And Utility Allocation. The Scope Includes Taking Field Measurements, Preparing And Submitting All Drawings In Both Hard And Soft Copies (Autocad), Ensuring Compliance With Nbc, Cpwd, And Local Bye-Laws. It Also Includes The Development Of A High-Quality 3D Architectural Model Using Professional Software Such As Sketchup, Revit, 3Ds Max, Or Lumion, Incorporating All Architectural Features, Façade Treatments, Material Finishes, And Landscaping Components Like Lawns, Trees, Water Features, And Lighting. Based On The Approved 2D Drawings, Full Hd Rendered 3D Views (Interior, Exterior, And Site) Will Be Provided In Soft Copy Along With Poster-Size Prints, And A Detailed 3D Walkthrough Video Shall Be Created Showing The Overall Design Concept With Realistic Visual Context. Additionally, The Work Includes Complete Interior Design Services Covering Space Planning, Ceiling And Flooring Finishes, Wall Treatments, Color Schemes, Lighting Layouts, Furniture Design (Modular And Fixed), And Soft Furnishings, With Submission Of 3 Hard Copies And Soft Copy In Autocad, Including All Necessary Revisions As Per Directions Of The Competent Authority. This Section Includes Scope In 2+3+4+5+6. If Work Given Under This Section, The Fees For No-7 Cannot Exceed Total Fees Of 2+3+4+5+6. In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. For The Purpose Of Payment, Only The Built-Up Area Wherein The Planning And Designing Has Been Carried Out Shall Be Considered. (A) ≫ 15000 Sqm Upto 25000 Sqm, Providing Comprehensive Architectural And Interior Design Services For The Building, Including Preparation Of Key Plan, Layout Plan, Site Plan, Floor Plans, Elevations, Sections, Structural Grid, Centreline Plan, Working Drawings, And All Required Details Such As Staircases, Toilet Blocks, Boundary Layout, Ramps, Parking, And Utility Allocation. The Scope Includes Taking Field Measurements, Preparing And Submitting All Drawings In Both Hard And Soft Copies (Autocad), Ensuring Compliance With Nbc, Cpwd, And Local Bye-Laws. It Also Includes The Development Of A High-Quality 3D Architectural Model Using Professional Software Such As Sketchup, Revit, 3Ds Max, Or Lumion, Incorporating All Architectural Features, Façade Treatments, Material Finishes, And Landscaping Components Like Lawns, Trees, Water Features, And Lighting. Based On The Approved 2D Drawings, Full Hd Rendered 3D Views (Interior, Exterior, And Site) Will Be Provided In Soft Copy Along With Poster-Size Prints, And A Detailed 3D Walkthrough Video Shall Be Created Showing The Overall Design Concept With Realistic Visual Context. Additionally, The Work Includes Complete Interior Design Services Covering Space Planning, Ceiling And Flooring Finishes, Wall Treatments, Color Schemes, Lighting Layouts, Furniture Design (Modular And Fixed), And Soft Furnishings, With Submission Of 3 Hard Copies And Soft Copy In Autocad, Including All Necessary Revisions As Per Directions Of The Competent Authority. This Section Includes Scope In 2+3+4+5+6. If Work Given Under This Section, The Fees For No-7 Cannot Exceed Total Fees Of 2+3+4+5+6. In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. For The Purpose Of Payment, Only The Built-Up Area Wherein The Planning And Designing Has Been Carried Out Shall Be Considered. (B) ≫ 2000 To 15000 Sqm, Providing Comprehensive Architectural And Interior Design Services For The Building, Including Preparation Of Key Plan, Layout Plan, Site Plan, Floor Plans, Elevations, Sections, Structural Grid, Centreline Plan, Working Drawings, And All Required Details Such As Staircases, Toilet Blocks, Boundary Layout, Ramps, Parking, And Utility Allocation. The Scope Includes Taking Field Measurements, Preparing And Submitting All Drawings In Both Hard And Soft Copies (Autocad), Ensuring Compliance With Nbc, Cpwd, And Local Bye-Laws. It Also Includes The Development Of A High-Quality 3D Architectural Model Using Professional Software Such As Sketchup, Revit, 3Ds Max, Or Lumion, Incorporating All Architectural Features, Façade Treatments, Material Finishes, And Landscaping Components Like Lawns, Trees, Water Features, And Lighting. Based On The Approved 2D Drawings, Full Hd Rendered 3D Views (Interior, Exterior, And Site) Will Be Provided In Soft Copy Along With Poster-Size Prints, And A Detailed 3D Walkthrough Video Shall Be Created Showing The Overall Design Concept With Realistic Visual Context. Additionally, The Work Includes Complete Interior Design Services Covering Space Planning, Ceiling And Flooring Finishes, Wall Treatments, Color Schemes, Lighting Layouts, Furniture Design (Modular And Fixed), And Soft Furnishings, With Submission Of 3 Hard Copies And Soft Copy In Autocad, Including All Necessary Revisions As Per Directions Of The Competent Authority. This Section Includes Scope In 2+3+4+5+6. If Work Given Under This Section, The Fees For No-7 Cannot Exceed Total Fees Of 2+3+4+5+6. In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. For The Purpose Of Payment, Only The Built-Up Area Wherein The Planning And Designing Has Been Carried Out Shall Be Considered. (C) Upto To 2000 Sqm, Preparation Of Detailed Structural Design Including Structural Analysis, Design Calculations, General Arrangement Drawings, Structural Layout Plans, Elevations, Sections, Reinforcement Detailing, Bar Bending Schedules, And Any Other Required Structural Drawings Using Standard Software And As Per Relevant Is Codes And Codal Provisions If The Client Requires Proof-Checking Of The Structural Design By R&B Design Circle, Then Proof-Checking Shall Be Included In The Scope Of Services. If The Client Does Not Require Proof-Checking, No Deduction Or Adjustment In The Payment Shall Be Made On Account Of Proof-Checking. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparation Of Detailed Structural Design Including Structural Analysis, Design Calculations, General Arrangement Drawings, Structural Layout Plans, Elevations, Sections, Reinforcement Detailing, Bar Bending Schedules, And Any Other Required Structural Drawings Using Standard Software And As Per Relevant Is Codes And Codal Provisions If The Client Requires Proof-Checking Of The Structural Design By R&B Design Circle, Then Proof-Checking Shall Be Included In The Scope Of Services. If The Client Does Not Require Proof-Checking, No Deduction Or Adjustment In The Payment Shall Be Made On Account Of Proof-Checking. (B) ≫ 2000 To 15000 Sqm, Preparation Of Detailed Structural Design Including Structural Analysis, Design Calculations, General Arrangement Drawings, Structural Layout Plans, Elevations, Sections, Reinforcement Detailing, Bar Bending Schedules, And Any Other Required Structural Drawings Using Standard Software And As Per Relevant Is Codes And Codal Provisions If The Client Requires Proof-Checking Of The Structural Design By R&B Design Circle, Then Proof-Checking Shall Be Included In The Scope Of Services. If The Client Does Not Require Proof-Checking, No Deduction Or Adjustment In The Payment Shall Be Made On Account Of Proof-Checking. (C) Upto To 2000 Sqm, Providing Comprehensive Architectural, Structural And Interior Design Services For The Building, Including Preparation Of Key Plan, Layout Plan, Site Plan, Floor Plans, Elevations, Sections, Structural Grid, Centreline Plan, Working Drawings, And All Required Ancillary Details Such As Staircases, Toilet Blocks, Boundary Layout, Ramps, Parking, And Utility Allocation. The Scope Includes Field Measurements, Preparation And Submission Of All Drawings In Both Hard And Soft Copies (Autocad), Ensuring Compliance With Nbc, Cpwd, And Local Bye-Laws. Structural Design Work Includes Detailed Structural Analysis, Design Calculations, General Arrangement Drawings, Structural Layout Plans, Elevations, Sections, Reinforcement Detailing, Bar Bending Schedules, And All Required Structural Drawings Using Standard Software (Like Staad, Etabs, Etc.) And As Per Relevant Is Codes. A High-Quality 3D Architectural Model Shall Be Developed Using Professional Software Such As Sketchup, Revit, 3Ds Max, Or Lumion, Incorporating All Façade Features, Material Finishes, Landscaping Elements (Lawns, Trees, Water Bodies, Lighting, Etc.), And Site Development Components. Based On The Approved 2D Plans, Full Hd Rendered 3D Views (Interior, Exterior, And Site) Shall Be Provided In Soft Copy Along With Poster-Size Prints, And A Detailed 3D Walkthrough Video Shall Be Prepared To Visually Communicate The Overall Design Concept. Additionally, Comprehensive Interior Design Services Shall Be Provided, Covering Space Planning, Flooring And Ceiling Finishes, Wall Treatments, Color Schemes, Lighting Layouts, Furniture (Modular And Fixed), And Soft Furnishings, With Final Submission Of 3 Hard Copies And Soft Copy In Autocad Format, Incorporating All Required Revisions And Approvals From The Competent Authority. This Section Includes Scope In 2+3+4+5+6+8. If Work Given Under This Section, The Fees For No-09 Cannot Exceed Total Fees Of 2+3+4+5+6+8 In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. For The Purpose Of Payment, Only The Built-Up Area Wherein The Planning And Designing Has Been Carried Out Shall Be Considered. (A) ≫ 15000 Sqm Upto 25000 Sqm, Providing Comprehensive Architectural, Structural And Interior Design Services For The Building, Including Preparation Of Key Plan, Layout Plan, Site Plan, Floor Plans, Elevations, Sections, Structural Grid, Centreline Plan, Working Drawings, And All Required Ancillary Details Such As Staircases, Toilet Blocks, Boundary Layout, Ramps, Parking, And Utility Allocation. The Scope Includes Field Measurements, Preparation And Submission Of All Drawings In Both Hard And Soft Copies (Autocad), Ensuring Compliance With Nbc, Cpwd, And Local Bye-Laws. Structural Design Work Includes Detailed Structural Analysis, Design Calculations, General Arrangement Drawings, Structural Layout Plans, Elevations, Sections, Reinforcement Detailing, Bar Bending Schedules, And All Required Structural Drawings Using Standard Software (Like Staad, Etabs, Etc.) And As Per Relevant Is Codes. A High-Quality 3D Architectural Model Shall Be Developed Using Professional Software Such As Sketchup, Revit, 3Ds Max, Or Lumion, Incorporating All Façade Features, Material Finishes, Landscaping Elements (Lawns, Trees, Water Bodies, Lighting, Etc.), And Site Development Components. Based On The Approved 2D Plans, Full Hd Rendered 3D Views (Interior, Exterior, And Site) Shall Be Provided In Soft Copy Along With Poster-Size Prints, And A Detailed 3D Walkthrough Video Shall Be Prepared To Visually Communicate The Overall Design Concept. Additionally, Comprehensive Interior Design Services Shall Be Provided, Covering Space Planning, Flooring And Ceiling Finishes, Wall Treatments, Color Schemes, Lighting Layouts, Furniture (Modular And Fixed), And Soft Furnishings, With Final Submission Of 3 Hard Copies And Soft Copy In Autocad Format, Incorporating All Required Revisions And Approvals From The Competent Authority. This Section Includes Scope In 2+3+4+5+6+8. If Work Given Under This Section, The Fees For No-09 Cannot Exceed Total Fees Of 2+3+4+5+6+8 In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. For The Purpose Of Payment, Only The Built-Up Area Wherein The Planning And Designing Has Been Carried Out Shall Be Considered. (B) ≫ 2000 To 15000 Sqm, Providing Comprehensive Architectural, Structural And Interior Design Services For The Building, Including Preparation Of Key Plan, Layout Plan, Site Plan, Floor Plans, Elevations, Sections, Structural Grid, Centreline Plan, Working Drawings, And All Required Ancillary Details Such As Staircases, Toilet Blocks, Boundary Layout, Ramps, Parking, And Utility Allocation. The Scope Includes Field Measurements, Preparation And Submission Of All Drawings In Both Hard And Soft Copies (Autocad), Ensuring Compliance With Nbc, Cpwd, And Local Bye-Laws. Structural Design Work Includes Detailed Structural Analysis, Design Calculations, General Arrangement Drawings, Structural Layout Plans, Elevations, Sections, Reinforcement Detailing, Bar Bending Schedules, And All Required Structural Drawings Using Standard Software (Like Staad, Etabs, Etc.) And As Per Relevant Is Codes. A High-Quality 3D Architectural Model Shall Be Developed Using Professional Software Such As Sketchup, Revit, 3Ds Max, Or Lumion, Incorporating All Façade Features, Material Finishes, Landscaping Elements (Lawns, Trees, Water Bodies, Lighting, Etc.), And Site Development Components. Based On The Approved 2D Plans, Full Hd Rendered 3D Views (Interior, Exterior, And Site) Shall Be Provided In Soft Copy Along With Poster-Size Prints, And A Detailed 3D Walkthrough Video Shall Be Prepared To Visually Communicate The Overall Design Concept. Additionally, Comprehensive Interior Design Services Shall Be Provided, Covering Space Planning, Flooring And Ceiling Finishes, Wall Treatments, Color Schemes, Lighting Layouts, Furniture (Modular And Fixed), And Soft Furnishings, With Final Submission Of 3 Hard Copies And Soft Copy In Autocad Format, Incorporating All Required Revisions And Approvals From The Competent Authority. This Section Includes Scope In 2+3+4+5+6+8. If Work Given Under This Section, The Fees For No-09 Cannot Exceed Total Fees Of 2+3+4+5+6+8 In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. For The Purpose Of Payment, Only The Built-Up Area Wherein The Planning And Designing Has Been Carried Out Shall Be Considered. (C) Upto To 2000 Sqm, Proof Checking And Vetting Of Structural Design And Drawings Prepared By The Design Consultant. The Proof Checking Agency Shall Verify Design Methodology, Input Data, Analysis Models, Safety And Serviceability Criteria, Compliance With Applicable Codes, Correctness Of Reinforcement Detailing, And Adequacy Of Structural Components (A) ≫ 15000 Sqm, Proof Checking And Vetting Of Structural Design And Drawings Prepared By The Design Consultant. The Proof Checking Agency Shall Verify Design Methodology, Input Data, Analysis Models, Safety And Serviceability Criteria, Compliance With Applicable Codes, Correctness Of Reinforcement Detailing, And Adequacy Of Structural Components (B) ≫ 2000 To 15000 Sqm, Proof Checking And Vetting Of Structural Design And Drawings Prepared By The Design Consultant. The Proof Checking Agency Shall Verify Design Methodology, Input Data, Analysis Models, Safety And Serviceability Criteria, Compliance With Applicable Codes, Correctness Of Reinforcement Detailing, And Adequacy Of Structural Components (C) Upto To 2000 Sqm, Preparing And Submitting The Complete Design Of The Entire Electrical System Of Building And Lift, Including Required Site Visits, Preparation Of Final Single Line Diagram (Sld), Panel Schedules For Dbs, Mdbs And Smdbs, Detailed Load Calculations, Cable Sizing And Routing Layout, Voltage Drop And Short Circuit Calculations, Earthing And Grounding Layout, And Lightning Protection System Design. The Scope Also Includes Preparation Of Entire Internal And External Power Distribution Layouts, Lighting Layouts With Lux Level Calculations, Small Power Layouts Showing Socket And Equipment Points, Electrical Room Layouts With Switchgear And Panel Arrangements And Where Applicable, Solar Pv Layout And Yield Simulation. The Work Further Includes Liaisoning And Obtaining All Necessary Authority Approvals And Nocs From Concerned Departments, Including Load Sanction From The Utility Provider, Cei (Chief Electrical Inspector) Approval For Connected Loads Above Specified Limits, Discom Approvals, And Local Municipality Electrical Layout Approvals. Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Coordination With Authorities, And Incorporation Of All Required Revisions Or Corrections Until Final Approval Is Secured, Is Also Part Of The Scope. All Designs And Documentation Shall Comply With Relevant Is, Iec, Nbc And Other Applicable Standards, Ensuring Regulatory Compliance, Safety And Reliability. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing And Submitting The Complete Design Of The Entire Electrical System Of Building And Lift, Including Required Site Visits, Preparation Of Final Single Line Diagram (Sld), Panel Schedules For Dbs, Mdbs And Smdbs, Detailed Load Calculations, Cable Sizing And Routing Layout, Voltage Drop And Short Circuit Calculations, Earthing And Grounding Layout, And Lightning Protection System Design. The Scope Also Includes Preparation Of Entire Internal And External Power Distribution Layouts, Lighting Layouts With Lux Level Calculations, Small Power Layouts Showing Socket And Equipment Points, Electrical Room Layouts With Switchgear And Panel Arrangements And Where Applicable, Solar Pv Layout And Yield Simulation. The Work Further Includes Liaisoning And Obtaining All Necessary Authority Approvals And Nocs From Concerned Departments, Including Load Sanction From The Utility Provider, Cei (Chief Electrical Inspector) Approval For Connected Loads Above Specified Limits, Discom Approvals, And Local Municipality Electrical Layout Approvals. Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Coordination With Authorities, And Incorporation Of All Required Revisions Or Corrections Until Final Approval Is Secured, Is Also Part Of The Scope. All Designs And Documentation Shall Comply With Relevant Is, Iec, Nbc And Other Applicable Standards, Ensuring Regulatory Compliance, Safety And Reliability. (B) ≫ 2000 To 15000 Sqm, Preparing And Submitting The Complete Design Of The Entire Electrical System Of Building And Lift, Including Required Site Visits, Preparation Of Final Single Line Diagram (Sld), Panel Schedules For Dbs, Mdbs And Smdbs, Detailed Load Calculations, Cable Sizing And Routing Layout, Voltage Drop And Short Circuit Calculations, Earthing And Grounding Layout, And Lightning Protection System Design. The Scope Also Includes Preparation Of Entire Internal And External Power Distribution Layouts, Lighting Layouts With Lux Level Calculations, Small Power Layouts Showing Socket And Equipment Points, Electrical Room Layouts With Switchgear And Panel Arrangements And Where Applicable, Solar Pv Layout And Yield Simulation. The Work Further Includes Liaisoning And Obtaining All Necessary Authority Approvals And Nocs From Concerned Departments, Including Load Sanction From The Utility Provider, Cei (Chief Electrical Inspector) Approval For Connected Loads Above Specified Limits, Discom Approvals, And Local Municipality Electrical Layout Approvals. Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Coordination With Authorities, And Incorporation Of All Required Revisions Or Corrections Until Final Approval Is Secured, Is Also Part Of The Scope. All Designs And Documentation Shall Comply With Relevant Is, Iec, Nbc And Other Applicable Standards, Ensuring Regulatory Compliance, Safety And Reliability. (C) Upto To 2000 Sqm, Preparing And Submitting The Complete Design Of The Hvac (Heating, Ventilation And Air Conditioning) System, Including Necessary Site Visits And Preparation Of Detailed Ducting Layout, Hvac Load And Capacity Calculations, Ahu (Air Handling Unit) Placement, Ventilation And Fresh Air Plans, Exhaust System Design, Chilled Water/Vrf/Ductable System Layout (As Applicable), And Control System Detailing Including Bms (Building Management System) Integration. The Scope Includes Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Obtaining Approvals From The Competent Authority, And Carrying Out All Required Revisions Or Corrections Until Final Approval Is Secured. Liaisoning With Relevant Departments For Necessary Clearances Is Also Part Of The Scope. All Designs And Documentation Shall Be In Accordance With Applicable Is Codes, Ashrae Standards, Nbc Norms, And Relevant Green Building/Energy Efficiency Guidelines, Ensuring Performance, Comfort, And Regulatory Compliance. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing And Submitting The Complete Design Of The Hvac (Heating, Ventilation And Air Conditioning) System, Including Necessary Site Visits And Preparation Of Detailed Ducting Layout, Hvac Load And Capacity Calculations, Ahu (Air Handling Unit) Placement, Ventilation And Fresh Air Plans, Exhaust System Design, Chilled Water/Vrf/Ductable System Layout (As Applicable), And Control System Detailing Including Bms (Building Management System) Integration. The Scope Includes Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Obtaining Approvals From The Competent Authority, And Carrying Out All Required Revisions Or Corrections Until Final Approval Is Secured. Liaisoning With Relevant Departments For Necessary Clearances Is Also Part Of The Scope. All Designs And Documentation Shall Be In Accordance With Applicable Is Codes, Ashrae Standards, Nbc Norms, And Relevant Green Building/Energy Efficiency Guidelines, Ensuring Performance, Comfort, And Regulatory Compliance. (B) ≫ 2000 To 15000 Sqm, Preparing And Submitting The Complete Design Of The Hvac (Heating, Ventilation And Air Conditioning) System, Including Necessary Site Visits And Preparation Of Detailed Ducting Layout, Hvac Load And Capacity Calculations, Ahu (Air Handling Unit) Placement, Ventilation And Fresh Air Plans, Exhaust System Design, Chilled Water/Vrf/Ductable System Layout (As Applicable), And Control System Detailing Including Bms (Building Management System) Integration. The Scope Includes Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Obtaining Approvals From The Competent Authority, And Carrying Out All Required Revisions Or Corrections Until Final Approval Is Secured. Liaisoning With Relevant Departments For Necessary Clearances Is Also Part Of The Scope. All Designs And Documentation Shall Be In Accordance With Applicable Is Codes, Ashrae Standards, Nbc Norms, And Relevant Green Building/Energy Efficiency Guidelines, Ensuring Performance, Comfort, And Regulatory Compliance. (C) Upto To 2000 Sqm, Preparing And Submitting The Complete Design Of The Communication And Data Networking System, Including Necessary Site Visits And Preparation Of Detailed Layouts For Server Room Design, Data Cabling And Routing, Intercom System, Wi-Fi Coverage, Lan And Telecom Network Layout, Along With Integrated Planning And Design Of The Cctv Surveillance System Including Camera Placement, Coverage Analysis, Dvr/Nvr Specifications, And Cabling Requirements. The Scope Includes Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Coordination For Obtaining Approval From The Competent Authority, And Incorporating All Required Revisions Or Corrections Until Final Approval Is Secured. All Designs And Documentation Shall Comply With Relevant Is/Iec/Itu Standards And Best Industry Practices, Ensuring Complete Functionality, Security, And Scalability Of The System. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing And Submitting The Complete Design Of The Communication And Data Networking System, Including Necessary Site Visits And Preparation Of Detailed Layouts For Server Room Design, Data Cabling And Routing, Intercom System, Wi-Fi Coverage, Lan And Telecom Network Layout, Along With Integrated Planning And Design Of The Cctv Surveillance System Including Camera Placement, Coverage Analysis, Dvr/Nvr Specifications, And Cabling Requirements. The Scope Includes Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Coordination For Obtaining Approval From The Competent Authority, And Incorporating All Required Revisions Or Corrections Until Final Approval Is Secured. All Designs And Documentation Shall Comply With Relevant Is/Iec/Itu Standards And Best Industry Practices, Ensuring Complete Functionality, Security, And Scalability Of The System. (B) ≫ 2000 To 15000 Sqm, Preparing And Submitting The Complete Design Of The Communication And Data Networking System, Including Necessary Site Visits And Preparation Of Detailed Layouts For Server Room Design, Data Cabling And Routing, Intercom System, Wi-Fi Coverage, Lan And Telecom Network Layout, Along With Integrated Planning And Design Of The Cctv Surveillance System Including Camera Placement, Coverage Analysis, Dvr/Nvr Specifications, And Cabling Requirements. The Scope Includes Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Coordination For Obtaining Approval From The Competent Authority, And Incorporating All Required Revisions Or Corrections Until Final Approval Is Secured. All Designs And Documentation Shall Comply With Relevant Is/Iec/Itu Standards And Best Industry Practices, Ensuring Complete Functionality, Security, And Scalability Of The System. (C) Upto To 2000 Sqm, Preparing And Submitting, With Necessary Site Visits, The Design Of Electrical Lift, Elv, Bms, Hvac, Communication & Data Networking Systems For The Building Project. The Electrical System Layout Shall Include Single Line Diagrams, Load Calculations, Panel Schedules, Cable Routing, Lighting, And Power Socket Arrangements. The Hvac System Design Shall Include Ducting Layout, Capacity Calculations, Ahu Locations, Ventilation Plans, And Control System Detailing. The Communication And Data Networking Design Shall Include Server Room Layout, Data Routing, Intercom, Lan, Wi-Fi, Cctv And Telecom Network Layout. Additionally, The External Site Lighting Design Shall Include Pole Lights, Façade Lights, Bollards, Pathway Lighting, And Landscape Lighting, With Lux Level Calculations And Detailed Drawings Showing Fixture Locations, Cabling, And Control Systems. All Deliverables Shall Be Submitted In 3 Hard Copies And One Soft Copy In Autocad, Incorporating All Necessary Revisions/Corrections As Per Instructions And Obtaining Final Approval From The Competent Authority. This Section Includes Scope In 11+12+13 If Work Given Under This Section, The Fees For No-14 Cannot Exceed Total Fees Of 11+12+13 In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing And Submitting, With Necessary Site Visits, The Design Of Electrical Lift, Elv, Bms, Hvac, Communication & Data Networking Systems For The Building Project. The Electrical System Layout Shall Include Single Line Diagrams, Load Calculations, Panel Schedules, Cable Routing, Lighting, And Power Socket Arrangements. The Hvac System Design Shall Include Ducting Layout, Capacity Calculations, Ahu Locations, Ventilation Plans, And Control System Detailing. The Communication And Data Networking Design Shall Include Server Room Layout, Data Routing, Intercom, Lan, Wi-Fi, Cctv And Telecom Network Layout. Additionally, The External Site Lighting Design Shall Include Pole Lights, Façade Lights, Bollards, Pathway Lighting, And Landscape Lighting, With Lux Level Calculations And Detailed Drawings Showing Fixture Locations, Cabling, And Control Systems. All Deliverables Shall Be Submitted In 3 Hard Copies And One Soft Copy In Autocad, Incorporating All Necessary Revisions/Corrections As Per Instructions And Obtaining Final Approval From The Competent Authority. This Section Includes Scope In 11+12+13 If Work Given Under This Section, The Fees For No-14 Cannot Exceed Total Fees Of 11+12+13 In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. (B) ≫ 2000 To 15000 Sqm, Preparing And Submitting, With Necessary Site Visits, The Design Of Electrical Lift, Elv, Bms, Hvac, Communication & Data Networking Systems For The Building Project. The Electrical System Layout Shall Include Single Line Diagrams, Load Calculations, Panel Schedules, Cable Routing, Lighting, And Power Socket Arrangements. The Hvac System Design Shall Include Ducting Layout, Capacity Calculations, Ahu Locations, Ventilation Plans, And Control System Detailing. The Communication And Data Networking Design Shall Include Server Room Layout, Data Routing, Intercom, Lan, Wi-Fi, Cctv And Telecom Network Layout. Additionally, The External Site Lighting Design Shall Include Pole Lights, Façade Lights, Bollards, Pathway Lighting, And Landscape Lighting, With Lux Level Calculations And Detailed Drawings Showing Fixture Locations, Cabling, And Control Systems. All Deliverables Shall Be Submitted In 3 Hard Copies And One Soft Copy In Autocad, Incorporating All Necessary Revisions/Corrections As Per Instructions And Obtaining Final Approval From The Competent Authority. This Section Includes Scope In 11+12+13 If Work Given Under This Section, The Fees For No-14 Cannot Exceed Total Fees Of 11+12+13 In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. (C) Upto To 2000 Sqm, Preparing, Submitting With Site Visit And Design Of Site Lighting Design (External) Design Of External Lighting System Including Pole Lights, Façade Lights, Bollards, Pathway Lighting And Landscape Lighting With Lux Level Calculations And Drawings For Location, Cabling And Control, Incorporating All Necessary Revisions/Corrections As Per Instructions And Obtaining Final Approval From The Competent Authority. (A) ≫ 10000 Sqm Upto To 20000 Sqm, Preparing, Submitting With Site Visit And Design Of Site Lighting Design (External) Design Of External Lighting System Including Pole Lights, Façade Lights, Bollards, Pathway Lighting And Landscape Lighting With Lux Level Calculations And Drawings For Location, Cabling And Control, Incorporating All Necessary Revisions/Corrections As Per Instructions And Obtaining Final Approval From The Competent Authority. (B) ≫ 1000 To 10000 Sqm, Preparing, Submitting With Site Visit And Design Of Site Lighting Design (External) Design Of External Lighting System Including Pole Lights, Façade Lights, Bollards, Pathway Lighting And Landscape Lighting With Lux Level Calculations And Drawings For Location, Cabling And Control, Incorporating All Necessary Revisions/Corrections As Per Instructions And Obtaining Final Approval From The Competent Authority. (C) Upto To 1000 Sqm, Internal Plumbing Services The Scope Of Internal Plumbing Services Shall Cover The Comprehensive Design, Detailing, Submission And Approval Process For All Internal Services Related To Water Supply, Bath And Toilet Internal Plumbing, Terrace Connections, Downward And Upward Water Supply Line, Sanitation, Stormwater, And Recycled Water Within The Building Premises. This Includes The Internal Water Supply System Design With Pipe Sizing, Routing, Pump Selection, Storage Tanks And Demand Estimation Based On Occupancy And Usage Patterns. The Internal Sanitary And Plumbing Design Shall Encompass The Complete Drainage Layout Including Soil And Waste Pipes, Fixture Details, And Internal Manhole Connections, Along With Sizing And Routing Of Pipes. The Internal Rainwater Drainage Design Shall Include Down Take Pipes From Terraces And Balconies, Slope Planning, And Integration With Internal Recharge Or Harvesting Systems. Recycled Water Systems Shall Be Designed For Dual Piping Networks For Flushing And Landscaping, Including Pipe Sizing, Routing, And Integration With Treated Water Output From The Stp. Additionally, The Plumbing Design Shall Include Internal Connections From Toilets And Drains To The Stp, Ensuring Efficient Routing And Backflow Prevention. All Designs Shall Be Prepared In Autocad And Submitted In Three Hard Copies And One Soft Copy. The Scope Includes Conducting Required Site Visits, Incorporating All Revisions Or Corrections As Advised By The Competent Authority, And Assisting In Obtaining All Necessary Approvals From Relevant Authorities. (A) ≫ 15000 Sqm Upto 25000 Sqm, Internal Plumbing Services The Scope Of Internal Plumbing Services Shall Cover The Comprehensive Design, Detailing, Submission And Approval Process For All Internal Services Related To Water Supply, Bath And Toilet Internal Plumbing, Terrace Connections, Downward And Upward Water Supply Line, Sanitation, Stormwater, And Recycled Water Within The Building Premises. This Includes The Internal Water Supply System Design With Pipe Sizing, Routing, Pump Selection, Storage Tanks And Demand Estimation Based On Occupancy And Usage Patterns. The Internal Sanitary And Plumbing Design Shall Encompass The Complete Drainage Layout Including Soil And Waste Pipes, Fixture Details, And Internal Manhole Connections, Along With Sizing And Routing Of Pipes. The Internal Rainwater Drainage Design Shall Include Down Take Pipes From Terraces And Balconies, Slope Planning, And Integration With Internal Recharge Or Harvesting Systems. Recycled Water Systems Shall Be Designed For Dual Piping Networks For Flushing And Landscaping, Including Pipe Sizing, Routing, And Integration With Treated Water Output From The Stp. Additionally, The Plumbing Design Shall Include Internal Connections From Toilets And Drains To The Stp, Ensuring Efficient Routing And Backflow Prevention. All Designs Shall Be Prepared In Autocad And Submitted In Three Hard Copies And One Soft Copy. The Scope Includes Conducting Required Site Visits, Incorporating All Revisions Or Corrections As Advised By The Competent Authority, And Assisting In Obtaining All Necessary Approvals From Relevant Authorities. (B) ≫ 2000 To 15000 Sqm, Internal Plumbing Services The Scope Of Internal Plumbing Services Shall Cover The Comprehensive Design, Detailing, Submission And Approval Process For All Internal Services Related To Water Supply, Bath And Toilet Internal Plumbing, Terrace Connections, Downward And Upward Water Supply Line, Sanitation, Stormwater, And Recycled Water Within The Building Premises. This Includes The Internal Water Supply System Design With Pipe Sizing, Routing, Pump Selection, Storage Tanks And Demand Estimation Based On Occupancy And Usage Patterns. The Internal Sanitary And Plumbing Design Shall Encompass The Complete Drainage Layout Including Soil And Waste Pipes, Fixture Details, And Internal Manhole Connections, Along With Sizing And Routing Of Pipes. The Internal Rainwater Drainage Design Shall Include Down Take Pipes From Terraces And Balconies, Slope Planning, And Integration With Internal Recharge Or Harvesting Systems. Recycled Water Systems Shall Be Designed For Dual Piping Networks For Flushing And Landscaping, Including Pipe Sizing, Routing, And Integration With Treated Water Output From The Stp. Additionally, The Plumbing Design Shall Include Internal Connections From Toilets And Drains To The Stp, Ensuring Efficient Routing And Backflow Prevention. All Designs Shall Be Prepared In Autocad And Submitted In Three Hard Copies And One Soft Copy. The Scope Includes Conducting Required Site Visits, Incorporating All Revisions Or Corrections As Advised By The Competent Authority, And Assisting In Obtaining All Necessary Approvals From Relevant Authorities. (C) Upto To 2000 Sqm, Preparing, Submitting With Site Visit And Design Of Storm Water Including Rainwater Harvesting, Slope Planning, And Treatment Systems Of Entire Plot Area And Within Building Both With 3 Hard Copies And Soft Copy In Autocad With Getting Approval From Competent Authority Inclusive All Revisions / Corrections (A) ≫ 10000 Sqm Upto To 20000 Sqm, Preparing, Submitting With Site Visit And Design Of Storm Water Including Rainwater Harvesting, Slope Planning, And Treatment Systems Of Entire Plot Area And Within Building Both With 3 Hard Copies And Soft Copy In Autocad With Getting Approval From Competent Authority Inclusive All Revisions / Corrections (B) ≫ 1000 To 10000 Sqm, Preparing, Submitting With Site Visit And Design Of Storm Water Including Rainwater Harvesting, Slope Planning, And Treatment Systems Of Entire Plot Area And Within Building Both With 3 Hard Copies And Soft Copy In Autocad With Getting Approval From Competent Authority Inclusive All Revisions / Corrections (C) Upto To 1000 Sqm, External Utility Services The Scope Of External Utility Services Shall Involve The Design, Submission, And Coordination For All External Infrastructure Systems Serving The Project, Extending From The Boundary Of The Building To The Municipal Or Campus-Level Connections. The External Water Supply System Shall Be Designed For Routing Pipelines From Municipal Mains Or Underground Storage Tanks To Building Entries, Including Valve Chambers, Meters, And External Pumping Systems If Needed. The External Sewerage And Drainage System Shall Cover The Discharge From The Building To The Septic Tank, Soak Pit, Percolation Well, Or External Sewer Network, Including Road Crossings, Inspection Chambers, And External Manholes. The External Stormwater Drainage System Shall Be Designed To Ensure Proper Collection And Disposal Through Open Or Closed Drains, Catch Pits, Recharge Wells, And Rainwater Harvesting Structures, Along With Proper Outfall Slope Planning. For Recycled Water, The Network Shall Be Designed To Distribute Treated Stp Water To Garden Areas And External Flushing Systems, With Proper Pipe Routing, Tank Connectivity, And Tapping Points. The Firefighting System Shall Include The External Fire Ring Main, Fire Tank (If Applicable), Yard Hydrants, And Associated Infrastructure Such As Valve Chambers And Access Paths For Fire Tenders. All Drawings And Design Documentation Shall Be Prepared In Autocad And Submitted In Three Hard Copies And One Soft Copy. The Scope Also Includes Necessary Site Visits, Coordination With Concerned Authorities, Incorporation Of All Revisions, And Obtaining Design Approvals From The Competent Authority. Including Design Of Storm Water Including Rainwater Harvesting, Slope Planning, And Treatment Systems Of Entire Plot Area And Within Building Both. (A) ≫ 10000 Sqm Upto To 20000 Sqm, External Utility Services The Scope Of External Utility Services Shall Involve The Design, Submission, And Coordination For All External Infrastructure Systems Serving The Project, Extending From The Boundary Of The Building To The Municipal Or Campus-Level Connections. The External Water Supply System Shall Be Designed For Routing Pipelines From Municipal Mains Or Underground Storage Tanks To Building Entries, Including Valve Chambers, Meters, And External Pumping Systems If Needed. The External Sewerage And Drainage System Shall Cover The Discharge From The Building To The Septic Tank, Soak Pit, Percolation Well, Or External Sewer Network, Including Road Crossings, Inspection Chambers, And External Manholes. The External Stormwater Drainage System Shall Be Designed To Ensure Proper Collection And Disposal Through Open Or Closed Drains, Catch Pits, Recharge Wells, And Rainwater Harvesting Structures, Along With Proper Outfall Slope Planning. For Recycled Water, The Network Shall Be Designed To Distribute Treated Stp Water To Garden Areas And External Flushing Systems, With Proper Pipe Routing, Tank Connectivity, And Tapping Points. The Firefighting System Shall Include The External Fire Ring Main, Fire Tank (If Applicable), Yard Hydrants, And Associated Infrastructure Such As Valve Chambers And Access Paths For Fire Tenders. All Drawings And Design Documentation Shall Be Prepared In Autocad And Submitted In Three Hard Copies And One Soft Copy. The Scope Also Includes Necessary Site Visits, Coordination With Concerned Authorities, Incorporation Of All Revisions, And Obtaining Design Approvals From The Competent Authority. Including Design Of Storm Water Including Rainwater Harvesting, Slope Planning, And Treatment Systems Of Entire Plot Area And Within Building Both. (B) ≫ 1000 To 10000 Sqm, External Utility Services The Scope Of External Utility Services Shall Involve The Design, Submission, And Coordination For All External Infrastructure Systems Serving The Project, Extending From The Boundary Of The Building To The Municipal Or Campus-Level Connections. The External Water Supply System Shall Be Designed For Routing Pipelines From Municipal Mains Or Underground Storage Tanks To Building Entries, Including Valve Chambers, Meters, And External Pumping Systems If Needed. The External Sewerage And Drainage System Shall Cover The Discharge From The Building To The Septic Tank, Soak Pit, Percolation Well, Or External Sewer Network, Including Road Crossings, Inspection Chambers, And External Manholes. The External Stormwater Drainage System Shall Be Designed To Ensure Proper Collection And Disposal Through Open Or Closed Drains, Catch Pits, Recharge Wells, And Rainwater Harvesting Structures, Along With Proper Outfall Slope Planning. For Recycled Water, The Network Shall Be Designed To Distribute Treated Stp Water To Garden Areas And External Flushing Systems, With Proper Pipe Routing, Tank Connectivity, And Tapping Points. The Firefighting System Shall Include The External Fire Ring Main, Fire Tank (If Applicable), Yard Hydrants, And Associated Infrastructure Such As Valve Chambers And Access Paths For Fire Tenders. All Drawings And Design Documentation Shall Be Prepared In Autocad And Submitted In Three Hard Copies And One Soft Copy. The Scope Also Includes Necessary Site Visits, Coordination With Concerned Authorities, Incorporation Of All Revisions, And Obtaining Design Approvals From The Competent Authority. Including Design Of Storm Water Including Rainwater Harvesting, Slope Planning, And Treatment Systems Of Entire Plot Area And Within Building Both. (C) Upto To 1000 Sqm, Preparing And Submitting The Complete Design Of The Fire Detection And Fire Protection System, Including Necessary Site Visits And Preparation Of Detailed Layouts For Fire Hydrant Systems, Sprinkler Systems, Fire Alarm And Detection Panels, Alarm Systems, Evacuation Route Plans, Emergency Lighting Layout, And Power Backup Single Line Diagram (Sld) To Ensure Uninterrupted Operation During Emergencies. The Scope Also Includes Preparation Of Fire Alarm Layout Integrated With Detection Systems And Emergency Response Features. The Work Involves Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Obtaining Necessary Fire Safety Noc And Approvals From The Competent Authority, Including Liaisoning With The Concerned Fire Department And Electrical Authorities For Noc Related To Fire Alarm Systems And Emergency Power Backup. All Revisions And Corrections Suggested By The Authorities Shall Be Incorporated Until Final Approval Is Granted. The Entire Design Shall Be In Compliance With Relevant Nbc, Is Standards, And Local Fire Safety Norms, Ensuring Safety, Functionality, And Statutory Conformity. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing And Submitting The Complete Design Of The Fire Detection And Fire Protection System, Including Necessary Site Visits And Preparation Of Detailed Layouts For Fire Hydrant Systems, Sprinkler Systems, Fire Alarm And Detection Panels, Alarm Systems, Evacuation Route Plans, Emergency Lighting Layout, And Power Backup Single Line Diagram (Sld) To Ensure Uninterrupted Operation During Emergencies. The Scope Also Includes Preparation Of Fire Alarm Layout Integrated With Detection Systems And Emergency Response Features. The Work Involves Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Obtaining Necessary Fire Safety Noc And Approvals From The Competent Authority, Including Liaisoning With The Concerned Fire Department And Electrical Authorities For Noc Related To Fire Alarm Systems And Emergency Power Backup. All Revisions And Corrections Suggested By The Authorities Shall Be Incorporated Until Final Approval Is Granted. The Entire Design Shall Be In Compliance With Relevant Nbc, Is Standards, And Local Fire Safety Norms, Ensuring Safety, Functionality, And Statutory Conformity. (B) ≫ 2000 To 15000 Sqm, Preparing And Submitting The Complete Design Of The Fire Detection And Fire Protection System, Including Necessary Site Visits And Preparation Of Detailed Layouts For Fire Hydrant Systems, Sprinkler Systems, Fire Alarm And Detection Panels, Alarm Systems, Evacuation Route Plans, Emergency Lighting Layout, And Power Backup Single Line Diagram (Sld) To Ensure Uninterrupted Operation During Emergencies. The Scope Also Includes Preparation Of Fire Alarm Layout Integrated With Detection Systems And Emergency Response Features. The Work Involves Submission Of Three Hard Copies And One Soft Copy In Autocad Format, Obtaining Necessary Fire Safety Noc And Approvals From The Competent Authority, Including Liaisoning With The Concerned Fire Department And Electrical Authorities For Noc Related To Fire Alarm Systems And Emergency Power Backup. All Revisions And Corrections Suggested By The Authorities Shall Be Incorporated Until Final Approval Is Granted. The Entire Design Shall Be In Compliance With Relevant Nbc, Is Standards, And Local Fire Safety Norms, Ensuring Safety, Functionality, And Statutory Conformity. (C) Upto To 2000 Sqm, Preparing, Submitting (With Site Visit) And Design Of Roads And Walkways, Including Planning And Design Of Internal Roads, Pedestrian Walkways, And Footpaths With Geometric Layout, Pavement Design, Drainage Provisions, And Junctions, Along With Proper Slope, Signage Along With Plinth Level Recommendations. (A) ≫ 10000 Sqm Upto To 20000 Sqm, Preparing, Submitting (With Site Visit) And Design Of Roads And Walkways, Including Planning And Design Of Internal Roads, Pedestrian Walkways, And Footpaths With Geometric Layout, Pavement Design, Drainage Provisions, And Junctions, Along With Proper Slope, Signage Along With Plinth Level Recommendations. (B) ≫ 1000 To 10000 Sqm, Preparing, Submitting (With Site Visit) And Design Of Roads And Walkways, Including Planning And Design Of Internal Roads, Pedestrian Walkways, And Footpaths With Geometric Layout, Pavement Design, Drainage Provisions, And Junctions, Along With Proper Slope, Signage Along With Plinth Level Recommendations. (C) Upto To 1000 Sqm, Preparing, Submitting With Site Visit And Landscaping Design Preparation Of Softscape And Hardscape Landscape Design Including Plantation Layout, Lawns, Pavers, Seating Areas, Irrigation System Layout, And Lighting, Enhancing Site Aesthetics And Environmental Value. (A) ≫ 10000 Sqm Upto 20000 Sqm, Preparing, Submitting With Site Visit And Landscaping Design Preparation Of Softscape And Hardscape Landscape Design Including Plantation Layout, Lawns, Pavers, Seating Areas, Irrigation System Layout, And Lighting, Enhancing Site Aesthetics And Environmental Value. (B) ≫ 1000 To 10000 Sqm, Preparing, Submitting With Site Visit And Landscaping Design Preparation Of Softscape And Hardscape Landscape Design Including Plantation Layout, Lawns, Pavers, Seating Areas, Irrigation System Layout, And Lighting, Enhancing Site Aesthetics And Environmental Value. (C) Upto To 1000 Sqm, Preparing Detailed Cost Estimate For The New Construction Of Buildings, Limited To Civil Components (Excluding Architectural Design, Structural Design, Interior Design, Mep Services, Fire Safety Design, And Landscaping Design). The Scope Shall Include Preparation Of Comprehensive Item-Wise Quantity Take-Offs From Approved Drawings, Detailed Rate Analysis Using Current Sor And Market Rates (Where Sor Is Not Available), Incorporating All Civil And Infrastructure Components Such As Site Development, Earthwork, Substructure, Superstructure, Doors & Windows, Flooring, Roofing, Sanitary Fittings, Water Supply & Drainage Works, External Development, Roads, Walkways, Compound Walls, Etc. Complete As Per Instructions Of The Engineer-In-Charge. Consultant Shall Also Prepare Scrutiny Estimates For Submission To The Sanctioning Authority And Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing Detailed Cost Estimate For The New Construction Of Buildings, Limited To Civil Components (Excluding Architectural Design, Structural Design, Interior Design, Mep Services, Fire Safety Design, And Landscaping Design). The Scope Shall Include Preparation Of Comprehensive Item-Wise Quantity Take-Offs From Approved Drawings, Detailed Rate Analysis Using Current Sor And Market Rates (Where Sor Is Not Available), Incorporating All Civil And Infrastructure Components Such As Site Development, Earthwork, Substructure, Superstructure, Doors & Windows, Flooring, Roofing, Sanitary Fittings, Water Supply & Drainage Works, External Development, Roads, Walkways, Compound Walls, Etc. Complete As Per Instructions Of The Engineer-In-Charge. Consultant Shall Also Prepare Scrutiny Estimates For Submission To The Sanctioning Authority And Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (B) ≫ 2000 To 15000 Sqm, Preparing Detailed Cost Estimate For The New Construction Of Buildings, Limited To Civil Components (Excluding Architectural Design, Structural Design, Interior Design, Mep Services, Fire Safety Design, And Landscaping Design). The Scope Shall Include Preparation Of Comprehensive Item-Wise Quantity Take-Offs From Approved Drawings, Detailed Rate Analysis Using Current Sor And Market Rates (Where Sor Is Not Available), Incorporating All Civil And Infrastructure Components Such As Site Development, Earthwork, Substructure, Superstructure, Doors & Windows, Flooring, Roofing, Sanitary Fittings, Water Supply & Drainage Works, External Development, Roads, Walkways, Compound Walls, Etc. Complete As Per Instructions Of The Engineer-In-Charge. Consultant Shall Also Prepare Scrutiny Estimates For Submission To The Sanctioning Authority And Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (C) Upto To 2000 Sqm, Preparing Detailed Cost Estimate For Electrical Work In The Building, Including Internal Electrification, Cabling, Wiring, Lighting, Power Distribution, Earthing, Lightning Protection, Panels, Switchgear, Dg Sets, Solar Power Systems, And Allied Works, Strictly Based On Approved Drawings And As Per Relevant Codes. Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Sanction Authority Shall Be Prepared To Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing Detailed Cost Estimate For Electrical Work In The Building, Including Internal Electrification, Cabling, Wiring, Lighting, Power Distribution, Earthing, Lightning Protection, Panels, Switchgear, Dg Sets, Solar Power Systems, And Allied Works, Strictly Based On Approved Drawings And As Per Relevant Codes. Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Sanction Authority Shall Be Prepared To Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (B) ≫ 2000 To 15000 Sqm, Preparing Detailed Cost Estimate For Electrical Work In The Building, Including Internal Electrification, Cabling, Wiring, Lighting, Power Distribution, Earthing, Lightning Protection, Panels, Switchgear, Dg Sets, Solar Power Systems, And Allied Works, Strictly Based On Approved Drawings And As Per Relevant Codes. Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Sanction Authority Shall Be Prepared To Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (C) Upto To 2000 Sqm, Preparing Detailed Cost Estimate For Furniture And Interior Works, Including Modular Furniture, Storage Systems, Partitions, False Ceiling, Wall Panelling, Flooring Finishes, Interior Fixtures, Blinds/Curtains, Signage, And Other Interior Components As Per Approved Drawings. Consultant Shall Prepare Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Submission And Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing Detailed Cost Estimate For Furniture And Interior Works, Including Modular Furniture, Storage Systems, Partitions, False Ceiling, Wall Panelling, Flooring Finishes, Interior Fixtures, Blinds/Curtains, Signage, And Other Interior Components As Per Approved Drawings. Consultant Shall Prepare Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Submission And Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature (B) ≫ 2000 To 15000 Sqm, Preparing Detailed Cost Estimate For Furniture And Interior Works, Including Modular Furniture, Storage Systems, Partitions, False Ceiling, Wall Panelling, Flooring Finishes, Interior Fixtures, Blinds/Curtains, Signage, And Other Interior Components As Per Approved Drawings. Consultant Shall Prepare Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Submission And Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature (C) Upto To 2000 Sqm, Preparing Detailed Cost Estimate For Fire Detection, Fire Suppression, Hydrant Systems, Sprinkler Systems, Fire Extinguishers, Fire Pumps, Fire Water Tanks, Control Panels, And Related Equipment As Per Nbc/Is Standards And Approved Drawings. Consultant Shall Prepare Item-Wise Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Submission To The Sanctioning Authority To Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing Detailed Cost Estimate For Fire Detection, Fire Suppression, Hydrant Systems, Sprinkler Systems, Fire Extinguishers, Fire Pumps, Fire Water Tanks, Control Panels, And Related Equipment As Per Nbc/Is Standards And Approved Drawings. Consultant Shall Prepare Item-Wise Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Submission To The Sanctioning Authority To Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (B) ≫ 2000 To 15000 Sqm, Preparing Detailed Cost Estimate For Fire Detection, Fire Suppression, Hydrant Systems, Sprinkler Systems, Fire Extinguishers, Fire Pumps, Fire Water Tanks, Control Panels, And Related Equipment As Per Nbc/Is Standards And Approved Drawings. Consultant Shall Prepare Item-Wise Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Submission To The Sanctioning Authority To Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (C) Upto To 2000 Sqm, Preparing Detailed Cost Estimate For Campus-Level Development Works Including Gardening, Landscaping, Water Harvesting, Compound Wall, Wire Fencing, External Water Supply, Bore And Pump Room, Beautification, Rooftop Solar Panel, Internal Roads, Walkways, Drainage Systems, Stormwater Management, Landscaping (Excluding Design), Campus Lighting, Boundary Walls, Gates, Guard Rooms, Open Spaces, Parking Areas, Signage, And All External Services As Per Approved Master Plan/Drawings. Consultant Shall Prepare Item-Wise Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), Scrutiny Estimates, And Obtain Technical Sanction From The Competent Authority. In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (A) ≫ 10000 Sqm Upto To 20000 Sqm, Preparing Detailed Cost Estimate For Campus-Level Development Works Including Gardening, Landscaping, Water Harvesting, Compound Wall, Wire Fencing, External Water Supply, Bore And Pump Room, Beautification, Rooftop Solar Panel, Internal Roads, Walkways, Drainage Systems, Stormwater Management, Landscaping (Excluding Design), Campus Lighting, Boundary Walls, Gates, Guard Rooms, Open Spaces, Parking Areas, Signage, And All External Services As Per Approved Master Plan/Drawings. Consultant Shall Prepare Item-Wise Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), Scrutiny Estimates, And Obtain Technical Sanction From The Competent Authority. In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (B) ≫ 1000 To 10000 Sqm, Preparing Detailed Cost Estimate For Campus-Level Development Works Including Gardening, Landscaping, Water Harvesting, Compound Wall, Wire Fencing, External Water Supply, Bore And Pump Room, Beautification, Rooftop Solar Panel, Internal Roads, Walkways, Drainage Systems, Stormwater Management, Landscaping (Excluding Design), Campus Lighting, Boundary Walls, Gates, Guard Rooms, Open Spaces, Parking Areas, Signage, And All External Services As Per Approved Master Plan/Drawings. Consultant Shall Prepare Item-Wise Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), Scrutiny Estimates, And Obtain Technical Sanction From The Competent Authority. In Case This Item Has Been Executed Only In Part, No Deduction Shall Be Made From The Payment For This Item. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (C) Upto To 1000 Sqm, Preparation Of Detailed Cost Estimate For External Electrification Supply, Including Coordination With Geb/Torrent Power For Obtaining Power Connection, And Incorporating Provisions For Transformer, Sub-Station, Associated Ht/Lt Works, Cabling, Panels, Protection System, And Allied Infrastructure As Per Applicable Standards And Requirements. Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Sanction Authority Shall Be Prepared To Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparation Of Detailed Cost Estimate For External Electrification Supply, Including Coordination With Geb/Torrent Power For Obtaining Power Connection, And Incorporating Provisions For Transformer, Sub-Station, Associated Ht/Lt Works, Cabling, Panels, Protection System, And Allied Infrastructure As Per Applicable Standards And Requirements. Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Sanction Authority Shall Be Prepared To Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (B) ≫ 2000 To 15000 Sqm, Preparation Of Detailed Cost Estimate For External Electrification Supply, Including Coordination With Geb/Torrent Power For Obtaining Power Connection, And Incorporating Provisions For Transformer, Sub-Station, Associated Ht/Lt Works, Cabling, Panels, Protection System, And Allied Infrastructure As Per Applicable Standards And Requirements. Quantity Take-Offs, Detailed Rate Analysis With Current Sor/Market Rates (Where Sor Not Available), And Scrutiny Estimates For Sanction Authority Shall Be Prepared To Obtain Technical Sanction. The Consultant Must Sign And Seal The Boq/Estimate Prepared Report Along With The Team Leader’S Signature. (C) Upto To 2000 Sqm, Preparing Dtp/Rfp For Work As Per T.S. Estimate For Percentage Rate, Item Rate As Well As Sbd/Epc Tender. (The Consultant Shall Submit Schedule-A, Schedule-B, Specification, Specification Index, Cement Consumption Statement, Calculation Of Components Of The Work (P.O.L.)) For Building Etc. (A) ≫ 50 Cr (Dtp Amount), Preparing Dtp/Rfp For Work As Per T.S. Estimate For Percentage Rate, Item Rate As Well As Sbd/Epc Tender. (The Consultant Shall Submit Schedule-A, Schedule-B, Specification, Specification Index, Cement Consumption Statement, Calculation Of Components Of The Work (P.O.L.)) For Building Etc. (B) ≫ 7.5 Cr To 50 Cr (Dtp Amount), Preparing Dtp/Rfp For Work As Per T.S. Estimate For Percentage Rate, Item Rate As Well As Sbd/Epc Tender. (The Consultant Shall Submit Schedule-A, Schedule-B, Specification, Specification Index, Cement Consumption Statement, Calculation Of Components Of The Work (P.O.L.)) For Building Etc. (C) Upto To 7.5 Cr (Dtp Amount), Repairing / Renovation Phase The Architectural Audit (Including Visual Inspection And Detailed Inspection) Shall Focus On Evaluating The Design Efficiency, Usability, And Code Compliance Of The Building Layout And Spaces. It Will Include Verification Of Functional Zoning, Space Utilization, Circulation Patterns, And Conformance With The Approved Architectural Drawings. The Assessment Shall Examine Universal Accessibility Features Such As Ramps, Elevators, Signage, And Tactile Indicators To Ensure Inclusivity. Safety Aspects Like Corridor Widths, Fire Exits, And Staircases Will Be Audited For Regulatory Compliance. Finishes Such As Flooring, Walls, Ceilings, Doors, Windows, And Built-In Furniture Will Be Examined For Physical Condition And Maintenance Needs. Deviations From The Original Design, Poor Workmanship, And Aging Components Will Be Documented To Support Long-Term Refurbishment Planning. In Addition, The Consultant Shall Also Verify Compliance With The Harmonious Guidelines, Guidelines For Persons With Disabilities (Pwd), And Any Latest National Or International Guidelines, Codes, Or Standards Issued By Government Bodies Or Recognized Authorities Relevant To Accessibility, Safety, And Universal Design, Ensuring The Project Aligns With Best Practices And Statutory Requirements. (A) ≫ 15000 Sqm Upto 25000 Sqm, Repairing / Renovation Phase The Architectural Audit (Including Visual Inspection And Detailed Inspection) Shall Focus On Evaluating The Design Efficiency, Usability, And Code Compliance Of The Building Layout And Spaces. It Will Include Verification Of Functional Zoning, Space Utilization, Circulation Patterns, And Conformance With The Approved Architectural Drawings. The Assessment Shall Examine Universal Accessibility Features Such As Ramps, Elevators, Signage, And Tactile Indicators To Ensure Inclusivity. Safety Aspects Like Corridor Widths, Fire Exits, And Staircases Will Be Audited For Regulatory Compliance. Finishes Such As Flooring, Walls, Ceilings, Doors, Windows, And Built-In Furniture Will Be Examined For Physical Condition And Maintenance Needs. Deviations From The Original Design, Poor Workmanship, And Aging Components Will Be Documented To Support Long-Term Refurbishment Planning. In Addition, The Consultant Shall Also Verify Compliance With The Harmonious Guidelines, Guidelines For Persons With Disabilities (Pwd), And Any Latest National Or International Guidelines, Codes, Or Standards Issued By Government Bodies Or Recognized Authorities Relevant To Accessibility, Safety, And Universal Design, Ensuring The Project Aligns With Best Practices And Statutory Requirements. (B) ≫ 2000 To 15000 Sqm, Repairing / Renovation Phase The Architectural Audit (Including Visual Inspection And Detailed Inspection) Shall Focus On Evaluating The Design Efficiency, Usability, And Code Compliance Of The Building Layout And Spaces. It Will Include Verification Of Functional Zoning, Space Utilization, Circulation Patterns, And Conformance With The Approved Architectural Drawings. The Assessment Shall Examine Universal Accessibility Features Such As Ramps, Elevators, Signage, And Tactile Indicators To Ensure Inclusivity. Safety Aspects Like Corridor Widths, Fire Exits, And Staircases Will Be Audited For Regulatory Compliance. Finishes Such As Flooring, Walls, Ceilings, Doors, Windows, And Built-In Furniture Will Be Examined For Physical Condition And Maintenance Needs. Deviations From The Original Design, Poor Workmanship, And Aging Components Will Be Documented To Support Long-Term Refurbishment Planning. In Addition, The Consultant Shall Also Verify Compliance With The Harmonious Guidelines, Guidelines For Persons With Disabilities (Pwd), And Any Latest National Or International Guidelines, Codes, Or Standards Issued By Government Bodies Or Recognized Authorities Relevant To Accessibility, Safety, And Universal Design, Ensuring The Project Aligns With Best Practices And Statutory Requirements. (C) Upto To 2000 Sqm, Preparing Detailed Cost Estimate For The Estimates For The Retrofitting / Renovation/ Repairing / Addition / Alteration Of Existing Building Of Any Building (Excluding Architectural Design, Structural Design, Interior Design, Mep Services, Fire Safety Design, And Landscaping Design), Including The Preparation Of Comprehensive Item-Wise Quantity Take-Offs From Approved Drawings, Detailed Rate Analysis Using Current Sor And Market Rates (Where Sor Is Not Available), Incorporating All Civil And Infrastructure Components Such As Site Development, Earthwork, Substructure, Superstructure, Doors & Windows, Flooring, Roofing, Sanitary Fittings, Water Supply & Drainage Works, External Development, Roads, Walkways, Compound Walls, Etc. Etc. Complete As Per Instruction Of Engineer In Charge And Scrutiny Estimate From Sanction Authority And Get Technical Sanction. (A) ≫ 15000 Sqm Upto 25000 Sqm, Preparing Detailed Cost Estimate For The Estimates For The Retrofitting / Renovation/ Repairing / Addition / Alteration Of Existing Building Of Any Building (Excluding Architectural Design, Structural Design, Interior Design, Mep Services, Fire Safety Design, And Landscaping Design), Including The Preparation Of Comprehensive Item-Wise Quantity Take-Offs From Approved Drawings, Detailed Rate Analysis Using Current Sor And Market Rates (Where Sor Is Not Available), Incorporating All Civil And Infrastructure Components Such As Site Development, Earthwork, Substructure, Superstructure, Doors & Windows, Flooring, Roofing, Sanitary Fittings, Water Supply & Drainage Works, External Development, Roads, Walkways, Compound Walls, Etc. Etc. Complete As Per Instruction Of Engineer In Charge And Scrutiny Estimate From Sanction Authority And Get Technical Sanction. (B) ≫ 2000 To 15000 Sqm, Preparing Detailed Cost Estimate For The Estimates For The Retrofitting / Renovation/ Repairing / Addition / Alteration Of Existing Building Of Any Building (Excluding Architectural Design, Structural Design, Interior Design, Mep Services, Fire Safety Design, And Landscaping Design), Including The Preparation Of Comprehensive Item-Wise Quantity Take-Offs From Approved Drawings, Detailed Rate Analysis Using Current Sor And Market Rates (Where Sor Is Not Available), Incorporating All Civil And Infrastructure Components Such As Site Development, Earthwork, Substructure, Superstructure, Doors & Windows, Flooring, Roofing, Sanitary Fittings, Water Supply & Drainage Works, External Development, Roads, Walkways, Compound Walls, Etc. Etc. Complete As Per Instruction Of Engineer In Charge And Scrutiny Estimate From Sanction Authority And Get Technical Sanction. (C) Upto To 2000 Sqm, Existing Building Detailing Phase Carrying Out The Preparation Of Detailed As-Built Drawings For The Campus Area Excluding Building Footprints, Which Includes Site Visits, Physical Measurements, Verification Of Existing Layouts, And Collection Of All Relevant Technical Data From The Site. The Scope Shall Cover All Existing Infrastructure Elements Such As Internal Roads, Walkways, Boundary/Compound Walls, Gates, Security Cabins, Parking Areas, Water Tanks, Landscaping Features, Electrical Poles, External Lighting Layout, Signages, Drainage Networks, Water Supply Pipelines, Sewer Lines, Utility Ducts, Open Grounds, Paved/Unpaved Areas, Etc. All Measurements Shall Be Taken Accurately Using Total Station, Laser Distance Meters, Or Conventional Methods As Applicable, And Documented In Field Registers. Based On These, Scaled As-Built Drawings Shall Be Prepared In Autocad Including Plans, Levels, And Service Layouts, Duly Incorporating All Existing Dimensions, Site Features, And Notations. Deliverables Shall Include Soft Copies In .Dwg And .Pdf Formats, And Hard Copies (Printed On A1 Sheets In 3 Sets) As Per Departmental Requirements. All Work Shall Be Completed As Per The Instructions Of The Engineer-In-Charge And Shall Adhere To The Standard Drafting Conventions And Title Block Formats Of The Department. (A) ≫ 10000 Sqm Upto To 20000 Sqm, Existing Building Detailing Phase Carrying Out The Preparation Of Detailed As-Built Drawings For The Campus Area Excluding Building Footprints, Which Includes Site Visits, Physical Measurements, Verification Of Existing Layouts, And Collection Of All Relevant Technical Data From The Site. The Scope Shall Cover All Existing Infrastructure Elements Such As Internal Roads, Walkways, Boundary/Compound Walls, Gates, Security Cabins, Parking Areas, Water Tanks, Landscaping Features, Electrical Poles, External Lighting Layout, Signages, Drainage Networks, Water Supply Pipelines, Sewer Lines, Utility Ducts, Open Grounds, Paved/Unpaved Areas, Etc. All Measurements Shall Be Taken Accurately Using Total Station, Laser Distance Meters, Or Conventional Methods As Applicable, And Documented In Field Registers. Based On These, Scaled As-Built Drawings Shall Be Prepared In Autocad Including Plans, Levels, And Service Layouts, Duly Incorporating All Existing Dimensions, Site Features, And Notations. Deliverables Shall Include Soft Copies In .Dwg And .Pdf Formats, And Hard Copies (Printed On A1 Sheets In 3 Sets) As Per Departmental Requirements. All Work Shall Be Completed As Per The Instructions Of The Engineer-In-Charge And Shall Adhere To The Standard Drafting Conventions And Title Block Formats Of The Department. (B) ≫ 1000 To 10000 Sqm, Existing Building Detailing Phase Carrying Out The Preparation Of Detailed As-Built Drawings For The Campus Area Excluding Building Footprints, Which Includes Site Visits, Physical Measurements, Verification Of Existing Layouts, And Collection Of All Relevant Technical Data From The Site. The Scope Shall Cover All Existing Infrastructure Elements Such As Internal Roads, Walkways, Boundary/Compound Walls, Gates, Security Cabins, Parking Areas, Water Tanks, Landscaping Features, Electrical Poles, External Lighting Layout, Signages, Drainage Networks, Water Supply Pipelines, Sewer Lines, Utility Ducts, Open Grounds, Paved/Unpaved Areas, Etc. All Measurements Shall Be Taken Accurately Using Total Station, Laser Distance Meters, Or Conventional Methods As Applicable, And Documented In Field Registers. Based On These, Scaled As-Built Drawings Shall Be Prepared In Autocad Including Plans, Levels, And Service Layouts, Duly Incorporating All Existing Dimensions, Site Features, And Notations. Deliverables Shall Include Soft Copies In .Dwg And .Pdf Formats, And Hard Copies (Printed On A1 Sheets In 3 Sets) As Per Departmental Requirements. All Work Shall Be Completed As Per The Instructions Of The Engineer-In-Charge And Shall Adhere To The Standard Drafting Conventions And Title Block Formats Of The Department. (C) Upto To 1000 Sqm, Carrying Out The Preparation Of Detailed As-Built Drawings For Existing Building’S Only Visible Elements, Which Includes Physical Verification And Measurement Of All Components Of The Building Structures As Per Actual Site Conditions. The Scope Includes Taking Comprehensive Measurements Of The Floor Plans, Elevations, Sections, Staircases, Doors, Windows, Roof Profiles, Internal Room Dimensions, Service Shafts, Toilets, Plumbing Points, Electrical Layout (Conduits, Switches, Sockets, Dbs), Ducts, And Any Architectural Features, Including Parapet Walls, Projections, And Structural Elements Such As Beams, Columns, Slabs, Etc. Work Includes Documenting Existing Civil, Plumbing, And Electrical Services To The Extent Visible And Accessible. Deliverables Shall Include Soft Copies In .Dwg And .Pdf Formats, And Hard Copies (Printed On A1 Sheets In 3 Sets) As Per Departmental Requirements. All Work Shall Be Completed As Per The Instructions Of The Engineer-In-Charge And Shall Adhere To The Standard Drafting Conventions And Title Block Formats Of The Department. (A) ≫ 15000 Sqm Upto 25000 Sqm, Carrying Out The Preparation Of Detailed As-Built Drawings For Existing Building’S Only Visible Elements, Which Includes Physical Verification And Measurement Of All Components Of The Building Structures As Per Actual Site Conditions. The Scope Includes Taking Comprehensive Measurements Of The Floor Plans, Elevations, Sections, Staircases, Doors, Windows, Roof Profiles, Internal Room Dimensions, Service Shafts, Toilets, Plumbing Points, Electrical Layout (Conduits, Switches, Sockets, Dbs), Ducts, And Any Architectural Features, Including Parapet Walls, Projections, And Structural Elements Such As Beams, Columns, Slabs, Etc. Work Includes Documenting Existing Civil, Plumbing, And Electrical Services To The Extent Visible And Accessible. Deliverables Shall Include Soft Copies In .Dwg And .Pdf Formats, And Hard Copies (Printed On A1 Sheets In 3 Sets) As Per Departmental Requirements. All Work Shall Be Completed As Per The Instructions Of The Engineer-In-Charge And Shall Adhere To The Standard Drafting Conventions And Title Block Formats Of The Department. (B) ≫ 2000 To 15000 Sqm, Carrying Out The Preparation Of Detailed As-Built Drawings For Existing Building’S Only Visible Elements, Which Includes Physical Verification And Measurement Of All Components Of The Building Structures As Per Actual Site Conditions. The Scope Includes Taking Comprehensive Measurements Of The Floor Plans, Elevations, Sections, Staircases, Doors, Windows, Roof Profiles, Internal Room Dimensions, Service Shafts, Toilets, Plumbing Points, Electrical Layout (Conduits, Switches, Sockets, Dbs), Ducts, And Any Architectural Features, Including Parapet Walls, Projections, And Structural Elements Such As Beams, Columns, Slabs, Etc. Work Includes Documenting Existing Civil, Plumbing, And Electrical Services To The Extent Visible And Accessible. Deliverables Shall Include Soft Copies In .Dwg And .Pdf Formats, And Hard Copies (Printed On A1 Sheets In 3 Sets) As Per Departmental Requirements. All Work Shall Be Completed As Per The Instructions Of The Engineer-In-Charge And Shall Adhere To The Standard Drafting Conventions And Title Block Formats Of The Department. (C) Upto To 2000 Sqm, Other Items Carrying Out Comprehensive Services For Obtaining Green Building Approval/Certification (E.G., Igbc/Griha/Leed Or Equivalent), Which Includes Complete Documentation, Compliance Mapping, Coordination With The Designated Green Building Certification Agency, And Providing Recommendations For The Green Building Design. Preparation Of Boq Is Not Included In The Scope. (A) ≫ 15000 Sqm Upto 25000 Sqm, Other Items Carrying Out Comprehensive Services For Obtaining Green Building Approval/Certification (E.G., Igbc/Griha/Leed Or Equivalent), Which Includes Complete Documentation, Compliance Mapping, Coordination With The Designated Green Building Certification Agency, And Providing Recommendations For The Green Building Design. Preparation Of Boq Is Not Included In The Scope. (B) ≫ 2000 To 15000 Sqm, Other Items Carrying Out Comprehensive Services For Obtaining Green Building Approval/Certification (E.G., Igbc/Griha/Leed Or Equivalent), Which Includes Complete Documentation, Compliance Mapping, Coordination With The Designated Green Building Certification Agency, And Providing Recommendations For The Green Building Design. Preparation Of Boq Is Not Included In The Scope. (C) Upto To 2000 Sqm, Providing Comprehensive Building Information Modelling (Bim) Integration Services For The Project, Including The Creation, Coordination, And Management Of A Centralized 3D Bim Model That Integrates Architectural, Structural, Mep (Mechanical, Electrical, Plumbing), Hvac, Fire Safety, And Interior Design Components With Licence Software. The Scope Includes Preparing Discipline-Wise Models Using Standard Bim Software (E.G., Autodesk Revit, Navisworks), Developing Detailed And Accurate 3D Models From Approved 2D Drawings Or Design Inputs, Ensuring Proper Level Of Development (Lod 300/350/400 As Required). The Item Includes Model Coordination Among All Disciplines, Clash Detection And Resolution, Walkthroughs, 4D (Time-Based) And 5D (Cost-Based) Simulations, Quantity Take-Offs, Scheduling, And Support For Construction Sequencing And Planning. The Bim Environment Shall Include Integration With Cloud-Based Common Data Environment (Cde) For Design Collaboration, Version Control, And Drawing/Document Management. (A) ≫ 15000 Sqm Upto 25000 Sqm, Providing Comprehensive Building Information Modelling (Bim) Integration Services For The Project, Including The Creation, Coordination, And Management Of A Centralized 3D Bim Model That Integrates Architectural, Structural, Mep (Mechanical, Electrical, Plumbing), Hvac, Fire Safety, And Interior Design Components With Licence Software. The Scope Includes Preparing Discipline-Wise Models Using Standard Bim Software (E.G., Autodesk Revit, Navisworks), Developing Detailed And Accurate 3D Models From Approved 2D Drawings Or Design Inputs, Ensuring Proper Level Of Development (Lod 300/350/400 As Required). The Item Includes Model Coordination Among All Disciplines, Clash Detection And Resolution, Walkthroughs, 4D (Time-Based) And 5D (Cost-Based) Simulations, Quantity Take-Offs, Scheduling, And Support For Construction Sequencing And Planning. The Bim Environment Shall Include Integration With Cloud-Based Common Data Environment (Cde) For Design Collaboration, Version Control, And Drawing/Document Management. (B) ≫ 2000 To 15000 Sqm, Providing Comprehensive Building Information Modelling (Bim) Integration Services For The Project, Including The Creation, Coordination, And Management Of A Centralized 3D Bim Model That Integrates Architectural, Structural, Mep (Mechanical, Electrical, Plumbing), Hvac, Fire Safety, And Interior Design Components With Licence Software. The Scope Includes Preparing Discipline-Wise Models Using Standard Bim Software (E.G., Autodesk Revit, Navisworks), Developing Detailed And Accurate 3D Models From Approved 2D Drawings Or Design Inputs, Ensuring Proper Level Of Development (Lod 300/350/400 As Required). The Item Includes Model Coordination Among All Disciplines, Clash Detection And Resolution, Walkthroughs, 4D (Time-Based) And 5D (Cost-Based) Simulations, Quantity Take-Offs, Scheduling, And Support For Construction Sequencing And Planning. The Bim Environment Shall Include Integration With Cloud-Based Common Data Environment (Cde) For Design Collaboration, Version Control, And Drawing/Document Management. (C) Upto To 2000 Sqm, Rendering Of Services To Be Carried Out To Capture And Convert Documents, Drawings Or Images Into Digital Files In True Colour, Preserving Maximum Colour Fidelity And Detail, Output Files In Pdf Format Colour Scanning Work (A0 Size), Rendering Of Services To Be Carried Out To Capture And Convert Documents, Drawings Or Images Into Digital Files In True Colour, Preserving Maximum Colour Fidelity And Detail, Output Files In Pdf Format Colour Scanning Work (A1 Size), Rendering Of Services To Be Carried Out To Capture And Convert Documents, Drawings Or Images Into Digital Files In True Colour, Preserving Maximum Colour Fidelity And Detail, Output Files In Pdf Format Colour Scanning Work (A2 Size), Rendering Of Services To Be Carried Out To Capture And Convert Documents, Drawings Or Images Into Digital Files In True Colour, Preserving Maximum Colour Fidelity And Detail, Output Files In Pdf Format Colour Scanning Work (A3 Size), Rendering Of Services To Be Carried Out To Capture And Convert Documents, Drawings Or Images Into Digital Files In True Colour, Preserving Maximum Colour Fidelity And Detail, Output Files In Pdf Format Colour Scanning Work (A4 Size), Rendering Of Services To Be Carried Out For Printing Of Documents, Drawings, Or Reports In Full Colour On Standard Paper, Ensuring Clarity, Accuracy And Quality Finish As Per Specified Size. Colour Printing Work (A0 Size), Rendering Of Services To Be Carried Out For Printing Of Documents, Drawings, Or Reports In Full Colour On Standard Paper, Ensuring Clarity, Accuracy And Quality Finish As Per Specified Size. Colour Printing Work (A1 Size), Rendering Of Services To Be Carried Out For Printing Of Documents, Drawings, Or Reports In Full Colour On Standard Paper, Ensuring Clarity, Accuracy And Quality Finish As Per Specified Size. Colour Printing Work (A2 Size), Rendering Of Services To Be Carried Out For Printing Of Documents, Drawings, Or Reports In Full Colour On Standard Paper, Ensuring Clarity, Accuracy And Quality Finish As Per Specified Size. Colour Printing Work (A3 Size), Rendering Of Services To Be Carried Out For Printing Of Documents, Drawings, Or Reports In Full Colour On Standard Paper, Ensuring Clarity, Accuracy And Quality Finish As Per Specified Size. Colour Printing Work (A4 Size), Rendering Of Services To Be Carried Out For Printing Of Documents, Drawings, Or Reports In Black And White Print On Standard Paper, Ensuring Clarity, Accuracy And Quality Finish As Per Specified Size. Black And White Printing Work (A0 Size), Rendering Of Services To Be Carried Out For Printing Of Documents, Drawings, Or Reports In Black And White Print On Standard Paper, Ensuring Clarity, Accuracy And Quality Finish As Per Specified Size. Black And White Printing Work (A1 Size), Rendering Of Services To Be Carried Out For Printing Of Documents, Drawings, Or Reports In Black And White Print On Standard Paper, Ensuring Clarity, Accuracy And Quality Finish As Per Specified Size.Black And White Printing Work (A2 Size), Rendering Of Services To Be Carried Out For Printing Of Documents, Drawings, Or Reports In Black And White Print On Standard Paper, Ensuring Clarity, Accuracy And Quality Finish As Per Specified Size.Black And White Printing Work (A3 Size), Rendering Of Services To Be Carried Out For Printing Of Documents, Drawings, Or Reports In Black And White Print On Standard Paper, Ensuring Clarity, Accuracy And Quality Finish As Per Specified Size.Black And White Printing Work (A4 Size), Government Confidential And Important Documents Rendering Of Services To Be Carried Out From Government Office Premises. Additional Work To Be Carried Out For -A0 Size, Government Confidential And Important Documents Rendering Of Services To Be Carried Out From Government Office Premises. Additional Work To Be Carried Out For -A1 Size, Government Confidential And Important Documents Rendering Of Services To Be Carried Out From Government Office Premises. Additional Work To Be Carried Out For -A2 Size, Government Confidential And Important Documents Rendering Of Services To Be Carried Out From Government Office Premises. Additional Work To Be Carried Out For -A3 Size, Government Confidential And Important Documents Rendering Of Services To Be Carried Out From Government Office Premises. Additional Work To Be Carried Out For -A4 Size
