|
| 1 | Filling tiles joint portion of flooring and dado filling with white cement by removing existing loose morter/ cement slurry from joint with tools and finish with washing cleaning and curing etc.complete.As directed by Engineer in charge.SSR OF 2022-23 ITEM NO. 46.56 & PAGE NO.300 BASIC RATE |
| 2 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc. complete. As directed by Engineer in chargeSSR OF 2022-23 ITEM NO. 46.13 & PAGE NO.296 BASIC RATE |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork,coverblocks, laying/pumping, compacting , curing,finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade f) Bd.F.11 Page No. 304 and B.7, Page No. 38SSR OF 2022-23 ITEM NO. 26.17 & PAGE NO.185RATE ANALYSIS |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork,coverblocks, laying/pumping, compacting , curing,finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fineaggregate (Crushed sand VSI Grade f)Bd.F.11 Page No. 304 and B.7, Page No. 38 SSR OF 2022-23 ITEM NO. 26.17 & PAGE NO.185 RATE ANALYSIS |
| 5 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. |
| 6 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Bd.F.17, Page No. 306 SSR OF 2022-23 ITEM NO. 26.33 & PAGE NO.188 RATE ANALYSIS |
| 7 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Bd.C.2 Page No. 275 SSR OF 2022-23 ITEM NO. 23.01 & PAGE NO.173 BASIC RATE |
| 8 | Providing, laying and fixing P.V.C. pipe of 110mm. dia. with fittings such as bends, tees,reducers,clamps,etc.includingnecessaryexcavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 42.28 & PAGE NO.277 |
| 9 | Providing and fixing double scaffolding system(cuplocktype)ontheexteriorsideofbuilding/structure, including additional rows ofscaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubesjoint with cup & lock system with M.S. Tubes, M.S.tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the buildingetc, wherever required, if feasible, for inspectionof work at required locations with essential safetyfeatures for the workmen etc., complete as perdirections and approval of Engineer-in-charge.Note:- (1) The elevational area of the scaffoldingshall be measured for payment purpose. (2) Thepayment will be made once only for execution ofall items for such works.As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 46.42 & PAGE NO.299 BASIC RATE |
| 10 | Providing structural steel work of rectangularhollow steel section for steel trusses, othersimilar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.As directed by Engineer in Charge. SSR OF 2022-23 ITEM NO. 23.11 & PAGE NO.174 BASIC RATE |
| 11 | Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) 900 mm girth (Surface Width).As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 38.36 & PAGE NO.237 BASIC RATE |
| 12 | Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank).Bd. R. 10, Page No. 455SSR OF 2022-23 ITEM NO. 38.08 & PAGE NO.233 BASIC RATE |
| 13 | Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excludingBd.O.5 Page No. 405 SSR OF 2022-23 ITEM NO. 35.07 & PAGE NO.223 BASIC RATE |
| 14 | Supplying, erecting, testing and commissioning of minimum three & above starrated centrifugal water pump (monoblock), 415V, three phase, 50 Hz, A.C. supply of 2.25 kW/ 3 HP with discharge 720/165 lpm for head of 12/26 m and 65 mm suction/50 mm delivery pipe on provided CC foundation as perspecification no. WP-CGP. |
| 15 | Supplying, erecting, testing and commissioning of minimum three & above starrated centrifugal water pump (monoblock), 415V, three phase, 50 Hz, A.C. supply of 2.25 kW/ 3 HP with discharge 720/165 lpm for head of 12/26 m and 65 mm suction/50 mm delivery pipe on provided CC foundation as perspecification no. WP-CGP CSR ITEM NO. 12.1.6 & PAGE NO.166 BASIC RATE |
| 16 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.Bd. M.22 B/Page No. 390 SSR OF 2022-23 ITEM NO. 33.35 & PAGE NO.216 RATE ANALYSIS |
| 17 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.BD.V 5 page 551 and as directed by Engineer in charge SSR OF 2022-23 ITEM NO. 42.55 & PAGE NO.280 BASIC RATE |
| 18 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.BD.V 5 page 551 and as directed by Engineer in charge SSR OF 2022-23 ITEM NO. 42.57 & PAGE NO.280 |
| 19 | Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipalrequirements etc. complete.As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 42.36 & PAGE NO.277 BASIC RATE |
| 20 | 20 Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipalrequirement etc. complete.As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 42.37 & PAGE NO.277 BASIC RATE |
| 21 | 21 Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.MORTH 305 SSR OF 2022-23 ITEM NO. 2.25 & PAGE NO.24 |
| 22 | Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm(2+1E) FRLSH grade copper wire,flush type switch, earthing and requiredaccessories as per specification no. WG-PW/SWSoR-2025 ITEM NO. 1.7.1 & PAGE NO.BASIC RATE |
| 23 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR OF 2022-23 ITEM NO. 27.05 & PAGE NO.197 RATE ANALYSIS |
| 24 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete SSR OF 2022-23 ITEM NO. 32.11 & PAGE NO.209 |
| 25 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour tothe plastered surfacesincluding cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary As directed by Engineer in charge. |
| 26 | Providing and fixing 3 mm thick ACP Pannel Name Board As per given Matter as Design and As directed by Engineer In charge ( as per approved rate) |
| 27 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade )Bd.F.3 Page No. 298 and B.7, Page No.38SSR OF 2022-23 ITEM NO. 25.11 & PAGE NO.178RATE ANALYSIS |
| 28 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate ( Crushed sandBd.F.8 Page No. 302 and B.7, Page No.38SSR OF 2022-23 ITEM NO. 25.7 & PAGE NO.182RATE ANALYSIS |
| 29 | ROYALTY CHARGES :- Supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates.[As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.146 Dt.04 June,2021. States that the royalty charges of Rs.211.95/Cu.M. ) are considered. Thesurcharge levied on Royalty shall also be payableE DSR ITEM NO. ... & PAGE NO....ROYALTY CHARGES FOR SANDROYALTY CHARGES FOR OTHER MINERALS |
| 30 | Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender. testing of material by Quality control and certified quality must be use by contractor. CONCRETE |
| 31 | Compressive strength of C.C.Cube (Set of 3 cubes) Steel bar testing up to 16mm |
