Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-12-2025 |
| 2 | 27-11-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-12-2025 |
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of cement concrete in ground floor,paving nexc 15cm thick(below or above GL) complete all as specified and directed |
| 3 | M & L for 75mm thick PCC 1:3:6, type C-1(20mm graded agg), as in Plinth protection etc finished even & smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction complete all as specified |
| 4 | M&L PCC 1:2:4 type B-1 (20mm graded agg) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 5 | M & L cement concrete 1:2:4 type B1 (20mm aggregate) in surface channel and drains complete all as specified and directed. |
| 6 | Demolition of brick work, stone/boulder/block masonary built in cement mortar complete all specified and directed |
| 7 | M&L for brick work with sub class \"B\" brick old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortor 1:6 complete all as spfd & directed. |
| 8 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in C.M. 1:6, complete all as specified. |
| 9 | M&L for Pre-cast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6,complete all as specified and directed. |
| 10 | Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed. |
| 11 | M&L 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less that 50gm/liter and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter / 10 Sqm over and including priming coat of exterior primer applied @0.90 liter/10 Sqm over new/old surfaces over 1 mm thick wall putty complete all as specified. |
| 14 | M&L for Preparing new plastered wall surfaces and applying two coat of oil emulsion distemper over a coat of wall putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 15 | M&L for Preparing old surfaces, plastered or unplasterd old decorated wall/ceiling surfacesandapplying two coat of oil emulsion distemper over a coat of wall putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 16 | M&L three coats of white wash on wall surfaces including prepration of new plastered surfaces complete all as specified and directed |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 18 | Roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 19 | M & L for 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in levelling course on roof etc. complete all as specified & directed. |
| 20 | M&L for non-skid ceramic light shade tiles/outdoor tiles 7-10 mm thick (square or rectangular) polished area of each tile 0.06 sqm but n.exc. 0.18 sqm in floor etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over screed bed,rendering or bedding layer of mortar CM (1:6) 10mm thick all as specified and directed |
| 21 | M&L for non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in skirting over and including 10mm thick screed in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed |
| 22 | M/L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm and not exceeding 0.36 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed |
| 23 | M&L for vitrified ceramic light shade tiles/outdoor tiles 8-12mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in floor etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over screed bed,bedding layer of mortar CM (1:6) 15mm thick all as specified and directed |
| 24 | M&L for vitrified ceramic light shade tiles/outdoor tiles 8-12mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in skiritng etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over rendering in CM (1:4) 10 mm thick all as specified and directed |
| 25 | M&L for coloured glazed ceramic tiles in vertical surface, size 300x450x7-8mm/300x600x7-8mm thick set and jointed in neat sement slurry and pointed in white or colour cement to match over 10 mm thick plaster in CM 1:4 complete all as spfd & directed. |
| 26 | M&L Granite (of any type) tiles 16-20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in CM 1:6 etc complete all as specified and as directed |
| 27 | M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete in floors over and including 15mm thick screed in CM 1:6 etc complete all as spfd & directed |
| 28 | M&L for Machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, in skirting over and including 10mm thick screed in CM 1:4 etc set complete all as spfd & directed |
| 29 | Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 30 | Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 31 | S&F for mild steel framed wk as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with & incl either hooks & hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and slides) & hanging, also fastening & fixingFe-290, Gde-165 complete all as spfd & directed. |
| 32 | S&F 0.63 mm th Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams,including bending or turning up, mitred angles, etc. as required complete all as spfd & directed. |
| 33 | S&F Steel Window Box Type ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including welding to existing building framing including following fitting welded to frame/shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles - 100mm (c) Stopper Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded with hinge to frame – 01 Noper leaf (d) MS hinges of size 100mm-02 Nos per leaf (e) MS tower bolt 100mm-02 no.s per leaf complete all as specified and directed.Note : Glass and painting shall be measured and paid separately under appropriate item complete all as specified and directed. |
| 34 | S&F Steel Window Box Type ERW hollow P section of size 60mm x 25mm,1.25 thick sheetsingle rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting one no. sash bar of Flat- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including welding to existing building framing including following fitting welded to frame/shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles - 100mm (c) Stopper Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded with hinge to frame – 01 Noper leaf (d) MS hinges of size 100mm-02 Nos per leaf (e) MS tower bolt 100mm-02 no.s per leaf complete all as specified and directed.Note: Wire mesh and painting shall be measured and paid separately under appropriate item complete all as specified and directed. |
| 35 | S&F Pressed steel frames 125 x 60mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed |
| 36 | M&L cement concrete type C1 1:3:6 (20 mm graded stone aggreagte) as in filling inside pressed steel chowkhats complete all as specified and directed. |
| 37 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl 3-6mm teakwood lipping on the edges complete all as specified and directed. |
| 38 | M&L for 2nd class hardwood, 35 mm thick glazed and skelton shutter, open rebated and prepared to receive glass, gauge, etc. divided into squares, with plain, chamfered or rounded , mitred and rebated shash bars any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc; size of members of shutter as specified in SSR Part I, Sectioin 8clause 8.24(a); supplied and fitted to chowkhat complete all as specified and directed |
| 39 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door /window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 40 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 42 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 43 | Factory made solid panel PVC wiremesh door shutter 30 mm thick (style) wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree) used instead of exposed portion of PVC sheet beading ,wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be secured with additional layer of wire netting 12mm gauge stretched to tighten firmly consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 44 | S&F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded all as spfd and as directed. |
| 45 | S&F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded all as spfd and as directed. |
| 46 | S & F MS work as in window guard bars,holdfasts etc., plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed |
| 47 | S&F forpowder coated anodised aluminium frame for doors, windows ventilator with one or more rebates including joining cleat for fixing etc , screws, hinges, brackets, dash fastners/ rawl plugs etc. complete all as specified and directed.complete all as specified and directed. |
| 48 | S&F powder coated aluminiumdoor shutters, aluminium section weighing not less than 0.55 Kg/m including necessary jointing cleats glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed |
| 49 | S&Fpowder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),aluminium hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed. |
| 50 | S&F Anodised aluminium grill powder caoted (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 51 | M&L fordouble action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 52 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floors 150mm long all as specified and as directed. |
| 53 | S&F brass 4 levers Mortice lock,vertical type,size 100 mm complete all as specified and directed. |
| 54 | S&F 4.80 mm thick sheet glass ordinary quality and glazing with rubber packing and beading in square exc 0.50 sqm in each panels complete all as specified and directed. |
| 55 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed. |
| 56 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 57 | S&F Wire netting of stainless steel wire 0.71 mm dia fixed with tinned tacks of wire staples/screws having size of mesh 12mm complete all as specified and directed. |
| 58 | S&F 150 mm aluminium handles, cast type anodisedcomplete all as specified and directed. |
| 59 | S&F150 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed |
| 60 | S&F 100 mm Mild Steel barrel tower bolts, stove enamelled, black with bright bolts complete all as specified and directed |
| 61 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 62 | S&F 250-300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 63 | S&F 15mm Sensor Faucet for Wash Basin Deck mounted Complete with Control Box (Battery Operated incl battery) with Extension Body,min. height 285mm and spout length 150mm,cast copper alloy, nickel chromium plated,chrome finished incl necessary accessories complete all as spfd & directed. |
| 64 | S&F in vitreous china sensor based urinal min. size 480x300x740 mm with sensor Flushing Valve for Urinal with complete Kit (Battery Operated incl battery) including Fixing Accessories, urinal accessories and waste coupling complete all as specified and directed |
| 65 | S&F Curved shaped urinal partition min. size 450x 900 mm of 8mm thick frosted glass incl necessary glass fittings with chrome finish complete all as specified and directed |
| 66 | S&F in repair Vitreous China Rimless Single Piece WC min. size 370x665x750 mm With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, incl Fixing Accessories and Accessories Set and necessary trap complete all as specified and as directed |
| 67 | S&F in repair 15mm bore Chromium plated cast copper alloy Two Way Bib Cock with Wall Flange complete all as specified and directed. |
| 68 | S&F 900mmx600mmx6mm thick frameless rectangular Bathroom Wall Mirror with moulded edges with heavy duty hooks at back (4no.s) fixed with screws complete all as spfd & directed. |
| 69 | S&F in repairs vitreous china under Counter Basin Rectangular shaped min. size 485x370x205 mm with Fixing Accessories,incl brass chromium plated waste fittings, fixing in slab/granite incl necessary fixing arrangement complete all as specified and directed. |
| 70 | S & F in repairs Stainless steel kitchen plate rack 900 x 600 and made out of 1 mm thick stainless steel sheet complete all as directed by Engr in Charge. |
| 71 | S&F in 32mm bore of trap Brass chromium plated bottle traps for wash basins/urinals with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed |
| 72 | S&F in repairs vitreous china wash basin,white flat back size 550X400mm incl 32mm size waste fittings, brass chromium plated,waste pipe and brackets fixing in position complete all as specified and directed. |
| 73 | S&F fixed in repairs swivel shower of CP brass any colour for fixing with 15mm pipe along with shower arm 15mm size 195mm long with bend of 45 degree with flage any colour complete all as spfd & directed |
| 74 | S&F in repair Vitreous China Wash down water closetEWC with plastic seat cover complete all as specified and as directed . |
| 75 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 76 | S&F for PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe upto WC etc and fixed in repair all as specified |
| 77 | S&F in repair Tubular towel rail brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 78 | S&F in repair CP Towel Ring fixed with and including Chromium plated brass screws and cleats complete all as specified and directed |
| 79 | S&F in repair 15mm bore Chromium plated Bib taps fancy type, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified |
| 80 | S&F in repairsstop valve/angle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy screwed down for iron pipe and fixed etc complete all as specified |
| 81 | S&F in repairs Brass CP mixer(whb/sink/wall mixer) fancy type for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 82 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified |
| 83 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm long fixed in repairs all as spfd and as directed. |
| 84 | S&F 15 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking up or down 15 mm GI tubingcomplete all as spfd & directed |
| 85 | S&F 20 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking up or down 20 mm GI tubingcomplete all as spfd & directed |
| 86 | S&F in repairs Health Faucet (ABS Body) MS, Chromium platedsuitable for 15mm dia pipe with 1.25 mtrlong flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 87 | S & F in repair Harrison rails/curtain rods, mild steel, chromium plated with brackets, finials,ends knobs,stops, rollers etc fancy type as approved complete all as specified. |
| 88 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs complete all as spfd & directed. |
| 89 | Supply and fix 1000 Ltr rotational moulded polyethylene water storage tanks ( cylinderical verticle with closed top) hoisted & fixed in position including20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball incl dismantlling old water tank, complete all as specified and directed. |
| 90 | S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 91 | S&F 40 mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm in any length incl elbow/Tee with rubber ring joints fixed to walls or laid in floors including fixing complete all as specified and directed. |
| 92 | S&F in Grating doom chromium plated 100mm dia all as specified and directed |
| 93 | Demolition and breaking up drain pipes 100 mm dia(Salt glazed ware, AC or reinforced concrete) set in cement mortar etc. complete all as specified and directed. |
| 94 | S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls or laid in floors including fixing complete all as specified and directed. |
| 95 | S&F 110 mm bore PVC(SWR) bend any radius complete all as specified and directed. |
| 96 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets,fittings etc.as specified and directed. |
| 97 | M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling and walling with screws to timber frame work complete all as sfd and directed. |
| 98 | M&L II nd classhard wood plain fillets square or rectangular in section cleansawn but bullnosed chamfared or rounded on one edge or face sectional area exc 3 sqcm and nexc 6 sqcm secured in nails complete all as specified and directed |
| 99 | Dismantling of timber scantling 40 Sqcm under in section in any position, fixed with nails unframed work complete all as spfd & directed. |
| 100 | M&L for II nd classhard wood plain fillets square or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcmcomplete all as specified and directed |
| 101 | Dismantling of timber scantling 40 sqcm and over in section in any position for framed works complete all as specified and directed |
| 102 | M&L for 2nd class hard wood as in scantling clean sawn framed & fixed complete all spfd & directed. |
| 103 | M&L for one coat of creasote oil to wooden surfaces new or old of any description including prepration of surfaces complete all as specified and directed. |
| 104 | M&L for two coat of synthetic enamel paint overa coat of pink primer to new wooden surface of any description exc 10 cm girth or width including prepration of new wooden surfaces complete all as specified and directed |
| 105 | S&F False Ceiling Horizontal level regular edge grid 600 x 600 mm form work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as spfd and directed. |
| 106 | S&F 5 to 8mm thick PVC hollow type wall panelling of approved color/pattern fixed to wall/ceiling with L or U shaped beading at ends fixed with screws complete all as specified and as directed. |
| 107 | M&L for 18/19mm thickness Medium density fibre board,one side decorative choice oflamination other side balancing, exterior grade, fixedin repair to framework with screws etc complete all as specified and directed |
| 108 | S&F 6mm thick teak wood lipping fixed with nails to block board or veneered particle boardall as spfd and directed. |
| 109 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm) all as specified. |
| 110 | S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed. |
| 111 | S&F catch magnet for cupboard shutter complete all as specified and directed. |
| 112 | Dismantling mild steel work of any description and in any position complete all as specified |
| 113 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and gastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) including distance pieces, cleats etc complete all as specified and directed |
| 114 | Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/ wall clading complete all as spfd and directed |
| 115 | M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour (as approved) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 116 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 117 | S&F 0.63 mm th galvanised corrugated mild steel sheeting with two corrugation side lap fixed with \"L\" type or \"J\" type or cranked hook bolts/self tapping screws fixed to roof covering/ cladding to wall complete all as spfd & directed |
| 118 | M & L preparing old previously treated surfaces of steel surface and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed. |
| 119 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as spfd and directed. |
| 120 | Demolition reinforced cement concrete in any description and in any position complete all as specified and directed. |
| 121 | M&L Slabs supported on walls,beams and columns in floors,roofs, landings ,balconies, canopies, deck slabs and in shelves and the like using cement concrete type B-0 1:2:4 complete all as specified and directed |
| 122 | M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in cover slabs set in cement mortar 1:6, size required at site include necessary formwork complete all as specified and directed. |
| 123 | S&F Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete complete all as specified and directed |
| 124 | M & L mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed |
| 125 | M & L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed. |
| 126 | Roughening surfaces of old concrete floor/path by picking ,sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engr-In-Charge |
| 127 | M&L for coloured chequered cement concrete tiles 30 cm x 30 cm x 20-25 mm thick set, jointed and pointed in neat cement slurry with coloured cement and pigments in floor including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed by Engr-In-Charge |
| 128 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to distance not exceeding 50m and making good surface complete all as spfd and directed. |
| 129 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 130 | S&F for steel work as in tubular truss,purlins,posts etc. incl special shaped washer etc complete using erw or induction butt welded tubes or nut bolt,fastener etc. confirming to IS 1161-1979 Gde st-240 complete all as specified and directed |
| 131 | S&F Plates (plain or chequered) channels , square cut or notched forming holes ,with out any attachment in Fe 290(Gde E-165) complete all as specified and directed |
| 132 | E&M |
| 133 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc all as specified. |
| 134 | M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/ surface/concealedPVC conduit of suitable size, complete with all accessories/fitting, includingheavy duty PVC/ABS terminal switch board floor mounted/flush type(depth not less than 45 mm)of suitable size (lengthX width)for mountingmodular switches, Modular sockets, Modular regulators includingPVC module top cover plate with frame of suitable size , brass screw and washer including unsheathed single core PVC insulatedcable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified for one light point / fan point controlled by one way switch of 5/6 Amps. |
| 135 | All as per item No. 133 above but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps. |
| 136 | All as per item No.133 above but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps. |
| 137 | M&L point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/ surface/concealedPVC conduit of suitable size, complete with all accessories/fitting, includingheavy duty PVC/ABS terminal switch board surfacemounted/flush type to wall (depth not less than 45 mm)of suitable size (lengthX width)for mountingmodular switches, Modular sockets, Modular regulators includingPVC module top cover plate with frame of suitable size , brass screw and washer including unsheathed single core PVC insulatedcable green in colour 2.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified for 15/16 amp socket outlet point controlled by one , one way switch of 15/16 Amps complete all as specified. |
| 138 | S&FModular switch 1 module single pole one way 6 Amps, 240 volt complete all as specified. |
| 139 | S&FModular switch 1 module single pole one way 16 Amps, 240 volt complete all as specified. |
| 140 | S&F Modular socket outletn, 2 module,3 pin 5/6 Amps, 240 voltcomplete all as specified. |
| 141 | S&F Modular socket out let, 2 module, two in one 3 pin 5/6 Amps and 3 pin 15/16 amp , 240 volt, complete all as specified. |
| 142 | S&F ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified. |
| 143 | S&F lamp holder PVC /poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified. |
| 144 | S&F stepped type electronic fan regulator modular type ,2 module,240 volt complete all as specified. |
| 145 | S&FLED tube light fitting 20 watt integratedtypeapprox4 feetlongalong with all fixtures and fittings, internally pre wired and including connecting up to ceiling rose withtwin core twisted flexible copper conductor cable with suitable size, 20Wcomplete all as specified. |
| 146 | Supply and fixing LED lights fitting mirror type with high out put diffuser 2 feet,1x 10W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. |
| 147 | Supply and fixing LED lights fitting for mirror, 2 feet,1x 12W, 220V, Black rose golden finish 3-in-1 colour changing ,decorative type , connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. |
| 148 | S&F LED Bulb/LED retrofit \"T\" bulb 12 watts, B22 end cap complete all as specified. |
| 149 | Supply and fixing in repair LED security light fitting 1x30 Watt luminaries with die cast aluminium housing IP-66/65 comprising epoxy powder coated enclosed lens embeddedframe with high power LED white lamp complete all as specified and directed. |
| 150 | supply and fixing GI bracket made out of 0.9-1.2 mtr GI pipe bent to shape light grade of 25to 40 mm dia, bracket mounting clamps nut bolts etc all as specified and directed. |
| 151 | Supply and fixing LEDBulk Head 10 watt aluminium housing IP 43 complete all as specified and directed |
| 152 | Supply and fixing LED luminaire 600 mm x 600 mm , 36 watt, 220 V AC recessed type with high efficiencydiffuser soft glare free light complete with driver,suitable for roof ceiling including connecting up with driver with three core flexible copper conductorof suitable size complete all as specified. |
| 153 | Supply and fixing TPN DB, 4 way, IP-43 protection double door CRCA sheet not less than 1.2 mm thick,flush to wall/ fixed on surface with proper arrangement , with suitable capacity copper bus bar with nuetral bus bar, earth bar and cable ties for cable management, suitable for MCB TPN upto 10 Amp as incomer and MCB MCB 06 to 32Amp as outgoing complete & making necessary electrical connection for incoming and outgoing cables, with copper lugs, crimpped with crimping tool complete all as specified and directed. |
| 154 | M&L for SPN DB double door 8 way,IP 43 for mounting MCBs/SPNS ,CRCA sheet not less than 1.2 mm thick ,neutral link200 Amps rated copper bus bar,flush to wall/ fixed on surface with proper arrangementcomplete all as specified and directed. |
| 155 | S&F sheet metal enclosure for DB SPN 4 way with 200 Amp rated bus bar 415 Volts,double door suitable for housing MCBs and isolators complete all as specified. |
| 156 | S&F sheet metal enclosure for DB SPN 12 way with 200 Amp rated bus bar 240 Volts, Double door suitable for housing MCBs and isolators complete all as specified and directed |
| 157 | Supply and fixing miniature circuit breaker (MCB) of 4 pole current carrying capacity 32 to 63 Amps Amp, 240V, 10 KA \"B\" curve type, fixing in the MCB DB complete with connection testing and commissioning complete all as specified. |
| 158 | S&F sheet metal enclosure for DB SPN 6 way with 200 Amp rated bus bar 240 Volts, Double door suitable for housing MCBs and isolators complete all as specified and directed |
| 159 | Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, 240V, 10 KA \"B\" curve type,fixingin the MCB DBcomplete all as specified. |
| 160 | Supply and fixing miniature circuit breaker (MCB) SPN 32 to 63 Amp, 240V, 10 KA \"B\" curve type, fixing in the MCB DBcomplete all as specified. |
| 161 | Supply & fixingin repair industrial type SPN enclosure with a two pin and earth plug and socket including industrial plug 3 pin 20 Amp, complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall of fixed on surface of wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed . |
| 162 | Supply & fixingin repair industrial type SPN enclosure with a four pin and earth plug and socket ,including metal Top 5 pin 32 amp, complete with and including 32 amp four poleMCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall of fixed on surface of wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed . |
| 163 | Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed /surface conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existingand taking down the old unserviceable submain wiring of ant type complete all as specified & directed.Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length |
| 164 | Material and labour for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4 Sqmm for Phase and neutral + o1 single core cable of 4.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed /surface conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existingand taking down the old unserviceable submain wiring of ant type complete all as specified & directed.Note - One meter of conduit along with 2x4.0 Sqmm wire and one 4.0 sqmm earth wire shall be measured as one length. |
| 165 | Material and labour for sub main wiring with 4x2.5 Sqmm nominal cross sectional area (4 single core cable of 2.5 Sqmm for Phase and neutral + o1 single core cable of 4.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 2.5.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed /surface conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existingand taking down the old unserviceable submain wiring of ant type complete all as specified & directed.Note -4 meter of conduit along with 4x2.5.0 Sqmm wire and one 2.5 sqmm earth wire shall be measured as one length. |
| 166 | Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. |
| 167 | Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. |
| 168 | Excavationin trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft/ loose soil and geting outcomplete all as specified and directed. |
| 169 | Material and labour for sand cushioningwith dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed. |
| 170 | Material and labour for contineous brick edging withwidth equal to the depth of the brick of whole sub class \"B\" bricks laid on edge complete all as specified and directed. |
| 171 | Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in 25mm thick layer complete all as specified and as specified. |
| 172 | Removal of surplus excavated soil to a distance exc50 m but not exc in 100 m and deposited wher directedat a leveln exc 50 m above the starting point complete all as specified. |
| 173 | Supply / laying and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. |
| 174 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick, buried directly in ground (earth pitnot less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, conneted to galvanised earth wire 4.0 mm dia by means of bolts, nuts, cheek nuts and washers of galvanised oriron protected by 15 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm dia deformed bar @ 5 cmc/c with one handle for lifitting made out of 8 mm dia MS bar, funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009. |
| 175 | Taking down exhaust fan of any size from existing position, dismantling, overhauling and cleaning throughly, oiling/greasing and re- assemble after replacing unsv parts etc and rehanging the same duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified.Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below. |
| 176 | M&L for taking out burnt copper winding from exhaust fan of any size/type and rewinding with existing /same guage of super enammeled copper wire complete all as specified. |
| 177 | Taking down and servicingceiling fan from existing position, dismantling, overhauling and cleaning throughly, oiling /greasing and re- assemble after replacing split pins, check nuts, rubber seal etc and rehanging at same or new locations duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified.Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below. |
| 178 | M&L for taking out burnt copper winding from ceiling fan of 1200 mm size and rewinding with existing /same guage of super enammeled copper winding wire complete all as specified. |
| 179 | Supply only Ball bearing for Ceilingfan after and including taking down old ball bearing complete all as reqd at site, specified. |
| 180 | Supply and Fix ceiling fan hook all as specified and directed. |
| 181 | Supply and fix copper wire .75 sqm , 3 core multistranded all as specified and directed. |
| 182 | Supply and fixing LED luminaire 190 mmdia, 28 mm height panel warm white, 24 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver,suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified. |
| 183 | Supply and fixing Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LEDlamp B22 base complete all as specified and directed |
| 184 | Supply and fixinf post Top Lantern 25 wattt ,IP 65 including all accessories ti fixingall as specified and directed. |
| 185 | Supply and fixinf post Top Lantern 15 wattt ,IP 65 including all accessories ti fixingall as specified and directed. |
| 186 | Supply and fixing LED 12 wattpanel square shape recesses typeSlim, compact, auminum die cast edge lit panel. Recess mounted square fixture with opal diffuser and separate electronic driver complete all as specified and directed |
| 187 | Note : Tenderers may note that amount of credit Rs 1,05,380.05 will be deducted from the total amount arrived, at the time of Acceptance of contract. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
