Tender For Construction And Development Of Bhairavnath Sanskrutik Bhavan Part2 At Maan Talmulshi Zilla Pune- 1 NAME OF SUB WORK -- MAIN WORK 2 ITEM NO.: 1 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping. compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-31 NS, PgNo 179) (STATE SSR) Item Spec: (Bd.F.5 Page No. 300 and B.7, Page.No. 38) RA NO.: 1 3 ITEM NO.: 2 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed).... (INo25-50 NS, PgNo 181) ( STATE SSR) Item Spec: (Bd.F.6 Page No. 300 and B.7, Page No.38)RA NO.: 2 4 ITEM NO.: 3 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite / quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed)....(INo25-70 NS, PgNo 182) ( STATE SSR) Item Spec: (Bd.F.8 Page No. 302 and B.7, Page No.38) 5 ITEM NO.: 4 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed)....(INo26-17 NS, PgNo 185) ( STATE SSR) Item Spec: (Bd.F.11 Page No. 304 and B.7, Page No. 38) RA NO.: 3 6 ITEM NO.: 5 Providing and fixing in position TMT - FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete..... (INo26-33, PgNo 306)188) (STATE SSR) Item Spec: (Bd.F 17, Page No.RA NO.: 4 7 ITEM NO.: 6 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc.Complete.....(INo27-01, PgNo 197(STATE SSR) ItemSpec: (Bd.G. 1 Page No. 313)RA NO.: 5 8 ITEM NO.: 7 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.....(INo32-03, PgNo 209) (STATE SSR)Item Spec: (Bd. L.2 Page No. 368 9 ITEM NO.: 8 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.....(INo32-11, PgNo 209) (STATE SSR) Item Spec: (Bd.L.7 Page No. 369) RA NO.: 6 10 ITEM NO.: 9 Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger /Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger /Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9% with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) ....(INo36-20, PgNo 228) (STATE SSR) Item Spec: (As directed by Engineer in charge.) 11 ITEM NO.: 10 Providing and applying two coats of exterior white weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning preparing the plaster surface, applying primer coat, scaffolding if necessary. and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary.... (INo35-26 PgNo 225) (STATE SSR) Item Spec: (As directed by Engineer in charge.) 12 ITEM NO.: 11 Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 * 35 thick with lock and bottam rail 195 * 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete.... (INo39-08, PgNo 246) (STATE SSR) Item Spec: (Bd-T-11 & 12, Page No. 482-483) 13 ITEM NO.: 12 Providing and fixing in position (as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 * 38.1 * 0.9 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 * 31.75 * 1.3 mm at weight 1.070 kg/Rmt.. Top and side track section 92 * 31.75 * 1.3 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 * 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 * 18 * 1.1 mm at weight 0.469 kg/Rmt. and handle and top section 40 * 18 * 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. Withcolour Anodising with box....(INo39-41, PgNo 253) ( STATE SSR) Item Spec: (As directed by engineer-in-charge.) 14 ITEM NO.: 13 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete..... (INo40-01, PgNo 264) (STATE SSR) Item Spec: (Bd.U.1 Page No. 537) 15 ITEM NO.: 14 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding grinding, finishing, buffing to stainless steel pipe etc. complete....(INo40-07, PgNo 264) (STATE SSR) Item Spec: (As directed by Engineer Incharge) 16 ITEM NO.: 15 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M. 1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.....(INo31-04, PgNo 205) (STATE SSR) Item Spec:(As directed by Engineer in charge.) RA NO.: 7 17 ITEM NO.: 16 Providing and laying telephone black /Amba White/Cadburybrown/Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.....(INo33-68, PgNo 220) (STATE SSR) Item Spec: (As directed byEngineer in charge.) 18 ITEM NO.: 17 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown/RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.....(INo33-35, PgNo 216) (STATE SSR) Item Spec: (Bd. M.22 B/Page No. 390) RA NO.: 8 19 ITEM NO.: 18 Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc .complete.....(INo33-59, PgNo 219) ( STATE SSR) Item Spec: (Bd. M-12 page No. 386) RA NO.: 9 20 ITEM NO.: 19 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. Complete.....(INo33-67, PgNo 220) (STATE SSR) Item Spec: (Bd. M-12 page No. 385) RA NO.: 10 21 ITEM NO.: 20 Providing and laying ceramic tiles having size 30 cm. X 45 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. Complete..... (INo33-26, PgNo 215) (STATE SSR) Item Spec: (Bd.M.13 Page No. 386.) RA NO.: 11 22 ITEM NO.: 21 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.....(INo41-63, PgNo 272) (STATE SSR) Item Spec: (Bd.V.30 Page No. 565 23 ITEM NO.: 22 Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall....(INo41-57 , PgNo 271) (STATE SSR) Item Spec: (Bd.V.23 Page No. 562) 24 ITEM NO.: 23 Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m).... (INo41-78, PgNo 273) (STATE SSR) Item Spec: (As directed by Engineer in charge.) 25 ITEM NO.: 24 Providing and fixing Orissa type white glazed earthenware water closet pan of size 260mm x 440mm x 580mm with approved make Slim wall hung cistern with installation kit including S or P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete.....(INo48-42, PgNo 316) (STATE SSR) Item Spec: 9415 (As directed by En-gineer in charge.) 26 ITEM NO.: 25 Providing and fixing Shower Head, with shower arm of approved make mixer of including all necessary pipe fittings and connections etc. complete as directed by Engineer in charge..... (INo48-34, PgNo 315) (STATE SSR) Item Spec: (As directed by En-gineer in charge.) 27 ITEM NO.: 26 Providing and laying in walls/ceilings/floors 25 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 2.49 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete..... (INo43-03 , PgNo 286) (STATE SSR) Item Spec: (Bd.V.5 Page No. 551) 28 ITEM NO.: 27 Providing and applying Texture plaster with finishing with Purlina / Rustic texture material (with texture material of Asian / Renava / Nitco/Temtex or equivalent company make) in 3 to 4 millimeter thickness on previously finished plastered surface including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface scaffolding etc.complete.....(INo32-32, PgNo 211) (STATE SSR) Item Spec: (As directed by Engineer in charge.) 29 ITEM NO.: 28 Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand)....(INo33-54, PgNo 219) (STATE SSR) Item Spec: (Bd. M.) 30 ITEM NO.: 29 Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S.13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment)....(INo42-87, PgNo 283) (STATE SSR) Itern Spec: (As directed by Engineer Incharge) 31 ITEM NO.: 30 Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S.13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment)... (INo42-85, PgNo 283) (STATE SSR) Item Spec: (As directed by Engineer Incharge) 32 ITEM NO.: 31 Providing and laying in walls/ceilings/floors 32 mm dia, medium grade having embossed as ISI Mark galvanised iron pipes of 3.20 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete..... (INo43-04 No. 551),PgNo 286) 286) ( (STATE SSR) Item Spec: (Bd.V.5 Page - 33 NAME OF SUB WORK -- Testing ChargesEstimate 34 ITEM NO.: 1 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes)..... (INo19-VQC, PgNo 584) (STATE SSR) Item Spec: (As per Standard Specification) 35 ITEM NO.: 2 BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength(Set of 5 Bricks), Efflorescence (Set of 5 Bricks)..... (INo13-VQC, PgNo 584) (STATE SSR) Item Spec: (As per Standard Specification) 36 ITEM NO.: 3 STEEL BAR TESTING Upto 16 mm (Set of 3 Bars)....(INo72-VQC, PgNo 586) (STATE SSR) Item Spec: (As per Standard Specification) 37 ITEM NO.: 4 STEEL BAR TESTING Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend / Rebend Test, Proof Stress.)....(INo73-VQC, PgNo 586) (STATE SSR) Item Spec: (As per Standard Specification)
