Providing, Internal Amenities For Panchayat Samiti Ao Building, B And C Icds And Rest House, At Mangalwedha As Above= 1 Partition Full Height Providing & fixing wall partition made in 19+19 mm ply for frame work, 9 mm thick Ply finished with 1.00 mm laminate for all exterior sides with approved shade. 12 mm clear glass fixed on teak wood beading as per detailed drawing & design.TW lippingetc. complete. Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 2 Low height Partition Providing & fixing 75 mm thick Partition using 19+19 mm thick Plywood for Frame having 9 mm thick Plywood for both sides. Partition Should Finished with 1.00 mm thick laminate, 12 mm thick Clear glass, TW lipping and necessary fixtures to be provided as directed etc. complete. As per detailed drawing and design.Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 3 Storage(size 1.35 x2.15 mt.) Providing & fixing Storage using 19 mm Plywood for structure 9 mmPlywood for back. 25 mm thick Ply for door. Door should finish with 12 stainless steel handles& mortice locking arrangement. All exterior surfaces should finished with 1.00 mm laminate and internaly finished with 1mm thk. white laminate respectively. Depth of storage 0.45 mt. as per detailed drawing and design with all necessary fixtures and fastenings etc complete.Plywood MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical. (Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 4 Doors for Cabin Providing & Fixing sandwiched doors for Cabin using 19+12 mm thick ply. Both sides should finished with 1.00 mm thick laminate All exterior side faces should coverd with T.W. beading. Doors should have 6 mm thick clear glass,SS hinges, S.S.handle, Lock, Stopper and Hydraulicdoor closer etc. complete. As per detailed drawing and design.Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 5 Executive Table (Size 1.80 X 0.90 X 0.75 mt.) Providing & fixing Executive table of size 1.80 X 0.90 X 0.75 mt. using 25 mm thick Ply for top & 19+12 mm thick Ply for sides.Externally finished with 1mm thk laminate & internally with 1mm thk white laminaterespectively. Table should have side table of size 1.50 X 0.40 meter with drawers and doors, necessary locking arrangement, footrest, keyboard tray of size 485 X 180 mm, cable manger, SS hinges, SS handles & TW lippingetc. complete. As per detailed drawing and design.Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 6 Officer Table (size 1.50 x 0.75 x 0.75 mt.) Providing & fixing Officer table of size 1.50 X 0.75 X 0.75 mt. using 25 mm thick ply for top & 19mmthick ply for sides.Externally finished with 1mm thk laminate & internally with 1mm thk white laminaterespectively. Table should have side table of size 1.50 X 0.40 meter with drawers and doors, necessary locking arrangement, footrest, keyboard tray of size 485 X 180 mm, cable manger, SS hinges, SS handles & TW lippingetc. complete. As per detailed drawing and design.Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 7 Clerk / Staff Table (size 1.37 x 0.60 x 0.75 mt.) Providing & fixing Clerk / Staff table of size 1.37 X 0.60 X 0.75 mt. using 25 mm thick ply for top & 19mm thick ply for sides. Externally finished with 1mm thk laminate & internally with 1mm thk white laminaterespectively. Table should have side table of size 1.50 X 0.40 meter with drawers and doors, necessary locking arrangement, footrest, keyboard tray of size 485 X 180 mm, cable manger, SS hinges, SS handles & TW lippingetc. complete. As per detailed drawing and design.Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 8 Computer Table (size 1.20 x 0.60 x 0.75 mt.) Providing & fixing Computer table of size 1.20 X 0.60 X 0.75 mt. using 25 mm thick ply for top & 19 mm thick ply for sides.Externally finished with 1.00 mm thick laminate & internally with 1mm white laminate respectively. Table should have ebco keyboard of size 485 X 180 mm including necessary hardware,teak wood foot rest andLipping etc. complete. As per detailed drawing and design.Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 9 Providing and arrangemnt of high back chair, tilt mechanism with multilocking, high density cushion on seat, composite leather with metalic silver finish base and arms with polyurethene castors, gaslift for height adjustment. (Mangalwedha AO) 10 Executive Chairs Providing and arrangemnt of mid back chair, normal synchronized mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong nylon base with leather upholstery. (Mangalwedha AO) 11 Staff / Clerk Chairs Providing and arrangemnt of mid back chair, ECO CTS mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong P/Nylon base with fabric upholstery. (Mangalwedha AO) 12 Providing and fixing sofa set 3+1+1 brown and cream leather Dimensions - length 182.5 centimetre, breadth 100 centimetre, height 100 centimetre, weight - 66 kg. Seating capacity - five seat. (Mangalwedha AO) 13 Public Seating Chair 3 Seater Providing and fixing 3 seater public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. (Mangalwedha AO) 14 Providing and fixing of tea table 900 milimetre X 750 milimetre X 450 milimetre with 12 milimetre thick colour eitched tempered glass with bevelled drawing made out of 18 milimetre thick waterproof ply. The outer laces to be finished with high quality 4 milimetre thick veneer or 1 milimetre thick mica, excetra (Mangalwedha AO) 15 Meeting Table (A - Type ) Providing & fixing Meeting Table using 25 mm thick ply for table top & 19+19 mmthick ply for stucture. Externallycoverd with 1.00 mm thick laminate and internaly with 1.00 mm white laminate respectively. T.W.footrest to be provided with necessary hard were and T.w. lipping etc. Complete. As per details drawing and design. Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 16 Providing and fixing rollar blinds of approved make and shade of 38 milimetre round aluminium channel with blackout fabric and telting with chain (ball) system with all necessary fixtures and fitting, excetra complete. (Mangalwedha AO) 17 Shutters (0.90 x 2.17) Providing & fixing Shutters for existing in-built storage made in 19+19 mm ply frame work, 25 mm thick Plywood shutter finished with 1.00 mm laminate for all exterior sides with approved shade and internaly finished with 1 mm white laminate respectively using necessary hardware teakwood lipping. SS hinges,SS handles, etc. complete. As per detailed drawing and design.Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical.(Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 18 Providing and fixing frame work of galvanised iron for suspended false ceilling which includes galvanised iron perimetre channels of size 27 milimetre and 0.5 milimetre thick having one flange of 20 milimetre and another flange of 30 milimetre along with perimetre of the celling, fixing in brick wall / partition with the help of rawal plugs and screws, suspending galvanised iron intermediate channels of size 45 milimetre and 0.9 milimetre thick with two flanges of 15 milimetre each from the soffit at 1200 milimetre centres with steel galvanised iron hanger of width 25 milimetre X 0.5 milimetre fasteners, celling section of 0.5 milimetre thickness having curved wedge of 51.5 milimetre and two flanges of 26 milimetre each with lips of 10.5 milimetre fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel 450 milimetre centres, 12.5 milimetre dry wall screws at 230 milimetre centres, fixing screws mechanically either with screw driver or drilling machine with suitable attachment, excetra complete. (For Ground Floor) (Mangalwedha AO) 19 Providing and fixing false ceilling of 10 milimetre to 12 milimetre thick decorative boards of fibrous plaster of paris including scaffolding, if necessary, all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards, excetra complete. (excluding frame work, runners and mild steel supenders). (For Ground Floor) (Mangalwedha AO) 20 Paneling Providing & fixing wall paneling using 19 mm and 9 mm thick Plywood finished with 1.00 mm laminate for all exterior sides, with approved shade TW lippingetc. complete. As per detailed drawing and design.Plywood - MR Grade 100 %BWR IS 303 standards empowered with antitermite anti fungus chemical. (Before execution sample should be get approved from Engineer In charge) (Mangalwedha AO) 21 Providing and applying plaster / wall punning with Plaster of Paris (with Plaster of Paris material of approved make) in 10 milimetre to 13 milimetre thickness to previously plastered surface / or on new brick surface (excluding rough cast plaster) in all positions including preparing and finishing the surface, scaffolding, excetra complete. (For Ground Floor) (Mangalwedha AO) 22 Armstrong Flooring Providing, laying & pesting commercal grade 2.00 mm thick vinyal flooring of plank size 0.23x0.90 total weight 4 kg/sqm,wear layer thickness 200 micruns. Flooring should pest using adsive only Aro bond 44/fevical V.C. 31 etc, Complete.As directed by Engg. incharge. (Mangalwedha AO) 23 Providing and fixing of Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With 15 milimetre Exposed Grid. The tiles should have Humidity Resistance (RH) of 95 percent, NRC 0.9 - 1.0, Light Reflectance .85 percent, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 X 600 X 15mm , suitable for Green Building application, with Recycled content of 66 percent GW and 74 percent RW. The tile shall be laid on precoated G.I channel 32 with 15 milimetre wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 milimetre and 600 milimetre Cross Tees with a web height of 32 milimetre and a load carrying capacity of 7 Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476, excetra complete. (Mangalwedha AO) 24 Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below - Scrapping for surface with emery paper and wipe clean for area. Applying wall primer with brush by adding mineral turpentine oil by 8 to 10 percent or water by 15 to 20 percent allowing to dry for 6 to 8 hours. After applying approved make acrylic wall putty with appropriate proportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean. Applying paints Royale Luxury emulsion first coat with brush water content water 40 to 45 percent or 65 to 70 percent by role. Applying paints Royale luxury emulsion second coat with brush with water content 40 to 45 percent or 65 to 70 percent by roller. (With prior approval of S.E.) (For Ground Floor) (Mangalwedha AO) 25 Providing and applying one coat of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding if necessary, cleaning and preparing surface (excluding primer coat), excetra complete. (For Ground Floor) (Mangalwedha AO) 26 Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fiber glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 square metre per kilogram with two coats Using approved chemicals for masonry and concrete surface by brush, covering seven years gaurantee on stamp paper, excetra complete. (For Ground Floor) (Mangalwedha AO) 27 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts excetra complete. (Mangalwedha AO) 28 Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at one killogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding, excetra complete. (For Ground Floor) (using NATURAL SAND). (Mangalwedha AO) 29 Providing and fixing in position (as per Indian Standard 1868/1982) aluminium sliding window of two tracks with rectangular pipe having overall dimentsions 63.50 milimetre X 38.10 milimetre X 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 milimetre X 31.75 milimetre X 1.20 milimetre at weight 0.695 kilogram per running metre. Top and side track section 61.85 milimetre X 31.75 milimetre X 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre. Interlocking secion 40 milimetre X 18 milimetre X 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts excetra complete. - With colour anodising without box. (For Ground Floor) (Mangalwedha AO) 30 Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / amba white / cadbury brown / RBI red / ocean brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on a bed of 1:4 cement mortar including float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (For Ground Floor) (using NATURAL SAND). (Mangalwedha AO) 31 Providing and fixing pressure relief pipes of 110 milimetre diameter of asbestos cement / polyvinyl chloride as per drawing for reinforced cement concrete raft, galaries, returns, abutments, wing wall, excetra complete. (Mangalwedha AO) 32 Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings, approved face veneers 3 milimetre thick on both faces or as directed, all necessary beeds, moulding and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides and finishing with french polish, excetra complete. (For Ground Floor) (Mangalwedha AO) 33 Mazdoor Unskiled Heavy Male (Mangalwedha AO) 34 Providing first class burnt brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in plinth including bailling out water manually, striking joints on unexposed faces and pointing with cement mortar 1:3 on exposed faces and watering, excetra complete. (using NATURAL SAND). (Mangalwedha AO) 35 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 milimetre X 9 milimetre X 3 milimetre minimum size, crossings of mild steel flats of size 18 milimetre X 5 milimetre T or E section for runner of minimum 40 milimetre X 6 milimetre size for flange, mild steel flat for top runner of minimum size 40 milimetre X 12 milimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 milimetre, maximum spacing of vertical channels be 100 milimetre enclosed gate position and clear space of 150 milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting, excetra complete. (Indian Standard : 10521-1983). (For Ground Floor) (Mangalwedha AO) 36 Providing and fixing single bed of size 2025 milimetre long X 1000 milimetre wide X 650 milimetre deep with matress and pillow. Understructure - The legs are made of square tube of size 25 milimetre X 25 milimetre made out of mild steel sheet with a thickness of 1.2 milimetre. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2 milimetre thick cold rolled close annealed sheet having a L shaped structure to join the side panels and headboard to the leg. (Mangalwedha REST HOUSE) 37 Dinning Table - Providing & supplying teak wood Dining tablewith 6 chairs having top of size 6ft x 3ft. Top should finished with 1mm laminate. Chairs should have round back and cusion for seat.Rate Rate Approved by T.C.P.C.Satara WTB.25. (Mangalwedha REST HOUSE) 38 Providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (For Ground Floor) (using NATURAL SAND). (Mangalwedha REST HOUSE) 39 Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork, laying/ pumping, compacting and curing, excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed, excetra) (using NATURAL SAND). (Mangalwedha REST HOUSE) 40 Providing water proof bedding for flooring of bath and water closet 25 milimetre thick in cement mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs. 500/- including ponding test, excetra complete. (For Ground Floor) (using NATURAL SAND). (Mangalwedha REST HOUSE) 41 Providing and laying vitrified stone effect finish tiles having size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for dado and skirtingin required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (For Ground Floor) (using NATURAL SAND). (Mangalwedha REST HOUSE) 42 Providing and laying vitrified matt finish tiles of having size 590 milimetre to 605 milimetre X to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (For Ground Floor) (using NATURAL SAND). (Mangalwedha REST HOUSE) 43 Providing and fixing oval type under counter wash hand basin of 16 inch X 22 inch size and of special colour shed having telephonic black / colour granite of 18 milimetre thick fixed on black kadapaa frame work, including cromium plated coupling, bottle-trap using approved make oval type wash basin as per detailed drawing or as directed by Engineer In-charge, excetra complete. (For Ground Floor) (Mangalwedha REST HOUSE) 44 Providing and fixing Orissa type white glazed earrthenware 575 milimetre water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall, 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories excetra complete. (For Ground Floor) (Mangalwedha REST HOUSE) 45 Providing and fixing european type wall hung white water closet of approved make with push valve consealed type with cover plate 32 milimetre size of approved make including soil pipe, vent pipe upto outside face of wall, 100 milimetre diameter galvanised iron plug, bend, inlet pipe all fittings, cutting and making good walls, floors, excetra complete. (For Ground Floor) (Mangalwedha REST HOUSE) 46 Providing and preparing kitchen otta up to 75 centimetre width, made up from 30 milimetre thick and 75 centimetre high vertical support for Kadappa at one metre center to center of 25 milimetre thick both side polished Kadappa middle shelf and bottom of 20 milimetre thick one side polished Kadappa with facia patti of 20 milimetre X 50 milimetre Kadappa including all material, labour, cutting, fixing with cement mortar and araldite, all material labour cutting fixing with cement mortar and araldite curing polished and cleaning excetra complete. (For Ground Floor) (Mangalwedha REST HOUSE) 47 Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / amba white / cadbury brown / RBI red / ocean brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on a bed of 1:4 cement mortar including float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (For Ground Floor) (using NATURAL SAND). (Mangalwedha REST HOUSE) 48 Providing and fixing wall mixer with overhead shower,shower arm,hand shower with wall bracket having flow rate up to 12 litre per minute of Jaquar/ Cera/ Hindware/ Perryware or equivalentmake including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturers Green product and shall got approved from the Engineer In Charge.) (For Ground Floor) (Mangalwedha REST HOUSE) 49 Providing and fixing chromium plated bib cock with wall flange of approved make including necessary sockets / union nut, excetra complete. (For Ground Floor) (Mangalwedha REST HOUSE) 50 Providing and fixing chromium plated pillar cock long neck with aerator of approved make including necessary sockets / union nut, excetra complete. (For Ground Floor) (Mangalwedha REST HOUSE) 51 Providing and fixing 450 milimetre X 550 milimetre size superior type belgium mirror with 16 milimetre diameter nickel plated towel rod, excetra complete. (For Ground Floor) (Mangalwedha REST HOUSE) 52 Providing and fixing chromium plated towel rod 16 milimetre diameter and 75 centimetre in length including all accessories complete. (For Ground Floor) (Mangalwedha REST HOUSE) 53 Providing and fixing solid core flush door commerical type in single leaf 16 milimetre thick Bison panel cement bonded partical board including teak wood lipping, beading on all four edges, without ventilator commercial type of exterior grade as per detailed drawings, with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting three coats, excetra complete. (For Ground Floor) (Mangalwedha REST HOUSE) 54 Providing and laying in trenches 32 milimetre diameter chlorinated poly vinyl chloride pipe including necessary excavation, fittings, refilling trenches, excetra complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (Mangalwedha REST HOUSE) 55 Providing and fixing on walls / celling / floor, 20 milimetre diameter chlorinated poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (For Ground Floor) (Mangalwedha REST HOUSE) 56 Providing and laying 100 milimetre diameter salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. (Mangalwedha REST HOUSE) 57 Providing and fixing 10 centimetre poly vinyl chloride nahani trap with grating, excetra complete. (For Ground Floor) (Mangalwedha REST HOUSE) 58 Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (1-3-4) 59 Supplying and erecting mains with 2 x 4 sqmm FR solid/stranded copper PVC insulated wire laid in provided trunking as per specification no WG-MA/BW DSR item (1-3-3) 60 Supplying and erecting mains with 1 x 2.5 sqmm FR stranded copper PVC insulated wire green in color as continuous earth wire laid in provided trunking as per specification no WG-MA/BW (1-3-3 & note) 61 Supplying and erecting mains with 2 x 2.5 sqmm FR solid/stranded copper PVC insulated wire laid in provided trunking as per specification no WG-MA/BW DSR item (1-3-2) 62 Supplying and erecting mains with 2 x 1.5 sqmm FR solid/stranded copper PVC insulated wire laid in provided trunking as per specification no WG-MA/BW DSR item (1-3-1) 63 Supplying and erecting mains with 1 x 1.5 sqmm FR solid/ stranded copper PVC insulated wire laid in provided trunking as per specification no WG-MA/BW DSR item (1-3-1 & note) 64 Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work /false ceiling /false flooringas per specification No. WG-MA/CC.m DSR item (1-1-10) 65 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32mm with accessories on wall/ceiling as per specification No: WG-MA/CON. DSR item (1-2-8) 66 Point wiring for light/bell hybrid type (Surface type under false ceiling & concealed type for drops & switch boards on walls) in min 20 mm PVC conduit/ casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing & required accessories as per specification No: WGPW/HW Pt. (1-7-15) 67 Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW (1-7-19) 68 Point wiring for light/bell hybrid type (Surface type under false ceiling & concealed type for drops & switch boards on walls) in min 20 mm PVC conduit/ casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing & required accessories as per specification No: WGPW/HW Pt. (1-7-15) Note (2Way Point) 69 (New)Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing ncapping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW (1-7-16) 70 (New)Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing andrequired accessories as per specification No: WG-PW/SW (1-7-20) 71 Supplying and erecting modular type (two module) electronic step regulatorfor fan, duly erected on provided plate and box with wiring connections complete.(1-6-23) 72 Wiring for plug on board with Switch socket surface/ concealed type, copperwiring and earthing and with modular accessories as per specification No: WGPW/CW (1-7-26) 73 Supplying and erecting modular type switch 6A / 10A duly erected on providedplate and box with wiring connections complete.(1-6-1) 74 Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (1-6-10 ) 75 Supplying and erecting modular type switch 16A duly erected on provided plateand box with wiring connections complete.(1-6-2) 76 Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-11 ) 77 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (1-6-40) 78 Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected (1-6-32) 79 Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected (1-6-30) 80 Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected (1-6-28) 81 (New)Supplying and erecting LED square / circular Max. 18 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuserhaving system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clipscomplete with 3 years warranty. (2-1-5) 82 (New)Supplying and erecting LED square / circular Max. 11 W downlighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f.>0.95, operating range of 120-270V, surge protection of2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clipscomplete with 3 years warranty.(2-1-3) 83 Supplying and erecting ding dong /electronic musical type call bell withheavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/ sunmica block of suitable size.(2-3-13) 84 Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200mm complete erected in position as per specification no. FG-FN/CF (2-10-21) 85 Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x75 mm long with necessary materials for ceiling fan. (2-11-2) 86 Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. (2-11-6) 87 Supplying and erecting CRCA powder coated corridor/passage light LE fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCTupto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10 %, p.f > 0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs at L70B50, including driver, with end caps on provided PVC Block / woodenboard with 3 years warranty. (2-1-17) 88 Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg.,Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.(2-1-16) 89 Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work /false ceiling /false flooringas per specification No. WG-MA/CC.m DSR item (1-1-10) 90 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32mm with accessories on wall/ceiling as per specification No: WG-MA/CON. DSR item (1-2-8) 91 Supplying and installing cat-6 cable suitable for networking as per specificationno. WG-COC/NC (1-10-1) 92 Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG-6 as per specification No. WG-TW (1-8-19) 93 Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367mm) as per specification No. WG-NAS/RAK (1-12-17) 94 Supplying, fixing, and configuring 8-ports 1 G unmanaged gigabit POE switch erected in provided rack complete.(1-11-1) 95 Supplying and fixing tool-less IO (Ethernet) flush/surface type in providedmodular box as per specification no. WG-NAS/IO (1-12-2) 96 Supplying and erecting PVC Surface modular switch box with doublemounting plate for 2 module duly erected.(1-6-27) 97 Supplying, installing and testing UTPconnector (RJ-45) as per specification No. WG-NAS/UTPC. (1-12-1) 98 Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC (1-10-16) 99 Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete. (1-6-14) 100 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-6) 101 Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. (1-4-3) 102 Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thicknesssuitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erectedon angle iron /GI frame. (5-4-13) 103 Supplying, erecting & marking DPMCB 40A to 63A, C-series with rated short-circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-8) 104 Supplying and erecting plywood 12 mm thick fixed to wall oron provided panel board with necessary materials such asscrews, wall fasteners supports, nuts bolts etc complete. m2 (6-1-12) 105 Supplying and erecting single pole and neutral distribution board (SPNDB),with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs,with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame as per specification no. SW-SWR/MCBDB (5-4-9) 106 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, withdoor, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame as per specification no. SW-SWR/MCBDB (5-4-8) 107 Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification no. SW-SWR/MCB (5-3-6) 108 Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification no. SW-SWR/MCB (5-3-2) 109 Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification no. SW-SWR/MCB (5-3-3) 110 Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP (9-1-2) 111 Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete. 112 Royalty charges for natural sand which is used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.) (Mangalwedha AO) 113 Royalty charges for natural sand which is used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.) (Mangalwedha B&C ICDS) 114 Royalty charges for natural sand which is used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.) (Mangalwedha REST HOUSE) 115 Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune. 116 Goods and Services Tax.
