|
| 1 | 33 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel |
| 2 | 33 KV CTs.Outdoor Oil immersed type 300-150/5 Amps |
| 3 | 33 KV control & relay panel with static relay for Transformer protection |
| 4 | 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel |
| 5 | 11 KV.C.Ts.(Outdoor dry type) 300-150/5-5 Amps |
| 6 | 11 KV control & relay panel with static relay for Transformer protection |
| 7 | 11 KV control & relay panel with numerical static relay for double feeder protection |
| 8 | 33 KV, ISOLATOR 600 AMP.(Turn and twist type) |
| 9 | 11 KV, ISOLATOR 800 AMP.(Turn and twist type) |
| 10 | 9 KV Gapless type(5 KA) polymer lightening arrestor |
| 11 | 33 KV Single Phase PTs. |
| 12 | 11 KV Single Phase PTs. (Resin Molded) |
| 13 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-9 mtr. Long= 333.9 kg |
| 14 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-7 mtr. Long= 259.7 kg |
| 15 | 33 KV Pin Insulator Polymer Composite (10 KN) |
| 16 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 17 | 33 KV (45KN) Composite Polymer Disc Insulators |
| 18 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg |
| 19 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 20 | 11 KV Strain hardware (T&C type) fittings |
| 21 | Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) |
| 22 | M S ANGLE 75X75X6 mm |
| 23 | 33 KV Strain hardware (T&C type) fittings |
| 24 | Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) |
| 25 | M.S.Angle 50x50x6 mm |
| 26 | M S Angle 65X65X6 mm |
| 27 | 33/11 KV Power transformer , OFTC Type , 3150 KVA (Loss 3+15 KW)(Rep-BGP) |
| 28 | 33 KV Polymer Lightening arrestor Gapless type, Station type |
| 29 | Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) |
| 30 | Copper Control Cable 12 Core. 2.5 Sq.mm. (Unarmoured) |
| 31 | 3Ph 4W 3x63.5V lb=5A Imax=10A, HT trivector meter,0.5s,(For Consumer metering) |
| 32 | M S Channel 100X50x6 mm |
| 33 | (v) ACSR Dog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.), (6/4.72 + 7/1.57 mm) |
| 34 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 35 | 11 KV AB Switch Polymer type 400 Amp with Complete fitting |
| 36 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 37 | WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long |
| 38 | SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB |
| 39 | Marshelling box with 10 no. connectors |
| 40 | T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG |
| 41 | Bi Metallic Clamp for Power Transformer of Brass Flat 50x50x10MM |
| 42 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 43 | MS strain plate 65x8mm 250mm long |
| 44 | Stringing of Each 33 KV Bus- upper and lower including drop jumpering, jointing with clamps, incoming DP/ ME to BUS |
| 45 | Stringing of Each 11 KV Bus-upper and lower bus including, drop jumpering and jointing with clamps,through outgoing VCB/ ME/ DP, upto station transformer |
| 46 | Stringing of All 33 KV & 11 KV Jumpers - from 33 KV gartry through 33 KV VCB to PTR to 11 KV gantry through 11KV VCB |
| 47 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 48 | Concreting of structures & foundation (1:3:6) |
| 49 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 50 | Stay set complete without Stay wire 16 mm. (Painted) |
| 51 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 52 | Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay |
| 53 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 54 | Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth |
| 55 | Erection of Plinth per VCB- 33KV or 11KV |
| 56 | PTR Fndn.Cncrt.:1:1.5:3 Rio 5.634,1:5:8 Rio 7.545 cmt&M.S.Flat/rod 324.87 kg |
| 57 | M.S.Nuts with Bolts |
| 58 | Red oxide paint |
| 59 | Aluminium paint |
| 60 | Danger Boards Enamelled 33 KV |
| 61 | Galvanized Iron (GI) Flat 50X6 MM |
| 62 | G.I.Pipe 40 mm Dia C grade type |
| 63 | GI Pipe 150 mm B Grade |
| 64 | Earthing Rod 3 mtrs.(Gelvanised) 25 mm Rod |
| 65 | Bentonite compound powder |
| 66 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 67 | Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm |
| 68 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor |
| 69 | Clamp for 140 Kg PCC Pole MS Flat 50x6 mm |
| 70 | Stay Insulators 90X65mm |
| 71 | Back filling of poles with boulders. |
| 72 | G.I. WIRES 4.0 MM. (8 SWG) |
| 73 | Danger Boards Enamelled 11 KV |
| 74 | Aluminium Binding wire and tape |
| 75 | Carpet guarding |
| 76 | Stay set 20 mm. complete without Stay wire (Painted) |
| 77 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 78 | Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole |
| 79 | Labour charge for company side material |
| 80 | Labour charge for contractor side material |
| 81 | GST 18% Please Enable Macros to View BoQ information |
