Construction Of Collection Centre 210 Sq.Mtr- 1 Construction Of Collection Centre 210 SQ.MTR. 2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murumincluding removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.0 to 1.5 m.) By Manual MeansSSR - I.No./P.No.- 21.01/153 Spec.No. Bd A 1 P No. 259 3 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR - I.No./P.No.- 24.01/175 Spec.No. Bd E1 P No. 287 4 Providing and laying in situ/Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailingout water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)SSR - I.No./P.No.- 25.11/177 Spec.No. Bd F3/7 P No. 298/18 5 Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth andeven surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)SSR - I.No./P.No.- 25.31/179 Spec.No. Bd F5/7 P No. 300/38 6 Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)SSR - I.No./P.No.- 25.50/181 Spec.No. Bd F6/7 P No. 300/38 7 Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in plinth foundations and plinth of inner walls / in plinth external wallsincluding bailing out water manually, strikingjoints, raking out joints and watering etc Complete.SSR - I.No./P.No.- 27.01/197 Spec.No. Bd G 1 P No. 313 8 Filling in plinth and floors with contractors soil sand or murum in 15 cm to 20cm, layers including watering and compaction complete.SSR - I.No./P.No.- 21.37/157 Spec.No. Bd A11 P No. 263 9 Providing second class Burnt Brick masonry with onventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding Complete.SSR - I.No./P.No.- 27.05/197 Spec.No. Bd G 5 P No. 315 10 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR - I.No./P.No.- 26.33/188 Spec.No. Bd F17 P No. 306 11 Providing and fabricating structural steel work in rolled sections like joists, channels, angles,tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.SSR - I.No./P.No.- 23.01/173 Spec.No. Bd C2 P No. 275 12 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc.complete.(Weight of 5.5 Kilogram/sq.m.). SSR - I.No./P.No.- 38.04/233 Spec.No. Bd R5P No. 453 13 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or bricksurfaces, in all positions including scaffolding and curing etc. complete. SSR - I.No./P.No.- 32.03/209 Spec.No. Bd L2 P No. 368 14 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.SSR - I.No./P.No.- 32.15/210 Spec.No. Bd L10 P No. 370 15 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.SSR - I.No./P.No.- 32.11/153 Spec.No. Bd L7 P No. 369 16 Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compactin, filling joints, marking lines to give the appearance of tiles of 30cmx30cm or other size laid diagonally/square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed SandSSR- I.No./P.No.-33.10/214 Spec.No. As directed by Engineer Incharge 17 Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete.SSR - I.No./P.No.- 33.04/156 Spec.No. Bd M 3 P No. 380 18 Providing and laying ceramic tiles of having size 30cm.x30cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.SSR - I.No./P.No.- 33.25/158 Spec.No. Bd M13 P No. 386 19 Providing and fixing M.S.grill door 24 Kilogram / One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etcSSR - I.No./P.No.- 39.31/250 Spec.No. As directed by Engineer Incharge 20 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35x3x5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300x300x3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear weels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)SSR - I.No./P.No.- 39.24/248 Spec.No. Bd T55 P No. 510 21 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hotdip zinc coating including fabricating glazing wth plain/obscured glass panes 5mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete.SSR - I.No./P.No.- 39.29/182 Spec.No. Bd T 53 P No. 509 22 Providing and fixing weld mesh jali 25 x 25 mm square of wire inM.S.Angles (25mmx25mmx4mm) frameand painting the M.S.Angles with one coat of red lead primer and two coats of painting etc. complete. 23 Providing and fixing heavy duty interlocking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram /Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. completeSSR -I.No./P.No.-33.51/218 Spec.No. As directed by Engineer Incharge 24 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box SSR -I.No./P.No.-39.40/184 Spec.No.As directed by Engineer Incharge 25 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete SSR - I.No./P.No.- 35.13/224 Spec.No. Bd O 8 P No. 406 26 Providing & applying washable oilbound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.SSR - I.No./P.No.- 36.11/227 Spec.No. Bd P5 P No. 513 27 Providing and fixing orissa typewhite glazed earthenware 575 mm Water closet pan 580 mm dia including p or s trap eartware foot rests,cast iron soil and vent pipe uptothe outside fase of the wall 1;2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.SSR - I.No./P.No.- 42.30/202 Spec.No. Bd U1 P No. 537 28 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. P 269 / S.No.1422 29 Providing and fixing on walls/ ceiling/ floor 15 mm dia. UPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. P 268 / S.No.1420 30 Providing, laying & fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. P 265 / S.No.1392 31 Providing, laying & fixing P.V.C. pipe of 110 mm. dia. With fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete P 265 / S.No.1393 32 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. P 258 / S.No.1328 33 Providing and fixing 10 cm PVC nahani trap with grating etc. complete.P 270 / S.No.1432 34 Providing and fixing 100 mm dia stabilizer pipe /P.V.C. soil vent / waste pipe and with necessary fitting such as bends , tees, single junctions, double junctions, slotted vent, clamps etc complete. P 268 / S.No.1417 35 Providing and constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, BrickMasonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. P 264/ S.No.1377 36 Providing and fixing hume pipe septic tank 900 mm diameter with vent pipe and cap including necessary (including excavation and laying) P 264 / S.No.1383 37 Providing soak pit of size 120 cm x 120 cm x 120 cm including excavating and filling with brick-bats. P 264 / S.No.1384 38 ROYALTY 39 for Hard Murum & other Minerals 40 MATERIALS LAB TESTS 41 Fineness Modulus ( Sieve Analysis ),Silt & Clay Content 42 Water Absorption , Compressive Strength, Efflorescence (Set of 5 Bricks}. 43 Concrete Mix Design M-20 (With all Tests on basic materials) 44 Compressive Strength OF C.C. Cube (Set of 3 cubes). 45 Murum Test 46 TMT Steel test6mm,10mm,12mm,16mm 47 ESHS Compliance 48 Management Strategies andImplementation Plan (MSIP) to manage Environmental, Social , Health and Safety (ESHS) Risk and ESHS Code of Conduct
