|
| 1 | BUILDING STRUCTURE |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m.beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering Including shoring and strutting etc. complete. (LIFT UPTO 1.5 M.) By Mechanical Means WareHouse :164.70 Machine Shed : 21.60 Total: |
| 3 | Excavation for foundation in earth, soil of all types, sand, gravel, and soft murum, including removing the excavated material up to a distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting, etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means. WareHouse : 164.70Machine Shed :25.92 Total : |
| 4 | Providing soling using 80mm size trap metal in 15cm layer including filling voids with crushed sand/grit, ramming, watering, etc. complete.WareHouse :139.03 Machine Shed : 15.30Total : |
| 5 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layersincluding watering and compacting etc. complete.) WareHouse : 233.92Machine Shed : 00 Total :233.92 |
| 6 | Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc.complete.WareHouse :397.85Machine Shed : 61.20Total : |
| 7 | Providing pre-constructional anti-termite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorpyrifos per one square metre of vertical surface area covering 10 years guarantee on bond paperWareHouse : 828.30 Machine Shed :0.00Total : |
| 8 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete ,with fully automatic microprocess or base dPLCwith SCADA enable dreversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) WareHouse : 65.69Machine Shed : 2.16Total : |
| 9 | Providing and laying in situ cement concrete of M-20 grade of trap / granite/quartzite/gneiss metal for R.C.C. worklike raft, grillages, strips, foundations and footings of R.C.C.columns and steel stanchions including bailing-out water manually, including centering formwork of plywood / steel, compaction, covering newly laid concrete by gunny bag, plastic or tarpaulin, finishing the formed surface with cement morter 1:3 of sufficient minimum thickness to give a smooth and even surface or rougheningif special finish is to be provided and curing etc complete. (Excludingreinforcement) The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Wooden planks / shuttering will not be allowed) Spec.No.:Bd.F.2 Page No. 298 /IS 456 (1978) WareHouse : 45.37Machine Shed : 06.48Total : |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) WareHouse : 29.09 Machine Shed : 4.37 Total : |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) WareHouse :21.80 Machine Shed : 6.98 Total : |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete in M-15 of trap / granite/gneiss/ quartzite metal for R.C.C. COPING of required thickness in positionas shown on the drawings or as directed by Engineer -in-charge including steel centering, plywood / steel form work, steel props, laying/ pumping, compaction ,finishing uneven and honey combed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarp aulin etc. with fully automatic microprocess or based PLC with SCADA enable dreversible Drum Type mixer/ concrete Batchmix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)WareHouse :2.14 Machine Shed :0.00Total : |
| 13 | Providing and casting in situ cement concrete of M-20 grade of trap granite / quartzite / gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings or as directed including fixing plastic cover block of requird size at 27 Nos in per 10 Sqm to reinforcement to give a clear cover of 15mm in RCC slabs, fixing fan hook box of 100mm diameter PVC or MS material with required depth with holes or notches as required, bottom with 12mm diameter M.S. bar bend to shape with hooked ends for fan hook and painting to exposed surface, centering, formwork of steel, compaction, covering newly laid concrete by gunny bag, plastic or tarpaulin, finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Wooden planks / shuttering will not be allowed). Bd.F.8 Page No. 302 / IS 456:2000 WareHouse : 3.24Machine Shed : 0.00 Total : |
| 14 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.WareHouse :11.21Machine Shed :1.38 Total : |
| 15 | Providing Brick masonry in cement mortal 1.6 using second Class Burnt Bricks in foundation and plinth of inner walls/ in plinth of external wallsincluding bailing out water manually, striking joints on unexposed faces ,watering and scaffolding complete Bd. G. 1, Page No.313, WareHouse : 10.83 Machine Shed : 5.94 Total : |
| 16 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. WareHouse : 51.37 Machine Shed :21.82Total : |
| 17 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.WareHouse : 399.84 Machine Shed : 177.84Total : |
| 18 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing, etc. complete.WareHouse : 261.06Machine Shed :126.76Total : |
| 19 | Providing and applying white-wash in one coat on old/ new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.WareHouse : 261.06Machine Shed : 00.00Total : |
| 20 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete.WareHouse : 399.84Machine Shed :00.00Total : |
| 21 | Providing and fixing steel ventilator fully glazed, partly fixed as per detailed drawing, with hot-dip zinc coating, including fabricating glazing with plain/obscured glass panes 5mm thick and approved type quality, and iron oxidized fixtures and fastening with guard square bars 12 mm, 10 cm c/c, and oil painting 2 coats, etc. Complete.WareHouse : 6.41 Machine Shed :7.68Total : |
| 22 | Providing and fixing rolling shutter fabricated from steell at hsofminimum thickness 0.9mm with lock plate of 3.15 mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S.channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fastarr angements, M.S.Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of M.S. sheet not less than 0.9mm thickness and of any size attopand safety device sincluding mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade castir on or mild steel and one coat of redlead primer etc. complete.(I.S.62481979) (Without mechanical gear) WareHouse :19.20 Machine Shed :9.30Total : |
| 23 | Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumenetc. complete.WareHouse : 530.46 Machine Shed : 102.00 Total:632.46 |
| 24 | Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing, including hinges, pivot block, locking arrangement, welding, riveting, and oil painting of three coats of approved shade. Weight of gate: 35 Kilogram/Square Meter.WareHouse : 10.08Machine Shed :00.00 Total : |
| 25 | ROAD Excavation For Roadway In Earth, Soil Of All Sorts,Sand, Gravel Or Soft Murum Including Dressing Section To The Required Grade, Camber And Side Slopes And Conveying The Excavated Materials With All Lifts Upto A Lead Of 50m. And Spreading For Embankment Or Stacking As Directed. |
| 26 | Providing Earth Work In Embankment with approvedMaterials obtainede from other sources upto lead of 50 m including all lifts,laying in layers of 20 cm to 30 cm thickness breaing clods ,dressing to the required lines , curves,grades & section , watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc.complete .( Material obtained from departmental land.) |
| 27 | Supplying hard murum/ kankar at the road site,including conveying and stacking complete. |
| 28 | Spreading Hard Murum/ Soft Murrum/Gravel Or Kankar For Side Width Complete . |
| 29 | Compacting The Hard Murum Side Widths Including Laying In Layers On Each Side With Vibratory Roller Including Artificial Watering Etc. |
| 30 | Providing,laying,spreading and compacting stone aggregate of specific sizes to water bound mecadam specification including spreading in uniform thickness ,hand packing to proper grade and camber , applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate ,watering and compacting with vibratory roller to the required density By Mechanical Means – Grading 1 ( Using Screening Type B ( 11.2 mm ) Aggregate).ITEM NO.3.19 |
| 31 | Providing,laying,spreading and compacting stone aggregate of specific sizes to water bound mecadam specification including spreading in uniform thickness ,hand packing to proper grade and camber , applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate ,watering and compacting with vibratory roller to the required density By Mechanical Means – Grading II( Using Screening Type B ( 11.2 mm ) Aggregate).ITEM NO.3.20 |
| 32 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates)ITEM NO.3.03. |
| 33 | Providingandconstructing75mm.thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existingroadsurface,spreading40mm. stone metallayers100%crusher brokenmetalwith conicalcrusherplantheatingand sprayingthe bitumenofspecifiedgrade@2 Kilogram/SquareMetre,spreading 12mm.sizechipscompactingwiththreewheelstatierollerQty Same vide Item No.8 |
| 34 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates)ITEM NO.4.12 Qty same vide Item No. 8 |
| 35 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified gradepreparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates)ITEM NO.4.01Qty same vide Item No. 8 |
| 36 | PEB StructureStructural Steel E-350 ( JSW make) |
| 37 | Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting,straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins,platforms, ladders, monorails, staircases ,supports, strengthening of steel membersetc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings includingpainting as per G4/G5/G6 before erection and all materials and labour charges etc., complete andincluding Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts,nuts, washers, welding and electrodes required for the complete work).WareHouse : 16.58Machine Shed :00Total : 30.68 |
| 38 | Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hot-dip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates, transporting,straightening, cleaning, fabricating and erecting in position. WareHouse : 9.00Machine Shed :Total : 9.00 |
| 39 | Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories.(Essar) Make)WareHouse :6.63Machine Shed :Total : |
| 40 | Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer in charge.WareHouse :130.38.00 Machine Shed :0.00Total : 130.380 |
| 41 | Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc., complete and as directed as per engineer inchargeWareHouse : 50.52Machine Shed :Total: 50.52 |
| 42 | Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge WareHouse :78 Machine Shed :Total : 78 |
| 43 | Supply & Fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF - 600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of 2mm thk clear 1.020mtr wide & 1.7 mtr long. WareHouse :8 Machine Shed : 3 Total : 11 |
| 44 | Supply & fixing of 2mm thk polycarbonate sheet as per drawing & as directed by engineer in chargeWareHouse :30.72 Machine Shed :Total : 30.72 |
| 45 | Supplying, fabricating, erecting and fixing in position of steel Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anti corrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. WareHouse :0.00 Machine Shed : 3.5 Total : 3.5 |
| 46 | Providing and fixing colour coated Zincalume (R) AZ 150 (min150 gms /sq.mt. total on each side) profiled sheets for roofing. The feed materialis manufactured out of nominal 0.45mm Base Metal Thickness (BMT) (0.5mm TCT), Hi-strength steel with min. 550 MP a yield strength, metallic hot dip coated with Aluminium- Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLOR BOND (R) steel quality super durable polyester paint coat (with in organic pigment). The paint shall have a total coating thickness of nominal 35um, comprising of nominal 25 um exterior coat on top surface and nominal 10um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtles quare flutingin the five panat nominal 180-250 mm center-to-center. The endrib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25um Zinc-Tinalloy coated, Hexhead, self-drilling screw etc. complete. (weight of profile 4.52Kilogram / SquareMetre ). WareHouse :0.00 Machine Shed : 453.93Total : 453.93 |
| 47 | Providing and fixing metacolor ,epoxy coating to match G.I Sheeting og 22 BWG ( 1 mm) over the ridge , hip pr va;;eu for meta color corrugated epoxy sheet roofing including fastening with G.I screw and bolt and lead and butumen washer etc. complete. WareHouse :0.00 Machine Shed :17.46 otal : 17.46 |
| 48 | ELECTRIFICATION |
| 49 | supplying and ereating armoured cables 3 core 6sq.mm in trenchwall. |
| 50 | supplying and ereating armoured cables 3 core 10 sq.mm in trenchwall. |
| 51 | making the trench in soil |
| 52 | making the trench in murrum and had rock |
| 53 | Supplying and laying 75mm dia G.I pipe (B)GRADE |
| 54 | Supplying and laying 25mm dia G.I pipe (A)GRADE |
| 55 | Supplying,erectingheavy duty flange cableglanded2 to 4 core 2.50sq.mm/2 to 4 core 4 sq.mm |
| 56 | p point wiring for street light 3 core 1.5 sq.mm |
| 57 | Supplying&erecting water proof powder coated distrubution board 4 way 2x6 Amp. S P MCB |
| 58 | S&E with mains PVC unarmourde cable 3 core2.5 sq.mm |
| 59 | Supplying and eracting and markiting MCB of doubled pole0 16 amp. |
| 60 | suppliying shockproof type hand lamp |
| 61 | supplying and ereating LED street light fittingsuitable for 20to 25 w, including street light |
| 62 | supplying and ereating GI earth plate |
| 63 | S&E sheet metal one way enclouse for mcb |
| 64 | point wiring for light bells with 2- 1.5 sqmm PVC insulatted wire |
| 65 | point wiring for independent plug with 2-1.5 sqmm. PVC insulleted wire |
| 66 | point wiring with2-1.5 sqmm. PVC insulleted wire |
| 67 | S&F CFL lamp 11W |
| 68 | supplying and ereating marine plywood 19mm |
| 69 | P & F MS boxes of 16 swg |
| 70 | supplying and ereating redy to use retrofit 18 LED 18-20 TUBELIGHT with poly caarbonate body, hat sink, integrated hf electronic driver complete and competiable to T8/T12 LED |
| 71 | S & E ceiling fan 48\" with step diamer |
| 72 | supplying and ereating four pole insulater onlyswith versin of MCB of 40 amp |
| 73 | S & E 40mm dia GI pipe 2.5M length of earthplate |
| 74 | P & F cover made of wire mesh jali |
| 75 | S & E ding dong type call beel |
| 76 | S & E 4\"x4\" epoxy coated 3 way jinction box |
| 77 | S & E steel tabular swaged pole 139.7x114.3x88.9 mm dia. |
| 78 | ROYALTY CHARGES |
| 79 | Royalty for Sand |
| 80 | Royalty for murum and Other material |
| 81 | QUALITY CONTROL & LAB TESTING |
| 82 | M20 CONCRETE: Concrete Mix Design (With all Tests onbasic materials) |
| 83 | M20 CONCRETE: Compressive Strength OF C.C. Cube (Set of 3 |
| 84 | M15 CONCRETE: Compressive Strength OF C.C. Cube (Set of 3 |
| 85 | M10 CONCRETE: Compressive Strength OF C.C. Cube (Set of 3 cubes). |
| 86 | BRICKS :Water Absorption (Set of 5 Bricks), Compressive strength (Set of 5 Bricks),Efflorescence (Set of 5 Bricks) |
| 87 | TMT STEEL :(Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test,Proof Stress.) |
| 88 | Sand :- i) Fineness Modulus, II) Silt content |
| 89 | Murum :- ii) Atterberg Limit iii) Density of compacted layeriv) Proctor Test |
| 90 | Bitumen Penetration, Softening Point, Flash & Fire Point, Specific Gravity, Viscosity. |
| 91 | Crushing Value/Compressive Strength,Water Absorption & Specific Gravity, |
| 92 | Cement Test i) Comprecive strengh ii) Intital and final setting time iii)Spcific Gravity iv) Spicific Gravity v) soundness vi) Finess |
| 93 | METAL Gr I & Gr II AgrregatesAIV Test, Gradation,Water Absorpation Test,Crushing Value |
| 94 | Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct |
