Tender For Open Gym Equipments Supply And Establishment Gp Bagol, Rajsamand-Rajasthan

Tender For Open Gym Equipments Supply And Establishment Gp Bagol-1.0 Pull Chairi Push chair 1 Providing and fixing of Pull Chair/Push chair of size not less than Dimension (LxWxH) 1800 x 700 x 1800 mm. 2. The main structure frame shall be made from Fabricated with main post of NB 100mm (G1) B Class Pipe of approved make. 3. Seat main frame of NB 50mm (G1) B Class Pipe, Pipe connecting main post with handie frame of NB 65mm (G1) B Class Pipe 4. Handle frame of NB 32mm and NB 25mm (G1) B Class Pipe 5. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints 8 All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs: 7. Zinc primer paint is applied at all the welding points prior to finishing 8 Handle bars are provided with high end quality rubber grips & Base plate cover made of virgin LLDPE plastic by rotabonal malaing with 4.00mm thickness. UV resistant and colored 10 Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness colored. UV resistant and environmental friendly 11 Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12 The equipment are fitted with inbuilt limiters to prevent unwanted movemems 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped wised bolts of 18mm thickness 14 Once the concrete is set the equipment is fixed on to it and nuts and bolts are covered with base plate cover 15. High tensile steel wi th galvanized nut bolts are used for assembly 16 Equipment made to EN 16630 & DIN 79000 International standard for outdoor fitness equipment 17 Self-Explanatory stainless steel label fixed on equipment for ease of use 18 Pipe and sheet components should be cut by laser machine having CNC made components welded with robotic welding Pull Chair Developing the strength of upper imbs and the muscle groups of shoulder region and back, improving the agility and flexibility, coordination of shoulder joints and elbows Good for healing actives in joints and the bending and stretching hindrances of joints Push Chair Developing strength of upper limbs, chest and muscle groups of shoulder and back improving the flexibility and stability of shoulder joints and elbows. Good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc cement concrete to hold the whole structure, under the directions of Engineer-in-charge 0 3 in 1 Combination of Sit Up / Standing Twister/Arm Wheel1. Providing and fixing of Pull Chair/Push chair of size not less than Dimension (LxWxH): 1500 x 2200 x 1050 mm. 2. Themain structure frame shall be made from Fabricated with main post of nominal bore 100mm (G.I.) B Class Pipe of approved make 3 For Arm Wheel: Wheel frame of NB 32mm with connecting spokes of NB 25mm, Pipe connecting main pilar with wheel frame of NB 50mm (GI) B Class Pipe. 4. For Twister. Handle Main frame of NB 32mm & spokes of NB 25mm (G.1.) B Class Pipe. Perforated MS Sheet for Back Support. 5. For Sit Up: Main frame of NB 25mm & Leg support of NB 65mm (GI) B Class Pipe. 6 All Pipes shall be powder coated with 80-120 micron thick AkzoNobel or equivalent Paints 7. All joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off emoving sharp edges and burrs. 8. Zinc primer paint shall be applied at all the welding points prior to finishing. 9. Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness. UV resistant and coloured. 10. Maintenance free bearings of SKF or equivalent make duly oil sealed and selflubricated shall be used in the equipment manufactured. 11. The equipment shall be fixed on ground with concrete of minimum strength M-20 and J shaped welded bolts made of 18mm thickness. 12. Once the concrete is set the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 13. High tensile steel with galvanized nut bolts shall be used for assembly. 14. Equipment made to EN16630 & DIN79000 International standard for outdoor fitness equipment. 15. Self-Explanatory stainless staal jahal shall ha fixad on aquipment for ease of usa 16 Ring and shaat 1. Providing and fixing of Leg press /Exercising Bar of size not less than Dimension (LxWxH) 1900 x 550 x 1750 mm. 2. Fabricated with main post of nominal bore 100mm (G.1) B Class Pipe of approved make 3 Leg Press Seat Main frame of NB 50mm (G.I.) B Class Pipe and Pipe connecting main post to seat main frame of NB 65mm (G.1) B Class Pipe 4. Main frame for Exercising Bar of NB 32mm (G.I.) B Class Pipe. 5. All Pipes shall be powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs 7. Zinc primer paint shall be applied at all the welding points prior to finishing 8 Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured 9 Foothold for Leg Press made of nominal bore 50mm (GI) B Class Pipe. 10 Seats made up from virgin LLDPE manufactured by rotational moulding with 4.00 mm thickness, coloured, UV resistant and environmental friendly 11 Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated shall be used in the equipment manufactured. 12. The equipment shall be fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment shall be fixed on ground with concrete of minimum strength M-20 and J shaped welded bolts made of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15 High tensile steel with galvanized nut bolts shall be used for assembly. 16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment 17. Self- Explanatory stainless steel label shall be fixed on equipment for ease of use 18. Pipe and sheet components should be cut by laser machine having CNC made components wolded with robotic welding Exercise Bar Developing upper limbs, shoulders and chest strength, and improving the cardio-pulmonary function. Leg Press strength of lower limbs, and improving the stability and agility of the three main joints of lower limbs, Good for the healing Developing the of muscle atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone etc. without the inconvenience of bending and stretching the lower limbs L.Providing and fixing of Horse Rider/Air Swimy of size not less than Dimensions (LxWxH): 1500 x 900 x 1100 mm. 2 Fabricated with mam post of NB 100mm (G.L.) B Class Pipe of approved make 3 Horse Rider Mam frame of NB 65mm (G1) W Class Pipe. Handle support frame of NB Sünim and other pipes of NB 32mmn & NB 25mm (G.L.) B Class Pipe 4 Air Swing Leg Support frame of NB 50mm (6.1) B Class Pipe, Handle support frame of NB 32mm & NH 25mm (61B Class Pipe (NB stands for Nominal Hore ie, Internal Diameter of pipe in millimeters) 5. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs 7. Zine pomer paint is apphed at all the welding points prior to finishing & Base plate cover made of virgin LDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored 9. Foothold for forse Rider made of NB 32mm (G1) TB Class Pipe. 10 Foothold for Air Swing made of MS Sheet Metal with rounded edges to revent unpact and injury Seat to be made up from virgan LLDPE manufactured by rotational molding with 00 mm thickness, colored, JV resistant and environmental friendly. 11. Maintenance free trearings of SKF er equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured 12. The equipment are titted with mholt hauters to revent unwanted movements 13 The equipment is fixed on ground with concrete of nummuan strength M 5 and J shaped welded bolts of 18mm thickness 14 Once the concrete is set, the equipment is fixed on ta and nuts and bolts are covered with base plate cover. 15 High tensile steel with galvamzed nut bolts etc

Refer document

INR 2.50 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB