Tender For Comprehensive Maintenance Of B/R Works In Otm Accns Of Pocket A Of Under Ge (South) Binnaguri - Demolition of Brickwork built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions complete allas specified and as directed. 2 Material and Labour for brick work with Fly ash brick straight of curved on plan exc 6m mean radius built in CM (1:6) complete allas specified and as directed. 3 Ditto all per item no above but except brick 4 Material and Labour for Brick work with Fly ash bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete allas specified and as directed. 5 Taking down plaster in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with wateretc complete all as specified and directed by the Engr-in-charge. 6 M&Lfor 15 mm thick renderingon fair faces of brick work in cement mortar (1:6) andfinished the surfaceseven and smooth without using extra cementetc complete all as specified and directed by the Engr-in-charge. 7 M&L for 5mm thickrendering in CM (1:3) onconcrete surfaces as in ceilingandfinishing the surfaces even and smooth with out using extra cementetc complete all as specified and directed by the Engr-in-charge. 8 M&L for 20mm thick rendering on fair faces of brick work or concrete surfaces in two layers (10mm & 10mm) in cement mortar (1:4) and finished the surface evenand smooth with applying WPCetc complete all as specified and directed by the Engr-in-charge.(Note : WPC will be measured and paid separately) 9 Supply only liquid water proofing compound 10 Materials and labour forPreparation of new plastered surfaces of walls and applying three coats of white washcomplete all as specified and as directed. 11 Materials and labour for preparation of new plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of primer complete all as specified and as directed by the Engr-in-Charge 12 Materials and labour forPreparation of new plastered surfaces of ceiling and applying three coats of white washcomplete all as specified and as directed. 13 M&L preparation on new plastered surfaces of wall and applying two coats ofexterior grade weather coat paint over a coat of primercomplete all as specified and directed. 14 S & F 2mm thick wall care putty (in two layers)on wall/ceiling complete all as specified and as directed by Engineer-in-charge. 15 M&L forPreparation of old plastered surfaces and applying one coat of oil bound distemper on walls complete all as specified and as directed by the Engr-in-Charge. 16 M&L forPreparation of old plastered surfaces and applying one coat of exterior grade weather coat paintcomplete all as specified and directed. 17 M & L preparation of new surface & applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces exc 10 cm girthall as specified and directed.. 18 M & L preparation of new surface & applying two coats of synthetic enamel paint over a coat of red oxide to steel surfaces exc 10 cm girthall as specified and directed.. 19 M&L forpreparation of old steel surfaces of any descriptionover 10 cm width or girth and applyingone coat of synthetic enamel paintcomplete all as specified and directed. 20 M&L forpreparation of old wooden surfaces of any descriptionover 10 cm width or girth and applyingone coat of synthetic enamel paintcomplete all as specified and directed. 21 Taking down chowkats or frame with shutter (without taking off shutters from the frame) exe 1.5 sqmn.exe 4 sqm each.complete all as specified and as directed by Engr-in-Charge. 22 Taking down chowkats or frame with shutter (without taking off shutters from the frame) n.exe 1.5 sqm each.complete all as specified and as directed by Engr-in-Charge. 23 Taking down shutter exe 1sqm and n.exe 2sqm each.complete all as specified and as directed by Engr-in-Charge. 24 Taking down shutter n exe 1sqm each.complete all as specified and as directed by Engr-in-Charge. 25 M & L for in repair Pressed steel frames of 125X60mm minimum 1 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixedcomplete all as specified 26 S & F 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including finishes of disterub surfaces of wall etc, complete as specified 27 M & L PCC (1:3:6) type C1 as in holdfast block, coping, bedblock etc.complete all as specified and as directed by Engr-in-Charge. 28 S&F 30mmflush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed. 29 S&F of 30mm thick factory made Skeleton Shutter partly glazed and partly panelled i.e. upper panel will be wire mesh fitted externally in the clear space & lower panel will be plain colour PVC sheet 5mm thickcomplete all as specified and as directed. 30 S/F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat mould plain coloured PVC C channel having PVC sheet strip of 20mm width stuck inside with solvent cement all as specified and directed. 31 S&F of factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and as directed. 32 S&F Aluminium anodizedbarrel tower bolts, extruded section 200mm long. 33 S&F Aluminium anodized handles, D type, 150mm long. 34 S&F in aluminium sliding door bolt 300 mmlong, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate. 35 S&F Stainless steel butt hinges medium weight 150mm long for wooden door complete all as specified and directed. 36 S&F Stainless steel butt hinges medium weight 100mm long for PVC door complete all as specified and directed.. 37 S&F Aluminium anodizedbarrel tower bolts, extruded section 150mm long. 38 S&F Aluminium anodized handles, D type, 125mm long 39 S&F Powder coated aluminiumsliding windows for three track with rubber gasket, stopperpowder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm andshutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturers instructions and all as specified and as directed by the Engr-in-Charge. 40 S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed. 41 S&F in repairs power coated aluminium door shutter fixed including roller machinewith rubber gasket, stopper, cleats, handlesetc complete incl aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium doorsection of top, bottom and lock rail shutter frame of 80 mm x 38mm x 2.00 mm taking down old door with necessary all fittingand all necessary fittinngs complete all as specified and as directed by the Engr-in-Charge. 42 S&F in repairpower coated aluminium Partition wall of framesize 80mm x 38mm x 2.00 mmwithstandard beads/glazing clips, locking arrangement etcwith necessary all fittings complete all as per manufacturers instructions and all as specified and as directed by the Engr-in-Charge. 43 S&F 4.8 mmplain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane. 44 M&L9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partitionscomplete al as specified. 45 Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. 46 M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coatedmain runner of dimension 39 mm x 24mm x 0.80mm thick ( thicknesscomprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thicknesscomprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) withand including 6 mm thick designed prepainted calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fastenersfrom purlins of the roof with necessary fittings and fixtures etc complete all as directed. 47 M&L for 10 mm thick Gypsum board false ceiling joint less work including application of putty over gypsum board to achieve smooth and joint less celing surface and applying two coat of oil bound distemper in ceiling surfaces including framed work forconsisting of 60 mm wide GI steel C section of as in main of 0.71mm thick and 60 mm GI channel section as in cross member of 0.63 mm thick and GI steel angle section as in suspenders of size 25x20x0.63 mm and wire cloth of 0.71 mm dia of wire and 100x50mm aperature size including cutting , riveting, steel fastener, drilling holes in RCC roof and securing with screws etc complete all as specified and directed by Engineer-in-Charge. 48 M&LPOP cornice width n.exc 200mm wide in ceiling edge of any design and shape ,complete all as specified and directed by Engineer-in-Charge 49 S&F hollow PVC Wall panneling with designed/printed panels having wide of 300mm including necessary caping/fillets at top, bottom and junctions/corners of wall where ever required as per site etc complete all as per specified and directed. 50 S & F WPC louvers wallpanneling (profile sheet) width varies from 10mm to 17mm and width varies from 150mm to 300mm inclusive of necessary fittings,fixtures, grids and capping/fillets reuired at site as per manufacture specifications etc complete all as spefied & directed etc complete all as specified and directed. Make-Rajshree or equivalent.Note: The size, pattern and colour of WPC louvers panneling shall be approved by Engineer-in-charge. 51 Supply & fix framed work such as grills, gratings, etc., with ends of bars shouldered and/or riv-eted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 390 Gde E-165 including taking down old wrought iron or mild steelcompleteall as directed by the Engr-in-Charge. 52 S&Ffor CP curtain rod 25mm diaandwith brackets,knobs etc complete including taking out old one,the type portion and size of curtain rod shall be approved by Engr-in-Charge. Note: The size and partern of curtain rod shall be approved by Engr-in-charge. 53 Supply and fixing in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden/aluminium frames completeall as specified and as directed by the Engr-in-Charge. 54 Hacking out old/broken glass (any description, size and quality) upto 12 storied bldg complete all asspecified and as directed 55 Supply and fixing for 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty insquareexe 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge.upto 12 storied bldg. 56 Supply and fixing for 4mm thick figured glass, ordinary quality and glazing with oil putty insquaren .exe 0.50 Sqm in each pane upto 12 storied bldg complete all as specified and as directed by the Engr-in-Charge. 57 Dismantling of floor hearth or wall tiling incl cement mortar bedding ( but not backing) and removing debris and rubbish off the premises. 58 M&L forvitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting/dado etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed . 59 M&L forvitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in CM (1:4) for backing coat complete all as specified and directed . 60 M & L for double charge Vitrified Ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as flooring with border of dark shed,over and including 15mm thick screed bed in CM (1:6)set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match etc complete in all respect as specified. 61 M & L for double charge Vitrified Ceramic tiles in skirting light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in skirting and dado over and including backing coat in CM (1:6)set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to matchetc completeall as specified. 62 Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed by the Engr-in-Charge. 63 Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed by the Engr-in-Charge. 64 Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed by the Engr-in-Charge. 65 Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed by the Engr-in-Charge. 66 M&L for glazed colouredceramic tiles (300x450x7mm thick)on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed by Engr-in-charge. 67 S & F in repair vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron P or S trap with back inlet includingflush pipe of suitable length to connection with existing cistern & make good complete all as specified and as directed by Engineer-in-Charge.(Make : CERA or Euivalent) 68 S&F in repairs, vitreous china wash down water closet pan, (pedestal pattern) white, including P or S trap and withplastic water closet seat cover white, closed pattern with flat bottom, andcover and mild steel chromium plated or aluminised hinging device etc complete.(Make : CERA or Euivalent) 69 S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumisedhanging device complete all as directed.(Make : CERA or Euivalent) 70 Supply and fixing in repair cascade type vitreous china white wash down water closet P or S type wall hung with flushing cistern, hush seat cover and internal fittings complete with fixing bolts and making all necessary connections complete all as specified and directed by Engr-in-Charge.(Make : CERA or Euivalent) 71 S&F in repairCP health faucet (ABS body)mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook in cluding making connections and fixed in position complete in all respect and specified (Make : ESSCO/Marc/Cera). 72 S&F in repair of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle,bracket, longflush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC (Make : Prayag or Euivalent) 73 Taking up or down 15mm bore steel water tubings and fittings etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified and as directedof following bore:- 74 Taking up or down 20mm bore steel water tubings and fittings etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified and as directedof following bore:- 75 M & L for 15mm steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor including cutting grooves in wall etc complete all as specified 76 M & L for 20mm steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor including cutting grooves in wall etc complete all as specified 77 Supply & fix in reapir Bib tapcast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one. (Make : Prayag or Euivalent) 78 S&F in repair of pillars taps,fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, scewed for iron pipe 15 mm bore(Make : Prayag or Euivalent) 79 Supply & fixin repairangular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed by the Engr-in-Charge. (Make : Prayag or Euivalent) 80 S&F in repairs for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair. (Make : Prayag or Euivalent) 81 S&F in repair ofswivel shower of CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed. (Make : Prayag or Euivalent) 82 S&F in repair of PVC connections 15 mm size with PTMT nuts of length 600 mm.pipe(Make : Prayag or Euivalent) 83 S & F stainless steel soap dish best quality fixed to plugs with chromium plated brass complete all as specified and directed (Make : Prayag or Euivalent) 84 S&F in repairtubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges. (Make : Prayag or Euivalent) 85 S&F in repairSS Towel rack fixed to wall with necessary fittings/fixtures etc complete all as specified and directed. (Make : Prayag or Euivalent) 86 S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plug with chromium plated brass screws & cup washers. (Make : Prayag or Euivalent) 87 S&F in repair corner glass shelf 300mm size with brass brackets fixed to wall with necessary fittings/fixtures etc complete all as specified and directed. (Make : Prayag or Euivalent) 88 S&F in repair Front glass shelf 500 x 125mm sizefixed to wall with necessary fittings/fixtures etc complete all as specified and directed. (Make : Prayag or Euivalent) 89 Supply and fix in repair stainless steel kitchen plate rack of size 31x30x10and 1 mm thick specified and directed by the Engr-in-Charge. (Make- Pryag or Euivalent) 90 S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm and including 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) (Make- Pryag or Euivalent) 91 S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and including 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) (Make- Pryag or Euivalent) 92 S & F in repairs 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed. 93 S&F in repairs 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 25mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed etc complete all as directed. 94 Receivingday to day routine complaint slips of petty nature of B/R complaints for Plumber of Sanitary,Internal water supply and carpenter for Joinery & Glazings etc as issued by MES Rep from sub Division ( Complaint Cell) of South Zone Binnaguri under GE (S) Binnaguri including detection of fault and rectify/repair the same to maintain the internal water supply services,Plumbing, Joinery etc services smoothly and depositing the complaint slip back duly signed by Users and MES Rep for satisfactorily attending the complaints complete all as specified and as directed.Note - (i) Quoted rates shall deemed to be included for detecting fault including minor additions and alterations and materials in existing buildings as required to make the same serviceable fixed at the same place or other as directed at site. (ii) Complaint slip shall be provided by the contractor duly printed with CA No & Name of firm as per format given by Engr in Charge and the cost shall be deemed to be included in quoted rates. (Note :-In absence of the MES Rep payment will not be allowed during running/Final payment.)(iii)All necessary tools & plants i.e. Carpentars Saw, spanner set, wrench, screw driver set, drilling machine, bomboo/aluminium ladder, crimping tool, cuttuing plier etc shall have to be provided by contractor at his own cost.(iv) In case of any accident/mishapenning occurred during the repair/replacement of work shall be responsibity of Contractor. (v)The works are not falling under minor repair shall be paid shall be measured and paid separately under respective items of BoQ.
